Sapper

Last updated

Modern sapper equipment Modern sapper equipment.jpg
Modern sapper equipment

A sapper, also called a combat engineer, is a combatant or soldier who performs a variety of military engineering duties, [1] such as breaching fortifications, demolitions, bridge-building, laying or clearing minefields, preparing field defenses, and road and airfield construction and repair.

Contents

Sappers are also trained and equipped to serve secondarily as provisional infantry. [2]

Sappers facilitate and support the movement, defense, and survival of superordinate and allied forces, and impede those of enemies.

The term "sapper" is used in the British Army and Commonwealth nations, the U.S. military, and the militaries of other countries.

Historical origin

Sapper

Soldiers of No 2 Field Company, Bombay Sappers and Miners on duty in China in 1900. The mule carries the tools required for field engineering tasks. No.2 Company, Bombay Sappers and Miners, China 1900.jpg
Soldiers of No 2 Field Company, Bombay Sappers and Miners on duty in China in 1900. The mule carries the tools required for field engineering tasks.

A sapper, in the sense first used by the French military, was one who dug trenches to allow besieging forces to advance towards the enemy defensive works and forts over ground that is under the defenders' musket or artillery fire. It comes from the French word sapeur, [3] itself being derived from the verb saper (to undermine, to dig under a wall or building to cause its collapse). This digging was referred to as sapping the enemy fortifications. Saps were excavated by brigades of trained sappers or instructed troops. When an army was defending a fortress with cannons, they had an obvious height and therefore range advantage over the attacker's guns. The attacking army's artillery had to be brought forward, under fire, so as to facilitate effective counter-battery fire.

This was achieved by digging what the French termed a sappe [4] (derived from the archaic French word for spade or entrenching tool). [5] [6] Using techniques developed and perfected by Vauban, the sappers began the trench at such an angle so as to avoid enemy fire enfilading the sappe by firing down its length. As they pressed forward, a position was prepared from which a cannon could suppress the defenders on the fort's bastions. The sappers would then change the course of their trench, zig-zagging toward the fortress wall. Each leg brought the attacker's artillery closer until the besieged cannon would be sufficiently suppressed for the attackers to breach the walls. Broadly speaking, sappers were originally experts at demolishing or otherwise overcoming or bypassing fortification systems.

Miner

The fort of Ghazni which fell as a result of mining by a mixed contingent of the Bombay and Bengal Sappers during the First Afghan War on 23 July 1839. Ghuznee.jpg
The fort of Ghazni which fell as a result of mining by a mixed contingent of the Bombay and Bengal Sappers during the First Afghan War on 23 July 1839.

An additional term applied to sappers of the British Indian Army was "miner." The native engineer corps were called "sappers and miners," for example, the Royal Bombay Sappers and Miners. The term arose from a task done by sappers to further the battle after saps were dug. The saps permitted cannons to be brought into firing range of the besieged fort and its cannons, but often the cannons themselves were unable to breach the fort walls. The engineers would dig a tunnel from the forward-most sap up to and under the fort wall, then place a charge of gunpowder and ignite it, causing an explosion that would destroy the wall and permit attacking infantry to close with the enemy. This was dangerous work, often lethal to the sappers, and was fiercely resisted by the besieged enemy. Since the two tasks went hand in hand and were done by the same troops, native Indian engineer corps came to be called "sappers and miners".

Specific usage

Commonwealth of Nations

A sapper of the Royal Engineers watches as soldiers reinforce security at FOB (Forward Operating Base) Shawqat in Afghanistan. Royal Engineers Working at FOB Shawqat MOD 45155378.jpg
A sapper of the Royal Engineers watches as soldiers reinforce security at FOB (Forward Operating Base) Shawqat in Afghanistan.

Sapper (abbreviated Spr) is the Royal Engineers' equivalent of private. This is also the case within the Indian Army Corps of Engineers, Pakistan Army Corps of Engineers, Royal Canadian Engineers, Royal Australian Engineers, [7] South African Army Engineer Formation, Jamaica Defence Force Engineer Regiment, and Royal New Zealand Engineers. The term "sapper" was introduced in 1856, when the Corps of Royal Sappers and Miners was amalgamated with the officer corps of the Royal Engineers to form the Corps of Royal Engineers.

