Nonlinear acoustics

Last updated
Nonlinearity in ultrasonic wave propagation through tissue at larger amplitudes Nonlinear US wave propagation.svg
Nonlinearity in ultrasonic wave propagation through tissue at larger amplitudes

Nonlinear acoustics (NLA) is a branch of physics and acoustics dealing with sound waves of sufficiently large amplitudes. Large amplitudes require using full systems of governing equations of fluid dynamics (for sound waves in liquids and gases) and elasticity (for sound waves in solids). These equations are generally nonlinear, and their traditional linearization is no longer possible. The solutions of these equations show that, due to the effects of nonlinearity, sound waves are being distorted as they travel.

Contents

Introduction

A sound wave propagates through a material as a localized pressure change. Increasing the pressure of a gas or fluid increases its local temperature. The local speed of sound in a compressible material increases with temperature; as a result, the wave travels faster during the high pressure phase of the oscillation than during the lower pressure phase. This affects the wave's frequency structure; for example, in an initially plain sinusoidal wave of a single frequency, the peaks of the wave travel faster than the troughs, and the pulse becomes cumulatively more like a sawtooth wave. In other words, the wave distorts itself. In doing so, other frequency components are introduced, which can be described by the Fourier series. This phenomenon is characteristic of a nonlinear system, since a linear acoustic system responds only to the driving frequency. This always occurs but the effects of geometric spreading and of absorption usually overcome the self-distortion, so linear behavior usually prevails and nonlinear acoustic propagation occurs only for very large amplitudes and only near the source.

Additionally, waves of different amplitudes will generate different pressure gradients, contributing to the nonlinear effect.

Physical analysis

The pressure changes within a medium cause the wave energy to transfer to higher harmonics. Since attenuation generally increases with frequency, a countereffect exists that changes the nature of the nonlinear effect over distance. To describe their level of nonlinearity, materials can be given a nonlinearity parameter, . The values of and are the coefficients of the first and second order terms of the Taylor series expansion of the equation relating the material's pressure to its density. The Taylor series has more terms, and hence more coefficients (C, D, ...) but they are seldom used. Typical values for the nonlinearity parameter in biological mediums are shown in the following table. [1]

Material
Blood6.1
Brain6.6
Fat10
Liver6.8
Muscle7.4
Water5.2
Monatomic Gas0.67

In a liquid usually a modified coefficient is used known as .

Mathematical model

Governing equations to derive Westervelt equation

Continuity:

Conservation of momentum:

with Taylor perturbation expansion on density:

where ε is a small parameter, i.e. the perturbation parameter, the equation of state becomes:

If the second term in the Taylor expansion of pressure is dropped, the viscous wave equation can be derived. If it is kept, the nonlinear term in pressure appears in the Westervelt equation.

Westervelt equation

The general wave equation that accounts for nonlinearity up to the second-order is given by the Westervelt equation [2]

where is the sound pressure, is the small signal sound speed, is the sound diffusivity, is the nonlinearity coefficient and is the ambient density.

The sound diffusivity is given by

where is the shear viscosity, the bulk viscosity, the thermal conductivity, and the specific heat at constant volume and pressure respectively.

Burgers' equation

The Westervelt equation can be simplified to take a one-dimensional form with an assumption of strictly forward propagating waves and the use of a coordinate transformation to a retarded time frame: [3]

where is retarded time. This corresponds to a viscous Burgers equation:

in the pressure field (y=p), with a mathematical "time variable":

and with a "space variable":

and a negative diffusion coefficient:

.

The Burgers' equation is the simplest equation that describes the combined effects of nonlinearity and losses on the propagation of progressive waves.

KZK equation

An augmentation to the Burgers equation that accounts for the combined effects of nonlinearity, diffraction, and absorption in directional sound beams is described by the Khokhlov–Zabolotskaya–Kuznetsov (KZK) equation, named after Rem Khokhlov, Evgenia Zabolotskaya, and V. P. Kuznetsov. [4] Solutions to this equation are generally used to model nonlinear acoustics.

If the axis is in the direction of the sound beam path and the plane is perpendicular to that, the KZK equation can be written [5]

The equation can be solved for a particular system using a finite difference scheme. Such solutions show how the sound beam distorts as it passes through a nonlinear medium.

Common occurrences

Sonic boom

The nonlinear behavior of the atmosphere leads to change of the wave shape in a sonic boom. Generally, this makes the boom more 'sharp' or sudden, as the high-amplitude peak moves to the wavefront.

Acoustic levitation

Acoustic levitation would not be possible without nonlinear acoustic phenomena. [6] The nonlinear effects are particularly evident due to the high-powered acoustic waves involved.

