Milwaukee Road class EF-1

Last updated
Milwaukee Road EF-1
Milwaukee Road 2-unit boxcab electric.jpg
EF-1 #E50 in the Deer Lodge, Montana engine house, October 1974
Type and origin
Power typeElectric
BuilderGeneral Electric
Build date1915–1916
Total produced42 locomotives (84 half-units)
Specifications
Configuration:
   AAR 2-B+B+B+B-2
   UIC (2′Bo)(Bo)+(Bo)(Bo2′)
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Length112 ft [1]
Loco weight564,000 lb (256,000 kg; 256 t) [1]
Electric system/s 3000 V d.c.
Performance figures
Power outputContinuous: 3,340 hp (2.49 MW),
One hour: 4,100 hp (3.06 MW)
Career
Operators Milwaukee Road
Class EP-1
LocaleNorthwest United States
RetiredJanuary 1951–June 1974
PreservedE50 (EF-1), E57B (ES-3)
Disposition1 EF-1 and 1 ES-3 preserved, remainder scrapped

The Chicago, Milwaukee, St. Paul and Pacific Railroad (Milwaukee Road) classes EP-1 and EF-1 comprised 42 boxcab electric locomotives built by the American Locomotive Company (Alco) in 1915. Electrical components were from General Electric. The locomotives were composed of two half-units semi-permanently coupled back-to-back, and numbered as one unit with 'A' and 'B' suffixes. As built, 30 locomotives were assigned to freight service, classified as EF-1 and numbered 10200–10229. The remaining twelve locomotives were assigned to passenger service as class EP-1, numbered 10100–10111, with higher-speed passenger gearing. The design was highly successful, replacing a much larger number of steam locomotives, cutting costs and improving schedules. General Electric self-proclaimed this electric locomotive to be the “King of the Rails” in a silent promotional film from 1915. [2]

Contents

In 1919, with the arrival of a newer generation of passenger power, the EP-1 locomotives were converted to EF-1 freight locomotives, and renumbered 10230–10241. In this role, they served until the 1950s, when the arrival of the Little Joe locomotives began to replace them in freight service.

Technical information

EF-1 #10203, as new. MILW EF-1 10203.jpg
EF-1 #10203, as new.
EF-1 side-view drawing. MILW EF-1 sideview.jpg
EF-1 side-view drawing.

They were fitted with multiple-unit train control systems, and could thus be joined together into larger sets and operated from a single control station. They were also retrofitted with a special multiple unit control system designed by an electrical engineer of The Milwaukee Road. This enabled the crew of a boxcab to control trailing diesel electric locomotives. However, the EF-4 "Little Joes", which were also retrofitted, were more often seen leading diesel electrics than boxcabs, which had by then been largely relegated to the role of helper or bank engine.

The maximum speed of an EF-1 as built was 35 miles per hour (56 km/h). Higher speeds led to excessive strain on the traction motor armatures. The rebuilding programme of the 1950s raised this to 45 miles per hour (72 km/h) to help maintain faster schedules.

The two powered trucks were connected together with a ball-and-socket joint, and the couplers were also attached to the trucks. The bodywork, therefore, did not take the load of the train. Each truck had outside bar frames, allowing more room for the traction motors and equipment. The front powered truck's frames extended forward and carried an outrigger truck and the heavy snowplows the units bore.

EF-2, EF-3, EF-5 and ES-3

In the 1930s, with train tonnage increasing, the Milwaukee began to create three-unit locomotives out of the boxcab units. A simple combination of three was classified EF-2. Twelve EF-2s were assembled, and renumbered 10500–10511ACB. On these, the cab on the center (C) unit was unnecessary and just added weight and length. The center units were therefore shortened by removing the cab, the pilot truck and the frame extension; these were nicknamed "bobtails". These were assembled in between two standard units to create EF-3 sets. These "bobtail" units weighed 52,000 lb (23.6 t) less than a regular unit. Additional EF-2s were created, but no more were modified into "bobtails". The locomotives were renumbered in 1939, the EF-3s being numbered E25–E36, and the EF-1s E50–E73.

In 1951, five four-unit locomotives were created; these were classified EF-5 and could have any combination of regular or bobtail units in the center two positions. Their numbers gradually increased until 10 were in service in 1961.

When an odd number of EF-2s were created, a single boxcab unit became surplus. This unit was classified as a heavy switcher and given class ES-3.

EP-1A

In 1953, two EF-1 locomotives, E69A/B and E28A/B were converted back into passenger service as class EP-1A to help the aging Bi-Polars on the Puget Sound Extension. The first to receive this treatment was E69, which became E22A/B. During the rebuilding process, they received steam generators, engine trucks from scrapped F7 Hudsons, and high speed gearing. E28 soon followed a few months later and emerged as E23A/B. E22A and E23A received some smoothing of their appearances, including somewhat "streamlined" cab fronts. They were later repainted into the Union Pacific Railroad scheme of Armour Yellow with Harbor Mist Gray roofs, and red dividing lines. After rebuilding, they could develop 4500 hp. These two locomotives served until March 1961 in this role; at which time, the E23A and E23B were renumbered E22D and E22C. The EP-1a's all became a part of EF-5 E22A/B/C/D until 1966 when E22C was wrecked and the 3 remaining units operated as A/B/D set. E22A/B/D was finally scrapped in 1973.

