Paresev | |
---|---|
General information | |
Type | Flexible-wing research glider |
Manufacturer | NASA |
History | |
First flight | 1962 |
The NASA Paresev ("Paraglider Research Vehicle") was an experimental NASA glider aircraft based upon the kite-parachute studies by NASA engineer Francis Rogallo.
Between 1961 and 1965 the ability of the Rogallo wing (also called "Parawing") to descend a payload such as the Gemini space capsule safely from high altitude to ground was studied. [1] [2] The Paresev was a test vehicle used to learn how to control this parachute-wing for a safe landing at a normal airfield.
Publicity on the Paresev and the Ryan XV-8 "Flying Jeep" aircraft inspired hobbyists to adapt Rogallo's flexible wing airfoil onto elementary hang gliders leading to the most successful hang glider configuration in history.
NASA experimented with the flexible Rogallo wing, which they renamed the Parawing, in order to evaluate it as a recovery system for the Gemini space capsules and recovery of used Saturn rocket stages. [3] [4] Under a directive by Paul Bikle, NASA engineer Charles Richard in 1961–1962 designed the collapsible four-tube Rogallo wing used in the Paresev. The Paresev series included wing configurations that were tightly foldable from the nose plate for easy transport, using initially a cloth sail and later one of Dacron. The evaluations conducted at the NASA Flight Research Center, in conjunction with the aerodynamic investigations in wind tunnels, produced favorable results. However, subsequent testing revealed that achieving precise control over the responsiveness of the glider would be too difficult. [5]
Data developed by NASA in the late 1950s fed both the Charles Richard team and a different Ryan Aeronautical team that produced the Fleep. The Paresev used a cantilevered cross-beam but did not use a kingpost. [6]
Note that the "paraglider" involved in the early 1960s experiments is a different airfoil concept used today in paragliding.
The Paresev 1A and 1B were unpowered; the "fuselage" was an open framework fabricated of welded SAE 4130 steel tubing, called a "space frame". The keel and leading edges of the wing were constructed of 2.5-inch-diameter (64 mm) aluminium tubing. The leading edge sweepback angle was held at 50 degrees by a rigid spreader bar. Additional wing structure fabricated from steel tubing ensured structural integrity.
The basic vehicle was slightly more than 11 ft (3.4 m) high from the top of the paraglider's wing to the ground, while the length of the center keel was 15 ft (4.6 m). Total weight was about 600 lb (270 kg) [7] On August 24, 1962, seven weeks after the project was initiated, the team rolled out the Paresev 1. [8]
The Paresev was controlled by moving the tensionally hung pilot's and fuselage's mass relative to the position of the wing. This mass-shifting was effected by tilting the wing from side to side and fore and aft by using a control stick in front of the pilot that descended from the wing above. Another version translated the same weight-shift control via cables. [1] As the Paresev was towed in a kite mode, it usually rose from the ground at about 46 mph (74 km/h) and had a maximum air speed of about 65 mph (105 km/h). [9]
The Paresev control pendulum weight-shift control system was presaged by a published patent, [10] an early use of the hung pilot behind a cable-stayed triangle control bar in 1908 in the territory of Breslau, [11] and then also by the "control wing" of George Spratt in the 1920s. [12]
Paresev flight log (NOTE – This log is incomplete*): Paresev Flight Log
* The Paresev vehicle was flown 341 times. Thompson made numerous ground-tow flights and claimed about 60 air-tow flights. Peterson claimed 228 flights (ground and air tows). Grissom made two flights. Champine made four flights. Kleuver made at least eight flights. It is unknown how many times Armstrong, Hetzel, and Slayton flew.
The Paresev completed nearly 350 flights during a research program that ran from 1962 until 1964. [14] [15] Using the fully flexible parawing or the tube-stiffened paraglider of the Paresev 1A, 1B, 1C as an alternate to spacecraft recovery was deemed too unreliable upon unfolding so round parachutes for water landings were used instead. The Paresev and other flexible-wing projects such as the Ryan XV-8 stopped being funded by NASA on 1965. Although Rogallo wrote about, modeled, and spoke about recreational applications including hang gliding, NASA was not in the business of applying Rogallo's family of airfoils to personal aircraft such as kites, hang gliders, and powered light aircraft.
The Paresev was transferred to the Smithsonian National Air and Space Museum located in Washington, D.C. for display.
Data from[ citation needed ]
General characteristics
Performance
Hang gliding is an air sport or recreational activity in which a pilot flies a light, non-motorised, heavier-than-air aircraft called a hang glider. Most modern hang gliders are made of an aluminium alloy or composite frame covered with synthetic sailcloth to form a wing. Typically the pilot is in a harness suspended from the airframe, and controls the aircraft by shifting body weight in opposition to a control frame.
A wing is a type of fin that produces lift while moving through air or some other fluid. Accordingly, wings have streamlined cross-sections that are subject to aerodynamic forces and act as airfoils. A wing's aerodynamic efficiency is expressed as its lift-to-drag ratio. The lift a wing generates at a given speed and angle of attack can be one to two orders of magnitude greater than the total drag on the wing. A high lift-to-drag ratio requires a significantly smaller thrust to propel the wings through the air at sufficient lift.
Unpowered aircraft can remain airborne for a significant period of time without onboard propulsion. They can be classified as gliders, lighter-than-air balloons and tethered kites. In the case of kites, lift is obtained by tethering to a fixed or moving object, perhaps another kite, to obtain a flow of wind over the lifting surfaces. In the case of balloons, lift is obtained through inherent buoyancy and the balloon may or may not be tethered. Free balloon flight has little directional control. Gliding aircraft include sailplanes, hang gliders, and paragliders that have full directional control in free flight.