During the course of the First World War, some Royal Marines also took the rank of Sapper. This was adopted as tradition in the Royal Marine Divisional Engineers of the Royal Naval Division. [8]

Australia

Jisr Benat Yakub repaired (September 1918) Benat Yakub bridge.jpg
Jisr Benat Yakub repaired (September 1918)

During the Sinai and Palestine Campaign of World War I, Australian sappers repaired a bridge at the historic crossing of the Jordan River at Jisr Benat Yakub (also known as Jacob's Ford). Here the retreating Ottoman and German rearguard had blown up the bridge's central arch, which was repaired in five hours by sappers attached to the Australian Mounted Division. While the light horse brigades forded the river, continuing the Desert Mounted Corps' advance to Damascus, the sappers worked through the night of 27/28 September 1918, to repair the bridge to enable the division's wheeled vehicles and guns to follow on 28 September. [9] [10] [11]

Canada

In the Canadian Forces, sappers exist both in the regular force and reserve force. The rank of sapper is used instead of private trained to signify completion of the basic Engineer training course. Canadian sappers have been deployed in many major conflicts in recent history including World War I, World War II, the Korean War, and the War in Afghanistan. The roles of a sapper entail: Bridging with the ACROW or Medium Girder Bridge as well as non-standard bridge construction; obstacle and defensive construction; enemy obstacle reduction and clearance, mine warfare; explosive ordnance disposal; water supply using the reverse-osmosis water purification unit; building and maintaining roadways and airfields; combat diving; tactical breaching; and camp construction. Ultimately, the objective of the sappers is to facilitate the living, moving, and to fight for friendly troops on the battlefield and denying the same to enemy forces. The motto of the Canadian Military Engineers is Ubique (Latin : everywhere) a motto shared with the Royal Canadian Artillery.

Indian Army

The term "sappers", in addition to the connotation of rank of engineer private, is used collectively to informally refer to the Engineer Corps as a whole and also forms part of the informal names of the three combat engineer groups, viz. Madras Sappers, Bengal Sappers and the Bombay Sappers. Each of these groups consist of about twenty battalion-sized engineer regiments and additional company-sized minor engineer units. The three sapper groups are descended from the sapper and miner groups of the East India Company and later the British Indian Army of the British Raj.

Israel

In the Israel Defense Forces a sapper (in Hebrew: פלס, palas) is the military profession of a combat soldier who went through basic combat engineering training. Most of the sappers are soldiers of the Combat Engineering Corps, but there are also infantry sappers, who are part of the infantry brigades and are organized in engineering companies called פלחה"ן (palchan). These companies are integral part of the infantry brigades. Combat engineering corps sappers are arranged in battalions.

Each sapper goes through high level infantry training, which qualifies him as rifleman 06 (רובאי 06). Combat engineering sappers are qualified as "sapper 06" (פלס 06). They are skilled in infantry combat, basic sabotage, landmine planting and demining, use of explosives, breaching and opening routes, trench warfare, and operating the IDF Puma combat engineering vehicle. Combat engineering commanders are qualified as "sapper 08" while combat engineering officers are qualified as "sapper 11". Both go through additional advance training to gain the skills needed for high level sapper profession.

The Israel Police also maintains a bomb disposal specialist unit. All police sappers must graduate from a 10-month training program at the bomb disposal training center in Beit Shemesh, which includes operational exercises, theoretical studies, and fieldwork. [12]

Japan

Emperor Taisho and Gen. Uehara in 1915 (Taisho 4). Gen-Oleu-Emperor-Taisho-Gen-Uehara-Yusaku-LCCN2014700979.jpg
Emperor Taishō and Gen. Uehara in 1915 (Taishō 4).