Retirements

Unit E57B in Harlowton, MT The Milwaukee Road Engine E57B on display in Harlowton, Montana.jpg
Unit E57B in Harlowton, MT

The fleet stayed intact until 1951, when two EF-1s were retired – E51A+B and E68A+B. Two units of an EF-2 were retired in 1954, and the remaining numbers held steady until the mid-1960s, when old age began to take its toll. Locomotives were patched up until unrepairable, and units within were swapped between locomotives without being renumbered.

Most were retired by the end of 1973, but one unit, E57B and its "bobtail" companion, were kept in service as the Harlowton, Montana, switcher until June 1974.

Today

Unit E50A+B, originally 10200A+B, the first locomotive built, still survives and is preserved at the Lake Superior Railroad Museum in Duluth, Minnesota. Unit E57B, originally 10211B, is now preserved at Harlowton, Montana. Both are on static display.

Notes

  1. 1 2 "Electrification of 440.5 Miles of the St. Paul". Railway Age Gazette: 689. October 15, 1915.
  2. "King of the Rails". General Electric silent promotional film, 1915. Archived from the original on 2021-12-21. Retrieved February 7, 2019.

Related Research Articles

<span class="mw-page-title-main">Diesel locomotive</span> Locomotive powered by a diesel engine

A diesel locomotive is a type of railway locomotive in which the power source is a diesel engine. Several types of diesel locomotives have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels. The most common are diesel-electric locomotives and diesel-hydraulic.

<span class="mw-page-title-main">4-6-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of locomotives, 4-6-4 represents the wheel arrangement of four leading wheels, six powered and coupled driving wheels and four trailing wheels. In France where the type was first used, it is known as the Baltic while it became known as the Hudson in most of North America.

The AAR wheel arrangement system is a method of classifying locomotive wheel arrangements that was developed by the Association of American Railroads. Essentially a simplification of the European UIC classification, it is widely used in North America to describe diesel and electric locomotives. It is not used for steam locomotives,, which use the Whyte notation instead.

<span class="mw-page-title-main">Little Joe (electric locomotive)</span> Class of General Electric locomotives

The Little Joe is a type of railroad electric locomotive built by General Electric. The locomotives had twelve axles, eight of them powered, in a 2-D+D-2 arrangement. They were originally intended to be exported to the Soviet Union and designed to operate on Soviet Railways (SZhD) 3,300-volt DC overhead line system. They were never exported to the Soviet Union due to rising political tensions. Only 20 were built, with 15 sold to domestic operators and five exported to Brazil.

<span class="mw-page-title-main">EMC 1800 hp B-B</span> Locomotive class

Electro-Motive Corporation produced five 1800 hp B-B experimental passenger train-hauling diesel locomotives in 1935; two company-owned demonstrators, #511 and #512, the Baltimore and Ohio Railroad's #50, and two units for the Atchison, Topeka and Santa Fe Railway, Diesel Locomotive #1. The twin engine power unit layout and multiple unit control systems developed with the B-B locomotives were soon adopted for other locomotives such as the Burlington Route's Zephyr locomotives built by the Budd Company in 1936 and EMC's own EMD E-units introduced in 1937. The B-B locomotives worked as proof-of-concept demonstrators for diesel power with the service loads of full size trains, breaking out of its niche powering the smaller custom Streamliners.

<span class="mw-page-title-main">EMD FT</span> American cab locomotive

The EMD FT is a 1,350-horsepower (1,010 kW) diesel-electric locomotive that was produced between March 1939 and November 1945, by General Motors' Electro-Motive Corporation (EMC), later known as GM Electro-Motive Division (EMD). The "F" stood for Fourteen Hundred (1400) horsepower and the "T" for Twin, as it came standard in a two-unit set. The design was developed from the TA model built for the C,RI&P in 1937, and was similar in cylinder count, axle count, length, and layout. All told 555 cab-equipped ”A” units were built, along with 541 cabless booster or ”B” units, for a grand total of 1,096 units. The locomotives were all sold to customers in the United States. It was the first model in EMD's very successful F-unit series of cab unit freight diesels and was the locomotive that convinced many U.S. railroads that the diesel-electric freight locomotive was the future. Many rail historians consider the FT one of the most important locomotive models of all time.

<span class="mw-page-title-main">EMD SD70 series</span> Locomotive class

The EMD SD70 is a series of diesel-electric locomotives produced by the US company Electro-Motive Diesel. This locomotive family is an extension and improvisation to the EMD SD60 series. Production commenced in late 1992 and since then over 5,700 units have been produced; most of these are the SD70M, SD70MAC, and SD70ACe models. While the majority of the production was ordered for use in North America, various models of the series have been used worldwide. All locomotives of this series are hood units with C-C trucks, except the SD70ACe-P4 and SD70MACH which have a B1-1B wheel configuration, and the SD70ACe-BB, which has a B+B-B+B wheel arrangement.

