M68 tank gun

Last updated
M68
NATO exercises in Nurenberg, Germany January 1986 (1) - photo by Nancy Wong.jpg
Front view of a M68E1 gun on an American M60A3 main battle tank during a military exercise in Nuremberg, 1986.
Type Tank gun
Place of originUnited States
United Kingdom
Service history
In service1960–present
Production history
Designer Watervliet Arsenal
ManufacturerWatervliet Arsenal
Produced1959–present
VariantsM68E1, M68A1, M68A1E4
Specifications
Mass754 kg (1,662 lb) (gun tube)
1,128 kg (2,487 lb) (recoiling gun mass)
Length5,550 mm (218.50 in) (overall)
Barrel  length5,347 mm (210.51 in) (gun tube)
Shell 105×617mm. R
Calibre 105 mm (4.134 in)
Breech semi-automatic vertical sliding-breechblock
Recoil 305 mm

The M68 is an American 105 mm tank gun. It uses British-designed L7 gun tube and cartridges with an American-designed mount, breech assembly and recoil mechanism.

Contents

Technical characteristics

The M68 differs from the L7 in several aspects :

History

The main gun for the M60 tank series was chosen after a comparative firing test of six different guns carried out on the Aberdeen Proving Ground in 1958. The factors evaluated were accuracy, the lethality of a hit, rate of fire, and penetration performance. [3] Based on these tests, the 105 mm T254E1 was selected, modified to the T254E2 and standardized as the Cannon, 105-MM Gun, M68. The T254E2/M68 used a vertical sliding breechblock instead of the T254E1's horizontal breechblock. Until American-made barrels could be obtained with comparable accuracy, British X15/L52 barrels mounting a concentric bore evacuator on the barrel were to be used. [4] US-built XM24/L52 barrels (length 218.5 inches) [5] fitted with an eccentric bore evacuator were used for the M60-series starting in June 1959 but retained interchangeability with the British X15/L52 barrel. [6] All of the US guns and XM24 barrels were produced at the Watervliet Arsenal in New York and the gun mounts (M116 for the M60 and M140 for the M60A1/A3) manufactured at the Rock Island Arsenal in Illinois. [7] US M68 guns were fitted with an eccentric bore evacuator instead of a concentric model in order to provide more clearance over the rear deck of the tank. [8] The original variant of the M60 tank was equipped with the M68 gun using the M116 mount. [9] Additionally, many M48A3s armed with a 90mm gun that were in NG-CONUS service with the Army National Guard were retrofitted with the M68 gun and re-designated as the M48A5. [10] This was done to maintain training levels of Guard units as well as using a commonality in ammunition amongst tanks.

The M60A1 and A3 variants of the M60 series [11] and earliest pre-production XM1 prototypes of the M1 Abrams tanks [12] are armed with the M68E1 variant of the gun. The M68E1 gun shares the same firing characteristics as the M68. It featured several design improvements including an updated gun hydraulic configuration, a stabilization upgrade for the gun, a gun elevation kill switch for the loader, improved ballistic drive and other component refinements. [11] They were fitted with thermal sleeves on the barrels starting in 1973. [13] During the mid 1970s it was becoming clear that the latest generation of composite based armor was impervious to tungsten carbide penetrators. [14] [15] Work was performed at the Department of Energy's Pacific Northwest National Laboratory to engineer development of depleted uranium as a penetrator material for future ammunition while the Armament Research and Development Command (ARRADCOM) was improving the performance of the 105mm M774 cartridge. [15] [14] The improved M833 round starting in 1983, also using a depleted uranium penetrator to keep the M68E1 gun viable against this improved armor. In 1975 an updated version of the gun, the T254E3 was designed, focusing on the use of chrome plating to improve accuracy. It was used to evaluate improvements to the gun's performance using discarding sabot ammunition. Two guns were built and underwent firing trials at Aberdeen [16] and technical evaluations at the Watervliet Arsenal. [17] Based on the results of these tests the shortcomings of plated bores and gun tubes were found to outweigh any advantage they might offer and the program dropped by May 1976. [18]