Imperial Japanese Army (IJA)

In Japan, Kōhei-ka (工兵科, 工 means "engineer" and 兵 means "soldiers"), or Engineer Branch in English, was a branch (兵科) of the Imperial Japanese Army. General Yūsaku Uehara, who introduced the French sapeur or ingénieur system to IJA and authored the Kōhei Sōten (工兵操典, "Engineers' Manual"), is known as the "father of Japanese Kōhei" ("日本工兵の父").

Engineer Branch officers were considered technology specialists along with Artillery Branch (砲兵科) officers in IJA, except Technical Branch (技術科) officers who have an academic degree in science or engineering and developed military technology.

Selected Engineer and Artillery officers were educated at the Army Artillery and Engineering School (陸軍砲工学校). Artillery and Engineering School's Kōtō-ka (高等科, "Higher Course") was equivalent to the Army War College. Some Kōtōka graduates, like Lt. Gen. Takeo Yasuda, continued their studies as Rikugun Ingai Gakusei (陸軍員外学生) at Imperial University of Tokyo's Engineering Faculty and Science Faculty and obtained degrees. Due to the apparent importance of science and technology, Artillery and Engineering School was renamed Army Science School during World War II and was also studied by non-artillery and non-engineer officers.

Ordinary personnel at Engineer Branch are educated at the Army Engineer School (陸軍工兵学校) and other schools.

Japan Ground Self-Defense Force (JGSDF)

JGSDF Shisetsu-ka (施設科, "施設" literally means "facilities"), or Engineer Branch in English, is equivalent to the IJA Kōhei-ka. In accordance with the JSDF's nomenclature, this title was devised to avoid the character for 'soldier', which evokes the military.

JGSDF Engineer Branch personnel are educated at JGSDF Engineer School (陸上自衛隊施設学校).

France

Insignia of French military sappers Genie-beret.jpg
Insignia of French military sappers

In France, sapper (sapeur) is the title of military combat engineers and firefighters, both civil and military, (sapper-fireman or sapeur-pompier). Military sappers fall under the umbrella of the Engineering Arm or Arme du Génie. A related title is pioneer (pionnier), used only in the Foreign Legion.

History

French Imperial Guard sappers, 1810 Sapeurs du genie de la Garde imperiale, 1810 crop.jpg
French Imperial Guard sappers, 1810

The French Corps of Engineers was created under the command of Marshal Vauban during the late 17th century. Its members were called sappers if their function was to destroy enemy fortifications by using trenches or sape and miners if they engaged in tunnel warfare or mine. The Corps of the Engineers was suppressed during two short periods (1720-1729 and 1769-1793) and sappers and miners were part of the Artillery regiments. In 1793, the Corps was reorganized into companies of miners and battalions of sappers, each assigned to a particular division.

Eventually, as the missions of the Corps grew more diversified, additional titles were used by combat engineers, such as Conductor (sapeur-conducteur) in 1810, entrusted with the logistics of the Corps, Firefighter (sapeur-pompier) in 1810 or telegraph sapper (sapeur-télégraphiste). In 1814, the companies of miners were integrated into the sapper battalions, themselves organized in Engineers Regiments (régiments du génie). In 1875, the distinction between miners and sappers was abolished and all members of the Corps of Engineers were titled sappers-miners, though only sapper was used in common usage. In 1894, the pontonniers or bridgemakers were transferred from the Artillery Corps to the Engineers, thus creating the title sapeurs-pontonniers. In 1909, the Engineering Arm of the Army Staff was entrusted the burgeoning Air Service (Aérostation militaire), its personal was titled sapper-airman (sapeur-aérostier). The titled was disused in 1914 when the Air Service took its independence from the Engineering Arm.

