Ordnance datum

Last updated

Vertical references in Europe Vertical references in Europe.svg
Vertical references in Europe
View from Newlyn harbour showing the lighthouse and Newlyn Tidal Observatory to its right, both painted red and white. Newlyn harbour light 342.jpg
View from Newlyn harbour showing the lighthouse and Newlyn Tidal Observatory to its right, both painted red and white.

An ordnance datum (OD) is a vertical datum used by an ordnance survey as the basis for deriving altitudes on maps. A spot height may be expressed as above ordnance datum (AOD). Usually mean sea level (MSL) at a particular place is used for the datum.

Contents

British Isles

Ordnance Datum Newlyn and its antecedents

The First Geodetic Levelling of England and Wales (1840–1860) needed to define a datum plane from which to specify spot heights. At first it was specified as a horizontal plane 100 feet below an arbitrary benchmark on St John's Church, Liverpool. Subsequently, however, it was redefined as mean sea level (MSL). To establish MSL, tidal observations were taken at the Victoria Dock, Liverpool, over a short period in 1844.

By the time of the Second Geodetic Levelling (1912–1921) the importance of stability was better appreciated and so it was decided to use Fundamental Bench Marks (FBMs) installed in solid rock, rather than on buildings as before. To measure average MSL around Great Britain three tide gauges were employed: at Dunbar, Newlyn and Felixstowe. However, it was found that the measured difference between the Dunbar and Newlyn stations was 0.81 feet (0.247m), far larger than could be accounted for by error. The difference was real. Accordingly, it was decided not to use average MSL and fix on one site: MSL Newlyn. Newlyn has certain practical advantages: it is set in granite bedrock, is far from major rivers, and it better represents deep ocean sea levels.

The difference between ODL (Liverpool) and ODN (Newlyn) was found to be 0.13 feet. It took some time for the changed definition — Liverpool to Newlyn — to work through the system: by 1950, some 40% of the lower secondary and tertiary levellings were still using the Liverpool datum. But following the Third Geodetic Levelling, Ordnance Survey maps published since March 1956 give spot heights above the Newlyn datum. [4] [5]

Newlyn Tidal Observatory was given grade II listing on 11 December 2018. [6]

Tunnel datum

Tunnel datum is a datum based on an ordnance datum and used in designing tunnels which pass below sea level.

See also

Related Research Articles

<span class="mw-page-title-main">Geodesy</span> Science of measuring the shape, orientation, and gravity of Earth

Geodesy or geodetics is the science of measuring and representing the geometry, gravity, and spatial orientation of the Earth in temporally varying 3D. It is called planetary geodesy when studying other astronomical bodies, such as planets or circumplanetary systems. Geodesy is an earth science and many consider the study of Earth's shape and gravity to be central to that science. It is also a discipline of applied mathematics.

<span class="mw-page-title-main">Sea level</span> Geographical reference point from which various heights are measured

Mean sea level is an average surface level of one or more among Earth's coastal bodies of water from which heights such as elevation may be measured. The global MSL is a type of vertical datum – a standardised geodetic datum – that is used, for example, as a chart datum in cartography and marine navigation, or, in aviation, as the standard sea level at which atmospheric pressure is measured to calibrate altitude and, consequently, aircraft flight levels. A common and relatively straightforward mean sea-level standard is instead a long-term average of tide gauge readings at a particular reference location.

<span class="mw-page-title-main">Projected coordinate system</span> Cartesian geographic coordinate system

A projected coordinate system – also called a projected coordinate reference system, planar coordinate system, or grid reference system – is a type of spatial reference system that represents locations on Earth using Cartesian coordinates (x, y) on a planar surface created by a particular map projection. Each projected coordinate system, such as "Universal Transverse Mercator WGS 84 Zone 26N," is defined by a choice of map projection (with specific parameters), a choice of geodetic datum to bind the coordinate system to real locations on the earth, an origin point, and a choice of unit of measure. Hundreds of projected coordinate systems have been specified for various purposes in various regions.

