N.T.2B | |
---|---|
Norwegian N.T.2B with semi-enclosed cockpit at Oslo. | |
Role | Flying boat trainer |
Manufacturer | Norman Thompson Flight Company |
Designer | Francis Percy Beadle |
First flight | 1917 |
Introduction | 1917 |
Primary user | Royal Naval Air Service |
Developed from | White and Thompson No. 3 |
The Norman Thompson N.T.2B was a British single-engined flying boat trainer of the First World War. A single-engined biplane, the N.T.2B was adopted as a standard flying boat trainer by the Royal Naval Air Service, training pilots for larger patrol flying boats such as the Felixstowe F.2.
In late 1916, the Norman Thompson Flight Company, who had previously built 20 FBA Type B flying boat trainers, proposed to design and build a new trainer for pilots needed for large patrol flying boats such as the Curtiss Americas, Felixstowe F.2, and Norman Thompson's own N.T.4. The British Admiralty accepted the Norman Thompson proposal, and placed an order for 10 aircraft in November 1916 for the Royal Naval Air Service (RNAS). [1]
The resulting aircraft, designated N.T.2B, was a single-engined pusher biplane, with unequal span two-bay wings and powered by a 160 hp (119 kW) Beardmore 160 hp engine mounted between the wings driving a four-bladed propeller. The trainee pilot and instructor sat side by side in an enclosed cockpit, fitted with dual controls. [2]
While initial production was powered by the Beardmore, or by 150 hp (112 kW) Hispano-Suiza engines, later aircraft were fitted with a 200 hp (149 kW) Sunbeam Arab, which was mounted slightly to starboard of the centreline of the aircraft to overcome the greater torque of the more powerful engine. The Arab, however, proved unreliable, and the powerplant was changed again, to the 200 hp (149 kW) Hispano-Suiza 8 engine, which was mounted at an angle to overcome a similar torque problem as was observed with the Arab. [3]
The RNAS's (and after 1 April 1918, the Royal Air Force's) needs for the N.T.2B were beyond the capacity of Norman Thompson, so orders were placed with Supermarine and S. E. Saunders, [4] [5] as well as with the parent company. [a] At least 294 had been ordered by the end of the First World War, which brought about large scale cancellations. [3] [b]
The first N.T.2B was delivered to the RNAS flying school at Calshot on 8 July 1917, [3] the type becoming the standard training flying boat of the RNAS and RAF until the end of the First World War, [6] although delivery delays caused by the engine problems caused a backlog in training flying boat pilots. [7] [8] Seventy-nine were on charge with the RAF on 31 October 1918. It operated at bases at Felixstowe and Lee-on-Solent as well as Calshot. [9]
Following the end of the war, N.T.2Bs were sold to the air forces of Estonia, Peru and Norway. [3] Civil N.T.2Bs were flown in Norway [10] and Canada, where one aircraft remained in use for forestry patrols until 1929. [11]
Data from British Aeroplanes 1914-18 [9]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Sopwith Camel is a British First World War single-seat biplane fighter aircraft that was introduced on the Western Front in 1917. It was developed by the Sopwith Aviation Company as a successor to the Sopwith Pup and became one of the best known fighter aircraft of the Great War.
The Sopwith Pup is a British single-seater biplane fighter aircraft built by the Sopwith Aviation Company. It entered service with the Royal Naval Air Service and the Royal Flying Corps in the autumn of 1916. With pleasant flying characteristics and good manoeuvrability, the aircraft proved very successful. The Pup was eventually outclassed by newer German fighters, but it was not completely replaced on the Western Front until the end of 1917. Remaining Pups were relegated to Home Defence and training units. The Pup's docile flying characteristics also made it ideal for use in aircraft carrier deck landing and takeoff experiments and training.
The Avro 504 was a First World War biplane aircraft made by the Avro aircraft company and under licence by others. Production during the war totalled 8,970 and continued for almost 20 years, making it the most-produced aircraft of any kind that served in any military capacity during the First World War. More than 10,000 were built from 1913 until production ended in 1932.
The Short S.45 Seaford was a 1940s flying boat, designed as a long range maritime patrol bomber for RAF Coastal Command. It was developed from the Short S.25 Sunderland, and initially ordered as "Sunderland Mark IV".
