LCPL

Last updated
Reinforcements land on Guadalcanal.jpg
United States Marine Corps reinforcements at Guadalcanal debark from an LCP(L).
Class overview
NameLanding Craft Personnel (Large)
Builders Higgins Industries, New Orleans, Louisiana, USA
Operators
Preceded byVarious ship's boats and cutters
Succeeded byLCP(R), LCVP
Subclasses
  • Royal Navy model
  • US model
Built1940-1943
Active0
Preserved0
General characteristics
TypeLanding craft
DisplacementUS Model: 13,500 pounds (light), 21,600 pounds (loaded)
Length36 ft 8 in
Beam10 ft 10 in
Draught
  • 2 ft 6 in aft. light
  • 3 ft 6 aft. loaded
Ramps0
Propulsion
Speed
  • RN model: 9-11 kts. (max)
  • US model: 8 kts. (fully loaded)
Range
  • RN model: 120 miles at full speed (loaded)
  • US model: 50 miles (gasoline), 130 miles (diesel)
Capacity6,700–8,100 pounds (3,039–3,674 kg)
Troops
  • RN model: 25 troops
  • US model: 36 troops
Crew
ArmamentUS model: 2 x Browning .30 cal. machine guns, or US manufactured Lewis .30 cal. machine guns RN model: 1 x .303 cal. Lewis Gun
Armor3 x 10 lb. plates on bulkheads (fore of the .30 cal. cockpits, of the troop well and the engine space.
Notesfrom US Navy ONI 226 Allied Landing Craft and Ships, US Government Printing Office, 1944.

The Landing Craft Personnel (Large) or LCP (L) was a landing craft used extensively in the Second World War. Its primary purpose was to ferry troops from transport ships to attack enemy-held shores. The craft derived from a prototype designed by the Eureka Tug-Boat Company of New Orleans, Louisiana, USA. Manufactured initially in boatyards in and around New Orleans, as requirements grew it was produced in a number of yards around the United States. Typically constructed of pine planks and plywood, and fitted with some armor plate, this shallow-draft boat with a crew of 3 could ferry an infantry platoon of 36 to shore at 8 knots (13 km/h). Men generally entered the boat by walking over a gangplank from the boat deck of their troop transport as the LCP(L) hung from its davits. When loaded, the LCP(L) was lowered into the water. Soldiers exited the boat by jumping or climbing down from the craft's bow or sides.

Contents

Origins

During the 1930s, the United States Marine Corps (USMC) sought boats practical for landing troops on beaches. In 1936, the USMC conducted experiments with new types of boats, lighters, and launches. Many craft were considered coming from the Navy's Bureau as well as commercial fishing boat designs. Included in these experiments were some prototypes where, upon beaching, a ramp was deployed over rollers on the bow. [1] A few boats were overwhelmed by the surf and others did not prove practical, but the 28 feet (9 m) craft designed by the Eureka Tug-Boat Company of New Orleans was both a good sea boat and superior at beaching.

The craft was based on the company's 1926 spoonbill-bowed craft used by trappers in the bayous of the Mississippi River delta. [2] The boat's draft was rather shallow, 18 inches (46 cm), and it could cut through vegetation and slide over logs without ruining its propeller. It could also run up on shore and extract itself damage-free. As part of sales demonstrations, boats were often run up on the seawalls of Lake Pontchartrain. (The craft was also infamous among law enforcement along the Gulf Coast as a vehicle for rum-runners.) [3] [4]

The Marines' specifications at the time were for boats operated by a crew of 6 that could carry a squad of 12 men. Such boats should be able to achieve 15 knots (17 mph; 28 km/h), and to be hoisted on the US Navy's standard davits. [5] The general lines of the boat were accepted by the USMC, and in September 1940 Andrew J. Higgins, president of the Eureka Tug-Boat Company, was contracted to build a slightly larger craft to carry 24 fully equipped troops, or two squads. He produced the 32 feet (10 m) Eureka or Higgins boat. [6] This was the craft first used in American Fleet Landing Exercises in 1941.

A Eureka Boat, an early model of the LCP(L), used in commando raids. This image features Jack Churchill leading a charge armed with a broadsword (far right). Jack Churchill leading training charge with sword.jpg
A Eureka Boat, an early model of the LCP(L), used in commando raids. This image features Jack Churchill leading a charge armed with a broadsword (far right).

