This article needs additional citations for verification .(August 2015) |
Mi-30 | |
---|---|
Role | Tiltrotor |
National origin | Soviet Union |
Manufacturer | Mil |
Status | Study |
The Mil Mi-30 Vintoplan was a Russian tiltrotor STOL/VTOL concept that originated in 1972. The Vintoplan would have been a transport aircraft for up to 19 passengers or two tons of cargo. Its purpose was to replace the Mi-8 and Mi-17 helicopters. [1]
The first tiltrotor aircraft companies were founded in the 1940s; the Vintoplan project was picked up and continued by these companies a few years after the first development. The Mil Design Bureau closely followed the tiltrotor projects at Bell Helicopters, and the concept that Bell proposed seemed to them convincing. In 1972 Mil designers initiated a similar design, the Mi-30. [1] At the beginning of the 1980s, scientists and helicopter designers assembled a design and several layouts for this complicated aircraft, the original design of the Mil Mi-30 Vintoplan was expected to use a TV3-117 turboshaft engine with a four-bladed propeller rotor on each wing. The original design of the Mil Mi-30 had several problems: Aeroelasticity, dynamics of construction, characteristics for the converter apparatuses, aerodynamics and flight dynamics. [1] The Vintoplan went through several different designs and layouts, shifting from having 2 engines to 3 or 4 engines and back to 2 engines. [2]
In 1981 an issued decree on the development of the Mi-30 Vintoplan made a proposal to the customer and institutions at MAP, shortly after the military approved of the Vintoplan but desired bigger, more powerful engines. In the development the weight capacity was raised to 3–5 tons, and the passenger limit was raised to 32. [2] In 1986–1995 the Mil Mi-30 was included in the program of armaments. However, due to the collapse of the Soviet Union and its economy, the Mil Mi-30 did not succeed in the new age of technology. [1]
The Mi-30 Vintoplan was included in the 5-year plan in the Soviet Union from 1989 to 1995, but the project was never completed. In the last year, OKB experts in the Soviet Union designed three different models of the Mil Mi-30, each with unique designs- Mi-30S, Mi-30D, and the Mi-30L. [1]
An unmanned tiltrotor project was started in Russia in 2015. [3] [4]
Aircraft of comparable role, configuration, and era
Related lists
A vertical take-off and landing (VTOL) aircraft is one that can take off and land vertically without relying on a runway. This classification can include a variety of types of aircraft including helicopters as well as thrust-vectoring fixed-wing aircraft and other hybrid aircraft with powered rotors such as cyclogyros/cyclocopters and gyrodynes.
A tiltrotor is an aircraft that generates lift and propulsion by way of one or more powered rotors mounted on rotating shafts or nacelles usually at the ends of a fixed wing. Almost all tiltrotors use a transverse rotor design, with a few exceptions that use other multirotor layouts.
The Bell XV-15 is an American tiltrotor VTOL aircraft. It was the second successful experimental tiltrotor aircraft and the first to demonstrate the concept's high speed performance relative to conventional helicopters.
A tail-sitter, or tailsitter, is a type of VTOL aircraft that takes off and lands on its tail, then tilts horizontally for forward flight.
The Leonardo AW609, formerly the AgustaWestland AW609, and originally the Bell-Agusta BA609, is a twin-engined tiltrotor VTOL aircraft with an overall configuration similar to that of the Bell Boeing V-22 Osprey. It is capable of landing vertically like a helicopter while having a range and speed in excess of conventional rotorcraft. The AW609 is aimed at the civil aviation market, in particular VIP customers and offshore oil and gas operators. It has progressed from a concept in the late 1990s, to development and testing, and is working towards certification in the 2020s.
The Curtiss-Wright X-19, company designation Model 200, was an American experimental tiltrotor aircraft of the early 1960s. It was noteworthy for being the last aircraft of any kind manufactured by Curtiss-Wright.
