Mechanical weed control

Last updated

Mechanical weed control is a physical activity that inhibits unwanted plant growth. [1] Mechanical, or manual, weed control techniques manage weed populations through physical methods that remove, injure, kill, or make the growing conditions unfavorable. Some of these methods cause direct damage to the weeds through complete removal or causing a lethal injury. Other techniques may alter the growing environment by eliminating light, increasing the temperature of the soil, or depriving the plant of carbon dioxide or oxygen. [2] Mechanical control techniques can be either selective or non-selective. A selective method has very little impact on non-target plants where as a non-selective method affects the entire area that is being treated. If mechanical control methods are applied at the optimal time and intensity, some weed species may be controlled or even eradicated. [3]

Contents

Methods

Weed pulling

Pulling methods uproot and remove the weed from the soil. Weed pulling can be used to control some shrubs, tree saplings, and herbaceous plants. Annuals and tap-rooted weeds tend to be very susceptible to pulling. Many species are able to re-sprout from root segments that are left in the soil. Therefore, the effectiveness of this method is dependent on the removal of as much of the root system as possible. [2] Well established perennial weeds are much less effectively controlled because of the difficulty of removing all of the root system and perennating plant parts. Small herbaceous weeds may be pulled by hand, but larger plants may require the use of puller tools like the Weed Wrench or the Root Talon. [3] This technique has a little to no impact on neighboring, non-target plants and has a minimal effect on the growing environment. However, pulling is labor-intensive and time-consuming, making it a more suitable method to use for small weed infestations. [1]

Mowing

Mowing methods cut or shreds the above ground of the weed and can prevent and reduce seed populations as well as restrict the growth of weeds. [3] Mowing can be a very successful control method for many annual weeds. Mowing is the most effective when it is performed before the weeds are able to set seed because it can reduce the number of flower stalks and prevent the spread of more seed. However, the biology of the weed must be considered before mowing. Some weed species may sprout with increased vigor after being mowed. Also, some species are able to re-sprout from stem or root segments that are left behind after mowing. [4] Brush cutting and weed eating are also mowing techniques that reduce the biomass of the weeds. Repeatedly removing biomass causes reduced vigor in many weed species. This method is usually used in combination with other control methods such as burning or herbicide treatments. [2]

Mulching

Mulch is a layer of material that is spread on the ground. Compared with some other methods of weed control, laying weed mulch mat is relatively simple and inexpensive. [5] Mulching smothers the weeds by excluding light and providing a physical barrier to impede their emergence. [2] Mulching is successful with most annual weeds, however, some perennial weeds are not affected. [2] Mulches may be organic or synthetic. Organic mulches consist of plant by products such as: pine straw, wood chips, green waste, compost, leaves, and grass clippings. Synthetic mulches, also known as ground cover fabric, can be made from materials like polyethylene, polypropylene, or polyester. [6] [7] The effectiveness of mulching is mostly dependent on the material used. Organic and synthetic mulches may be used in combination with each other to increase the amount of weeds controlled. [6]

Tillage

Tillage, also known as cultivation, is the turning over of the soil. This method is more often used in agricultural crops. [6] Tillage can be performed on a small scale with tools such as small, hand pushed rotary tillers or on a large scale with tractor mounted plows. [3] Tillage is able to control weeds because when the soil is overturned, the vegetative parts of the plants are damaged and the root systems are exposed causing desiccation. [8] Generally, the younger the weed is, the more readily it can be controlled with tillage. [6] To control mature perennial weeds, repeated tillage is necessary. By continually destroying new growth and damaging the root system, the weed's food stores are depleted until it can no longer re-sprout. [6] Also, when the soil is overturned, the soil seed bank is disrupted which can cause dormant weed seeds to germinate in the absence of the previous competitors. These new weeds can also be controlled by continued tillage until the soil seed bank is depleted. [4]

Soil solarization

Soil solarization involves covering the soil with a layer of clear or black plastic which traps heat energy from the sun and raises the temperature of the soil. [4] Many weed seeds and vegetative propagules are not able to withstand the temperatures and are killed. For this method to be most effective, it needs to be implemented during the summer months and the soil should be moist. [9] Cool season weeds are more susceptible to soil solarization than are warm season weeds. [4] Using black plastic as a cover excludes light which can help to control plants that are growing whereas clear plastic has been shown to produce higher soil temperatures. [6]

