PL-01 | |
---|---|
Type | Light tank |
Place of origin | Poland |
Production history | |
Designer |
|
Designed | 2013 |
Manufacturer | OBRUM |
No. built | Unknown |
Specifications | |
Mass |
|
Length | 7.0 m (23 ft 0 in) |
Width | 3.8 m (12 ft 6 in) |
Height | 2.8 m (9 ft 2 in) |
Crew | 3 |
Armor | Steel composite armour and reactive armour |
Main armament | 1 × 105 mm or 120 mm caliber main cannon |
Secondary armament | 1 × 7.62 mm machine gun |
Engine | Diesel engine Above 940 hp (700 kW) |
Suspension | Torsion bar |
Operational range |
|
Maximum speed |
|
The PL-01 was a Polish light tank concept created by OBRUM with support from BAE Systems, based on the Swedish CV90120-T light tank. [1] [2] The concept vehicle was first unveiled at the International Defence Industry Exhibition in Kielce on 2 September 2013, [3] but the project was scrapped in 2015. [4]
The layout of the PL-01 is similar to modern standard main battle tanks. The driver is located at the front of the vehicle's hull, with the commander and gunner also located in the hull and the unmanned turret mounted in the rear. In addition, there is a rear compartment in the hull that can accommodate four soldiers. [5] The vehicle chassis is based on that of the Combat Vehicle 90. [6]
The vehicle armor has a modular ceramic-aramid shell, which is designed to provide protection compatible with NATO standard STANAG 4569 Annex A at level 5+ across the front portions of the hull and turret. Additional armor panels are mounted on the turret and hull and are designed to provide full protection against a range of projectiles. The hull of the vehicle provides protection against improvised explosive devices (IEDs) and landmines in accordance with appendix B parts 4a and 4b of the STANAG 4569 standard. The entire vehicle will be covered with radiation-absorbent material to create a Stealth ground vehicle. [5] [7] [8]
The PL-01 would be equipped with a 940 horsepower (700 kW)+ diesel engine coupled to a torque converter, automatic gearbox, and driving assistance mechanism. [5] The suspension is based on seven wheels, with the drive shafts having active damping of torsion bars mounted on the first and last two pairs. [9] The vehicle can reach speeds of up to 70 kilometres per hour (43 mph) on paved roads and 50 kilometres per hour (31 mph) in rough terrain with a maximum range of 500 kilometres (310 mi). It can successfully climb an inclination of 30 degrees, cross ditches and trenches to a width of 2.6 metres (8 ft 6 in), and cross water obstacles with a depth of up to 1.5 metres (4 ft 11 in) without preparation, and up to 5 metres (16 ft) deep with preparation. [5] [9]
The primary weapon of the PL-01 is a 105 mm or 120 mm cannon fitted within the unmanned turret, in accordance with NATO standards. The cannon will be able to shoot both conventional projectiles and guided anti-tank missiles. It has an automatic loader for its main cannon, which ensures a fire rate of 6 shots per minute. The vehicle carries 45 rounds, 16 of which are stored within the turret and ready to fire, with the remainder stored within the chassis compartment. The tank is also armed with a 7.62 mm UKM-2000C machine gun with an ammunition supply of 1,000 rounds. [2] [5] [7]
Additional equipment would be installed in a remote-controlled module. Planned designs included a 7.62 mm or 12.7 mm machine gun or a 40 mm automatic grenade launcher with a supply of 8,000 rounds of 7.62 mm, 400 rounds of 12.7 mm or 96 rounds of 40 mm grenades. Also built into the turret is an active protection system which intercepts incoming missiles, and smoke grenade launchers. [5] [7]
All equipment will be electronically stabilized, and observation and sighting systems will come with laser rangefinders, day-night cameras, and third-generation thermal imaging, with visual data displayed on a screen. [7]
The PL-01 is fitted with a fire extinguishing system in the turret and hull, an internal radio communication system, an active anti-projectile protection system, a battlefield management system, a cooling exhaust system, a thermal masking system, and air conditioning filters. The crew is provided with special seats to minimize the physical effects of nearby explosions. In addition, the vehicle may be equipped with a satellite navigation system and friend-foe identification system. [10] [5] [8]
In addition to its direct fire role, the vehicle can be configured as a command vehicle, mine clearance vehicle, or armored vehicle repair. [5]
The Merkava is a series of main battle tanks used by the Israel Defense Forces (IDF) and the backbone of the IDF's Armored Corps. Current iterations of this tank are considered broadly equivalent to the capabilities of the M1 Abrams, Leopard 2 and the Challenger 2. The current iteration of this vehicle also shares the same MTU EuroPowerPack powerplant as a number of other MBT platforms.