In January 1978, a program was initiated [19] to develop an enhanced version of the 105mm gun, the M68A1 as a possible alternate weapon for the M1 Abrams. [20] had a higher chamber pressure, [21] reinforced breech [20] allowing the use of high-energy propellants. [19] [22] Although the M256 120mm smoothbore gun was chosen to be the main weapon of the M1 Abrams in 1979, the ammunition for the gun was still not fully developed, thus delaying its fielding until 1984. [14] The early production versions of the M1 Abrams (M1 & IPM1) were armed with the M68A1 [23] for two reasons. First was due to the large number of M60 Patton tanks with the M68E1 gun still in widespread US service in the 1980s and a large on-hand stockpile of 105mm munitions. Fitting the M1 with the M68A1 gun was viewed as an economical and practical solution that allowed for commonality in ammunition among the two types of tanks. [24] Secondly was the fact that the M68A1E2 could employ the newly developed M900A1 APFSDS [25] depleted uranium round that had improved penetration performance in comparison to the M833. [26] These early versions of the M1 Abrams were in active Army service until 1991 and with National Guard units until 1996. [27] M1s built after 1984 were armed with the 120mm M256 and designated the M1A1. Many earlier M1 and IPM1 tanks were refitted with the M256 and their designations changed to the M1A1.

The M1128 Stryker Mobile Gun System (MGS) carries the M68A1E4 105mm cannon. The principal function of the MGS is to provide rapid direct fire to support assaulting infantry. [28] The cannon is mounted in a low-profile, fully stabilized turret integrated into the Stryker chassis. [29] The M68A1E4 is based on the M68A1E2 105mm cannon's design. It has a sustained fire rate of six rounds per minute. The gun employs four types of cartridges. The M900A1 kinetic energy penetrator to destroy armored vehicles; the M456A2 high explosive anti-tank round to destroy thin-skinned vehicles and provide anti-personnel fragmentation; the M393A3 high explosive plastic round to destroy bunkers, machine gun and sniper positions, and breach openings in walls for infantry to access; and M1040 canister shot for use against dismounted infantry in the open. [30] The M68A1E4 will be completely withdrawn from US service when the M1128 Mobile Gun System is retired by the end of 2022. [31]

Models

Foreign variants

Prototypes

Usage

See also

Related Research Articles

<span class="mw-page-title-main">M1 Abrams</span> American main battle tank

The M1 Abrams is a third-generation American main battle tank designed by Chrysler Defense and named for General Creighton Abrams. Conceived for modern armored ground warfare, it is one of the heaviest tanks in service at nearly 73.6 short tons. It introduced several modern technologies to United States armored forces, including a multifuel turbine engine, sophisticated Chobham composite armor, a computer fire control system, separate ammunition storage in a blowout compartment, and NBC protection for crew safety. Initial models of the M1 were armed with a 105 mm M68 gun, while later variants feature a license-produced Rheinmetall 120 mm L/44 designated M256.

<span class="mw-page-title-main">M551 Sheridan</span> American light tank

The M551 "Sheridan" AR/AAV was a light tank developed by the United States and named after General Philip Sheridan, of American Civil War fame. It was designed to be landed by parachute and to swim across rivers. It was armed with the technically advanced but troublesome M81/M81 Modified/M81E1 152 mm gun/launcher, which fired both conventional ammunition and the MGM-51 Shillelagh guided anti-tank missile.

<span class="mw-page-title-main">M48 Patton</span> Cold War-era American main battle tank

The M48 Patton is an American first-generation main battle tank (MBT) introduced in February 1952, being designated as the 90mm Gun Tank: M48. It was designed as a replacement for the M26 Pershing, M4 Sherman, M46 and M47 Patton tanks, and was the main battle tank of the U.S. Army and U.S. Marine Corps in the Vietnam War. Nearly 12,000 M48s were built, mainly by Chrysler and American Locomotive Company, from 1952 to 1961. The M48 Patton was the first U.S. medium gun tank with a four-man crew, featuring a centerline driver's compartment and no bow machine gunner. As with nearly all new armored vehicles it had a wide variety of suspension systems, cupola styles, power packs, fenders and other details among individual tanks.

<span class="mw-page-title-main">M60 tank</span> American second generation main battle tank

The M60 is an American second-generation main battle tank (MBT). It was officially standardized as the Tank, Combat, Full Tracked: 105-mm Gun, M60 in March 1959. Although developed from the M48 Patton, the M60 tank series was never officially christened as a Patton tank. It has been called a "product-improved descendant" of the Patton tank's design. The design similarities are evident comparing the original version of the M60 and the M48A2. The United States fully committed to the MBT doctrine in 1963, when the Marine Corps retired the last (M103) heavy tank battalion. The M60 tank series became America's primary main battle tank during the Cold War, reaching a production total of 15,000 M60s. Hull production ended in 1983, but 5,400 older models were converted to the M60A3 variant ending in 1990.

<span class="mw-page-title-main">Magach</span> Series of Israeli Tanks

Magach is the designation of a series of tanks in Israeli service. The tanks are based on the American M48 and M60 tanks. The name continued to be used for all M48/M60 tanks. Magach 1, 2, 3, and 5 are based on M48 series tanks, and Magach 6 and 7 are based on M60 series tanks.