Before the USMC received their boats, the British Admiralty’s need for a raiding craft brought the first enquiries for an even larger boat. Purchasing agents from Britain had become aware of Andrew Higgins’ Eureka boats; enquiries were made and a film of the Eureka was sent to the Admiralty in London. The German occupation of France had changed British procurement plans dramatically. The Admiralty's Inter-Service Training and Development Centre wanted a 36 ft 8 in (11.18 m) craft, intending the boat to carry a full British army platoon and two or three attached signallers or assault engineers. An initial order for 136 was placed, with the first 50 delivered to Britain in October 1940. [7] Higgins had already built these boats on spec and is said to have preferred this larger craft. Further US procurements were of this larger boat, and thus the LCP(L) was the forerunner of all American LCP types. [8]

The LCP(L)s were also known as Eurekas or R boats. Before 1942, The USMC referred to them as T Boats. [9] They were American-made landing craft that could carry up to 36 troops. Unlike later landing craft, the LCP(L)s did not have ramps at the bow, so the troops had to jump over the sides to get out. The boats themselves were made of plywood but had armored bulkheads. They were invented by Louisiana native Andrew Higgins before the war and were designed with a shallow draft to operate in swamps. But, it turned out that the design was also excellent for operating on shallow beaches. [10]

This boat, an early example from the Eureka Tug-Boat Company, was the progenitor of thousands of Second World War landing craft. LCPL on Seawall.jpg
This boat, an early example from the Eureka Tug-Boat Company, was the progenitor of thousands of Second World War landing craft.

Manning the LCP(L)

In US Navy or US Coast Guard service, the craft's crew comprised two gunners and the coxswain. [11] Though the gunners would normally occupy the two gunner's cockpits, forward, during landing, they had other duties also. One acted as the bowman while the other served as the mechanic. The coxswain was in charge of the boat and crew. His position was at the wheel directly behind the gunner's cockpits and only slightly off-set to the port side. From here he steered and operated engine controls.

The craft's raked bow made beaching comparatively easy, and the craft came off without difficulty when unloaded, though it could snag on rocks or poor ground as any other small boat would. The LCP(L) could be loaded from the boat deck, [12] before launching, "unless otherwise specified by the warning plate in the boat", [13] for its construction as much as its light weight made this speeding up of the launching-load time possible. Other craft, especially those with a ramp like the LCV and LCVP, were structurally weak in the bow and could not be loaded before lowering from davits; personnel being transported in these types climbed down scramble nets into these boats.

The 3-man crew of a British LCP(L) was led by a Leading Seaman or Royal Marine Corporal coxswain who steered the boat and operated engine controls on the port side of the cockpit. Beside him was the Lewis gunner who also acted as bowman handling any rope-work forward. The third man was a mechanic who might also handle stern ropes. At other times LCP(L)s might be led or towed by coastal forces craft when a raid was within reasonable range of a sally port. A number of these raids were made in 1940 to 1942 by British forces, sometimes using LCP(L)s though more often going ashore by canoe. The first major landing from LCP(L)s in Europe took place in August 1942 when the Canadians with elements of the British army and Royal Marines landed at Dieppe. The fortunes of the LCP(L) flotillas showed here how units and even individual craft could have very different luck in a landing.

US Marines climb down a scramble net to an LCP(L) during preparations in the Fiji Islands for the Guadalcanal Campaign that would take place in August 1942. These men appear to be filling a returned craft as first-wave troops would have entered the boat prior to its being lowered to the water. GuadLandingRehearse.jpg
US Marines climb down a scramble net to an LCP(L) during preparations in the Fiji Islands for the Guadalcanal Campaign that would take place in August 1942. These men appear to be filling a returned craft as first-wave troops would have entered the boat prior to its being lowered to the water.

Successors

Two significant further developments of the LCP(L) were produced, also designed by Andrew Higgins. These retained the dimensions of the LCP(L) to allow use from the same launch platforms. The first development was the Landing Craft, Personnel (Ramped) (LCP(R)), which added a bow ramp to the LCP(L) design for faster egress. The concept came from the Japanese Daihatsu-class ramped landing craft. The second development, the most-produced of the three, was the Landing Craft, Vehicle and Personnel (LCVP). This widened the bow to the full width of the craft to maximize the ramp size and speed of egress. The LCVP is the craft most referred to as a "Higgins Boat", although its two predecessors and a PT boat design were also developed and produced by Higgins.

See also

Notes

  1. ↑ Fergusson, p.37
  2. ↑ Ladd, 1976, p.24
  3. ↑ "LCPL - Landing Craft, Personnel, Large". Archived from the original on 2003-04-09. Retrieved 2013-11-15.
  4. ↑ Fergusson, p.
  5. ↑ Friedman, p. 75.
  6. ↑ Maund, pp. 62-63
  7. ↑ Ladd, p. 24
  8. ↑ Ladd, p. 24
  9. ↑ Miller p. 57.
  10. ↑ DeFelice, p. 120
  11. ↑ US Navy ONI
  12. ↑ Buffetaut, p. 28
  13. ↑ US Navy ONI

Related Research Articles

<span class="mw-page-title-main">Landing craft</span> Seagoing watercraft

Landing craft are small and medium seagoing watercraft, such as boats and barges, used to convey a landing force from the sea to the shore during an amphibious assault. The term excludes landing ships, which are larger. Production of landing craft peaked during World War II, with a significant number of different designs produced in large quantities by the United Kingdom and United States.