Firefighters

Sapeurs-pompiers de Paris (Paris Fire Brigade) on parade BSPP section Bastille Day 2008.jpg
Sapeurs-pompiers de Paris (Paris Fire Brigade) on parade

The first fire company created by Napoléon I was a military sapper company of the French Imperial Guard, created in 1810. This company was tasked with the protection of the Imperial palaces after the tragic fire of the Austrian embassy in Paris on 1 July 1810. The Paris Fire Service (gardes-pompes), a civilian institution, was re-organized as a military unit in September 1811, becoming the Paris Sappers-Firefighters Battalion. Other cities kept or created civilian firefighters services but used the military ranks and organization of the Paris Battalion. In 1831, National Guard engineers companies became the reserve components of the Fire Services and kept their military organization even after the disappearance of the National Guard in 1852. Sapper-firefighter is the common title of the civilian and Paris firefighters in France, but the other military firefighters units, such as the Marseille Naval Fire Battalion, do not use the sapper title, as they had no military engineers lineage.

Pioneers

Since the 18th century, every grenadier battalion in the French Army had a small unit of pioneers, sometimes called sappers-pioneers (sapeurs-pionniers). They had the mission to advance under enemy fire in order to destroy the obstacles drawn by the enemy and to clear the way for the rest of the infantry. The danger of such missions resulted in pioneers having short life expectancies. Because of this, the army allowed them certain privileges such as the authorization to wear beards. In addition to their beards and axes, they traditionally wear leather aprons and gloves.

The pioneers units disappeared during the mid-20th c. century, their last appearance being the short-lived Pioneers Regiments of 1939–1944, a military public works service using the older draftees in the army. Only the Foreign Legion kept using a pioneer unit, mainly for representation duty. The current pioneer unit of the Legion reintroduced the symbols of the Napoleonic pioneers: the beard, the axe, the leather apron, the crossed-axes insignia, and the leather gloves. If the parades of the Legion are opened by this unit, it is to commemorate the traditional role of the pioneers "opening the way" for the troops. The pioneer unit is made up for parades of selected men taken in both the Infantry and the Engineers regiments of the Legion.

Greece

In the Hellenic Army, there is the "mechanic" or "Corps of Engineers" (μηχανικό; michaniko).[ clarification needed ]

Italy

The Italian Army uses the term "Guastatori" for its combat engineers, "Pionieri" for its construction engineers, "Pontieri" for its bridging engineers, and "Ferrovieri" for its railroad engineers.

Portugal

In Portugal, the term "sapper" is used both in the military and in the civilian environment. In the Portuguese Army, a sapador de engenharia (engineering sapper) is a soldier of the engineer branch that has specialized combat engineer training. A sapador de infantaria (infantry sapper) is a soldier of the infantry branch that has a similar training and who usually serves in the combat support sapper platoon of an infantry battalion. A sapador NBQ (NBC sapper) is an engineer branch soldier specialized in nuclear, biological and chemical warfare.

The bombeiros-sapadores ("sapper-firefighters") are the civil municipal professional firefighters that exist in the main cities of the country. The largest unit of this type is the Regimento de Bombeiros Sapadores ("sapper-firefighters regiment") maintained by the Lisbon municipal council. The sapadores florestais (forest sappers) are the professionals maintained by the government, local authorities and large private forestry companies, who cleans and maintain forests and prevents and fights forest fires.

Pakistan Army

In the Pakistan Army, sapper officers perform combat and normal engineer duties. The Corps is led by the Engineer-in-Chief who is a Lt Gen. The current Engineer-in-Chief is Lt Gen Khalid Asghar. The Frontier Works Organization, Military Engineering Service and the Survey of Pakistan is part of the corps. Initially part of the Indian Corps of Engineers, it dates back to 1780 but came to its modern form in 1947 following the Independence of Pakistan. Since then it has taken part in all wars including 1965 War, 1971 War and Kargil War. It has completed the Pakistan portion of Karakoram Highway. The corps is taking part in Operation Zarb-e-Azb

United States Army

US combat engineer setting a charge in World War II COMBAT ENGINEER SETTING A CHARGE.jpg
US combat engineer setting a charge in World War II

In the United States Army, sappers are combat engineers who support the front-line infantry, and they have fought in every war in U.S. history. For example, after the Battle of Yorktown, General Washington cited Louis Lebègue Duportail, the chief of engineers, for conduct that afforded "brilliant proofs of his military genius."

