| Leyland Tiger Cub | |
|---|---|
 | |
| Overview | |
| Manufacturer | Leyland |
| Production | 1952-1970 |
| Body and chassis | |
| Doors | 1 |
| Floor type | Step entrance |
| Powertrain | |
| Engine |
|
| Capacity |
|
| Power output |
|
The Leyland Tiger Cub (coded as PSUC1) was a lightweight underfloor-engined chassis manufactured by Leyland between 1952 and 1970.
The Leyland Tiger Cub was launched in 1952. Most were built as 44-45 seat buses, with a smaller number as coaches. The standard bodied dimensions were 30 ft (9.1 m) long by 8 ft (2.4 m) wide, the UK maximum at launch in 1952.
It was named when a lighter-weight chassis was introduced in 1952 as a modification to the older Leyland Royal Tiger (type PSU1), which was regarded by certain influential customers, especially in the BET group of privately managed bus companies, as overweight, over-specified and too expensive, those who were operating it were also finding vacuum-servo versions under-braked. [1]
The Tiger Cub was powered initially by a Leyland O350H 91bhp 5.76-litre diesel engine, a horizontal version of the engine fitted to the Comet 90. It had a newly designed lightweight high straight frame with a vertical radiator set just behind the front axle. The launch transmission was the same four-speed constant mesh unit which had been used in the Tiger PS1, Titan PD1 and their export equivalents.
There was a choice of either a single-speed or two-speed rear axle, both of spiral-bevel form and derived from the Comet 90 design, the latter using an electrically actuated Eaton driving head in a Leyland casing. Wheels were of the eight-stud type and diaphragm-type air braking was standard. This was the first time Leyland had offered a bus chassis without another braking option, whilst vacuum or vacuum-hydraulic brakes were still standard across most of the UK bus and coach industry. [2]
The prototypes were bodied by Saunders-Roe of Anglesey as 44-seat buses working initially for Midland Red while the second was shown on the Leyland stand at the 1952 Commercial Motor Show in the livery of Ribble Motor Services. At the show it was announced that the BET group had placed an order for 500 of the new chassis to be bodied in 1953 and 1954. The bodied Tiger Cub weighed around two tons less than an equivalent Royal Tiger, with commensurate savings in fuel.
After the show the body was removed from the second demonstrator and fitted on a production chassis. It was to be the first of many Ribble Tiger Cubs, whilst Midland Red never purchased new examples of the type. The debodied chassis was updated to production specification and sent to Walter Alexander Coachbuilders, Stirling for bodying as a demonstrator until 1956 when it was sold to Stark's Motor Services, Dunbar. Many later Tiger Cubs were rebodied, generally after accident damage, but occasionally when a coach operator wanted a more up to date appearance. The last such rebodying was done for Western Welsh by Willowbrook in 1971.
The initial production model was type PSUC1/1T, with the two-speed axle as standard. Omission of this was a no-cost option, in which case the T-suffix was omitted.
In 1953 two variants emerged. For coaching duties type PSUC1/2T had a dropped-frame extension at the rear for a luggage boot and a higher-ratio rear axle for a higher road speed. Among the first customers were Scout of Preston, an independent coach operator who competed with Ribble on Lancashire to London express services. They had the first five Duple Elizabethan-bodied coaches in early 1954. [3]
In 1952 Leyland had bought into Self-Changing Gears. This company owned the patents for the preselective type of epicyclic gearbox which Leyland had fitted to the RTL and RTW Titans it sold to London Transport. It was working on a new type of direct-acting epicyclic gearbox at the time of the Leyland takeover. Leyland announced this product in 1953 as the Pneumocyclic; the first two demonstrators were a Titan and a Tiger Cub. The Tiger Cub was demonstrated to London Transport during 1953/54 alongside an AEC Monocoach and a Bristol LS6G. [4]
This version of chassis had a four speed transmission with direct-air pedestal shift and entered production as type PSUC1/3 from 1955. Also in that year two versions for 7 ft 6 in (2.29 m) wide coachwork were announced; these differed from the previous types in having narrower axles. These were type PSUC1/4 with Pneumocyclic gearbox and PSUC1/5 with constant mesh. [1]
Two revisions to specification which were not accompanied by a change in specification number were from 1957 when an Albion five-speed constant-mesh gearbox became an option for manual-transmission chassis and from 1958 when the 105bhp 6.15 litre O375H engine [5] became optional across the range.