Fire

Burning and flaming can be economical and practical methods of weed control if used carefully. For most plants, fire causes the cell walls to rupture when they reach a temperature of 45 °C (113 °F) to 55 °C (131 °F). [6] Burning is commonly used to control weeds in forests, ditches, and roadsides. [4] Burning can be used to remove accumulated vegetation by destroying the dry, matured plant matter as well as killing the green new growth. Buried weed seeds and plant propagules may also be destroyed during burning, however, dry seeds are much less susceptible to the increased temperature. [6] Flaming is used on a smaller scale and includes the use of a propane torch with a fan tip. Flaming may be used to control weeds along fences and paved areas or places where the soil may be too wet to hoe, dig, or till. Flaming is most effective on young weeds that are less than two inches tall but repeated treatments may control tougher perennial weeds. [9]

Lasers

In precision agriculture, novel agricultural robots can use lasers for weed control. [10] Their benefits may include "healthier crops and soil, decreased herbicide use, and reduced chemical and labor costs". [10]

Flooding

Flooding is a method of control that requires the area being treated to be saturated at a depth of 15 to 30 cm for a period of 3 to 8 weeks. The saturation of the soil reduces the availability of oxygen to the plant roots thereby killing the weed. [6] This method has been shown to be highly effective in controlling establish perennial weeds and may also suppress annual weeds by reducing the weed seed populations. [4]

Environmental effects

Mechanical methods of weed control cause physical changes in the immediate environment that may cause positive or negative effects. The suppression of the targeted weeds will open niches in the environment and may also stimulate the growth of other weeds by decreasing their competition and making their environment more favorable. If the niches are not filled by a desirable plant, they will eventually be taken over by another weed. These weed control methods also effect the structure of the soil. The use of mulches can help decrease erosion, decrease water evaporation from the soil, as well as improve the soil structure by increasing the amount of organic matter. Tillage practices can help decrease compaction and aerate the soil. On the other hand, tillage has also been shown to decrease soil moisture, increase soil erosion and runoff, as well as decrease soil microbial populations. Solarization can cause changes in the biological, physical, and chemical properties of the soil. This can cause the soil to be an unfavorable environment for native species which may be beneficial or harmful. [3]

See also

Related Research Articles

<span class="mw-page-title-main">Tillage</span> Preparation of soil by mechanical agitation

Tillage is the agricultural preparation of soil by mechanical agitation of various types, such as digging, stirring, and overturning. Examples of human-powered tilling methods using hand tools include shoveling, picking, mattock work, hoeing, and raking. Examples of draft-animal-powered or mechanized work include ploughing, rototilling, rolling with cultipackers or other rollers, harrowing, and cultivating with cultivator shanks (teeth).

<span class="mw-page-title-main">Crop rotation</span> Agricultural practice of changing crops

Crop rotation is the practice of growing a series of different types of crops in the same area across a sequence of growing seasons. This practice reduces the reliance of crops on one set of nutrients, pest and weed pressure, along with the probability of developing resistant pests and weeds.

The stale seed bed or false seed bed method is a weed control technique used at both the farm and garden scales. In this that the young weeds can then be easily eliminated. By destroying them early, the farmer or gardener eliminates most of that season's annual weeds, which reduces their labor and improves their crop yields.

<span class="mw-page-title-main">Weed control</span> Botanical component of pest control for plants

Weed control is a type of pest control, which attempts to stop or reduce growth of weeds, especially noxious weeds, with the aim of reducing their competition with desired flora and fauna including domesticated plants and livestock, and in natural settings preventing non native species competing with native species.

<span class="mw-page-title-main">Cover crop</span> Crop planted to manage erosion and soil quality

In agriculture, cover crops are plants that are planted to cover the soil rather than for the purpose of being harvested. Cover crops manage soil erosion, soil fertility, soil quality, water, weeds, pests, diseases, biodiversity and wildlife in an agroecosystem—an ecological system managed and shaped by humans. Cover crops can increase microbial activity in the soil, which has a positive effect on nitrogen availability, nitrogen uptake in target crops, and crop yields. Cover crops may be an off-season crop planted after harvesting the cash crop. Cover crops are nurse crops in that they increase the survival of the main crop being harvested, and are often grown over the winter. In the United States, cover cropping may cost as much as $35 per acre.