Designation as a "sapper" is also earned as an additional proficiency. The U.S. Army authorizes four skill tabs [13] for permanent wear above the unit patch on the left shoulder (Army Regulation 670-1 Chapter 29–13, Sub-Paragraph f). Along with the Sapper Tab, the Special Forces Tab, Ranger Tab, and President's Hundred Tab identify soldiers who have passed a demanding course of military instruction and have demonstrated their competence in particular specialties and skills.

To wear the Sapper Tab, a soldier must graduate from the Sapper Leader Course, which is operated by the U.S. Army Engineer School at Fort Leonard Wood, Missouri. The Sapper Leader Course is a demanding 28-day leadership development course for combat engineers that reinforces critical skills and teaches advanced techniques needed across the army. It is also designed to build esprit de corps by training soldiers in troop-leading procedures, demolitions (conventional and expedient), and mountaineering operations. The course culminates in an intense field-training exercise that reinforces the use of the battle drills and specialized engineer techniques learned throughout the course. The course is open to enlisted soldiers in the grades of E-4 (P) (Army specialists and corporals on the list for promotion to sergeant) through E-7, cadets, and officers O-3 (Captain) and below. The course is primarily for U.S. Army and USMC combat engineers, but may be attended by all service members with an approved waiver. [14]

PAVN and Viet Cong

Sapper formation- PAVN/Viet Cong Sapperorg.jpg
Sapper formation- PAVN/Viet Cong

PAVN (People's Army of Vietnam) and Viet Cong sappers, as they were called by US forces, are better described as commando units. The Vietnamese term đặc công can be literally translated as "special task". Thousands of specially trained elite fighters served in the PAVN and Viet Cong commando–sapper units which were organized as independent formations. While not always successful due to lack of appropriate personal weapon types for combat and assault like other special forces, they were still capable of inflicting heavy damage with their non-firearms arsenal. During the Vietnam War, they were armed with various types of bombs, mines, explosive charges, grenades and even steel-pellet mines which proved especially devastating. These are still the main weapons of the đặc công.

These elite units served as raiders against American/ARVN troops, and infiltrated spearheads during the final Ho Chi Minh Campaign in 1975, where they seized key road and bridge assets, destroyed installations, attacked command and control nodes located deep inside enemy territory, planted explosives on U.S. water craft, and otherwise helped the PAVN's rapid mobile forces advance. A typical PAVN/VC đặc công organization is shown in the diagram. The raiding force was usually grouped into assault teams, each broken down into several 3–5-man assault cells. Overall, there were generally four operational echelons. [15]

An instance of a successful sapper attack conducted by the Viet Cong was the during the Battle of Fire Base Mary Ann. A small number of sappers, through surprise and deft coordination, conducted a successful attack on a superior US force. The battle was described as a "rampage of VC who threw satchels at the command bunker, knifed Americans in their sleep and destroyed all communications equipment. [16]

Ottoman Empire

The Ottoman Empire had an infantry corp named Lağımcılar Ocağı (literally: Sapper Corps). These infantries were used in most of the Empire's sieges, demolishing enemy fortifications and defences.

Honors

Sapper Island, St. Joseph Channel, Algoma District, Ontario was named in honour of sappers, especially those who graduated from the Royal Military College of Canada. [17] 46°18′56″N83°57′29″W / 46.31556°N 83.95806°W / 46.31556; -83.95806 .

In Warsaw (Poland) there is memorial honouring sappers (Pomnik Chwała Saperom)

In fiction

In the 1978 song by Australian rock band Cold Chisel, "Khe Sanh", the narrator (a fictional Australian army Vietnam War veteran) says "I left my heart to the sappers round Khe Sanh". However, the only sappers or combat engineers present at the historical Battle of Khe Sanh belonged to US, South Vietnamese and (opposing) North Vietnamese units.

In the 2008 science-fiction novel The Last Colony , a fictitious "sapper field" technology is used to disrupt enemy weapons operation.

Rudyard Kipling's poem "Sappers" (1896) [18] detailed some of the duties of Sappers in the British Army of Victorian times. The notes on this poem [19] further explain the duties referenced.

