| NZR H199 Mount Cenis | |||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 H199 in the Fell Engine Museum | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
NZR H199 Mount Cenis is a preserved NZR H class 0-4-2T steam locomotive. It is the only surviving rack locomotive in New Zealand and the only surviving steam locomotive to use the fell rack system in the world. The locomotive is preserved at the Fell Engine Museum in Featherston.
H199 was built in 1875 as the first of four Avonside built locomotives made for the at the time under construction Rimutaka Incline. H199 along with the other three were designated as the H class and introduced to the line in 1877 due to construction delays and issues and were later joined by two Neilson built locomotives in 1886. All members of the H class were named after mountains, with H199 being Mount Cenis after the mountain that had the first fell rack railway. After the opening of the Rimutaka Tunnel in 1955 H199, along with the five other members of the H class was withdrawn and retired in 1956 after the closure of the Rimutaka Incline. [1]
H199 was donated to Featherston three years later in 1958. It was placed in a park at Clifford Square where it remained part of a children's playground until 1981 when the newly formed Friends of the Fell Society moved it for static restoration due to deterioration. Three years later in 1984, the Fell Engine Museum was constructed to house H199 adjacent to the playground. The locomotive's restoration was completed in 1989 and was later joined by a fell brake van in 1997. Although on static display, H199 is mounted on rollers powered by electric motors to allow people to see how its moving parts work. [2]
Railway preservation in New Zealand is the preservation of historically significant facets of New Zealand's rail transport history. The earliest recorded preservation attempt took place in 1925, although the movement itself did not start properly until 1960.
The Rimutaka Incline was a 3-mile-long (4.8 km), 3 ft 6 in gauge railway line on an average grade of 1-in-15 using the Fell system between Summit and Cross Creek stations on the Wairarapa side of the original Wairarapa Line in the Wairarapa district of New Zealand. The term "Rimutaka Incline" is sometimes used incorrectly to refer to other parts or all of the closed and deviated section of the Wairarapa Line between Upper Hutt and Speedy's Crossing, near Featherston. The incline formation is now part of the Remutaka Rail Trail.
The Fell system was the first third-rail system for railways that were too steep to be worked by adhesion on the two running rails alone. It used a raised centre rail between the two running rails to provide extra traction and braking, or braking alone. Trains were propelled by wheels horizontally applied and retracted by springs onto the centre rail, controlled from the cab, as well as by the normal running wheels. In practice, the running wheels could be allowed to run freely to reduce wear, but the centre brake shoes needed to be replaced frequently. For example: the locomotives' shoes were replaced after each journey on the Mont Cenis Pass Railway. Extra brake shoes were fitted to specially designed or adapted Fell locomotives and brake vans, and for traction the prototype locomotive had an auxiliary engine powering the horizontal wheels. The Fell system was developed in the 1860s and was soon superseded by various types of rack railway for new lines, but some Fell systems remained in use into the 1960s. The Snaefell Mountain Railway still uses the Fell system for (emergency) braking, but not for traction.
The NZR A class of 1873 consisted of three types of steam locomotives used on New Zealand's railway network of similar specification but differing detail. The first and most numerous were from the Dübs and Company, the next from the Wellington firm E.W. Mills Lion Foundry, and the last from the Scottish firm of Shanks. The specifications are for the Dubs Yorkshire engines.
The NZR A class were a class of steam locomotives built in 1906 with a 4-6-2 wheel arrangement for the New Zealand Railways Department (NZR). The class should not be confused with the older and more obscure A class of 1873. They were designed by the NZR's Chief Mechanical Engineer, A. L. Beattie and his Chief Draughtsman, G. A. Pearson to replace less powerful locomotives struggling with increasing loads on the South Island Main Trunk Railway, and in anticipation of the traffic volumes that would be created upon the completion of the North Island Main Trunk railway.
The NZR WB class was a class of tank locomotives that operated in New Zealand. Built in 1898 by the Baldwin Locomotive Works, the twelve members of the class entered service during the first five months of 1899. Eight were withdrawn by the end of 1935, while four others survived with new boilers until the mid-1950s.
The NZR WD class was a class of tank locomotive built by Baldwin Locomotive Works to operate on New Zealand's national rail network.