<span class="mw-page-title-main">EMD SD40-2</span> American diesel-electric locomotive

The EMD SD40-2 is a 3,000-horsepower (2,200 kW) C-C diesel-electric locomotive built by EMD from 1972 to 1989.

<span class="mw-page-title-main">EMD SDP40</span>

An SDP40 is a 6-axle passenger diesel-electric locomotive built by General Motors Electro-Motive Division (EMD) between June 1966 and May 1970.

The Pennsylvania Railroad's class P5 comprised 92 mixed-traffic electric locomotives constructed 1931–1935 by the PRR, Westinghouse and General Electric. Although the original intention was that they work mainly passenger trains, the success of the GG1 locomotives meant that the P5 class were mostly used on freight. A single survivor, prototype #4700, is at the National Museum of Transportation in St Louis, Missouri.

The Pennsylvania Railroad's class L6 comprised three electric locomotives of 2-8-2 wheel arrangement in the Whyte notation. The intention was to build a whole class of freight boxcab locomotives using this design, but the displacement of class P5a to freight work after the introduction of the GG1 meant that there was little need for more electric freight locomotives.

<span class="mw-page-title-main">Milwaukee Road class EP-2</span>

The Milwaukee Road's class EP-2 comprised five electric locomotives built by General Electric in 1919. They were often known as Bipolars, which referred to the bipolar electric motors they used. Among the most distinctive and powerful electric locomotives of their time, they epitomized the modernization of the Milwaukee Road. They came to symbolize the railroad during their nearly 40 years of use, and remain an enduring image of mainline electrification.

<span class="mw-page-title-main">Milwaukee Road class EP-3</span>

The Milwaukee Road's class EP-3 comprised ten electric locomotives built in 1919 by Baldwin and Westinghouse. They were nicknamed Quills because of their use of a quill drive. Although they were good haulers and well liked by engineers, poor design and constant mechanical problems plagued them for their entire lives and they were among the first of the Milwaukee Road's electric locomotives to be retired.

<span class="mw-page-title-main">Milwaukee Road class ES-2</span>

The Milwaukee Road's class ES-2 comprised four electric switcher locomotives. Two were built in 1916 and the final two in 1919. They were of steeplecab design, with a single roof-mounted pantograph to access the Milwaukee's 3,000 V DC overhead line. Originally numbered 10050–10053, they were renumbered E80–E83 in March 1939. The ES-2 was the Milwaukee Road's primary class of dedicated electric switchers.

<span class="mw-page-title-main">ALCO FA</span> American locomotive class

The ALCO FA was a family of B-B diesel locomotives designed to haul freight trains. The locomotives were built by a partnership of ALCO and General Electric in Schenectady, New York, between January 1946 and May 1959. Designed by General Electric's Ray Patten, they were of a cab unit design; both cab-equipped lead FA and cabless booster FB models were built. A dual passenger-freight version, the FPA/FPB, was also offered. It was equipped with a steam generator for heating passenger cars.

<span class="mw-page-title-main">GE E60</span> Locomotive class

The GE E60 is a family of six-axle 6,000 hp (4.5 MW) C-C electric locomotives made by GE Transportation Systems (GE) between 1972 and 1983. The E60s were produced in several variants for both freight and passenger use in the United States and Mexico. GE designed the locomotive for use on the Black Mesa and Lake Powell Railroad (BM&LP), a dedicated coal-hauling route in Arizona, which began operation in 1973. That same year GE adapted the design for high-speed passenger service on Amtrak's Northeast Corridor. The largest customer was Ferrocarriles Nacionales de México (NdeM), the state-owned railroad in Mexico, which bought 39 for a new electrification project in the early 1980s.

<span class="mw-page-title-main">New Zealand DX class locomotive</span> Class of 49 New Zealand diesel locomotives

The New Zealand DX class locomotive is a type of 49 Co-Co diesel-electric locomotives that currently operate on New Zealand's national railway network. All locomotives are owned by KiwiRail.

<span class="mw-page-title-main">New York Central R-Motor</span>

R-Motor was the class designation given by the New York Central one prototype and a later fleet of 42 ALCO-GE built electric freight locomotives for use in the New York Electrified Zone. In conjunction with the P Motors, the Rs marked the second generation of electric locomotives built for the New York Central. Also like the P Motors they used advanced nose suspended traction motors and the R-2s were some of the first North American locomotives to make use of the C-C wheel arrangement, which later became the standard for diesel electric road freight.

<span class="mw-page-title-main">New Haven EP-2</span>

The New Haven EP-2 was a class of boxcab electric locomotives built by Baldwin-Westinghouse for the New York, New Haven and Hartford Railroad. The locomotives worked passenger trains on the New Haven's electrified division west of New Haven, Connecticut. Baldwin-Westinghouse delivered 27 locomotives between 1919–1927. The locomotives were an enlarged version of the EP-1 and EF-1 designs. They remained in service until the arrival of the dual-mode EMD FL9 locomotives in 1958.

References