See also

Related Research Articles

<span class="mw-page-title-main">Military engineering</span> Building and maintaining structures and systems for armies

Military engineering is loosely defined as the art, science, and practice of designing and building military works and maintaining lines of military transport and military communications. Military engineers are also responsible for logistics behind military tactics. Modern military engineering differs from civil engineering. In the 20th and 21st centuries, military engineering also includes CBRN defense and other engineering disciplines such as mechanical and electrical engineering techniques.

<span class="mw-page-title-main">Combat engineer</span> Soldier who performs military engineering

A combat engineer is a type of soldier who performs military engineering tasks in support of land forces combat operations. Combat engineers perform a variety of military engineering, tunnel and mine warfare tasks, as well as construction and demolition duties in and out of combat zones.

<span class="mw-page-title-main">Corps of Royal New Zealand Engineers</span> Military unit

The Corps of Royal New Zealand Engineers is the administrative corps of the New Zealand Army responsible for military engineering. The role of the Engineers is to assist in maintaining friendly forces' mobility, deny freedom of movement to the enemy, and provide general engineering support. The corps has been involved in numerous conflicts over the course of its history including World War I, World War II, the Korean War, the Vietnam War and the war in Afghanistan. The corps consists of a single regiment, 2nd Engineer Regiment, primarily based at Linton Military Camp near Palmerston North.

<span class="mw-page-title-main">Rifleman</span> Infantry soldier armed with a rifle

A rifleman is an infantry soldier armed with a rifled long gun. Although the rifleman role had its origin with 16th century hand cannoneers and 17th century musketeers, the term originated in the 18th century with the introduction of the rifled musket. By the mid-19th century, entire regiments of riflemen were formed and became the mainstay of all standard infantry, and rifleman became a generic term for any common infantryman.

<span class="mw-page-title-main">Canadian Military Engineers</span> Unified military engineering branch of the Canadian Armed Forces

The Canadian Military Engineers is the military engineering personnel branch of the Canadian Armed Forces. The members of the branch that wear army uniform comprise the Corps of Royal Canadian Engineers.

<span class="mw-page-title-main">Indian Army Corps of Engineers</span> Engineering arm of the Indian Army

The Indian Army Corps of Engineers is a combat support arm which provides combat engineering support, develops infrastructure for armed forces and other defence organisations and maintains connectivity along the borders, besides helping the civil authorities during natural disasters. College of Military Engineering, Pune (CME) is the premier technical and tactical training institution of the Indian Army Corps of Engineers.

<span class="mw-page-title-main">Pioneer (military)</span> Soldier tasked with engineering and construction

A pioneer is a soldier employed to perform engineering and construction tasks. The term is in principle similar to sapper or combat engineer. Pioneers were originally part of the artillery branch of European armies. Subsequently, they formed part of the engineering branch, the logistic branch, part of the infantry, or even comprised a branch in their own right.

<span class="mw-page-title-main">2nd Engineer Regiment (Italy)</span> Active Italian Army combat engineer unit

The 2nd Engineer Regiment is a military engineering regiment of the Italian Army based in Trento in Trentino. The regiment was formed in 1860 and is currently the oldest active engineer regiment of the Italian Army. Since 1954, the unit has been assigned of the 4th Alpine Army Corps and has therefore a strong association with the Italian Army's mountain infantry speciality, the Alpini, with whom the regiment shares the distinctive Cappello Alpino. The regiment is the engineer unit of the Alpine Brigade "Julia" and specializes in mountain combat.

<span class="mw-page-title-main">2nd Division (South Vietnam)</span> Military unit

The 2nd Division was a division of the Army of the Republic of Vietnam (ARVN)—the army of the nation state of South Vietnam that existed from 1955 to 1975. It was part of I Corps that oversaw the northernmost region of South Vietnam.

<span class="mw-page-title-main">21st Division (South Vietnam)</span> Military unit

The 21st Division of the Army of the Republic of Vietnam (ARVN)—the army of the nation state of South Vietnam that existed from 1959 to 1975, was part of the IV Corps that oversaw the southernmost region of South Vietnam, the Mekong Delta. The 21st Division was based in Chương Thiện province, the southernmost province in the whole country, in an area dominated by jungles and swamps.