A fixed-wing aircraft is a heavier-than-air aircraft, such as an airplane, which is capable of flight using aerodynamic lift. Fixed-wing aircraft are distinct from rotary-wing aircraft, and ornithopters. The wings of a fixed-wing aircraft are not necessarily rigid; kites, hang gliders, variable-sweep wing aircraft, and airplanes that use wing morphing are all classified as fixed wing.
The Rogallo wing is a flexible type of wing. In 1948, Francis Rogallo, a NASA engineer, and his wife Gertrude Rogallo, invented a self-inflating flexible wing they called the Parawing, also known after them as the "Rogallo Wing" and flexible wing. NASA considered Rogallo's flexible wing as an alternative recovery system for the Mercury and Gemini space capsules, and for possible use in other spacecraft landings, but the idea was dropped from Gemini in 1964 in favor of conventional parachutes.
Francis Melvin Rogallo was an American aeronautical engineer inventor born in Sanger, California, U.S. Together with his wife, he is credited with the invention of the Rogallo wing, or "flexible wing", a precursor to the modern hang glider and paraglider. His patents were ranged over mechanical utility patents and ornamental design patents for wing controls, airfoils, target kite, flexible wing, and advanced configurations for flexible wing vehicles.
Kite types, kite mooring, and kite applications result in a variety of kite control systems. Contemporary manufacturers, kite athletes, kite pilots, scientists, and engineers are expanding the possibilities.
Taras Kiceniuk Jr. is a hang glider pioneer from southern California.
An ultralight trike or paratrike is a type of powered hang glider where flight control is by weight-shift. These aircraft have a fabric flex-wing from which is suspended a tricycle fuselage pod driven by a pusher propeller. The pod accommodates either a solo pilot, or a pilot and a single passenger. Trikes grant affordable, accessible, and exciting flying, and have been popular since the 1980s.
Hang gliding is an air sport employing a foot-launchable aircraft. Typically, a modern hang glider is constructed of an aluminium alloy or composite-framed fabric wing. The pilot is ensconced in a harness suspended from the airframe, and exercises control by shifting body weight in opposition to a control frame.
A foot-launched powered hang glider (FLPHG), also called powered harness, nanolight, or hangmotor, is a powered hang glider harness with a motor and propeller often in pusher configuration, although some can be found in tractor configuration. An ordinary hang glider is used for its wing and control frame, and the pilot can foot-launch from a hill or from flat ground, needing a length of about a football field to get airborne, or much less if there is an oncoming breeze and no obstacles.
Paul F. Bikle was director of the U.S. National Aeronautics and Space Administration (NASA) Dryden Flight Research Facility from 1959 until 1971, and author of more than 40 technical publications. He was associated with major aeronautical research programs including the hypersonic X-15 rocket plane, and was a world record-setting glider pilot.
The Ryan XV-8 Flexible Wing Aerial Utility Vehicle was an improved version of the Flex-Wing. Both aircraft were built by Ryan Aeronautical Company in collaboration with NASA for the United States Air Force and the United States Army and tested in 1961 as a STOL patrol, reconnaissance, and light utility aircraft to transport people or freight when a more specialized aircraft is not required or available.
A glider is a fixed-wing aircraft that is supported in flight by the dynamic reaction of the air against its lifting surfaces, and whose free flight does not depend on an engine. Most gliders do not have an engine, although motor-gliders have small engines for extending their flight when necessary by sustaining the altitude with some being powerful enough to take off by self-launch.
Barry Hill Palmer is an American aeronautical engineer, inventor, builder and pilot of the first hang glider based on the Rogallo wing or flexible wing. Palmer also designed, built and flew the first weight-shift ultralight trike aircraft.
The Flight Dynamics Flightsail VII was a recreational aircraft marketed in the United States in the 1970s for homebuilding by Flight Dynamics, Inc., most unusual both in its design and its method of construction. The Flightsail VII was intended to be built in three stages, with each stage representing a flyable aircraft of increasing complexity, capability, and cost. It was hoped that this approach would appeal to homebuilders by minimizing the amount of time and money required to take the aircraft to a point where it could be flown.
John Wallace Dickenson was an Australian inventor, who developed some liquid flow measuring devices and designed a successful hang glider configuration, for which he was awarded the Gold Air Medal, the highest award given by the Fédération Aéronautique Internationale, the world governing body for air sports, aeronautics and astronautics world records.
In aeronautics, a flexible wing is an airfoil or aircraft wing which can deform in flight.
Charles Richard was a design engineer, who designed the collapsible four-tube Rogallo wing used in the experimental NASA Paresev glider. The wing configuration he created was used for manned hung-pilot kite-gliders and was to be found copied only with slight ornamental variation in a decade of hang gliders. Richards was of the Flight Research Center's Vehicle and System Dynamics Branch. The four-beamed wing folded from the nose plate; one of the beams was the spreader beam that kept the flexible-wing's sweep. Those in the following decade copying the Charles Richard wing configuration expanded kiting, hang gliding, ultralight, and trike flight.
The Purcell Flightsail or Flight Dynamics Flightsail is an experimental towed glider by Thomas H. Purcell, Jr. He sold plans in several publications for the tow-launched hung-mass controllable kite-glider. He flew first off water in late 1961 and then arranged things for off-land and landing on land. His efforts would find similarity echo later in early 1963 by the SkiPlane of Mike Burns.