Oregon Railroad and Navigation 197

Last updated
Oregon Railroad & Navigation 197
OR&N 197 inside the ORHC, January 2013.jpg
OR&N No. 197 at the Oregon Rail Heritage Center in 2013
Type and origin
Power typeSteam
Builder Baldwin Locomotive Works
Serial number25717
Build dateMay 1905
Specifications
Configuration:
   Whyte 4-6-2
   UIC 2′C1′
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.77 in (1,956 mm)
Length79 ft (24.08 m)
Adhesive weight 142,740 lb (64.7 tonnes)
Loco weight241,180 lb (109.4 tonnes)
Fuel type Oil
Fuel capacity2,940 US gal (11,100 L; 2,450 imp gal)
Water cap.9,000 US gal (34,000 L; 7,500 imp gal)
Boiler pressure200 lbf/in2 (1.38 MPa)
Cylinder size Originally: 17 in × 28 in (432 mm × 711 mm) and 28 in × 28 in (711 mm × 711 mm),
As rebuilt: 22 in × 28 in (559 mm × 711 mm) from 1923
Performance figures
Tractive effort 29,920 lbf (133,100 N)
Factor of adh. 4.77
Career
OperatorsOregon Railroad & Navigation Co.,
Oregon-Washington Railroad & Navigation Co.,
Union Pacific Railroad
Oregon Rail Heritage Center
Class UP: P-2
Number in class4
NumbersOR&N 197
UP 3203
First run1905 (revenue service)
Retired1958 (revenue service)
Restored1996-Ongoing
Current owner The City of Portland, Oregon
DispositionUndergoing restoration to operating condition at the Oregon Rail Heritage Center in Portland, Oregon

Oregon Railroad and Navigation Co. 197 is a 4-6-2 "Pacific" type steam locomotive built by the Baldwin Locomotive Works in 1905 for the Oregon Railroad and Navigation Company (OR&N). Since the OR&N was controlled by E.H. Harriman at the time, this locomotive bears a strong resemblance to Southern Pacific locomotives of the same era, since the Southern Pacific was another E.H. Harriman controlled railroad. It has been owned by the City of Portland since 1958, [1] and since mid-2012 it resides at the Oregon Rail Heritage Center where it can be viewed by the public.

Contents

Revenue service (1905-1958)

OR&N 197 was built in May 1905 for pulling passenger trains on E.H. Harriman's Oregon Railroad and Navigation Company, a later subsidiary to the Union Pacific Railroad, in Oregon. The locomotive was first built as a Vauclain Compound along with her four other classmates, those being 194, 195, and 196. No. 197 arrived from the builders just in time to celebrate the 1905 Lewis and Clark Centennial Exposition.

It continued to serve for Portland, Oregon, when in 1923, it and its classmates were given heavy modifications (to P-2 class) by Union Pacific Railroad at its Albina Yard in Portland, that included a new Vanderbilt-type tender. The 197 was originally built as a four-cylinder compound (double expansion of the steam) locomotive with Stephenson valve gear, having the high pressure cylinders located between the frames. These high pressure cylinders drove the second driving axle which was of a crank design, similar to an automotive crankshaft. The low pressure cylinders received exhaust steam from the high pressure cylinders, and were located outside of the frames. These drove the second axle more conventionally, with external main rods driving crank pins on the driving wheels. In this 1923 rebuilding the engine also received new cylinders, converting her to simple (single expansion) two cylinder operation. The valve gear was also converted from Stephenson to Walschaert, which was becoming common on modern locomotives. All four members were renumbered Union Pacific 3200-3203, with 197 becoming 3203; at that time, the OR&N had been previously merged (in 1910) into by Oregon-Washington Railroad & Navigation Company, a subsidiary of Union Pacific.

The Union Pacific used the locomotive until its retirement in January 1958, when UP donated the locomotive to the City of Portland. It was placed on display near Oaks Amusement Park on land the city purchased for a future transportation museum, then named "Oaks Pioneer Park", where it was soon joined by the larger and more powerful 4-8-4 "Northern" type locomotives Southern Pacific 4449 and Spokane, Portland and Seattle 700 and other historic railroad and interurban equipment.