Although conceived for the home market, export versions were soon introduced, these were the OPSUC1, with heavier duty tyres and suspension, and the LOPSUC1, which also had left hand drive, suffixes and options as for home market models.
In 1962 the power unit became the 125 bhp 6.75-litre O400H and the type codes were revised, to PSUC1/11, PSUC1/12T and PSUC1/13. These were respectively manual bus, manual coach and pneumocyclic bus versions. The narrow models were discontinued. At this time the manual transmission options changed to Leyland 4-speed synchromesh or Albion 5-speed constant mesh. Production continued until 1969. [1]
The last Tiger Cub was bodied by Fowler of Leyland as a 44-seat bus and entered service with their parent company John Fishwick & Sons in January 1970. It has been preserved. [6]
The BET group were the largest purchasers in England and Wales. Of their subsidiaries, Western Welsh with a fleet of 271 had the most. In Scotland the largest customer was Walter Alexander & Sons who took 200 between 1955 and 1964. The largest municipal fleet was that of Edinburgh Corporation, who took 100 from 1959 to 1961, these were also the largest fleet of pneumocyclic Tiger Cubs. The Ulster Transport Authority in Northern Ireland and JMT on Jersey were the major customers for the narrow manual version, which Jersey initially took with shorter than standard rear overhang, reducing length to around 27 ft (8.2 m). [7] West Bromwich Corporation took seven of the narrow pneumocyclic version, the only ones built. Independents took Tiger Cubs as buses, coaches and dual-purpose vehicles, but as with the municipal Market, the Tiger Cub was not as strong a seller as the AEC Reliance.
Major export markets for the Tiger Cub were Ceylon (Sri Lanka), Denmark, Ghana, the Netherlands, India, Jamaica, New Zealand and Portugal. [8] [9] [10] [11] Leyland often sold export batches with Metro Cammell Weymann bodywork, but bodies were also produced by other UK firms and by local coachbuilders.
In Australia, the Metropolitan Transport Trust in Perth purchased 120 between 1965 and 1967. [12] Some were also purchased by Fearne's Coaches and Melbourne-Brighton Bus Lines. [13] [14]
Some second-hand Tiger Cubs were imported into Australia from Sweden and the United Kingdom in the 1970s and operated by Fearne's Coaches, Ingleburn Bus Service and Oliveri's Bus Service. [15] [16]
The Tiger Cub was very much the product of its straitened times, and throughout its production life faced stiff competition from the AEC Reliance. This had a larger capacity engine (and a vacuum brake option until 1966). The AEC version of the semi-automatic gearbox (Monocontrol) came as standard with a faster-engaging electro-pneumatic control. From 1961 when longer single decks were allowed domestic sales of the Tiger Cub began to tail off, and by 1969 the model could be considered replaced in the British Leyland catalogue by the similarly powered Bristol LH. BET depreciated buses and coaches on the basis of a 12-year life, so most of its examples were sold quite early, Scottish Bus Group, like many municipals, wrote its vehicles down over 15 years, with the result that most had disappeared from service in the middle 1970s. A number, both buses and coaches, survive into preservation. Overall, global sales were not as great as for the heavier Royal Tiger Worldmaster or later Leopard models but it kept Leyland in contention for home market single deckers during the 1950s.
Seddon Atkinson Vehicles Limited, a manufacturer of large goods vehicles based in Oldham, Greater Manchester, England, was formed after the acquisition in 1970 of Atkinson Vehicles Limited of Preston by Seddon Diesel Vehicles Limited of Oldham. In 1974, the firm was acquired by International Harvester, which sold it in March 1984 to the Spanish group Enasa which made it a subsidiary of Pegaso. In 1990, it became part of Iveco which used the brand for various types of specialised vehicles in the United Kingdom. The range of models produced included EuroMover, Pacer and Strato, which are aimed at refuse collection, recycling and construction operators.