<span class="mw-page-title-main">8th Paratroopers Engineer Regiment "Folgore"</span> Active Italian Army airborne combat engineer unit

The 8th Paratroopers Engineer Regiment "Folgore" is an airborne military engineering regiment of the Italian Army based in Legnago in Veneto. The regiment is assigned to the Paratroopers Brigade "Folgore" and combines the lineage and traditions of the Royal Italian Army's 8th Engineer Regiment and VIII Paratroopers Sappers Battalion, and the Italian Co-Belligerent Army's CLXXXIV Mixed Engineer Battalion.

Phase III of the Tet offensive of 1968 was launched by the People's Army of Vietnam (PAVN) and Viet Cong (VC) from 17 August to 27 September 1968. The offensive was divided into two waves of attacks from 17 to 31 August 1968 and from 11 to 27 September of that same year.

Operation Nevada Eagle was a security operation during the Vietnam War in Thừa Thiên Province, that took place from 17 May 1968 to 28 February 1969.

<span class="mw-page-title-main">4th Engineer Regiment (Italy)</span> Active Italian Army combat engineer unit

The 4th Engineer Regiment is a military engineering regiment of the Italian Army based in Palermo in Sicily. The regiment is the engineer unit of the Mechanized Brigade "Aosta". In 1926, the Royal Italian Army formed the 4th Engineer Regiment in Verona. During the Second Italo-Ethiopian War and World War II the regiment's depot formed engineer battalions and smaller units, which deployed with divisions and corps to the fronts of the war. After the announcement of the Armistice of Cassibile on 8 September 1943 the regiment was disbanded by invading German forces.

<span class="mw-page-title-main">Assault Engineering Brigades</span>

Assault Engineering Brigades or Storm Engineer-Sapper Brigades were formations of the Reserve of the Supreme High Command of the Red Army, being notable for their service during the Second World War. These brigades were designed to storm settlements and to break through heavily fortified enemy lines. These units are commonly abbreviated as ShISBr, and are occasionally referred to as "armoured infantry" or "cuirass infantry".

<span class="mw-page-title-main">Albert Communal Cemetery Extension (War Graves)</span> War cemetery located in the French Commune of Albert in the Somme Region

The Albert Communal Cemetery Extension is a war cemetery with dead from both World War I and World War II located in the French Commune of Albert in the Somme Region.

<span class="mw-page-title-main">Tet offensive attacks on Da Nang</span> 1968 Battle during the Vietnam War

The attacks on Da Nang, were a series of attacks in the Tet Offensive launched by the North Vietnamese People’s Army of Vietnam (PAVN) and the Viet Cong (VC) during the Vietnam War. The attacks were repulsed by combined United States Marine Corps (USMC), United States Army, Army of the Republic of Vietnam (ARVN) and Republic of Korea Marine Corps (ROKMC) forces with the PAVN/VC suffering heavy losses.

Future Soldier is a reform of the British Army resulting from the Integrated Review of Security, Defence, Development and Foreign Policy published in March 2021. The aim of the reform is to create a more lethal, agile and expeditionary force, able to fight and win wars and to operate in the grey-zone between peace and war. Future Soldier was published on 25 November 2021 and deals with the organizational changes of the British Army, with changes to personnel and equipment were set out in the Defence in a Competitive Age paper published on 22 March 2021.

<span class="mw-page-title-main">51st Engineer Battalion "Simeto"</span> Italian Army engineer unit

The 51st Engineer Battalion "Simeto" is a military engineering unit of the Italian Army last based in Palermo in Sicily. During the later half of World War I the Royal Italian Army's 2nd Engineer Regiment (Sappers) formed an engineer battalion with the number LI, which served on the Italian Front. In 1935, in preparation for the Second Italo-Ethiopian War, the 4th Engineer Regiment formed an engineer battalion, which received the same number. After the annexation of Ethiopia the battalion remained active and served in the Western Desert campaign and Tunisian campaign of World War II. In 1943, the Italian Co-belligerent Army formed an engineer battalion with the number LI, which was initially assigned to the I Motorized Grouping, then the Italian Liberation Corps, and finally the Combat Group "Legnano". The battalion fought on the allied side in the war's Italian campaign.

