Pallophotophone

Last updated

The pallophotophone (coined from the Greek root words pallo, to oscillate or shake; photo, light; and phone, sound, therefore literally meaning "shaking light sound") was a photographic sound recording and playback system developed by General Electric researcher Charles A. Hoxie circa 1922. The RCA Photophone sound-on-film system for motion pictures was later derived from it.

Contents

System

The pallophotophone was an optical sound system which could record and play back audio tracks on a strip of 35 mm black-and-white photographic film. [1] Separate recording and playback units were employed. In recording, the sound waves vibrated a tiny mirror which reflected a ray of light through a narrow slit onto the moving film, creating a "sound track" that encoded the audio-frequency variations in air pressure as variations in the width of the track. After the film was developed, each track could be played by running it between a slit illuminated by a steady light and a photoelectric cell, converting the variations in track width into variations of light intensity and a similarly modulated electrical signal, which was electronically amplified and used to drive a loudspeaker or other device. [1]

Surviving examples of pallophotophone recordings have several tracks recorded in parallel on each strip of film, and Hoxie's system has therefore been called the world's first multitrack recording system, as it predates magnetic tape multitrack recording by several decades. However, unlike later multitrack optical, magnetic, and digital sound recording systems, multiple tracks on pallophotophone films are not known to have been used for later mixdown or similar post-production purposes, or for simultaneously recording two or more channels for stereophonic sound reproduction. Multiple narrow tracks, recorded one at a time in separate passes through the device, simply made much more economical use of the medium by multiplying the total recording time possible on a given length of 35 mm film running at a given speed.

History

During a brief period shortly after its creation, the pallophotophone system was occasionally put to practical use in radio broadcasting. On December 13, 1922, then-Vice President Calvin Coolidge used it to record a speech for broadcast on Christmas Eve. [2] In 1923, celebrities including Thomas Edison, Pope Pius XI, General Pershing and child star Jackie Coogan made pallophotophone recordings for later playback over the air. [3] Although the audio quality was reportedly as good as a live broadcast and the system was otherwise a technological success, these uses were experimental and the system was never adopted by the broadcasting industry.

In 1925, the Brunswick-Balke-Collender Company, maker of Brunswick phonograph records, licensed parts of GE's system for use in the electrical recording process it was developing. Instead of beaming the light onto photographic film, the vibrating mirror reflected it directly into a photoelectric cell, generating an electronic audio signal which was amplified and used to drive the side-to-side motions of the recording stylus as it engraved a spiral groove into the rotating wax master disc. Brunswick publicized its unique method as "Brunswick Light-Ray" recording. Used simply as a novel type of general-purpose microphone, this hollowed-out version of the pallophotophone proved to be very problematic. In 1927, Brunswick abandoned it in favor of the ordinary carbon and condenser microphones being used by its competitors.

In the later 1920s and early 1930s, GE experimented with variations of the system and recorded many radio broadcasts from its Schenectady, New York radio station WGY. Unlike the first-generation recorder, in these variants the tiny mirror was not vibrated directly by sound waves, but by an electromagnetic audio signal originating from a conventional microphone. In 1927, GE publicly unveiled a variable-area sound-on-film motion picture sound system based on this method. It was marketed by RCA (then a GE subsidiary) as RCA Photophone. In 1929, RKO Radio Pictures became the first motion picture studio to use Photophone exclusively. Western Electric later acquired the Photophone trademark.

21st century reconstruction

As far as is known, none of the original pallophotophone machines built by GE have survived to the present day, but some reels of pallophotophone recordings of radio broadcasts still exist. In 2008, thirteen reels were rediscovered in the archives of the Schenectady Museum by curator Chris Hunter and John Schneiter, a former GE researcher and museum board member. The films were labeled "radio programs of 1929–1930” and had several unusual characteristics that were puzzling. Unlike normal 35 mm film, they did not have sprocket holes. Schneiter contacted his former colleague Russ DeMuth, a mechanical engineer at GE Global Research, to help decipher the mysterious films. Hunter, Schneiter and DeMuth studied the patents and photographs of the original pallophotophone and built a new player from scratch, using modern components, with which they were able to recover the audio from the reels. [4]

The material on the surviving reels included:

Related Research Articles

<span class="mw-page-title-main">Tape recorder</span> Machine for recording sound

An audio tape recorder, also known as a tape deck, tape player or tape machine or simply a tape recorder, is a sound recording and reproduction device that records and plays back sounds usually using magnetic tape for storage. In its present-day form, it records a fluctuating signal by moving the tape across a tape head that polarizes the magnetic domains in the tape in proportion to the audio signal. Tape-recording devices include the reel-to-reel tape deck and the cassette deck, which uses a cassette for storage.

A cassette deck is a type of tape machine for playing and recording audio cassettes that does not have a built-in power amplifier or speakers, and serves primarily as a transport. It can be a part of an automotive entertainment system, a part of a portable mini system or a part of a home component system. In the latter case it is also called a component cassette deck or just a component deck.