First retirement (1958-1995)

In December 1974, the SP 4449 was pulled out of Oaks Pioneer Park to be restored to pull the American Freedom Train, which would travel across the country during the United States Bicentennial. In 1987, SP&S 700 left the park to begin a restoration of its own, leaving the 197 the last engine in the park. The locomotive can be briefly seen in the 1993 movie Free Willy , while it was on display near Oaks Amusement Park at Oaks Pioneer Park. Due to a parking lot expansion, the 197 was moved a short distance from its original 1950s resting place at Oaks Pioneer Park. Otherwise, it sat almost forgotten until late 1995, when a small group of individuals banded together to consider returning the locomotive to operation.

First restoration career (1996-present)

It took several months of negotiations and several more months of mechanical work to prepare the engine for movement, but by early February 1996 the 197 was almost ready to move for the first time in nearly 40 years. On February 10, 1996, it was finally removed from Oaks Pioneer Park (now called Oaks Bottom Wildlife Refuge). It was then moved to the Southern Pacific (now Union Pacific) Brooklyn Roundhouse, where it once again joined SP 4449 and SP&S 700 to begin restoration. That day just happened to coincide with the height of severe flooding in the Portland area after a series of winter storms. The Willamette River was lapping at the embankment where the engine sat. The East Portland Traction Co. (now Oregon Pacific Railroad), owner of the nearby railroad right-of-way, had to clear several mudslides the preceding day, but the engine was moved without incident.

As of 2008, the restoration was about half complete and was expected to be completed as volunteers and funds are available.[ needs update ] It is being carried out by the non-profit all-volunteer "Friends of the OR&N 197".

Side view of OR&N 197 outside the Oregon Rail Heritage Center before construction of the center was completed Oregon Railroad & Navigation Co. 197 outside Oregon Rail Heritage Ctr 8-2012.jpg
Side view of OR&N 197 outside the Oregon Rail Heritage Center before construction of the center was completed

Until 2012, OR&N 197 and Portland's other two steam locomotives were stored in the last remaining roundhouse in Portland, which was located in an active Union Pacific freight yard, the Brooklyn yard. After UP announced plans to close the Brooklyn Roundhouse, in order to expand the freight yard to facilitate increasing intermodal traffic, the non-profit Oregon Rail Heritage Foundation was formed to develop plans, and raise funds, to build a permanent home and restoration facility for Portland's three steam locomotives. Construction of the Oregon Rail Heritage Center (ORHC) began in October 2011. [2] On June 26, 2012, Brooklyn Roundhouse ceased operations with three steam locomotives moving to the new site, and in early September the roundhouse building was torn down and the turntable was removed. [3] The ORHC opened to the public on September 22, 2012. [4]

In May 2023, it was announced that the ongoing restoration of Oregon Railroad & Navigation 197 got a major boost, in that a former Union Pacific executive would help raise the $1 million needed to get the 4-6-2 locomotive back under steam. Over the last few years a number of significant projects have been completed, including the rebuilding of the locomotive’s air pump and fabrication of an all-new cab. The "Friends of the OR&N 197" organization believes it will take about $1 million to restore the locomotive to operating condition. The group said the boiler and the running gear will be the two biggest projects for the team. The restoration will be completed with a combination of paid staff and volunteers. [5]

Related Research Articles

<span class="mw-page-title-main">Union Pacific Railroad</span> Class I freight railroad in the United States

The Union Pacific Railroad, legally Union Pacific Railroad Company and often called simply Union Pacific, is a freight-hauling railroad that operates 8,300 locomotives over 32,200 miles (51,800 km) routes in 23 U.S. states west of Chicago and New Orleans. Union Pacific is the second largest railroad in the United States after BNSF, with which it shares a duopoly on transcontinental freight rail lines in the Western, Midwestern and West South Central United States.

<span class="mw-page-title-main">Shay locomotive</span> Geared steam locomotive

The Shay locomotive is a geared steam locomotive that originated and was primarily used in North America. The locomotives were built to the patents of Ephraim Shay, who has been credited with the popularization of the concept of a geared steam locomotive. Although the design of Ephraim Shay's early locomotives differed from later ones, there is a clear line of development that joins all Shays. Shay locomotives were especially suited to logging, mining and industrial operations and could operate successfully on steep or poor quality track.

<span class="mw-page-title-main">Southern Pacific Transportation Company</span> United States Class I railroad (1865–1996)

The Southern Pacific was an American Class I railroad network that existed from 1865 to 1996 and operated largely in the Western United States. The system was operated by various companies under the names Southern Pacific Railroad, Southern Pacific Company and Southern Pacific Transportation Company.

<span class="mw-page-title-main">4-8-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.

