Gypsy | |
---|---|
Role | Single seat glider |
National origin | United Kingdom |
Manufacturer | The Birmingham Guild Ltd. |
Designer | L. P. Moore, J. Gibson and K. Emslie |
First flight | 7 April 1970 |
The Moore Gypsy or Birmingham Guild BG 100/12 and BG 135 is an early all-metal single-seat glider designed in the UK in the late 1960s. Several longer span variants were produced by various manufacturers. The first BG 135 was still flying in 2011.
The Moore Gypsy is a small glider, all metal apart from a GRP nose, designed by L. P. Moore, J. Gibson and K. Emslie and constructed by the Birmingham Guild Ltd. It has shoulder mounted, cost-saving [1] wings of constant chord with square tips. Though the prototype had a 12 m span wing, longer span variants were envisaged from the outset.
The wings are light alloy structures with polyurethane foam cores and 0.0124 in (315 μm) light alloy skins. Ailerons and flaps occupy the whole of the trailing edge. The Gypsy has a constant chord V-tail constructed in the same manner as the wing. [1] [2] Its fuselage behind the nose is an oval section metal monocoque with a long, smooth, bulged canopy over the single seat cockpit that rejoins the fuselage profile. There is a single, semi-protruding fixed mono wheel under the wing and a small tailwheel. [2]
The first Gypsy, the 12.0 m span BG 100/12, made its first flight from Pendeford airfield near Wolverhampton on 7 April 1970, piloted by Derek Piggott. [2] A 13.46 m (44 ft 3.5 in) span version was first flown on 30 May 1971. Known as the BG 100/13.5, it was a rebuild of the sole BG 100/12; as well as the new wings, which were fitted with extended trailing edge air brakes, it had an increased span tailplane of higher aspect ratio. [3] [4]
The first pre-production Gypsy, the BG 135, flew in March 1972. It differed from the earlier versions chiefly in its wing construction, having the foam-stabilised thin skin of the BG 100s replaced by an aluminium alloy skinned D-box leading edge, based on the main spar, and with fabric covering between main and rear spars. The best glide angle of the BG 135 is 33:1. It gained a Certificate of Airworthiness in July 1972. [4] After demonstrations at the British National Gliding Championships, held from 27 May to 4 June 1972, [4] [5] the BG 135 was loaned to several Clubs for evaluation. Following some minor modifications, production of a batch of seven was prepared. [4]
This limited production by The Birmingham Guild [6] was later taken over by Yorkshire Sailplanes as the YS 55 Consort. [7] [8] [9]
In 1975, the design was further developed as the Swales SD3-15, with a 15 m (49 ft 2.5 in) span [6] [7] [10]
At least one example has had an extended active life. The first BG 135, Certificate of Airworthiness BGA 1741, competed at the Inter-services Regional Glider Competition held at Hullavington Airfield in August 1998, [11] 26 years after its first competitive appearance. BGA 1741 was recorded at RAF Keevil in 2009. [12] In 2011 it was privately owned and based at Lasham Airfield. [13]
Data from Jane's All the World's Aircraft 1971 [1]
General characteristics
Performance
The Schleicher Ka 6 is a single-seat glider designed by Rudolf Kaiser, built by Alexander Schleicher GmbH & Co, Germany and is constructed of spruce and plywood with fabric covering. The design initially featured a conventional tailplane and elevator which was later replaced by an all-moving tailplane in the -Pe and Ka 6E variants. Variants built before the -CR and -BR used a main skid as the principal undercarriage, with later variants including the Ka 6E using a wheel as the main undercarriage with no nose skid. Other modifications for the Ka 6E include a more aerodynamic fuselage with glassfibre nose and wingroot fairings, longer canopy, and modified aluminium airbrakes.
The Briegleb BG-12 is a single-seat sailplane of wooden construction developed in the United States in the 1950s. It was marketed for homebuilding in plans or kit form, with over 350 sets of plans selling by 1978. The BG-12 is a conventional sailplane design, with a high cantilever wing and a conventional empennage. Later models featured a highly revised fuselage, a swept-forward tail fin, and an all flying tailplane with balance tabs.
The Caproni Vizzola Calif was a family of Italian sailplanes, the first example flew in 1969, with production continuing into the 1970s and 1980s. Of typical sailplane configuration with T-tails, they featured distinctive wings with centre sections of constant chord and trapezoidal outer panels. The forward fuselage was constructed of fibreglass over an alloy frame, while the rear fuselage, wings, and empennage were metal-covered.
The Schleicher ASW 17 is a single-seat Open Class sailplane that was built by the German manufacturer Alexander Schleicher GmbH & Co and first flew in 1971. It replaced the ASW 12, and was replaced in 1981 by the ASW 22.
The Slingsby T.41 Skylark 2 was a sailplane produced from 1953 by Slingsby Sailplanes at Kirkbymoorside, Yorkshire.
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Mü-27 is a research glider aircraft that designed and built in Germany in 1979. Only one example was constructed.
The CVT M-300 was a single-seat glider designed and built in Italy from 1967.
The SZD-38 Jantar 1 (Amber) is a glider designed and produced in Poland from 1971.
The Slingsby T.53 was the first all-metal sailplane designed and built in the United Kingdom. It was designed and built by Slingsby Sailplanes for evaluation by the Royal Air Force.
The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.
The Hall Ibex is an experimental, American, gull winged, single seat glider that was designed by Stan Hall and first flown in 1968.
The Slingsby T.59 Kestrel is a British Open class glider which first flew in August 1970. Of fibreglass construction, it features camber-changing flaps, airbrakes, and a retractable main wheel.
The Abbott-Baynes Scud 2 was a 1930s high-performance sailplane, built in the UK. It was a development of the intermediate-level Scud 1 with a new, high aspect ratio wing.
The Manuel Hawk was a homebuilt single-seat glider designed and constructed in the UK around 1970. Only one example was flown.
The Peak 100 was a side-by-side two-seat high performance sailplane, featuring a steel-framed fuselage, designed in the United Kingdom in the early 1960s. Only one was built.
The Penrose Pegasus was a 1930s high-wing, single-seat, wooden glider from the UK. Designed, built and flown by Harald Penrose until the start of World War II, only one was built at the time though a reproduction was constructed in the 1990s.
The Scott Viking 1 was a single seat, high-performance glider designed and built in the UK just before the Second World War. Only four were constructed, one setting records in Argentina and another remaining active into the 1980s.
The Swales SD3-15 is an all-metal single-seat glider produced and marketed in the UK in the mid to late 1970s. It was a development of the Moore Gypsy via the Yorkshire YS 55 Consort. The aircraft was intended to appeal to flying clubs and small syndicates to whom its small size, low weight, low cost, and safe flying characteristics would be appealing.