<span class="mw-page-title-main">Quadraphonic sound</span> Four-channel speaker audio

Quadraphonic sound – equivalent to what is now called 4.0 surround sound – uses four audio channels in which speakers are positioned at the four corners of a listening space. The system allows for the reproduction of sound signals that are independent of one another.

<span class="mw-page-title-main">Recording studio</span> Facility for sound recording

A recording studio is a specialized facility for sound recording, mixing, and audio production of instrumental or vocal musical performances, spoken words, and other sounds. They range in size from a small in-home project studio large enough to record a single singer-guitarist, to a large building with space for a full orchestra of 100 or more musicians. Ideally, both the recording and monitoring spaces are specially designed by an acoustician or audio engineer to achieve optimum acoustic properties.

<span class="mw-page-title-main">Ampex</span> American company that pioneered the use of videotape

Ampex Data Systems Corporation is an American electronics company founded in 1944 by Alexander M. Poniatoff as a spin-off of Dalmo-Victor. The name AMPEX is a portmanteau, created by its founder, which stands for Alexander M. Poniatoff Excellence. Ampex operates as Ampex Data Systems Corporation, a subsidiary of Delta Information Systems, and consists of two business units. The Silicon Valley unit, known internally as Ampex Data Systems (ADS), manufactures digital data storage systems capable of functioning in harsh environments. The Colorado Springs, Colorado, unit, referred to as Ampex Intelligent Systems (AIS), serves as a laboratory and hub for the company's line of industrial control systems, cyber security products and services and its artificial intelligence/machine learning technology.

<span class="mw-page-title-main">Multitrack recording</span> Separate recording of multiple sound sources to create a cohesive whole

Multitrack recording (MTR), also known as multitracking or tracking, is a method of sound recording developed in 1955 that allows for the separate recording of multiple sound sources or of sound sources recorded at different times to create a cohesive whole. Multitracking became possible in the mid-1950s when the idea of simultaneously recording different audio channels to separate discrete "tracks" on the same reel-to-reel tape was developed. A "track" was simply a different channel recorded to its own discrete area on the tape whereby their relative sequence of recorded events would be preserved, and playback would be simultaneous or synchronized.

<span class="mw-page-title-main">Reel-to-reel audio tape recording</span> Audio recording using magnetic tape spooled on open reels

Reel-to-reel audio tape recording, also called open-reel recording, is magnetic tape audio recording in which the recording tape is spooled between reels. To prepare for use, the supply reel containing the tape is placed on a spindle or hub. The end of the tape is manually pulled from the reel, threaded through mechanical guides and over a tape head assembly, and attached by friction to the hub of the second, initially empty takeup reel. Reel-to-reel systems use tape that is 1⁄4, 1⁄2, 1, or 2 inches wide, which normally moves at 3+3⁄4, 7+1⁄2, 15 or 30 inches per second. All standard tape speeds are derived as a binary submultiple of 30 inches per second.

<span class="mw-page-title-main">Monaural</span> Sound intended to be heard as if it were emanating from one position

Monaural or monophonic sound reproduction is sound intended to be heard as if it were emanating from one position. This contrasts with stereophonic sound or stereo, which uses two separate audio channels to reproduce sound from two microphones on the right and left side, which is reproduced with two separate loudspeakers to give a sense of the direction of sound sources. In mono, only one loudspeaker is necessary, but, when played through multiple loudspeakers or headphones, identical signals are fed to each speaker, resulting in the perception of one-channel sound "imaging" in one sonic space between the speakers. Monaural recordings, like stereo ones, typically use multiple microphones fed into multiple channels on a recording console, but each channel is "panned" to the center. In the final stage, the various center-panned signal paths are usually mixed down to two identical tracks, which, because they are identical, are perceived upon playback as representing a single unified signal at a single place in the soundstage. In some cases, multitrack sources are mixed to a one-track tape, thus becoming one signal. In the mastering stage, particularly in the days of mono records, the one- or two-track mono master tape was then transferred to a one-track lathe used to produce a master disc intended to be used in the pressing of a monophonic record. Today, however, monaural recordings are usually mastered to be played on stereo and multi-track formats, yet retain their center-panned mono soundstage characteristics.

<span class="mw-page-title-main">Sound-on-film</span> Class of sound film processes

Sound-on-film is a class of sound film processes where the sound accompanying a picture is recorded on photographic film, usually, but not always, the same strip of film carrying the picture. Sound-on-film processes can either record an analog sound track or digital sound track, and may record the signal either optically or magnetically. Earlier technologies were sound-on-disc, meaning the film's soundtrack would be on a separate phonograph record.

<span class="mw-page-title-main">Stereophonic sound</span> Method of sound reproduction using two audio channels

Stereophonic sound, or more commonly stereo, is a method of sound reproduction that recreates a multi-directional, 3-dimensional audible perspective. This is usually achieved by using two independent audio channels through a configuration of two loudspeakers in such a way as to create the impression of sound heard from various directions, as in natural hearing.