<span class="mw-page-title-main">Oaks Amusement Park</span> Amusement park in Portland, Oregon

Oaks Park is a small amusement park located 3.5 miles (5.6 km) south of downtown Portland, Oregon, United States. The park opened in May 1905 and is one of the oldest continually operating amusement parks in the country.

<span class="mw-page-title-main">Railway turntable</span> Device for turning railway rolling stock

In rail terminology, a railway turntable or wheelhouse is a device for turning railway rolling stock, usually locomotives, so that they can be moved back in the direction from which they came. Naturally, it is especially used in areas where economic considerations or a lack of sufficient space have served to weigh against the construction of a turnaround wye. In the case of steam locomotives, railways needed a way to turn the locomotives around for return trips as their controls were often not configured for extended periods of running in reverse and in many locomotives the top speed was lower in reverse motion. In the case of diesel locomotives, though most can be operated in either direction, they are treated as having "front ends" and "rear ends". When a diesel locomotive is operated as a single unit, the railway company often prefers, or requires, that it be run "front end" first. When operated as part of a multiple unit locomotive consist, the locomotives can be arranged so that the consist can be operated "front end first" no matter which direction the consist is pointed. Turntables were also used to turn observation cars so that their windowed lounge ends faced toward the rear of the train.

<span class="mw-page-title-main">Sumpter Valley Railway</span>

The Sumpter Valley Railway, or Sumpter Valley Railroad, is a 3 ft narrow gauge heritage railroad located in Baker County, in the U.S. state of Oregon. Built on a right-of-way used by the original railway of the same name, it carries excursion trains on a roughly 5-mile (8.0 km) route between McEwen and Sumpter. The railroad has two steam locomotives and several other pieces of rolling stock. Passenger excursion trains operate on weekends and holidays from Memorial Day through the end of September.

<span class="mw-page-title-main">Southern Pacific class GS-4</span> Class of 28 American 4-8-4 locomotives

The Southern Pacific GS-4 is a class of streamlined 4-8-4 "Northern" type steam locomotive operated by the Southern Pacific Railroad (SP) from 1941 to 1958. A total of twenty-eight were built by the Lima Locomotive Works, numbered 4430 through 4457. GS stands for "Golden State" or "General Service."

<span class="mw-page-title-main">Southern Pacific 4449</span> Preserved SP GS-4 class 4-8-4 locomotive in Portland, Oregon

Southern Pacific 4449, also known as the Daylight, is the only surviving example of Southern Pacific Railroad's "GS-4" class of 4-8-4 "Northern" type steam locomotives and one of only two GS-class locomotives surviving, the other being "GS-6" 4460 at the National Museum of Transportation in St. Louis, Missouri. GS is an abbreviation of "General Service" or "Golden State," a nickname for California.

<span class="mw-page-title-main">Spokane, Portland and Seattle 700</span> Preserved American 4-8-4 steam locomotive

Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. Nearly identical to the class "A-3" Northerns built for Northern Pacific Railway, it burns oil instead of coal.

<span class="mw-page-title-main">Oil burner (engine)</span> Steam engine that uses oil as fuel

An oil burner engine is a steam engine that uses oil as its fuel. The term is usually applied to a locomotive or ship engine that burns oil to heat water, to produce the steam which drives the pistons, or turbines, from which the power is derived.

<span class="mw-page-title-main">Samtrak</span>

Samtrak was a heritage railroad that operated in Oregon from 1993 to 2001.

<i>Oregon Pony</i>

The Oregon Pony was the first steam locomotive to be built on the Pacific Coast and the first to be used in the Oregon Territory. The locomotive, a geared steam 5' gauge locomotive with 9"X18" cylinders and 34" drivers, was used in the early 1860s to portage steamboat passengers and goods past the Cascades Rapids, a dangerous stretch of the Columbia River now drowned by the Bonneville Dam. Steamboats provided transportation on the Columbia between Portland, Oregon and mining areas in Idaho and the Columbia Plateau. Portage was also necessary at other navigation obstructions, including Celilo Falls.

<span class="mw-page-title-main">Oregon Rail Heritage Foundation</span> American non-profit organization

The Oregon Rail Heritage Foundation (ORHF) is a registered non-profit organization based in Portland, Oregon, United States. Composed of a partnership of several all-volunteer non-profit groups dedicated to maintaining regional vintage railroad equipment, the ORHF was initially formed "to secure a permanent home for the City of Portland’s steam locomotives, preserve the Brooklyn Roundhouse, and establish a Rail and Industrial Heritage Museum.”