<span class="mw-page-title-main">Mulch</span> Layer of material applied to the surface of soil

A mulch is a layer of material applied to the surface of soil. Reasons for applying mulch include conservation of soil moisture, improving fertility and health of the soil, reducing weed growth, and enhancing the visual appeal of the area.

<span class="mw-page-title-main">Polyculture</span> Growing multiple crops together in agriculture

In agriculture, polyculture is the practice of growing more than one crop species together in the same place at the same time, in contrast to monoculture, which had become the dominant approach in developed countries by 1950. Traditional examples include the intercropping of the Three Sisters, namely maize, beans, and squashes, by indigenous peoples of Central and North America, the rice-fish systems of Asia, and the complex mixed cropping systems of Nigeria.

<span class="mw-page-title-main">Dryland farming</span> Non-irrigated farming in areas with little rainfall during the growing season.

Dryland farming and dry farming encompass specific agricultural techniques for the non-irrigated cultivation of crops. Dryland farming is associated with drylands, areas characterized by a cool wet season followed by a warm dry season. They are also associated with arid conditions, areas prone to drought and those having scarce water resources.

<span class="mw-page-title-main">No-till farming</span> Agricultural method

No-till farming is an agricultural technique for growing crops or pasture without disturbing the soil through tillage. No-till farming decreases the amount of soil erosion tillage causes in certain soils, especially in sandy and dry soils on sloping terrain. Other possible benefits include an increase in the amount of water that infiltrates into the soil, soil retention of organic matter, and nutrient cycling. These methods may increase the amount and variety of life in and on the soil. While conventional no-tillage systems use herbicides to control weeds, organic systems use a combination of strategies, such as planting cover crops as mulch to suppress weeds.

<span class="mw-page-title-main">Plastic mulch</span> Plastic film used in the role of mulch

Plastic mulch is a product used in plasticulture in a similar fashion to mulch, to suppress weeds and conserve water in crop production and landscaping. Certain plastic mulches also act as a barrier to keep methyl bromide, both a powerful fumigant and ozone depleter, in the soil. Crops grow through slits or holes in thin plastic sheeting. Plastic mulch is often used in conjunction with drip irrigation. Some research has been done using different colors of mulch to affect crop growth. Use of plastic mulch is predominant in large-scale vegetable growing, with millions of acres cultivated under plastic mulch worldwide each year.

<span class="mw-page-title-main">Living mulch</span> Cover crop grown with a main crop as mulch

In agriculture, a living mulch is a cover crop interplanted or undersown with a main crop, and intended to serve the purposes of a mulch, such as weed suppression and regulation of soil temperature. Living mulches grow for a long time with the main crops, whereas cover crops are incorporated into the soil or killed with herbicides.

<i>Melilotus albus</i> Species of flowering plant in the bean family Fabaceae

Melilotus albus, known as honey clover, white melilot (UK), Bokhara clover (Australia), white sweetclover (US), and sweet clover, is a nitrogen-fixing legume in the family Fabaceae. Melilotus albus is considered a valuable honey plant and source of nectar and is often grown for forage. Its characteristic sweet odor, intensified by drying, is derived from coumarin.

In permaculture, sheet mulching is an agricultural no-dig gardening technique that attempts to mimic the natural soil-building process in forests. When deployed properly and in combination with other permaculture principles, it can generate healthy, productive, and low maintenance ecosystems.

<span class="mw-page-title-main">Weed</span> Plant considered undesirable in a particular place or situation

A weed is a plant considered undesirable in a particular situation, growing where it conflicts with human preferences, needs, or goals. Plants with characteristics that make them hazardous, aesthetically unappealing, difficult to control in managed environments, or otherwise unwanted in farm land, orchards, gardens, lawns, parks, recreational spaces, residential and industrial areas, may all be considered weeds. The concept of weeds is particularly significant in agriculture, where the presence of weeds in fields used to grow crops may cause major losses in yields. Invasive species, plants introduced to an environment where their presence negatively impacts the overall functioning and biodiversity of the ecosystem, may also sometimes be considered weeds.