<span class="mw-page-title-main">Ordnance Survey National Grid</span> System of geographic grid references used in Great Britain

The Ordnance Survey National Grid reference system (OSGB), also known as British National Grid (BNG), is a system of geographic grid references, distinct from latitude and longitude, whereby any location in Great Britain can be described in terms of its distance from the origin, which lies to the west of the Isles of Scilly.

<span class="mw-page-title-main">Newlyn</span> Town in Cornwall, England

Newlyn is a seaside town and fishing port in south-west Cornwall, England, United Kingdom. It is the largest fishing port in England.

<span class="mw-page-title-main">Amsterdam Ordnance Datum</span> Vertical datum

Amsterdam Ordnance Datum or Normaal Amsterdams Peil (NAP) is a vertical datum in use in large parts of Western Europe. Originally created for use in the Netherlands, its height was used by Prussia in 1879 for defining Normalnull, and in 1955 by other European countries. In the 1990s, it was used as the reference level for the United European leveling Network (UELN) which in turn led to the European Vertical Reference System (EVRS).

<span class="mw-page-title-main">Geodetic datum</span> Reference frame for measuring location

A geodetic datum or geodetic system is a global datum reference or reference frame for unambiguously representing the position of locations on Earth by means of either geodetic coordinates or geocentric coordinates. Datums are crucial to any technology or technique based on spatial location, including geodesy, navigation, surveying, geographic information systems, remote sensing, and cartography. A horizontal datum is used to measure a horizontal position, across the Earth's surface, in latitude and longitude or another related coordinate system. A vertical datum is used to measure the elevation or depth relative to a standard origin, such as mean sea level (MSL). A three-dimensional datum enables the expression of both horizontal and vertical position components in a unified form. The concept can be generalized for other celestial bodies as in planetary datums.

<span class="mw-page-title-main">Retriangulation of Great Britain</span> 1935–1962 geodetic survey of Great Britain

The Retriangulation of Great Britain was a triangulation project carried out between 1935 and 1962 that sought to improve the accuracy of maps of Great Britain. Data gathered from the retriangulation replaced data gathered during the Principal Triangulation of Great Britain, which had been performed between 1783 and 1851.

<span class="mw-page-title-main">Elevation</span> Height of a geographic location above a fixed reference point

The elevation of a geographic location is its height above or below a fixed reference point, most commonly a reference geoid, a mathematical model of the Earth's sea level as an equipotential gravitational surface . The term elevation is mainly used when referring to points on the Earth's surface, while altitude or geopotential height is used for points above the surface, such as an aircraft in flight or a spacecraft in orbit, and depth is used for points below the surface.

<span class="mw-page-title-main">Benchmark (surveying)</span> Point with known height used in surveying when levelling

The term benchmark, bench mark, or survey benchmark originates from the chiseled horizontal marks that surveyors made in stone structures, into which an angle iron could be placed to form a "bench" for a leveling rod, thus ensuring that a leveling rod could be accurately repositioned in the same place in the future. These marks were usually indicated with a chiseled arrow – specifically a broad arrow – below the horizontal line. A benchmark is a type of survey marker.

<span class="mw-page-title-main">Chart datum</span> Level of water from which depths displayed on a nautical chart are measured

A chart datum is the water level surface serving as origin of depths displayed on a nautical chart and for reporting and predicting tide heights. A chart datum is generally derived from some tidal phase, in which case it is also known as a tidal datum. Common chart datums are lowest astronomical tide (LAT) and mean lower low water (MLLW). In non-tidal areas, e.g. the Baltic Sea, mean sea level (MSL) is used. A chart datum is a type of vertical datum and must not be confused with the horizontal datum for the chart.

The Permanent Service for Mean Sea Level is a repository for tide gauge data used in the measurement of long-term sea level change. The PSMSL is based at the National Oceanography Centre in Liverpool, England. It was founded in 1933 as the IUGG Mean Sea Level Committee, and adopted as a Permanent Service of the International Council for Science (ICSU) in 1958.

<span class="mw-page-title-main">Proudman Oceanographic Laboratory</span>

The former Proudman Oceanographic Laboratory (POL) is based in Brownlow Street, Liverpool, England. In April 2010, POL merged with the National Oceanography Centre, Southampton (NOCS) to form the National Oceanography Centre. The Liverpool laboratory's scientific research focuses on oceanography encompassing global sea-levels and geodesy, numerical modelling of continental shelf seas and coastal sediment processes. This research alongside activities of surveying, monitoring, data management and forecasting provides strategic support for the wider mission of the Natural Environment Research Council.