<span class="mw-page-title-main">Royal Ordnance L7</span> Rifled tank gun

The Royal Ordnance L7, officially designated Gun, 105 mm, Tank, L7, is the basic model of the United Kingdom's most successful tank gun. It is a 105 mm L/52 rifled design by the Royal Ordnance Factories, intended for use in armoured fighting vehicles, replacing the older QF 20-pounder (84 mm) gun mounted on the British Centurion tank. The successful L7 gun has been fitted on many armoured vehicles, including the Centurion, the German Leopard 1 and, in an altered design, as the M68 gun in several variants of the US M48 Patton and M60.

<span class="mw-page-title-main">Type 74</span> Main battle tank

The Type 74 was a main battle tank (MBT) of the Japan Ground Self-Defense Force (JGSDF). It was built by Mitsubishi Heavy Industries as a supplement to the earlier Type 61. It was based on the best features of a number of contemporary designs, placing it in the same class as the US M60 Patton or German Leopard 1. Like these designs, it mounted the M68 rifled 105 mm gun. The design did not enter widespread use until 1980, by which point other Western forces had introduced more capable designs.

<span class="mw-page-title-main">T95 medium tank</span> American prototype medium tank developed from 1955 to 1959

The T95 was an American prototype medium tank developed from 1955 to 1959. These tanks used many advanced or unusual features, such as siliceous-cored armor, new transmissions, and OPTAR fire-control systems. The OPTAR incorporated an electro-optical rangefinder and was mounted on the right side of the turret, and was used in conjunction with the APFSDS-firing 90 mm T208 smoothbore gun, which had a rigid mount without a recoil system. In addition, although the tanks were designed with a torsion beam suspension, a hydropneumatic suspension was fitted, and one of the tanks was fitted with a Solar Saturn gas turbine for demonstration purposes.

<span class="mw-page-title-main">Rheinmetall Rh-120</span> Smoothbore tank gun

The Rheinmetall Rh-120 is a 120 mm smoothbore tank gun designed and produced in former West Germany by the Rheinmetall Waffe Munition GmbH company, it was developed in response to Soviet advances in armour technology and development of new armoured threats. Production began in 1974, with the first version of the gun, known as the L/44 as it was 44 calibres long, used on the German Leopard 2 tank and soon produced under license for the American M1A1 Abrams and other tanks. The 120-millimetre (4.7 in) gun has a length of 5.28 metres (17.3 ft), and the gun system weighs approximately 3,317 kilograms (7,313 lb).

<span class="mw-page-title-main">M101 howitzer</span> US-made towed howitzer

The M101A1 howitzer is an artillery piece developed and used by the United States. It was the standard U.S. light field howitzer in World War II and saw action in both the European and Pacific theaters and during the Korean War. Entering production in 1941, it quickly gained a reputation for accuracy and a powerful punch. The M101A1 fires 105 mm high explosive (HE) semi-fixed ammunition and has a range of 12,330 yards (11,270 m), making it suitable for supporting infantry.

Tank development both evolved considerably from World War II and played a key role during the Cold War (1945–1990). The period pitted the nations of the Eastern Bloc and the North Atlantic Treaty Organization (NATO) against each other.

<span class="mw-page-title-main">3-inch gun M1918</span> Anti-aircraft gun

The 3-inch gun M1918 was a United States 3-inch anti-aircraft gun that entered service in 1918 and served until it was largely superseded by the 3-inch anti-aircraft gun M3 in 1930, though the M1918 remained with some National Guard units until early in World War II. The M3 was subsequently replaced by the M1 90mm AA gun early in World War II, primarily during 1942. The M3 3" gun was later adapted for the anti-tank role, serving as the main armament of the M10 tank destroyer during World War II.

The General Dynamics Land Systems (GDLS) M60-2000 or 120S was an upgrade of the M60 tank. The development of the M60-2000 was initiated primarily due to the large number of M60 main battle tanks in service with many Middle Eastern nations unable to afford a sufficient force of more modern main battle tanks. The upgrade was marketed at those M60 users with the industrial capability to convert the tanks themselves. The M60-2000/120S was a GDLS supplied conversion kit that married the turret of the M1A1 variant of the M1 Abrams to the M60A1 hull of the M60, offering many features of the M1A1 Abrams to existing M60 users at a reduced cost.

<span class="mw-page-title-main">M116 howitzer</span> American pack howitzer

The 75mm pack howitzer M1 was a pack howitzer artillery piece used by the United States. Designed to be moved across difficult terrain, gun and carriage could be broken down into several pieces to be carried by pack animals.