The term cropping system refers to the crops, crop sequences and management techniques used on a particular agricultural field over a period of years. It includes all spatial and temporal aspects of managing an agricultural system. Historically, cropping systems have been designed to maximise yield, but modern agriculture is increasingly concerned with promoting environmental sustainability in cropping systems.

<i>Taeniatherum</i> Genus of grasses

Taeniatherum is a genus of Eurasian and North African plants in the grass family.

<span class="mw-page-title-main">Perennial rice</span> Varieties of rice that can grow season after season without re-seeding

Perennial rice are varieties of long-lived rice that are capable of regrowing season after season without reseeding; they are being developed by plant geneticists at several institutions. Although these varieties are genetically distinct and will be adapted for different climates and cropping systems, their lifespan is so different from other kinds of rice that they are collectively called perennial rice. Perennial rice—like many other perennial plants—can spread by horizontal stems below or just above the surface of the soil but they also reproduce sexually by producing flowers, pollen and seeds. As with any other grain crop, it is the seeds that are harvested and eaten by humans.

<span class="mw-page-title-main">Kudzu in the United States</span> Plant invasion

Kudzu is an invasive plant species in the United States, introduced from Asia with devastating environmental consequences, earning it the nickname "the vine that ate the South". It has been spreading rapidly in the Southern United States, "easily outpacing the use of herbicide, spraying, and mowing, as well increasing the costs of these controls by $6 million annually". Estimates of the vine's spread vary, from the United States Forest Service's 2015 estimate of 2,500 acres per year to the Department of Agriculture's estimate of as much as 150,000 acres annually.

<span class="mw-page-title-main">Organic beans</span>

Organic beans are produced and processed without the use of synthetic fertilizers and pesticides. In 2008, over 2,600,000 acres (11,000 km2) of cropland were certified organic in the United States. Dry beans, snap beans, and soybeans were grown on 16,000 acres (65 km2), 5,200 acres (21 km2), and 98,000 acres (400 km2), respectively.

This glossary of agriculture is a list of definitions of terms and concepts used in agriculture, its sub-disciplines, and related fields, including horticulture, animal husbandry, agribusiness, and agricultural policy. For other glossaries relevant to agricultural science, see Glossary of biology, Glossary of ecology, Glossary of environmental science, and Glossary of botanical terms.

References

  1. 1 2 Bell, Carl; Dean Lehman (June 2005). "Best Management Practices for Vegetation Management" (PDF). Los Angeles County Weed Management Area. Archived from the original (PDF) on 2012-04-25. Retrieved 17 Feb 2012.
  2. 1 2 3 4 5 Tu; et al. "Manual & Mechanical Control Techniques" (PDF). The Nature Conservancy. Retrieved 4 April 2012.
  3. 1 2 3 4 5 "Managing Invasive Plants: Concepts, Principles, and Practices". United States Fish & Wildlife Service. Retrieved 19 Feb 2012.
  4. 1 2 3 4 5 6 Crafts, Alden S. (1975). Modern Weed Control. Berkeley, California: University of California Press. pp. 110–117. ISBN   0-520-02733-7.
  5. ↑ coirmedia (2024-03-18). "How to Lay Weed Mat? %". Coirmedia. Retrieved 2024-03-26.
  6. 1 2 3 4 5 6 7 8 9 Rao, V.S. (2000). Principles of Weed Science. Enfield, New Hampshire: Science Publishers, Inc. pp. 39–48. ISBN   1-57808-069-X.
  7. ↑ "A Landscaper's Guide to Mulch" (PDF). California Integrated Waste Management Board. Archived from the original (PDF) on 2011-06-01. Retrieved 12 Feb 2012.
  8. ↑ Turgeon; et al. (2009). Weed Control in Turf and Ornamentals. Upper Saddle River, New Jersey: Pearson Education, Inc. pp. 127–129. ISBN   0-13-159122-3.
  9. 1 2 Hynes, Erin (1995). Controlling Weeds. Emmaus, Pennsylvania: Rodale Press. pp. 26–30. ISBN   0-87596-667-5.
  10. 1 2 Papadopoulos, Loukia (21 October 2022). "This new farming robot uses lasers to kill 200,000 weeds per hour". interestingengineering.com. Retrieved 17 November 2022.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.