M.9 | |
---|---|
A M.9 of the Argentine Naval Aviation, circa 1920s | |
Role | Flying boat bomber |
National origin | Italy |
Manufacturer | Macchi |
Designer | Alessandro Tonini |
First flight | 1918 |
Number built | ca. 30 |
The Macchi M.9 was a flying boat bomber designed by Alessandro Tonini and produced by Macchi in Italy close to the end of World War I and shortly afterwards. [1]
The M.9 was a conventional design for its day, with unstaggered biplane wings of unequal span and a single engine mounted pusher-fashion on struts in the interplane gap, close to the underside of the top wing. The pilot and observer sat side by side in an open cockpit. While earlier Macchi flying boats had conventional interplane struts, the M.9 introduced the Warren truss-style struts that would become characteristic of this manufacturer's designs.
Around 16 examples were delivered to the Italian Navy prior to the Armistice, and around another 14 were assembled after the end of hostilities. [1] A small number of postwar aircraft were built with four seats under the designation M.9bis and were used in Switzerland for carrying passengers and mail. [1] [2]
Data fromJane's All the World's Aircraft 1919, p. 390.
General characteristics
Performance
Related lists
The CAMS 33 was a reconnaissance flying boat built in France in the early 1920s. It was designed in response to a French Navy requirement for new flying boats for various roles.
The Curtiss HS was a single-engined patrol flying boat built for the United States Navy during World War I. Large numbers were built from 1917 to 1919, with the type being used to carry out anti-submarine patrols from bases in France from June 1918. It remained in use with the US Navy until 1928, and was also widely used as a civil passenger and utility aircraft.
The Donnet-Denhaut flying boat was a maritime patrol and anti-submarine warfare aircraft produced in France during the First World War. Known at the time simply as "Donnet-Denhaut" or "DD" flying boats, the DD-2, DD-8, DD-9, and DD-10 designations were applied retrospectively to denote the various changes in configuration made during their service life.
The FBA Type H was a French reconnaissance flying boat produced in large numbers in France and Italy during World War I by Franco-British Aviation.
The Macchi L.3, or later Macchi M.3, was an Italian biplane flying boat developed from the earlier L.2.
The Macchi M.C.100 was an Italian commercial flying boat designed and built by Macchi.
The Lohner L was a reconnaissance flying boat produced in Austria-Hungary during World War I. It was a two-bay biplane of typical configuration for the flying boats of the day, with its pusher engine mounted on struts in the interplane gap. The pilot and observer sat side by side in an open cockpit, and both the upper and lower sets of wings featured sweepback.
The Hansa-Brandenburg W.13 was a flying boat bomber developed in Germany in 1917 and used by the Austro-Hungarian Navy during World War I.
The Macchi M.7 was an Italian single-seat fighter flying boat designed by Alessandro Tonini and built by Macchi. A modified version of the M.7, the M.7bis won the Schneider Trophy in 1921.
The Latham 43 was a flying boat bomber built in France in the 1920s for service with the French Navy. It was a conventional design for its day - a two-bay biplane with unstaggered wings, and engines mounted tractor-fashion on struts in the interplane gap. The pilot sat in an open cockpit, with a gunner in an open bow position, and another in an open position amidships.
The Macchi M.8 was an Italian reconnaissance/bomber flying boat designed by Alessandro Tonini and built by Macchi. It was used by the Italian Naval Aviation and was later flown by crews from the United States Navy.
The Lohner E was a reconnaissance flying boat built in Austria-Hungary during World War I. The "E" stood for Igo Etrich, one of the Lohner engineers. It was a conventional design for its day with biplane wings that featured slight sweepback, and an engine mounted pusher-fashion in the interplane gap. Its crew of two was seated in an open cockpit.
The Macchi M.12 was a biplane flying boat bomber designed by Alessandro Tonini, and produced in small numbers by Macchi in Italy in 1918.
The Macchi M.18 was a flying boat designed by Alessandro Tonini and produced by Macchi in Italy in the early 1920s. Originally planned as a passenger aircraft, it entered production as a bomber before eventually being offered on the civil market that it was originally intended for.
The Macchi M.24 was a flying boat designed by Alessandro Tonini and produced by Macchi in Italy during the 1920s. Originally intended as a bomber, it was eventually produced for civilian use as well.
The Macchi M.41 was an Italian flying boat fighter prototype of 1927 designed and manufactured by Macchi. Its production model, the M.41bis, first flown in 1929, was in front line service from 1930 to 1938.
The Macchi M.71 was an Italian flying boat fighter of the 1930s designed and manufactured by Macchi.
The Macchi M.6 was an Italian flying boat fighter prototype of 1917.
The Naval Aircraft Factory XOSN was an American biplane observation floatplane developed by the Naval Aircraft Factory for the United States Navy during the late 1930s.
The Loening XS2L was an American biplane scout amphibian developed by Keystone-Loening, for the United States Navy during the early 1930s.