The M1 Abrams main battle tank has been in service since 1980. Since then, it has gone through dozens of upgrades and been the baseline variant of several vehicles.

<span class="mw-page-title-main">Tanks of the United States</span>

The United States has produced tanks since their inception in World War I, up until the present day. While there were several American experiments in tank design, the first American tanks to see service were copies of French light tanks and a joint heavy tank design with the United Kingdom.

<span class="mw-page-title-main">Tanks of the United States in the Cold War</span>

This article deals with the history and development of American tanks from the end of World War II and during the Cold War.

<span class="mw-page-title-main">CM-11 Brave Tiger</span> Main battle tank

The CM-11 Brave Tiger is a main battle tank (MBT) that was developed by the American General Dynamics and the Republic of China Army Armored Vehicle Development Center. It was introduced to the public on 14 April 1990. The CM-11 is a hybrid M60 chassis fitted with the turret from the older M48 Patton and the fire control system of the M1 Abrams.

<span class="mw-page-title-main">CM-12 tank</span> Main battle tank

The CM-12 tank is a modified M48A3 made for the Republic of China Army situated on Taiwan. The Armored Vehicle Development Center (AVDC) used the extra 100 fire-control system units from the production of the CM-11 Brave Tiger to modify the existing M48A3 tanks of the ROC Army. The modification was completed as of 1993. The CM-12 can be distinguished from the CM-11 by the rounded glacis plates, and from the M48A3 by the 105mm M68A1 cannon, which is longer than the 90mm T139/M3A1 cannon on the M48A3 and lacks a muzzle brake, and by the different commander's cupola.

<span class="mw-page-title-main">M256 (tank gun)</span> Tank gun

The M256 is an American 120 mm smoothbore tank gun. It is a licensed-built German-designed Rheinmetall Rh-120 L44 gun tube and combustible cartridges with an American-designed mount, cradle and recoil mechanism. It is primarily used by the M1 Abrams main battle tank.

