Macchi M.71 | |
---|---|
Role | Flying boat fighter |
National origin | Italy |
Manufacturer | Macchi |
First flight | 1930 |
Primary user | Regia Marina (Italian Royal Navy) |
Number built | No more than 12 |
Variants | Macchi M.41bis |
The Macchi M.71 was an Italian flying boat fighter of the 1930s designed and manufactured by Macchi.
In 1930, Macchi built a new version of its M.41bis flying boat fighter designed for launching by catapult from warships of the Regia Marina (Italian Royal Navy). The new aircraft, the M.71, built to the same dimensions as the M.41bis and aerodynamically very clean for an aircraft of its type, was identical to the M.41bis in most ways, being a wooden, single-seat, single-bay biplane armed with two fixed, forward-firing 7.7 mm (0.303 in) machine guns, plywood and fabric skinning, unstaggered wings of equal span, a 313 kW (420 hp) Fiat A.20 engine driving a pusher propeller mounted on struts above the hull and below the upper wing, and fitted with a vertical radiator.
The M.71 differed from the M.41bis in having a stronger wing cellule and catapult pick-up points and, to facilitate rapid assembly and disassambly during shipboard operations, it had inclined steel tube struts between the hull, interplane struts, and upper wing section instead of the M.41bis's bracing wires. [1]
The Regia Marina accepted the M.71 for service, and Macchi built a small number of them, probably no more than twelve. They briefly saw service aboard Regia Marina warships during the 1930s until the IMAM Ro.43 reconnaissance floatplane and IMAM Ro.44 floatplane fighter replaced them. [2]
Data from Italian Civil & Military Aircraft 1930-1945 [3] and The Complete Book of Fighters [4]
General characteristics
Performance
Armament
Aircraft of comparable role, configuration, and era
Related lists
The Fiat CR.25 was an Italian twin-engine reconnaissance-fighter aircraft which served in small numbers for the Regia Aeronautica during World War II.
The Fiat CR.20 was an Italian biplane fighter used during the 1920s and 1930s. Designed by Celestino Rosatelli, it represented an intermediate step from the early biplane CR.1 and the later, successful series CR.30, CR.32 and CR.42.
The Caproni Vizzola F.5 was an Italian fighter aircraft that was built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The IMAM Ro.51 was an Italian fighter aircraft that first flew in 1937. It was designed for the 1936 new fighter contest for the Regia Aeronautica, with practically all the Italian aircraft builders involved.
The IMAM Ro.57 was an Italian twin-engined, single-seat monoplane fighter of the Regia Aeronautica. Based on a 1939 design by Giovanni Galasso the aircraft did not enter production until 1943.
The CANT 25 was an Italian shipboard single-seat sesquiplane flying boat fighter that entered service with the Regia Aeronautica in 1931.
The SIAI S.52 was an Italian fighter prototype of 1924.
The Caproni Ca.70 was a two-seat night fighter and ground attack biplane produced in Italy in 1925. It was the only Italian aircraft designed from the outset as a night fighter.
The Caproni Ca.71, originally Ca.70L, was a two-seat biplane night fighter produced in Italy in 1927. It was derived from the Caproni Ca.70 of 1925.
The Caproni CH.1 was a single-seat biplane fighter, a single example of which was produced as a prototype in Italy in 1935.
The Caproni Vizzola F.4 was an Italian fighter aircraft prototype that was designed in 1937 and built from 1939. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The Piaggio P.2 was an Italian fighter prototype of advanced design built by Piaggio in 1923.
The Gabardini G.8 was an Italian single-seat aircraft produced in both fighter and trainer versions by Gabardini in 1923.
The Gabardini G.9 was an Italian single-seat biplane fighter prototype produced by Gabardini in 1923.
The Marchetti MVT, later renamed SIAI S.50, was an Italian fighter of 1919 and the early 1920s.
The SIAI S.58 or Savoia-Marchetti S.M.58 was an Italian flying boat fighter prototype of the 1920s designed and manufactured by SIAI.
The SIAI S.67 or Savoia Marchetti SM.67 was an Italian flying boat fighter of the early 1930s designed and manufactured by SIAI.
The Macchi M.26 was an Italian flying boat fighter prototype of 1924 designed and manufactured by Macchi.
The Macchi M.41 was an Italian flying boat fighter prototype of 1927 designed and manufactured by Macchi. Its production model, the M.41bis, first flown in 1929, was in front line service from 1930 to 1938.
The Macchi M.6 was an Italian flying boat fighter prototype of 1917.