<span class="mw-page-title-main">Oregon Rail Heritage Center</span> Railway museum in Oregon, U.S.

The Oregon Rail Heritage Center (ORHC) is a railway museum in Portland, Oregon. Along with other rolling stock, the museum houses three steam locomotives owned by the City of Portland: Southern Pacific 4449, Spokane, Portland & Seattle 700, and Oregon Railroad & Navigation Co. 197, the first two of which are restored and operable. The center opened to the public on September 22, 2012. The project to establish the center was led by the Oregon Rail Heritage Foundation (ORHF), a non-profit organization, which was renamed from the Oregon Heritage Steam Foundation in 2002. The non-profit Oregon Steam Heritage Foundation was formed in 2000. The museum site is in Southeast Portland.

<span class="mw-page-title-main">History of the Union Pacific Railroad</span> American RR, 1862 to 1998

The history of the Union Pacific Railroad stretches from 1862 to the present. For operations of the current railroad, see Union Pacific Railroad; for the holding company that owns the current railroad, see Union Pacific Corporation.

<span class="mw-page-title-main">Union Pacific 5511</span> Preserved American 2-10-2 steam locomotive

Union Pacific 5511 is a 2-10-2 “Santa Fe” type steam locomotive built by the Baldwin Locomotive Works in 1923 as part of the Union Pacific Railroad's TTT-6 class. It is the last remaining member of its class and the only remaining 2-10-2 to be operated by the Union Pacific.

<span class="mw-page-title-main">Polson Logging Co. 2</span> Preserved American 2-8-2 steam locomotive

Polson Logging Company 2 is a 2-8-2 mikado steam locomotive built by Baldwin in 1912. It was originally built for the Saginaw Timber Company to pull logging trains. After that, it went through several ownership changes throughout both the steam era and the preservation era, before it was purchased by caretaker Skip Lichter in 1982. Lichter restored Polson Lumber 2 to operational condition and loaned it to the Mid-Continent Railway Museum in North Freedom, Wisconsin. The engine was later removed from service in 2000 to undergo a federally-mandated rebuild. Disagreement over who should cover the restoration costs ultimately led to an arbiter finding in Lichter's favor. After a 16-year restoration process, Polson Logging 2 returned to full steam in 2016. It was moved to the Oregon Coast Scenic Railroad the next year to operate on the railroad in Garibaldi, Oregon. Currently, it is stored at the Oregon Rail Heritage Center after being used to pull their Christmas trains in Oaks Park. It will be moved to the Albany and Eastern Railroad some time in 2023.

<span class="mw-page-title-main">Mount Emily Lumber Co. 1</span>

Mount Emily Lumber Company No. 1 is a three-truck shay steam locomotive that was originally owned by the Mount Emily Lumber Company. It was built in 1923 by the Lima Locomotive Works for the Hofus Steel and Equipment Company of Seattle, Washington. It was later sold to the Independence Logging Company of Independence, Washington, and then it was later sold to the Mount Emily Lumber Company of La Grande, Oregon. When it was retired in 1957, it was donated to the Oregon Museum of Science and Industry. One year later, in 1958, it was donated to the Oregon Historical Society of Portland, Oregon. The engine was operational at the City of Prineville Railroad, but it was announced in 2022 that the Oregon Rail Heritage Foundation would be the new owners of No. 1.

References

  1. Siemers, Erik (March 25, 2011). "Oregon Rail Heritage group gets more funding for historic-trains center". Portland Business Journal . Retrieved September 29, 2012.
  2. Beaven, Steve (October 21, 2011). "Commissioner Nick Fish breaks ground for Enginehouse & Rail Heritage Center in Southeast Portland". The Oregonian . Archived from the original on December 3, 2013. Retrieved September 29, 2012.
  3. Redden, Jim (July 12, 2012). "Rail history center: full steam ahead". Portland Tribune . p. A10. Archived from the original on February 9, 2015. Retrieved September 1, 2016.
  4. Tims, Dana (September 21, 2012) [published online September 20]. "Oregon Rail Heritage Center ready for grand opening Saturday, Sunday". The Oregonian . p. B1. Retrieved September 1, 2016.
  5. Oregon Railroad & Navigation 197 could steam again after a former Union Pacific executive promises a major matching grant. Photo Courtesy of Friends of OR&N 197.https://railfan.com/major-grant-pushes-restoration-of-union-pacific-4-6-2-forward/

Commons-logo.svg Media related to Oregon Railroad and Navigation Co. 197 at Wikimedia Commons