The Airco DH.4 is a British two-seat biplane day bomber of the First World War. It was designed by Geoffrey de Havilland for Airco, and was the first British two-seat light day-bomber capable of defending itself.
The twin-engine F5L was one of the Felixstowe F series of flying boats developed by John Cyril Porte at the Seaplane Experimental Station, Felixstowe, England, during the First World War for production in America.
The Felixstowe F.2 was a 1917 British flying boat class designed and developed by Lieutenant Commander John Cyril Porte RN at the naval air station, Felixstowe during the First World War adapting a larger version of his superior Felixstowe F.1 hull design married with the larger Curtiss H-12 flying boat. The Felixstowe hull had superior water contacting attributes and became a key base technology in most seaplane designs thereafter.
The Felixstowe Porte Baby was a British reconnaissance flying boat of the First World War, first flying in 1915.
The Felixstowe F.5 was a British First World War flying boat designed by Lieutenant Commander John Cyril Porte RN of the Seaplane Experimental Station, Felixstowe.
The Curtiss Model H was a family of classes of early long-range flying boats, the first two of which were developed directly on commission in the United States in response to the £10,000 prize challenge issued in 1913 by the London newspaper, the Daily Mail, for the first non-stop aerial crossing of the Atlantic. As the first aircraft having transatlantic range and cargo-carrying capacity, it became the grandfather development leading to early international commercial air travel, and by extension, to the modern world of commercial aviation. The last widely produced class, the Model H-12, was retrospectively designated Model 6 by Curtiss' company in the 1930s, and various classes have variants with suffixed letters indicating differences.
The Norman Thompson N.T.4 was a twin-engined British flying boat of the First World War. Although less well known than similar Curtiss and Felixstowe flying boats, 50 were ordered for Britain's Royal Naval Air Service.
The Felixstowe F.4 Fury, also known as the Porte Super-Baby, was a large British, five-engined triplane flying-boat designed by John Cyril Porte at the Seaplane Experimental Station, Felixstowe, inspired by the Wanamaker Triplane/Curtiss Model T. At the time the Fury was the largest seaplane in the world, the largest British aircraft, and the first aircraft controlled successfully by servo-assisted means.
The FBA Type A and the similar Type B and C were a family of reconnaissance flying boats produced in France prior to and during World War I.
The White and Thompson No. 3 was a British flying boat of the First World War. While the prototype was originally designed to compete in an air-race around the UK, eight more similar aircraft were built for the Royal Naval Air Service.
The Norman Thompson N.1B was a prototype British flying boat fighter aircraft of the First World War. A two-seat single-engined pusher biplane, a single example was built in 1917, but no production followed.
The Sopwith Bat Boats were British flying boats designed and built from 1912 to 1914. A single-engined pusher biplane, the Bat Boat was the first successful flying boat and amphibious aircraft built in the United Kingdom, with examples used by the Royal Navy and by Greece and Germany.
The White & Thompson No. 1 Seaplane was the first British built twin-engined biplane flying boat, assembled just prior to the outbreak of the First World War to compete in an air-race around the UK. It was unsuccessful, only the single prototype being built.
The Norman Thompson Flight Company was a British aircraft manufacturer specialising in the construction of flying boats. It was formed as the White and Thompson Company in 1912, and designed and built the Norman Thompson NT.4 patrol aircraft and the N.T.2B flying boat trainer for the Royal Naval Air Service during the First World War, but production problems led to the company entering receivership in 1918, being liquidated in 1919.
The Wanamaker Triplane or Curtiss Model T, retroactively renamed Curtiss Model 3 was a large experimental four-engined triplane patrol flying boat of World War I. It was the first four-engined aircraft built in the United States. Only a single example (No.3073) was completed. At the time, the Triplane was the largest seaplane in the world.
The Gosport Aircraft Company was a short-lived British aircraft manufacturer based at Gosport, Hampshire formed at the start of the First World War by Sir Charles Allom of White, Allom & Company and Charles Ernest Nicholson of Camper and Nicholsons boat-builders. The company built a number of flying-boats for the British government including the hull for the Fairey Atalanta which at the time was the largest flying-boat hull built in the world.
One of the two N.T.2B's sent to Peru in 1919 by Handley Page Ltd.