The Bell XV-3 is an American tiltrotor aircraft developed by Bell Helicopter for a joint research program between the United States Air Force and the United States Army in order to explore convertiplane technologies. The XV-3 featured an engine mounted in the fuselage with driveshafts transferring power to two-bladed rotor assemblies mounted on the wingtips. The wingtip rotor assemblies were mounted to tilt 90 degrees from vertical to horizontal, designed to allow the XV-3 to take off and land like a helicopter but fly at faster airspeeds, similar to a conventional fixed-wing aircraft.
A convertiplane is defined by the Fédération Aéronautique Internationale as an aircraft which uses rotor power for vertical takeoff and landing (VTOL) and converts to fixed-wing lift in normal flight. In the US it is further classified as a sub-type of powered lift. In popular usage it sometimes includes any aircraft that converts in flight to change its method of obtaining lift.
The Bell Boeing Quad TiltRotor (QTR) is a proposed four-rotor derivative of the Bell Boeing V-22 Osprey developed jointly by Bell Helicopter and Boeing. The concept is a contender in the U.S. Army's Joint Heavy Lift program. It would have a cargo capacity roughly equivalent to the C-130 Hercules, cruise at 250 knots, and land at unimproved sites vertically like a helicopter.
A powered lift aircraft takes off and lands vertically under engine power but uses a fixed wing for horizontal flight. Like helicopters, these aircraft do not need a long runway to take off and land, but they have a speed and performance similar to standard fixed-wing aircraft in combat or other situations.
A tiltjet is an aircraft propulsion configuration that was historically tested for proposed vertical take-off and landing (VTOL)-capable fighters.
The Baldwin Mono Tiltrotor project is a research effort into a tiltrotor aircraft that uses only one rotor. Like other tiltrotor configurations, the mono tiltrotor combines the vertical lift capability and structural efficiency of a helicopter with the speed and range of a fixed-wing aircraft.
The AgustaWestland Project Zero is a hybrid tiltrotor/Lift fan aircraft. It has been developed by AgustaWestland as a technology demonstrator, and is used to investigate all-electric propulsion and other advanced technologies. It is the world's first electric tiltrotor aircraft.
The Vertical Take-Off and Landing Experimental Aircraft program was an American research project sponsored by the Defense Advanced Research Projects Agency (DARPA). The goal of the program was to demonstrate a VTOL aircraft design that can take off vertically and efficiently hover, while flying faster than conventional rotorcraft. There have been many previous attempts, most of them unsuccessful as of 2015.
Urban Air Mobility (UAM) is the use of small, highly automated aircraft to carry passengers or cargo at lower altitudes in urban and suburban areas which have been developed in response to traffic congestion. It usually refers to existing and emerging technologies such as traditional helicopters, vertical-takeoff-and-landing aircraft (VTOL), electrically propelled vertical-takeoff-and-landing aircraft (eVTOL), and unmanned aerial vehicles (UAVs). These aircraft are characterized by the use of multiple electric-powered rotors or fans for lift and propulsion, along with fly-by-wire systems to control them. Inventors have explored urban air mobility concepts since the early days of powered flight. However, advances in materials, computerized flight controls, batteries and electric motors improved innovation and designs beginning in the late 2010s. Most UAM proponents envision that the aircraft will be owned and operated by professional operators, as with taxis, rather than by private individuals.
The Bell V-247 Vigilant is a concept by Bell Helicopter to develop a large tiltrotor unmanned aerial vehicle.
The Leonardo Next-Generation Civil Tiltrotor is a tiltrotor aircraft demonstrator designed and developed by the Italian aerospace company Leonardo S.p.A. Studies for a two times larger tiltrotor than the AgustaWestland AW609 started in 2000. Since 2014, its development is sponsored by the European Union's Clean Sky 2 program. By May 2021, major components were under production By 2023, the maiden flight had been pushed back to 2024, from a 2020 initial plan.