References

  1. ↑ Conners, Chris. "105mm Gun Tank M60". afvdb.50megs.com. Retrieved 19 August 2022.
  2. ↑ Foss, Christopher (1993). Jane's Armoured Fighting Vehicle Retrofit Systems 1993-94. London: Jane's Information Group. p. 41. ISBN   978-0710610799.
  3. ↑ Hunnicutt 1984, pp. 151–152.
  4. ↑ Hunnicutt 1984, p. 155.
  5. ↑ "09 M68 105mm Gun". www.williammaloney.com. Archived from the original on 2018-01-21. Retrieved 2019-05-31.
  6. ↑ Hunnicutt 1984, p. 152.
  7. ↑ "Procurement report" (PDF). www.gao.gov. 1976. Retrieved 2020-04-11.
  8. ↑ TM 9-2350-253-20-2 Organizational Maintenance Manual--Tank, Combat, Full Tracked: 105-mm Gun, M60A3 (2350-00-148-6548) and (2350-01-061-2306) TTS Turret. Washington, D.C.: Dept. of the Army, 15 April 1980
  9. ↑ Direct Support, General Support, and Depot Maintenance Manual for Cannon, 105-MM Gun, M68 & M68E1, M116 and 140 mount TM 9-1000-213-35 by Fred C. (Chief of Staff) Weyand | Jan 1, 1978
  10. ↑ Hunnicutt, R.P. (1990). Abrams: A History of the American Main Battle Tank. Presidio. pp. 209–210. ISBN   9780891413882.
  11. 1 2 Direct Support, General Support, and Depot Maintenance Manual for Cannon, 105-MM Gun, M68 & M68E1, M116 and 140..TM 9-1000-213-35 by Fred C. (Chief of Staff) Weyand | Jan 1, 1978
  12. ↑ M1 Abrams in Action By Jim Mesko – 1996 Squadron/Signal publications p.27
  13. ↑ "DTIC ADA090007: Comparison of Mechanical Properties of 105mm M68 Gun Tube Forgings". May 1, 1980 – via Internet Archive.
  14. 1 2 3 "Picatinny Arsenal - The Joint Center of Excellence for Guns and Ammunition". Pica.army.mil. Retrieved 2020-04-11.
  15. 1 2 "M774 105mm, APFSDS-T". www.globalsecurity.org.
  16. ↑ ^Aberdeen Proving Ground Report No. FR-P-82476, 22 April 1975
  17. ↑ Watervliet Arsenal Report No. WVT-TR-75047, Analysis of Wear Data from 105mm M68 Gun Tubes in Field Service, July 1975
  18. ↑ USA TECOM Report No. APG-MT-4802, Product Improvement Test of Gun, 105mm M68 TWear Resistant Plating Accuracy Phase, APG, May 1976
  19. 1 2 "DTIC ADA051050: Initial Firing Test Results of the 35mm Scaled Model of the 105mm M68 Tank Gun". January 1, 1978 – via Internet Archive.
  20. 1 2 CANNON, 105MM GUN: M68A1E2 MIL-C-45504A Rev. D Jan 1987 | Military and Government Specs & Standards (Naval Publications and Form Center) (NPFC)
  21. ↑ Hunnicutt, R.P. (1990). Abrams: A History of the American Main Battle Tank. Presidio. p. 312. ISBN   9780891413882. 105mm Gun Tank M1 and IPM1 in a combination mount (M68A1 Gun)
  22. ↑ Direct Support, General Support, and Depot Maintenance Manual for Cannon, 105-MM Gun, M68 & M68E1, M116 and 140 Mount TM 9-1000-213-35 by Fred C. (Chief of Staff) Weyand | Jan 1, 1978
  23. ↑ Hunnicutt, R.P. (1990). Abrams: A History of the American Main Battle Tank. Presidio. p. 312. ISBN   9780891413882. 105mm Gun Tank M1 and IPM1 in a combination mount with M68A1 Gun
  24. ↑ Osprey Publishing, New Vanguard #2: M1 Abrams Main Battle Tank 1982-1992, Steve Zaloga & Peter Sarson
  25. ↑ "M900 105mm APFSDS-T". www.globalsecurity.org.
  26. ↑ "Picatinny Arsenal - The Joint Center of Excellence for Guns and Ammunition". Pica.army.mil. Retrieved 2020-04-11.
  27. ↑ M1 Abrams in Action By Jim Mesko – 1996 Squadron/Signal publications p. 72
  28. ↑ "The Stryker Mobile Gun System: A Case Study on Managing Complexity" (PDF). apps.dtic.mil. Archived (PDF) from the original on December 14, 2019. Retrieved 26 January 2023.
  29. ↑ "M1128 Stryker Mobile Gun System". www.globalsecurity.org.
  30. ↑ Hill, Paul (August 26, 2014). "NDIA Joint Armaments Conference" (PDF). Archived from the original (PDF) on 2014-08-26.
  31. ↑ Losey, Stephen (12 May 2021). "The Army is ditching all of its Stryker Mobile Gun Systems". Military.com . Retrieved 26 January 2023.
  32. ↑ Direct Support, General Support, and Depot Maintenance Manual for Cannon, 105-MM Gun, M68 & M68E1, M116 and 140.TM 9-1000-213-35 by Fred C. (Chief of Staff) Weyand Jan 1, 1978
  33. ↑ Hunnicutt, R.P. (2015). Patton: A History of the American Main Battle Tank. Echo Point Books & Media. p. 443. ISBN   978-1626548794.
  34. ↑ Cannon, 105mm Gun: M68A1E2 MIL-C-45504A Rev. D Jan 1987 Military and Government Specs & Standards (Naval Publications and Form Center) (NPFC)
  35. ↑ Hunnicutt, R.P. (1990). Abrams: A History of the American Main Battle Tank. Presidio. p. 312. ISBN   9780891413882.
  36. ↑ M1 Abrams in Action By Jim Mesko – 1996 Squadron/Signal publications
  37. ↑ "Army Programs - Stryker - Mobile Gun System (MGS)" (PDF). DOT&E. p. 83.
  38. ↑ Hunnicutt, R. P. (1984). Patton: A History of the American Main Battle Tank. Presidio Press. p. 119. ISBN   0-89141-230-1.
  39. ↑ "Data" (PDF). apps.dtic.mil. Archived (PDF) from the original on December 1, 2020. Retrieved 2020-04-11.
  40. ↑ "M60A3 Patton Tank Thermal Sight (TTS)". www.globalsecurity.org.
  41. ↑ "M60A3 Patton Tank Thermal Sight (TTS)". globalsecurity.org. Retrieved 19 August 2022.
  42. ↑ Hunnicutt, R.P. (1990). Abrams: A History of the American Main Battle Tank. Presidio. p. 202. ISBN   9780891413882.
  43. ↑ "M60 Patton Series - Globalsecurity.org". Archived from the original on 2008-12-02. Retrieved 2008-12-02.
  44. ↑ "M8 Armored Gun System - Archived 3/2004". www.forecastinternational.com. Forecast International. Archived from the original on March 28, 2019. Retrieved 28 March 2019.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.