Ultrasonic waves

Because of their relatively high amplitude to wavelength ratio, ultrasonic waves commonly display nonlinear propagation behavior. For example, nonlinear acoustics is a field of interest for medical ultrasonography because it can be exploited to produce better image quality.

Musical acoustics

The physical behavior of musical acoustics is mainly nonlinear. Attempts are made to model their sound generation from physical modeling synthesis, emulating their sound from measurements of their nonlinearity. [7]

Parametric arrays

A parametric array is a nonlinear transduction mechanism that generates narrow, nearly side lobe-free beams of low frequency sound, through the mixing and interaction of high-frequency sound waves. Applications are e.g. in underwater acoustics and audio.

See also

Related Research Articles

<span class="mw-page-title-main">Navier–Stokes equations</span> Equations describing the motion of viscous fluid substances

The Navier–Stokes equations are partial differential equations which describe the motion of viscous fluid substances. They were named after French engineer and physicist Claude-Louis Navier and the Irish physicist and mathematician George Gabriel Stokes. They were developed over several decades of progressively building the theories, from 1822 (Navier) to 1842–1850 (Stokes).

In the mathematical field of differential geometry, the Riemann curvature tensor or Riemann–Christoffel tensor is the most common way used to express the curvature of Riemannian manifolds. It assigns a tensor to each point of a Riemannian manifold. It is a local invariant of Riemannian metrics which measures the failure of the second covariant derivatives to commute. A Riemannian manifold has zero curvature if and only if it is flat, i.e. locally isometric to the Euclidean space. The curvature tensor can also be defined for any pseudo-Riemannian manifold, or indeed any manifold equipped with an affine connection.

In mathematics, the Laplace operator or Laplacian is a differential operator given by the divergence of the gradient of a scalar function on Euclidean space. It is usually denoted by the symbols , (where is the nabla operator), or . In a Cartesian coordinate system, the Laplacian is given by the sum of second partial derivatives of the function with respect to each independent variable. In other coordinate systems, such as cylindrical and spherical coordinates, the Laplacian also has a useful form. Informally, the Laplacian Δf (p) of a function f at a point p measures by how much the average value of f over small spheres or balls centered at p deviates from f (p).

Linear elasticity is a mathematical model of how solid objects deform and become internally stressed due to prescribed loading conditions. It is a simplification of the more general nonlinear theory of elasticity and a branch of continuum mechanics.

<span class="mw-page-title-main">Euler equations (fluid dynamics)</span> Set of quasilinear hyperbolic equations governing adiabatic and inviscid flow

In fluid dynamics, the Euler equations are a set of quasilinear partial differential equations governing adiabatic and inviscid flow. They are named after Leonhard Euler. In particular, they correspond to the Navier–Stokes equations with zero viscosity and zero thermal conductivity.

In physics, the Hamilton–Jacobi equation, named after William Rowan Hamilton and Carl Gustav Jacob Jacobi, is an alternative formulation of classical mechanics, equivalent to other formulations such as Newton's laws of motion, Lagrangian mechanics and Hamiltonian mechanics.

<span class="mw-page-title-main">String vibration</span> A wave

A vibration in a string is a wave. Resonance causes a vibrating string to produce a sound with constant frequency, i.e. constant pitch. If the length or tension of the string is correctly adjusted, the sound produced is a musical tone. Vibrating strings are the basis of string instruments such as guitars, cellos, and pianos.

In mathematics, the Helmholtz equation is the eigenvalue problem for the Laplace operator. It corresponds to the linear partial differential equation

<span class="mw-page-title-main">Large eddy simulation</span>

Large eddy simulation (LES) is a mathematical model for turbulence used in computational fluid dynamics. It was initially proposed in 1963 by Joseph Smagorinsky to simulate atmospheric air currents, and first explored by Deardorff (1970). LES is currently applied in a wide variety of engineering applications, including combustion, acoustics, and simulations of the atmospheric boundary layer.

In differential geometry, the four-gradient is the four-vector analogue of the gradient from vector calculus.

<span class="mw-page-title-main">S wave</span> Type of elastic body wave

In seismology and other areas involving elastic waves, S waves, secondary waves, or shear waves are a type of elastic wave and are one of the two main types of elastic body waves, so named because they move through the body of an object, unlike surface waves.

Aeroacoustics is a branch of acoustics that studies noise generation via either turbulent fluid motion or aerodynamic forces interacting with surfaces. Noise generation can also be associated with periodically varying flows. A notable example of this phenomenon is the Aeolian tones produced by wind blowing over fixed objects.

In physics and fluid mechanics, a Blasius boundary layer describes the steady two-dimensional laminar boundary layer that forms on a semi-infinite plate which is held parallel to a constant unidirectional flow. Falkner and Skan later generalized Blasius' solution to wedge flow, i.e. flows in which the plate is not parallel to the flow.