Albion Motors was a Scottish automobile and commercial vehicle manufacturer.
The Leyland Titan was a forward-control chassis with a front-mounted engine designed to carry double-decker bus bodywork. It was built mainly for the United Kingdom market between 1927 and 1942, and between 1945 and 1969.
Duple Coachbuilders was a coach and bus bodybuilder in England from 1919 until 1989.
The Leyland Olympian was a 2-axle and 3-axle double-decker bus chassis manufactured by Leyland between 1980 and 1993. It was the last Leyland bus model in production.
The Leyland Leopard was a mid-engined single-decker bus and single-decker coach chassis manufactured by Leyland between 1959 and 1982.
The AEC Reliance was a mid-underfloor mounted engined single-decker bus and coach chassis manufactured by AEC between 1953 and 1979. The name had previously been used between 1928 and 1931 for another single-decker bus chassis.
Thomas Harrington & Sons was a coachbuilder in the county of Sussex from 1897 until 1966, initially at Brighton but from 1930 until the end in a purpose built Art Deco factory in Old Shoreham Road, Hove.
The Daimler Roadliner was a single-decker bus and coach chassis built by Daimler between 1962 and 1972. Notoriously unreliable, it topped the 1993 poll by readers of Classic Bus as the worst bus type ever, beating the Guy Wulfrunian into second place. It was very technologically advanced, offering step-free access some 20 years before other buses; as a coach, it was felt by industry commentators to be in advance of contemporary UK designs.
The Leyland Panther Cub was a rear-engined single-decker bus manufactured by Leyland from 1964 until 1968.
The Albion Aberdonian was an underfloor-engined bus designed and manufactured by Albion Motors between 1957 and 1960, it was introduced as a longer derivative of the Albion Nimbus.
The Albion Nimbus was an underfloor-engined, ultra-lightweight midibus or coach chassis, with a four-cylinder horizontal diesel engine and a gross vehicle weight of six tons. It was largely operated on light rural bus duties and private hires. Operators who used it on heavy-duty bus routes found it insufficiently robust. It was the first Albion bus chassis to have a name that did not begin with the letter V. The design was revised twice and was produced from 1955 to 1965.
The Daimler Freeline was an underfloor-engined bus chassis built by Daimler between 1951 and 1964. It was a very poor seller in the UK market for an underfloor-engined bus and coach chassis, but became a substantial export success.
The Leyland Lion, coded as PSR1, was a bus chassis manufactured by Leyland as its first production rear engined single decker. It was announced in 1960, although the first two were built in 1959. 56 LPSR1 and 28 PSR1 were sold to 1967 which was low for Leyland at the time. It was the third of five Leyland bus models to carry the Lion brand.
The Leyland Tiger was a heavyweight half-cab single-decker bus and coach chassis built by Leyland Motors between 1927 and 1968, except the period of World War II.
H. V. Burlingham was a British coachbuilding business based in Blackpool, Lancashire from 1928 until 1960 when they were taken over by London-based rivals Duple Motor Bodies. Duple initially renamed Burlingham as Duple (Northern) but in 1969 they closed their Hendon factory and concentrated production in Blackpool. Duple coach bodies were built in the former Burlingham premises until Duple itself was liquidated in 1989.
The Seddon Pennine 7 was a mid-underfloor-engined single-deck bus or coach chassis built by Seddon Atkinson between 1974 and 1982.
The Leyland Royal Tiger Worldmaster, sometimes simply known as the Leyland Worldmaster, was a mid-underfloor-engined single-decker bus or single-decker coach chassis manufactured by Leyland between 1954 and 1979.
The Albion Lowlander was a Scottish-built low-height double-decker bus.
The Leyland Royal Tiger PSU was an underfloor-engined bus and coach chassis manufactured by Leyland between 1950 and 1954.
Media related to Leyland Tiger Cub at Wikimedia Commons