Macchi M.20 | |
---|---|
Photograph of a Macchi M.20 in the 1 May 1926 issue of Aero Digest. | |
Role | Civil trainer |
National origin | Italy |
Manufacturer | Aeronautica Macchi |
Designer | Alessandro Tonini |
First flight | ca. 1919 |
Retired | ca. 1940 |
The Macchi M.20 was a single-engine biplane trainer aircraft produced by the Italian aeronautical company Aeronautica Macchi between the end of the 1910s and the beginning of the 1920s.
Produced in small numbers and intended for the civil aviation market, the M.20 was developed in parallel with the Macchi M.16, a single-seat civil sport plane. [1]
When military production orders disappeared at the end of World War I in November 1918, the Macchi technical office, under the direction at the time of the aeronautical engineer Alessandro Tonini, began the development of two new light aircraft models for the civil aviation market. The two aircraft were the M.16, intended for recreational aviation, and the M.20, equipped with dual controls and suitable for pilot training. The M.16 and M.20 had a common design origin and identical configurations as single-engine biplanes with fixed landing gear. [1]
The M.20 was a conventional aircraft for its time: a single-engine, two-seat biplane with fixed landing gear. The narrow-track landing gear had internal shock absorbers. The M.20 had a deep fuselage of a wooden lattice structure that was free of tensioners and metal cables, eliminating the need to adjust tie rods. Its dual controls were disengagable. [2] The limited power of its 34-kilowatt (45-horsepower) engine affected its performance despite its low empty weight, described as 250 and 340 kilograms (551 and 750 lb) by different sources. [1] [2]
In 1925, when Mario Castoldi took over the role of technical director at Macchi, the M.20 was redesigned with a thicker airfoil and ailerons added to its upper wings. [2] The new features could be backfitted onto existing M.20s. [2]
One M.20 was experimentally equipped with floats for operation as a floatplane. [2]
The Macchi M.20 first flew soon after the end of World War I. Competing in the civilian marketplace with a glut of surplus military aircraft in the aftermath of World War I, the M.20 had limited commercial success and was produced only in small numbers. Both individuals and flying clubs operated M.20 aircraft, and the type remained in service until around the time of Italy′s entry into World War II in 1940. [2]
On 12 October 1924, an M.20 piloted by Giovanni De Briganti won the Coppa Italia ("Italian Cup") race, run on the circuit Ciampino–Montecelio–Centocelle. [2]
An M.20 on display at the Gianni Caproni Museum of Aeronautics in Trento, Italy, is as of 2012 the oldest surviving example of an original Macchi-designed aircraft in Italy. [2] Probably built sometime between 1920 and 1925, [2] it subsequently was modified with the new wings and ailerons introduced in 1925. [2] The Società Anonima Aerocentro Emiliano purchased it in 1929, installed a Salmson 9 AD engine in it, and in March 1930 registered it as I-AABO. [2] The Aero Club of Rimini purchased it in September 1933, and subsequently it was written off after an accident. [2] The Milanese aeronautical engineer and aircraft manufacturer Piero Magni purchased it, and in 1939 he modified it, giving it rounded and elongated wing tips, enlarged cockpits, and different fletchings, but in its modified form it did not receive a certificate of airworthiness. [2]
The Caproni brothers acquired the aircraft′s fuselage and wings from the aeronautical engineer and aviation pioneer Pier Carlo Bergonzi during the 1950s, [2] and it became part of the collection of the Gianni Caproni Museum of Aeronautics during the 1970s.[ citation needed ] It underwent restoration by the Masterfly company between 1988 and 1990. [2] It is painted in the markings of an unregistered M.20 racer of the 1924–1925 period. [2]
Data from Macchi M.20 [1]
General characteristics
Performance
Related development
Caproni, also known as Società de Agostini e Caproni and Società Caproni e Comitti, was an Italian aircraft manufacturer. Its main base of operations was at Taliedo, near Linate Airport, on the outskirts of Milan.
The Caproni Ca.60 Transaereo, often referred to as the Noviplano (nine-wing) or Capronissimo, was the prototype of a large nine-wing flying boat intended to become a 100-passenger transatlantic airliner. It featured eight engines and three sets of triple wings.
The Caproni Ca.100 was the standard trainer aircraft of the Regia Aeronautica in the 1930s. Large numbers of this tandem, two-seat, biplane were built, powered by different engines.
The Caproni Ca.1 was an experimental biplane built in Italy in 1910. It was the first aircraft to be designed and built by aviation pioneer Gianni Caproni, although he had previously collaborated with Henri Coandă on sailplane designs.
The Stipa-Caproni, also known as the Caproni Stipa, was an experimental Italian aircraft designed in 1932 by Luigi Stipa (1900–1992) and built by Caproni. It featured a hollow, barrel-shaped fuselage with the engine and propeller completely enclosed by the fuselage—in essence, the whole fuselage was a single ducted fan. Although the Regia Aeronautica was not interested in pursuing development of the Stipa-Caproni, its design influenced the development of jet propulsion.
The Macchi M.70, was an Italian light biplane of the late 1920s built by Macchi.
The Caproni Ca.125 was a single-engine, tandem two-seat, touring biplane built in Italy in 1933. It could be operated either as a landplane or seaplane.
The Gianni Caproni Museum of Aeronautics is Italy's oldest aviation museum, as well as the country's oldest corporate museum. It was established in 1927 as the Caproni Museum by Italian aviation pioneer and aeronautical engineer, Giovanni Battista "Gianni" Caproni and his wife, Timina Guasti Caproni.
The Caproni Ca.193 was an Italian liaison and air-taxi aircraft that was offered to the Italian Air Force as an instrument flight trainer and to the Navy for liaison. Design work started in 1945 and only the prototype was built. It was the last aircraft the Caproni company designed and built in Milan.
The Caproni Ca.134 was a biplane reconnaissance aircraft built by the Italian company Caproni in the 1930s.
The Caproni Ca.16 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.9 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.6 was a single-engine biplane designed and built by Caproni in the early 1910s.
The Caproni Ca.7 was a proposed biplane designed by Caproni in the early 1910s.
The Caproni Ca.8 was a single-seat monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.13 was a two-seater single-engine monoplane built by Caproni in the early 1910s.
The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.
The Caproni Ca.103 was a biplane twin-engine bomber developed by the Italian company Aeronautica Caproni in the late 1920s.
The Caproni Ca.105 was a multirole high wing single engine monoplane developed by the Italian aeronautical company Aeronautica Caproni in the late 1920s.
The Caproni Ca.53 was an Italian prototype light bomber built in the last months of World War I.