<span class="mw-page-title-main">1st Engineer Regiment (Italy)</span> Inactive Italian Army engineer unit

The 1st Engineer Regiment is an inactive military engineering unit of the Italian Army, which was last based in Trento in Trentino. The regiment is the oldest engineer regiment of the Italian Army. In 1848, the Royal Sardinian Army formed the Sappers Regiment, which in 1860 was split into the 1st Sappers Regiment and 2nd Sappers Regiment. Between its formation and 1866, the regiment's companies fought in the First Italian War of Independence, Crimean War, Second Italian War of Independence, Sardinian campaign in central and southern Italy, and the Third Italian War of Independence. In 1867, the two sappers regiments were merged into the Sappers Corps, which, in 1874, was disbanded so the two regiments could be reformed. The 1st Engineer Regiment provided personnel for First Italo-Ethiopian War and two sappers battalions for the Italo-Turkish War. During World War I the regiment's battalions and companies fought in all sectors of the Italian Front, and on the Macedonian Front, Albanian Front, and Western Front. In 1920, the regiment was disbanded. In November 1926, the regiment was reformed and assigned to the I Army Corps. During the Second Italo-Ethiopian War and World War II the regiment's depot formed engineer battalions and smaller units, which deployed with divisions and corps to the fronts of the war. After the announcement of the Armistice of Cassibile on 8 September 1943 the regiment was disbanded by invading German forces.

References

Citations

  1. "Definition of SAPPER". www.merriam-webster.com. Retrieved 1 April 2022.
  2. "Sapper Leader Course :: FORT LEONARD WOOD". home.army.mil. Retrieved 1 April 2022.
  3. "What does sapeur mean in French?".
  4. James, Charles (1816). "Sape". An Universal Military Dictionary, in English and French: In which are Explained the Terms of the Principal Sciences that are Necessary for the Information of an Officer. T. Egerton. p.  781 . Retrieved 14 March 2018. Sappe not only signifies the opening which is made but also the act of sapping. Richelet, Boyer, and others write the word with one p, Trevoux, and Belidor with two; but the mere spelling of a word seems not to have been much attended to, even by the best French writers.
  5. Brachet, Auguste (1882). "Sape". An Etymological Dictionary of the French Language: Crowned by the French Academy. Clarendon Press. p. 352. Archived from the original on 26 July 2018. Retrieved 14 March 2018. Image of p. 352 at Google Books {{cite book}}: External link in |quote= (help)
  6. "Roman military entrenching tool". Museum of London Prints. Archived from the original on 15 March 2018. Retrieved 14 March 2018.
  7. Jobson 2009, p. 96.
  8. "Sapper PLATER, FREDERICK JOHN". Commonwealth War Graves Commission.
  9. Preston pp. 261–2
  10. Carver 2003 p. 242
  11. Falls 1930 Vol. 2 p. 568
  12. Efraim, Omri (20 September 2011). "Israel Police get 1st female sapper". Israel News. Archived from the original on 2 April 2015. Retrieved 12 March 2015.
  13. AR 670-1: Wear and Appearance of Army Uniforms and Insignia Archived 16 July 2011 at the Wayback Machine U.S. Army, revised: 11 May 2012.
  14. Sapper Course, US Army, archived from the original on 9 September 2006
  15. Ott 1975, pp.1–42.
  16. Nolan, Keith William (2007). Sappers in the Wire: The Life and Death of Firebase Mary Ann. Texas A & M University Press. ISBN   9781585446438.
  17. Ontario History, Papers and Records, Vol. X, Ontario Historical Society, 1913. Retrieved 28 October 2010.
  18. "Sappers". 31 March 2021.
  19. "Sappers". 31 March 2021.

Bibliography