The Morane-Saulnier MoS-121, also known as the Morane-Saulnier MS.121, was a fighter prototype designed and produced by the French aircraft manufacturer Morane-Saulnier. It was the company's first fighter design after the First World War.
The MS.121 was developed in response to the launch of a state-led programme for chasseurs légers or 'light fighters' in the mid 1920s. Many of the features, such as the parasol wing and the undercarriage, largely conformed to Morane-Saulnier’s existing design practices. In order to increase lift and lower landing distances, the pilot could lower the aircraft’s ailerons mid-flight. The fuel tank could also be jettisoned if required. Mixed construction, including multiple types of wood and duralumin, were used throughout the aircraft.
During mid-1927, the sole MS.121 prototype performed its maiden flight. Although it underwent official testing, no production aircraft were ever produced. The company terminated the project in favour of other endeavours, such as the Morane-Saulnier MS.221.
Development
As a direct result of concern over the escalating cost of fighter manufacture, the French government and air force jointly instituted a programme for chasseurs légers or 'light fighters' in 1926. This was unofficially known as the 'Jockey' program, and it envisaged the use of moderate guns, minimal equipment and small amounts of ammunition. Emphasis was placed on climb rate, endurance and a ceiling (high for the time) of 8000 metres. In response to this requirement, Morane-Saulnier designed the MoS-121, renamed the MS.121 in 1927; it was intended to be primarily operated as a single-seat monoplane fighter.
The MS.121 was furnished with a parasol wing, a design featured that originated from the Morane-Saulnier during the early 1910s.[1] This wing was of uniform thickness across its whole span; its chord was similarly uniform. It had no dihedral but did feature a relatively pronounced sweepback .[1] The middle of the wing was fastened to a metal cabane and was rigidly held in position by a pair of braced struts that were positioned at either side of the fuselage.[1]
The wing was of mixed construction; the structural members comprised a pair of spars with openwork rectangular tubs. The ribs were composed of wood, the covering was largely fabric aft of the forward spar, the leading edge was covered with plywood, and the ailerons had a framework made of duralumin.[2] The ailerons, which were relatively narrow and unbalanced, ran across the entire span of the wing and were rigidly controlled via two rods. The pilot used a wheel to lower them mid-flight in order to increase the aircraft’s lift and thereby permit lower landing speeds to be used.[2]
The fuselage was mostly conventional for the era, being primarily composed of wood, except for the first two bays, which were made of metal instead.[3] The framework was braced by piano wires. The exterior of the aircraft was covered by ribbed duralumin towards the front while fabric was used for all areas aft of the pilot's cockpit, which was located well behind the wings.[3] The cockpit was large enough for the pilot to readily move about, even when equipped with a parachute. Both the seat and the rudder bar were adjustable.[3]
The MS.121 was armed with a pair of forward firing 7.7mm (0.303in)Vickers machine-guns which fired directly through the propeller arc.[3] An Optique et Précision de Levallois-supplied collimator functioned as a sight for the pilot. The horizontal empennage comprises a stabilizer (which could be adjusted mid-flight via the use of a wheel) and a two-part unbalanced elevator.[3] The vertical empennage consisted of a fin and an unbalanced rudder. All of the tail planes were composed of duralumin and covered with fabric.[3] The stabilizer was braced from beneath by a single strut as well as from above via a streamlined wire.[3]
As built, the aircraft was powered by a single Hispano-Suiza 12Jb engine, which (together with its accessories) formed a complete block and thus could be relatively quickly removed for servicing, repair, or replacement.[4] A total of four bolts were used to secure it to the framework of the fuselage. Cooling was achieved using a frontal radiator of an in-house honeycomb design, complete with regulating shutters.[5] Various precautions were in place to manage the risk of a fire in the engine bay, this included a fire extinguisher, removable fuel tank, and a fire wall.[5]
It was outfitted with a conical-shaped fuel tank, positioned directly in front of the pilot’s seat (being separately contained by a firewall comprising two sheets of metal and a single sheet of asbestos) that had a capacity of 210 liters (55.5 gallons).[5] If required, the tank could be dropped mid-flight. Fuel was supplied to the engine by a pair of disconnectable pumps.[5]
The landing gear conformed with the typical conventions of the company, such as its use of a pair of independent half-axles.[5] The struts of the landing gear were directly attached to the lower longerons of the fuselage via special pivoting joints that eliminated the danger of breaking one of the longerons if one of the struts were to buckle during a hard landing. The shock absorbers, which were located in the plane of the lateral V-shaped struts, consisted of a certain number of independent rubber loops that could be easily replaced; the entirety was fully enclosed within the covering of the front struts.[6] To facilitate ground manoeuvring, the pilot was able to control the orientation of the tail skid in a manner that was independent of the rudder. It was attached to the fuselage by two bolts.[7]
Operational history
The MS.121 prototype performed its maiden flight in mid-1927. During official testing, it demonstrated its above average ability to climb.[1] However, no production aircraft were ever produced as a result of the company having opted to cease its work on the project in favour of a more capable fighter in the form of the Morane-Saulnier MS.221.