<span class="mw-page-title-main">Landing Vehicle Tracked</span> Amphibious transport vehicle family from World War II

The Amphibious Vehicle, Tracked (LVT) is an amphibious warfare vehicle and amphibious landing craft, introduced by the United States Navy and United States Marine Corps. The United States Army, Canadian Army and British Army used several LVT models during World War II, and referred to those vehicles as "Landing Vehicle, Tracked."

LCVP (United States) US built landing craft used extensively in amphibious landings in World War II

The landing craft, vehicle, personnel (LCVP) or Higgins boat was a landing craft used extensively by the Allied forces in amphibious landings in World War II. Typically constructed from plywood, this shallow-draft, barge-like boat could ferry a roughly platoon-sized complement of 36 men to shore at 9 knots (17 km/h). Men generally entered the boat by climbing down a cargo net hung from the side of their troop transport; they exited by charging down the boat's lowered bow ramp.

<span class="mw-page-title-main">Higgins Industries</span> US boat manufacturer

Higgins Industries was the company owned by Andrew Higgins based in New Orleans, Louisiana, United States. Higgins Industries is most famous for the design and production of the Higgins boat, an amphibious landing craft referred to as LCVP, which was used extensively in the Allied forces' D-Day Invasion of Normandy. Higgins also manufactured PT boats, and produced the first American airborne lifeboat, the model A-1 lifeboat. The company also had a subsidiary architectural firm that designed manufacturing buildings - most famously the Michoud Assembly Facility.

<span class="mw-page-title-main">Andrew Higgins</span> American businessman (1886–1952)

Andrew Jackson Higgins was an American businessman and boatbuilder who founded Higgins Industries, the New Orleans-based manufacturer of "Higgins boats" during World War II. The company started out as a small boat-manufacturing business, and became one of the biggest industries in the world with upwards of eighty thousand workers and government contracts worth nearly three hundred fifty million dollars. General Dwight Eisenhower is quoted as saying, "Andrew Higgins ... is the man who won the war for us. ... If Higgins had not designed and built those LCVPs, we never could have landed over an open beach. The whole strategy of the war would have been different." Adolf Hitler recognized his heroic war efforts in ship production and bitterly dubbed him the "New Noah".

Landing Craft Utility Type of boat designed for transporting amphibious forces and cargo to shore

A Landing Craft Utility (LCU) is a type of boat used by amphibious forces to transport equipment and troops to the shore. They are capable of transporting tracked or wheeled vehicles and troops from amphibious assault ships to beachheads or piers.

Landing Craft Assault Landing craft used extensively in World War II

Landing Craft Assault (LCA) was a landing craft used extensively in World War II. Its primary purpose was to ferry troops from transport ships to attack enemy-held shores. The craft derived from a prototype designed by John I. Thornycroft Ltd. of Woolston, Hampshire, UK. During the war it was manufactured throughout the United Kingdom in places as various as small boatyards and furniture manufacturers.

<span class="mw-page-title-main">Landing Craft Mechanized</span> Landing craft designed for carrying vehicles

The landing craft mechanized (LCM) is a landing craft designed for carrying vehicles. They came to prominence during the Second World War when they were used to land troops or tanks during Allied amphibious assaults.

Landing ship, infantry British troopship class

A landing ship, infantry (LSI) or infantry landing ship was one of a number of types of British Commonwealth vessels used to transport landing craft and troops engaged in amphibious warfare during the Second World War. LSIs were operated by the Royal Navy, British Merchant Navy, Royal Canadian Navy, Royal Indian Navy, and Royal Australian Navy. They transported British Commonwealth and other Allied troops in sea assaults and invasions throughout the war.

Landing Craft Infantry Type of landing craft used by the Allies during World War II

The Landing Craft Infantry (LCI) were several classes of landing craft used by the Allies to land large numbers of infantry directly onto beaches during World War II. They were developed in response to a British request for seagoing amphibious assault ships capable of carrying and landing substantially more troops than their smaller Landing Craft Assault (LCA). The result was a small steel ship that could land 200 men, traveling from rear bases on its own bottom at a speed of up to 15 knots.

