Monocoach H | |
---|---|
Role | Twin-engine, 4 or 5 seat light aircraft |
National origin | U.S.A. |
Manufacturer | Lambert Aircraft Corporation |
Designer | Tom Towle |
First flight | 1936 |
Number built | 1 |
The Lambert Twin Monocoach was a light, twin-engined U.S. aircraft, designed to carry three or four passengers. Initially it was fitted with economical, low-powered engines but even given a large increase of power it failed to attract customers.
The Lambert Corporation got into financial difficulties and failed during 1936, [1] the year that the Monocoach first flew. As a result, the earliest pre-World War II accounts [2] [3] of it use the Lambert name and later ones, like Jane's All the World's Aircraft 1938 [4] refer to it as the Monocoupe Monocoach after the succeeding company. Although it was designated the Type H from the start, [2] [3] it has also been referred to as the Lambert or Monocoupe Twin Monocoach to distinguish it from the earlier Lambert Monocoach, a single-engine aircraft. [5]
The Monocoach H had a low, one-piece wooden wing, built around two box-spars with girder-type ribs and fabric covering. [4] In plan the very low aspect ratio (5.6) wing was rectangular out to semi-elliptical tips. [2] It had short Frise type ailerons outboard; between them, along the trailing edge and under the fuselage, were NACA-type split, balanced flaps. The ailerons and flaps were the only metal framed wing structures. [4]
The Monocoach's two 67 kW (90 hp) Lambert R-266 five-cylinder radial engines were mounted ahead of the wing leading edge under broad-chord cowlings with short nacelles which reached back to mid-wing. There were oil tanks in the nacelles and each engine had a fuel tank in the wing with a total fuel capacity was 265 L (58 imp gal; 70 US gal). [2]
Its fuselage had a welded steel tube structure, metal skinned ahead of the wing and fabric covered aft. The cabin had side-by-side seats, equipped with dual control, positioned just behind the leading edge and a bench seat for two or three behind the crew. Slender-framed windows reached almost to the trailing edge; the cabin was accessed through a wide, port-side door and there were baggage spaces in the nose and under the rear seat. [4]
The Monocoach's horizontal tail was similar in plan to that of the wing and its vertical tail was rounded, with a large fin. The rear control surfaces were all balanced and fitted with trim tabs. All rear surfaces had steel structures and were fabric covered. [2] [4]
Its retractable undercarriage was conventional and had a track of 3.0 m (9 ft 10 in). The mainwheels, which were fitted with hydraulic brakes and mounted on single shock absorber legs, were electrically retracted rearwards into the engine nacelles. The tailwheel was steerable and was enclosed in a streamlined fairing. [2] [4]
The exact date of the first flight is uncertain but it was probably in the summer of 1936; the October 1936 issue of Popular Aviation reported that it had just completed its initial flight but also that it had been on a long demonstration tour, covering 1,868 mi (3,006 km) in a week. [3]
The Lambert-powered aircraft was never certified. Despite the possibly optimistic manufacturer's performance figures, it was judged short of power and also had poor directional stability with one engine out. The radials were therefore replaced with a pair of 150 hp (110 kW) Menasco D-4 four-cylinder, inverted air-cooled in-line engines. Fin area was increased by the replacement of the central surface by two fins almost at the tips of the tailplane. [6]
At the end of the 1930s, Lambert gave the original and later variants the names Zenith and Zephyr respectively. [6]
Data from Jane's All the World's Aircraft 1938 [4]
General characteristics
Performance
The Monocoupe 90 was a two-seat, light cabin airplane built by Donald A. Luscombe for Monocoupe Aircraft. The first Monocoupe was built in an abandoned church in Davenport, Iowa, and first flew on April 1, 1927. Various models were in production until the late 1940s.
The Harbin Y-11 is a high wing twin-engine piston utility and geological survey aircraft built by Harbin Aircraft Manufacturing Corporation (HAMC).
The Cessna Airmaster, is a family of single-engined aircraft manufactured by the Cessna Aircraft Company. The Airmaster played an important role in the revitalization of Cessna in the 1930s after the crash of the aviation industry during the Great Depression.
The RWD-11 was a six-passenger feeder-liner designed and built in Poland from 1932.
The Potez 662 was a higher powered and faster development of the Potez 661. Like its predecessor, it was a low wing, four engine monoplane carrying 12 passengers. Only one was built, serving with the French Air Ministry.
The Praga E-210 was a four-seat, twin-engined touring aircraft built in Czechoslovakia in the late 1930s. It had an unusual pusher configuration. Its tail unit and undercarriage were modified significantly before World War II and after the war a more powerful version designated E-211 was flown.
The I.S.T. XL-15 Tagak was a single-engine, twin-boom, high-wing monoplane designed after the I.S.T. XL-14 Maya and built in the Philippines in the mid-1950s. The result of a collaboration between a Government research institute and the Philippine Air Force, it was designed as a utility, liaison or ambulance aircraft and as a test bed for the use of local materials in aviation.
The twin-engined CANT Z.1011 was one of two bombers of about the same size and powered by the same engines, designed by Filippo Zappata in the mid-1930s. The other was the three-engined CANT Z.1007, which in the end was the type preferred by the Regia Aeronautica.
The Timm T-840 was a twin engine, high wing passenger aircraft designed and flown in the United States in 1938. Equipped with a tricycle undercarriage and low speed aerodynamic devices, it could be configured to carry between six and ten passengers. Only one was built.
The Waterman Arrowbile was a tailless, two-seat, single-engine, pusher configuration roadable aircraft built in the US in the late 1930s. One of the first of its kind, it flew safely but generated little customer interest, and only five were produced.
The Tachihi R-53 was amongst the first aircraft built in Japan after the relaxation of the ban imposed at the end of World War II. It is a parasol-wing, two seat, training aircraft powered by a British engine. Only one was produced.
The SNCAC NC.510 was a twin-engine French reconnaissance, army co-operation or advanced training aircraft, built in the late 1930s. Three were built and refined but production orders were not forthcoming.
The Chasle YC-100 Hirondelle (Swallow) is a French single seat microlight designed in the 1980s.
The Caudron Type D was a French pre-World War I single seat, twin-boom tractor biplane, a close but slightly smaller relative of the two seat Caudron Type C. More than a dozen were completed, one exported to the United Kingdom, where they may also have been licence built, and three to China.
The SEA.1 was a Belgian, multi-purpose, light twin engine monoplane flown in 1936. Only one was built; it was later converted into a single engine aircraft and used by the military.
The Aeroneer 1-B is an all-metal light aircraft built in the United States in 1936. It did not reach production, despite an attempt to interest the USAAC in it as a trainer, but it appeared in three Hollywood films.
The WNF Wn 16 was an Austrian experimental aircraft built near the start of World War II to test the properties of the then-new tricycle undercarriage arrangement.
The ITS-8 was a Polish twin-boom motor glider flown in 1936. Two prototypes were completed but production was prevented by the German invasion of Poland in 1939.
The SCAL FB.30 was a French twin boom, pusher configuration, two seat civil sport and touring aircraft designed by Antoine Bassou in the mid-1930s. Three, with different engines, were built and flown.
The Jones S-125 was a U.S. two-seat sport aircraft intended for large-scale production, though only one was completed.