The NZR O class consisted of six steam locomotives that operated on New Zealand's national rail network. Ordered from the Baldwin Locomotive Works of Pennsylvania in 1885, three arrived in time to begin work in December 1885, while two more were placed in service in January 1886 and the sixth in February 1886. After almost four decades of service, all six were withdrawn in May 1922. None survived to be preserved, although two engine frames and 5 tenders from O class locomotives are known to exist near Summit on the former Rimutaka Incline.
The NZR NA class was a class of two steam locomotives that operated on the privately owned Wellington and Manawatu Railway (WMR) and then the publicly owned New Zealand Railways (NZR). Ordered by the WMR to operate on its line up the west coast of the North Island north of Wellington, the first was built in 1894 by the Baldwin Locomotive Works and entered service that year as WMR No. 14. In 1896, a second locomotive that was slightly more powerful was ordered from Baldwin, and it entered service in October 1897. The engines were similar to the two members of the N class ordered in 1891, except they were heavier and more powerful. They were Vauclain compound locomotives.
The NZR NC class was a class of two steam locomotives built by Baldwin Locomotive Works built for service on New Zealand's private Wellington and Manawatu Railway (WMR). They did not acquire their NC classification until the publicly owned New Zealand Railways Department (NZR) purchased the WMR and its locomotive fleet.
The OC class, built by the Baldwin Locomotive Works for the Wellington and Manawatu Railway (WMR) in New Zealand, consists of a solitary steam locomotive. Ordered in 1896 as an externally similar but more powerful version of the OA class locomotive ordered in 1894, it entered service in June 1897 as No. 16. It was a Vauclain compound locomotive.
The New Zealand E class locomotive comprised a single Mallet steam locomotive operated by New Zealand Railways (NZR) from 1906 until 1917. Classified as E 66 and nicknamed Pearson's Dream after its designer, it was an experimental Mallet locomotive designed to work on the Rimutaka Incline. The "E" classification was previously used by the Double Fairlie E class of 1872-75, but the classification was free as they had all been withdrawn by the time E 66 entered service. After the withdrawal of E 66, "E" was again re-used on the battery-electric E class of 1922. It was the only Mallet locomotive to operate for the NZR
The NZR H class steam locomotive is a unique class of Fell locomotive used by New Zealand Railways (NZR) on the Rimutaka Incline, the 3-mile (4.8 km) section of 1 in 15 gradient between Cross Creek and Summit, over the Rimutaka Ranges.
The Fell Locomotive Museum in Featherston, New Zealand, exhibits the only remaining steam-powered Fell railway locomotive in the world.
The NZR W class consisted of two steam locomotives built at the Addington Railway Workshops in Christchurch, New Zealand by the New Zealand Railways Department (NZR). They were the first locomotives to be built by NZR.
The Rimutaka Incline Railway Heritage Trust is a non-profit, charitable trust in New Zealand that was established in 2003 with the objective of reinstating an operating heritage railway over the Remutaka Ranges using the original route of the Wairarapa Line between Maymorn and Featherston, including the world-famous Rimutaka Incline.
The NZR WA class locomotives were a class of tank locomotive built by New Zealand Railways (NZR). Eleven were built at NZR's own Addington Workshops in Christchurch and Hillside Workshops in Dunedin. Four more were converted from old J class 2-6-0 locomotives.
The NZR WE Class were rebuilt from earlier Sharp Stewart built B class locomotives. In service, the first two were tried on the Rimutaka Incline, however, they lacked the required adhesion on the 1 in 15 (6.67%) grade. They were later transferred to Greymouth for use on the Rewanui Incline, where they were far more successful, on the line's 1 in 25 (4%) grade. It is not known if they ever operated on the Roa Incline.
The NZR WG class was a development of the preceding WF class of all purpose tank locomotive. Later in their careers most (14) were rebuilt as WW class. The locomotives were designed by A. L. Beattie, who described them as a "large tank locomotive."
The NZR WW class was a class of 4-6-4T tank locomotives that operated on the New Zealand national railway network. They were built for New Zealand Railways Department (NZR), and were the final development of the six-coupled tank engine in New Zealand, the penultimate class of tank locomotives to be built for NZR, and the first class of tank locomotives to be built with superheaters.