<span class="mw-page-title-main">National Geodetic Vertical Datum of 1929</span> Vertical datum in the United States

The National Geodetic Vertical Datum of 1929 is the official name since 1973 of the vertical datum established for vertical control surveying in the United States of America by the General Adjustment of 1929. Originally known as Sea Level Datum of 1929, NGVD 29 was determined and published by the United States Coast and Geodetic Survey and used to measure the elevation of a point above and depression below mean sea level (MSL).

<span class="mw-page-title-main">North American Vertical Datum of 1988</span> Vertical datum for orthometric heights

The North American Vertical Datum of 1988 is the vertical datum for orthometric heights established for vertical control surveying in the United States of America based upon the General Adjustment of the North American Datum of 1988.

<span class="mw-page-title-main">Vertical datum</span> Reference surface for vertical positions

In geodesy, surveying, hydrography and navigation, vertical datum or altimetric datum is a reference coordinate surface used for vertical positions, such as the elevations of Earth-bound features and altitudes of satellite orbits and in aviation. In planetary science, vertical datums are also known as zero-elevation surface or zero-level reference.

<span class="mw-page-title-main">Great South Wall</span> Sea wall at the Port of Dublin in Ireland

The Great South Wall, at the Port of Dublin, extends from the tip of the Poolbeg peninsula more than four kilometres out into Dublin Bay. It was the world's longest sea wall at the time of its construction and remains one of the longest in Europe. It faces the newer Bull Wall, and has one of four port lighthouses at its end.

<span class="mw-page-title-main">Metres above the Adriatic</span> Vertical datum used in parts of Europe

Metres above the Adriatic is the vertical datum used in Albania, Austria, Bosnia and Herzegovina, Croatia, Montenegro, North Macedonia, Serbia, and Slovenia to measure elevation, referring to the average water level of the Adriatic Sea at the Sartorio mole in the Port of Trieste.

<span class="mw-page-title-main">Vertical Offshore Reference Frames</span> UK and Irish hydrographic vertical datum

Vertical Offshore Reference Frames (VORF) is a set of high resolution surface models, published and maintained by the UK Hydrographic Office, which together define a vertical datum for hydrographic surveying and charting in the United Kingdom and Ireland.

<span class="mw-page-title-main">Newlyn Tidal Observatory</span> British tidal observatory

Newlyn Tidal Observatory is a grade II listed tide gauge hut on the South Pier in Newlyn, Cornwall in England. Measurements of sea level taken at the observatory between 1915 and 1921 were used to define the reference level, Ordnance Datum Newlyn, for height measurement on the British mainland. The tide gauge has collected over 100 years of observations which has significantly contributed to studies in sea level science.

References

  1. "Ordnance Survey Benchmark locator". Archived from the original on 27 December 2021. Retrieved 21 December 2021.
  2. "Newlyn Ordnance and Other Datums". 8 June 2021.
  3. 1 2 Irish Grid Reference System Archived 2008-06-14 at the Wayback Machine from OSI website
  4. Bradshaw, et al. (2016). "A Century of Sea Level Measurements at Newlyn, Southwest England". Marine Geodesy. 39 (2): 115–140. Bibcode:2016MarGe..39..115B. doi: 10.1080/01490419.2015.1121175 .
  5. "Ordnance Survey Benchmark locator". Archived from the original on 27 December 2021. Retrieved 21 December 2021.
  6. "Newlyn tidal observatory and part of the south pier". English Heritage. Retrieved 17 October 2023.
  7. "Victoria Station Upgrade Environmental Statement: Main Report" (PDF). Transport for London. 15 November 2007. pp. 2–6, §2.5.4, fn 2. Archived (PDF) from the original on 4 June 2011. Retrieved 28 July 2008.
  8. Radcliffe, Eric (1995). "Control and Construction Surveys". In Colin J Kirkland (ed.). Engineering the Channel Tunnel. Taylor & Francis. p. 53. ISBN   0-419-17920-8.