Specifications (MoS-121)
Morane-Saulnier MS.121 3-view drawing from L'Aéronautique June,1928
Data fromJane's all the World's Aircraft 1928,[8]The Complete Book of Fighters[9]
The Morane-Saulnier M.S.406 is a French fighter aircraft developed and manufactured by Morane-Saulnier starting in 1938. It was France's most numerous fighter during the Second World War and one of only two French designs to exceed 1,000 in number. At the beginning of the war, it was one of only two French-built aircraft capable of 400 km/h (250 mph) – the other being the Potez 630.
The Armstrong Whitworth A.W.16 was a single-engine biplane fighter aircraft designed and built by the British aircraft manufacturer Armstrong Whitworth Aircraft.
The Hanriot H.43 was a military utility biplane designed and produced by the French aircraft manufacturer Hanriot. It was primarily used by the Aéronautique Militaire as a trainer aircraft during the interwar period.
The Morane-Saulnier AI is a French parasol-wing fighter aircraft that was produced by Morane-Saulnier during World War I.
The Lioré et Olivier LeO 12 was a large biplane designed and produced by the French aircraft manufacturer Lioré et Olivier. Designed for use as a night bomber, it was adapted to other roles, including that of a civilian airliner, following a lack of interest from the French Air Force.
The Westland Wizard was Westland Aircraft's first attempt to produce a monoplane fighter. The project was privately funded and the prototype design was done in the spare time of the company's engineers. This all happened during 1926, with high-speed performance as the primary goal.
The Villiers II was a twin-seat navalised fighter aircraft designed and produced by the French aircraft manufacturer Ateliers d'Aviation François Villiers.
The Bernard 20 was a single-seat monoplane fighter aircraft designed and built by the French aircraft manufacturer Société des Avions Bernard.
The Morane-Saulnier MS.180 is a single engine parasol wing aerobatic trainer aircraft that was designed and produced by the French aircraft manufacturer Morane-Saulnier.
The SABCA S.11 or SABCA S.XI was a prototype Belgian airliner designed and produced by the Belgian aircraft manufacturer Sociétés Anonyme Belge de Constructions Aéronautiques (SABCA). It was a three-engined high-winged monoplane intended for service in the Belgian Congo, but only a single example was built.
The Nieuport-Delage NiD 48 was a single-engine parasol wing light fighter aircraft designed and produced by the French aircraft manufacturer Nieuport-Delage.
The Lioré et Olivier LeO 8, Lioré et Olivier LeO 8-Cau 2 or Lioré et Olivier LeO 8 CAN 2 was a French two seat, parasol wing monoplane night fighter and reconnaissance aircraft, built in 1923.
The Blériot-SPAD S.91 was a light-weight fighter aircraft by the French aircraft manufacturer Blériot.
The Les Mureaux 3 C.2 and Les Mureaux 4 C.2 were French two seat, parasol winged fighters, flown in 1927-8, which differed only in their engines. They were developed into near identical army co-operation types, the ANF Les Mureaux 130 A.2 and ANF Les Mureaux 131 A.2, in 1929–31.
The Villiers XXIV or Villiers 24 CAN2 was a French army night fighter most notable as the first French military aircraft to be fitted with leading edge slats.
The Villiers V, Villiers 5 or Villiers 5CN2 was a French night fighter built in the mid-1920s. It did not go into production.
The Morane-Saulnier MS.350 was a French aerobatic trainer flown in 1936. Only one was built but it had a long career, flying post-war until the 1960s.
The Morane-Saulnier MS.300 and MS.301 were French parasol wing introductory trainer aircraft, first flown in 1930. They differed only in engine type. Neither reached production but were developed into two similar trainers, the MS.230 and MS.315, which were made in large numbers.
The Morane-Saulnier MS.152 was a French multi-purpose aircraft built in 1928. It did not go into production.
The Morane-Saulnier MS.221 was a French fighter aircraft, built in 1928 to compete for a government contract in the "Jockey" programme. Two were built, one of which was progressively modified to increase its speed, but in 1930 the light fighter concept was abandoned.
Lacaze, Henri & Lherbert, Claude (2013). Morane Saulnier: ses avions, ses projets[Morane Saulnier: Their Aircraft and Projects] (in French). Outreau, France: Lela Presse. ISBN978-2-914017-70-1.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