Daihatsu-class landing craft

The Daihatsu-class or 14 m landing craft was a type of landing craft used by the Imperial Japanese Army from 1937 to 1945, in the Second Sino-Japanese War and World War II. It was designated the "Type A" landing craft by the United States.

<span class="mw-page-title-main">Amphibious warfare ship</span> Ship used in amphibious warfare

An amphibious warfare ship is an amphibious vehicle warship employed to land and support ground forces, such as marines, on enemy territory during an amphibious assault.

The Fleet Landing Exercises, or FLEX were amphibious landing exercises conducted by the United States Navy and United States Marine Corps between 1935 and 1941. The purpose of these exercises was to formulate a workable amphibious warfare doctrine. The development of the necessary craft and other equipment, and the proper tactical deployment of them were also results. Finally, the exercises demonstrated the usefulness of a standing body of Marines, the Fleet Marine Force, specially prepared for amphibious expeditions.

Motor landing craft British landing craft

The motor landing craft (MLC) was a vessel used in the 1920s and 30s. It was specifically designed to deliver a tank to shore and may be considered the predecessor of all Allied landing craft mechanised (LCM). The MLC also saw action in the first year of the Second World War. Its primary purpose was to ferry tanks, troops and stores from ships to shore. The craft derived from discussions of the Landing Craft Committee; the prototype was designed by J. Samuel White of Cowes.

LCM 1 Landing craft used in WWII

The Landing Craft, Mechanised Mark 1 or LCM (1) was a landing craft used extensively in the Second World War. Its primary purpose was to ferry tanks from transport ships to attack enemy-held shores. Ferrying troops, other vehicles, and supplies were secondary tasks. The craft derived from a prototype designed by John I. Thornycroft Ltd. of Woolston, Hampshire, UK. During the war it was manufactured in the United Kingdom in boatyards and steel works. Constructed of steel and selectively clad with armour plate, this shallow-draft, barge-like boat with a crew of 6, could ferry a tank of 16 long tons to shore at 7 knots (13 km/h). Depending on the weight of the tank to be transported the craft might be lowered into the water by its davits already loaded or could have the tank placed in it after being lowered into the water.

LCM (2) Vessel used for amphibious landings by the US in World War Two

The Landing Craft, Mechanized Mark 2 or LCM (2) was a landing craft used for amphibious landings early in the United States' involvement in the Second World War. Though its primary purpose was to transport light tanks from ships to enemy-held shores, it was also used to carry guns and stores. The craft was designed by the Navy's Bureau of Construction and Repair and the initial production contract was let to the American Car & Foundry Company. A total of 147 were built by this company and Higgins Industries. Because of its light load capacity and the rapid production of the superseding LCM (3), the LCM (2) quickly fell out of use following the Allied invasion of North Africa in 1942.

Landing Barge, Kitchen

The Landing Barge, Kitchen or LBK was a landing craft used to support amphibious landings in North Western Europe during and after the Normandy invasion in the Second World War. Its primary purpose was to provide hot meals to the crews of the many minor landing craft not fitted with galley facilities. Constructed of steel, this shallow-draft lighter had storage and serving space to feed 900 men for one week. The kitchen capacity was able to provide 1,600 hot meals and 800 cold meals a day.

Ramped cargo lighter Canadian cargo landing craft

The ramped cargo lighter or RCL was a landing craft used in many parts of the world during the Second World War. Designed in Canada and manufactured in Vancouver and Toronto, its primary purpose was lighterage work following assault landings. The RCL also provided water transport in coastal operations. These lighters were built in sections to simplify shipping and assembled in the theatre of operations.

<span class="mw-page-title-main">Landing Craft Vehicle Personnel</span>

A Landing Craft Vehicle Personnel or Landing Craft, Vehicle, Personnel (LCVP) is any of a variety of amphibious landing craft designed to transport troops or armoured vehicles from ship to shore during amphibious landings.

<span class="mw-page-title-main">Wooden boats of World War II</span> United States wooden boats used in World War II

Splinter fleet or Splinter navy was a nickname given to the United States wooden boats used in World War II. The boats served in many different roles during the war. These boats were built in small boatyards on the West coast and East coast, Great Lakes and the Gulf of Mexico. They could be built quickly, in just 60 to 120 days. Most of the boats were built by boatyards that already had the tools and knowledge from building yachts, sailboats and motor boats. Many were built by craftsmen in family-owned small businesses. Under the Emergency Shipbuilding Program and War Shipping Administration contracts went out to over fifty boatyards across the country. The boats were built for the US Navy, the United States Army Air Forces, United States Coast Guard, and US Army. Some of the wooden boats went to Allied nations on the Lend-Lease program.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.