<span class="mw-page-title-main">Covariant formulation of classical electromagnetism</span> Ways of writing certain laws of physics

The covariant formulation of classical electromagnetism refers to ways of writing the laws of classical electromagnetism in a form that is manifestly invariant under Lorentz transformations, in the formalism of special relativity using rectilinear inertial coordinate systems. These expressions both make it simple to prove that the laws of classical electromagnetism take the same form in any inertial coordinate system, and also provide a way to translate the fields and forces from one frame to another. However, this is not as general as Maxwell's equations in curved spacetime or non-rectilinear coordinate systems.

<span class="mw-page-title-main">Lattice Boltzmann methods</span> Class of computational fluid dynamics methods

The lattice Boltzmann methods (LBM), originated from the lattice gas automata (LGA) method (Hardy-Pomeau-Pazzis and Frisch-Hasslacher-Pomeau models), is a class of computational fluid dynamics (CFD) methods for fluid simulation. Instead of solving the Navier–Stokes equations directly, a fluid density on a lattice is simulated with streaming and collision (relaxation) processes. The method is versatile as the model fluid can straightforwardly be made to mimic common fluid behaviour like vapour/liquid coexistence, and so fluid systems such as liquid droplets can be simulated. Also, fluids in complex environments such as porous media can be straightforwardly simulated, whereas with complex boundaries other CFD methods can be hard to work with.

The Newman–Penrose (NP) formalism is a set of notation developed by Ezra T. Newman and Roger Penrose for general relativity (GR). Their notation is an effort to treat general relativity in terms of spinor notation, which introduces complex forms of the usual variables used in GR. The NP formalism is itself a special case of the tetrad formalism, where the tensors of the theory are projected onto a complete vector basis at each point in spacetime. Usually this vector basis is chosen to reflect some symmetry of the spacetime, leading to simplified expressions for physical observables. In the case of the NP formalism, the vector basis chosen is a null tetrad: a set of four null vectors—two real, and a complex-conjugate pair. The two real members often asymptotically point radially inward and radially outward, and the formalism is well adapted to treatment of the propagation of radiation in curved spacetime. The Weyl scalars, derived from the Weyl tensor, are often used. In particular, it can be shown that one of these scalars— in the appropriate frame—encodes the outgoing gravitational radiation of an asymptotically flat system.

The intent of this article is to highlight the important points of the derivation of the Navier–Stokes equations as well as its application and formulation for different families of fluids.

The Cauchy momentum equation is a vector partial differential equation put forth by Cauchy that describes the non-relativistic momentum transport in any continuum.

<span class="mw-page-title-main">Radiation stress</span> Term in physical oceanography

In fluid dynamics, the radiation stress is the depth-integrated – and thereafter phase-averaged – excess momentum flux caused by the presence of the surface gravity waves, which is exerted on the mean flow. The radiation stresses behave as a second-order tensor.

Acoustic tweezers are a set of tools that use sound waves to manipulate the position and movement of very small objects. Strictly speaking, only a single-beam based configuration can be called acoustical tweezers. However, the broad concept of acoustical tweezers involves two configurations of beams: single beam and standing waves. The technology works by controlling the position of acoustic pressure nodes that draw objects to specific locations of a standing acoustic field. The target object must be considerably smaller than the wavelength of sound used, and the technology is typically used to manipulate microscopic particles.

References

  1. Wells, P. N. T. (1999). "Ultrasonic imaging of the human body". Reports on Progress in Physics. 62 (5): 671–722. Bibcode:1999RPPh...62..671W. doi:10.1088/0034-4885/62/5/201. S2CID   250909449.
  2. Hamilton, M.F.; Blackstock, D.T. (1998). Nonlinear Acoustics. Academic Press. p. 55. ISBN   0-12-321860-8.
  3. Hamilton, M.F.; Blackstock, D.T. (1998). Nonlinear Acoustics. Academic Press. p. 57. ISBN   0-12-321860-8.
  4. Anna Rozanova-Pierrat. "Mathematical analysis of Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation" (PDF). HAL (open archive) . Laboratoire Jacques-Louis Lions, Université Pierre et Marie Curie. Retrieved 2008-11-10.
  5. V. F. Humphrey. "Nonlinear Propagation for Medical Imaging" (PDF). World Congress on Ultrasonics 2003. Department of Physics, University of Bath, Bath, UK. Retrieved 2020-09-11.
  6. "How Acoustic Levitation Works". HowStuffWorks. February 6, 2007.
  7. Tronchin, Lamberto (2012). "The Emulation of Nonlinear Time-Invariant Audio Systems with Memory by Means of Volterra Series". JAES. 60 (12): 984–996.