The BMP-1 is a Soviet amphibious tracked infantry fighting vehicle that has been in service from 1966 to the present. BMP stands for Boyevaya Mashina Pyekhoty 1, meaning "infantry fighting vehicle, 1st serial model". The BMP-1 was the first mass-produced infantry fighting vehicle (IFV) of the Soviet Union. It was called the M-1967, BMP and BMP-76PB by NATO before its correct designation was known.
The PT-91 Twardy is a Polish main battle tank. A development of the T-72M1, it entered service in 1995. The PT-91 was designed at the OBRUM and is produced by the Bumar Łabędy company, part of the Bumar Group, a Polish technical military consortium. Changes from the T-72M include a new dual-axis stabilized fire-control system, reactive armour, a more powerful engine, transmission and new automatic loader.
The Dardo is an infantry fighting vehicle designed for the Italian Army as a replacement for the M113 APC. It is designed and built by the Iveco Fiat Oto Melara Syndicated Company based in Rome. Iveco is responsible for the hull and propulsion systems, while Oto Melara is responsible for the weapons and fire control systems.
BTR-90 (GAZ-5923) is an 8×8 wheeled armored personnel carrier developed in Russia, designed in 1993 and first shown publicly in 1994. It is a larger version of the BTR-80 vehicle, fitted with a BMP-2 turret.
The BMPT "Terminator" is an armored fighting vehicle (AFV), designed and manufactured by the Russian company Uralvagonzavod. This vehicle was designed for supporting tanks and other AFVs in urban areas. The BMPT is unofficially named the "Terminator" by the manufacturers. It is heavily armed and armored to survive in urban combat. The AFV is armed with four 9M120 Ataka missile launchers, two 30 mm 2A42 autocannons, two AG-17D grenade launchers, and one coaxial 7.62 mm PKTM machine gun.
Tur is a light infantry mobility vehicle designed by the Polish factory AMZ-Kutno in 2007. The Tur was designed for intervention and patrol tasks behind front lines, specially equipped for operations in dangerous areas. It has a 5 person transport capacity.
The Lazar BVT is a Serbian mine resistant ambush protected vehicle (MRAP), manufactured by Yugoimport SDPR and named after Prince Lazar Hrebeljanović. It is not in operational use by the Serbian Army, which uses modified version, Lazar 3.
Otokar Arma is a 6x6 and 8x8 amphibious wheeled armored combat vehicle family designed and developed by Otokar. The vehicle is a modular multi-wheel configurable with a monocoque steel hull.
The WPB Anders is a family of medium, tracked combat vehicles. The vehicle was designed by OBRUM part of the Bumar Group. It is named after Władysław Anders, a general of the Polish Army during World War II and later a member of the Polish government-in-exile.
Tulpar is a Turkish heavy infantry fighting vehicle designed by the Sakarya-based automotive manufacturer Otokar. It is named after the Tulpar, a winged horse in Turkic mythology.
The LAZAR is a family of multi-role armoured personnel carriers, designed for various applications and missions, designed and developed by Yugoimport-SDPR. There are 3 versions of Lazar family of armoured vehicles: Lazar 1, Lazar 2, and Lazar 3.
The ATOM is a heavy 8×8 infantry fighting vehicle (IFV) jointly developed by the Russian company Petrel and the French company Renault Trucks. The vehicle is established on the basis of the French Véhicule blindé de combat d'infanterie (VBCI) IFV which is produced by Renault. The prototype of the ATOM was first unveiled during the 2013 Russian Arms Expo at Nizhny Tagil, equipped with a unique fighting module.
The Enigma is an 8×8 wheeled amphibious armored personnel carrier developed by Emirates Defense Technology in UAE. It was introduced at IDEX 2015.
The BOV M16 Miloš is a Serbian 4x4 multipurpose armoured vehicle (MPAV) used for military and law enforcement applications. It features a V-hull, integrating floating-floor plates, and blast-mitigation seating to protect occupants against land mines and improvised explosive devices (IEDs). The M16 Miloš was first publicly presented at IDEX 2017 exhibition in Abu Dhabi, UAE.
The Type 15, nicknamed the Black Panther, is a Chinese third generation light tank family operated by the People's Liberation Army Ground Force, People's Liberation Army Navy Marine Corps, and People's Liberation Army Air Force Airborne Corps. The tank is also exported to the Bangladesh Army. It is the effective successor to the Type 62 light tank that was retired from the Chinese army in 2013. The export version of the tank is known as VT-5.
The Pindad Badak is a 6×6 fire support vehicle designed and produced by PT Pindad. The name Badak means rhinoceros in Indonesian.
Borsuk is an amphibious infantry fighting vehicle produced by Huta Stalowa Wola, a part of PGZ. It is designed to replace the BWP-1 IFV that has been in service with the Polish Armed Forces since 1973 but is now obsolete.
The ZSSW-30 is a Polish remotely controlled turret designed by Huta Stalowa Wola and WB Electronics as a replacement for the Hitfist-30P turret of the Rosomak APC. It will also be fitted on the Borsuk IFV.