The NBC chimes are a sequence of three tones played on National Broadcasting Company (NBC) broadcasts. Originally developed in 1927 as seven notes, they were standardized to the current three-note version by the early 1930s, and possibly as early as 1929. The chimes were originally employed as an audible programming cue, used to alert network control engineers and the announcers at NBC's radio network affiliates. They soon became associated with NBC programming in general, and are an early example of an "interval signal" used to help establish a broadcaster's identity with its audience.

<span class="mw-page-title-main">Ribbon microphone</span> Type of microphone

A ribbon microphone, also known as a ribbon velocity microphone, is a type of microphone that uses a thin aluminum, duraluminum or nanofilm of electrically conductive ribbon placed between the poles of a magnet to produce a voltage by electromagnetic induction. Ribbon microphones are typically bidirectional, meaning that they pick up sounds equally well from either side of the microphone.

<span class="mw-page-title-main">Movietone sound system</span> Sound system for film

The Movietone sound system is an optical sound-on-film method of recording sound for motion pictures that guarantees synchronization between sound and picture. It achieves this by recording the sound as a variable-density optical track on the same strip of film that records the pictures. The initial version was capable of a frequency response of 8500 Hz. Although sound films today use variable-area tracks, any modern motion picture theater can play a Movietone film without modification to the projector. Movietone was one of four motion picture sound systems under development in the U.S. during the 1920s, the others being DeForest Phonofilm, Warner Brothers' Vitaphone, and RCA Photophone, though Phonofilm was primarily an early version of Movietone.

<span class="mw-page-title-main">Sound recording and reproduction</span> Recording of sound and playing it back

Sound recording and reproduction is the electrical, mechanical, electronic, or digital inscription and re-creation of sound waves, such as spoken voice, singing, instrumental music, or sound effects. The two main classes of sound recording technology are analog recording and digital recording.

The history of sound recording - which has progressed in waves, driven by the invention and commercial introduction of new technologies — can be roughly divided into four main periods:

<span class="mw-page-title-main">RCA Photophone</span> Early film audio synchronization system

RCA Photophone was the trade name given to one of four major competing technologies that emerged in the American film industry in the late 1920s for synchronizing electrically recorded audio to a motion picture image. RCA Photophone was an optical sound, "variable-area" film exposure system, in which the modulated area (width) corresponded to the waveform of the audio signal. The three other major technologies were the Warner Bros. Vitaphone sound-on-disc system, as well as two "variable-density" sound-on-film systems, Lee De Forest's Phonofilm, and Fox-Case's Movietone.

<span class="mw-page-title-main">History of multitrack recording</span>

Multitrack recording of sound is the process in which sound and other electro-acoustic signals are captured on a recording medium such as magnetic tape, which is divided into two or more audio tracks that run parallel with each other. Because they are carried on the same medium, the tracks stay in perfect synchronization, while allowing multiple sound sources to be recorded at different times.

<span class="mw-page-title-main">Optical sound</span> Storing sound recordings on film

Optical sound is a means of storing sound recordings on transparent film. Originally developed for military purposes, the technology first saw widespread use in the 1920s as a sound-on-film format for motion pictures. Optical sound eventually superseded all other sound film technologies until the advent of digital sound became the standard in cinema projection booths. Optical sound has also been used for multitrack recording and for creating effects in some musical synthesizers.

<span class="mw-page-title-main">Sound follower</span> Recording device

A sound follower, also referred to as separate magnetic, sepmag, magnetic film recorder, or mag dubber, is a device for the recording and playback of film sound that is recorded on magnetic film. This device is locked or synchronized with the motion picture film containing the picture. It operates like an analog reel-to-reel audio tape recording, but using film, not magnetic tape. The unit can be switched from manual control to sync control, where it will follow the film with picture.

<span class="mw-page-title-main">Music technology (electric)</span> Musical instruments and recording devices that use electrical circuits

Electric music technology refers to musical instruments and recording devices that use electrical circuits, which are often combined with mechanical technologies. Examples of electric musical instruments include the electro-mechanical electric piano, the electric guitar, the electro-mechanical Hammond organ and the electric bass. All of these electric instruments do not produce a sound that is audible by the performer or audience in a performance setting unless they are connected to instrument amplifiers and loudspeaker cabinets, which made them sound loud enough for performers and the audience to hear. Amplifiers and loudspeakers are separate from the instrument in the case of the electric guitar, electric bass and some electric organs and most electric pianos. Some electric organs and electric pianos include the amplifier and speaker cabinet within the main housing for the instrument.

References

  1. 1 2 Radio Digest, September 15, 1923, p.13 shows three tracks on perforated 35 mm film; the surviving examples recently in the news, from later years (1929–1931), are on unperforated 35 mm film and carry up to 12 tracks.
  2. ↑ Vice-president Calvin Coolidge speaks into the Pallophotophone sound-on-film recorder at the Willard Hotel in Washington, D.C. (photograph) Accessed August 5, 2016.
  3. ↑ Broadcasting History – Various Articles, Part 1 (see the 24 Mar 1998 communication from Dr. Michael Biel, widely acknowledged as the foremost authority on early broadcast recordings and author of numerous articles in peer-reviewed publications). Accessed August 5, 2016.
  4. ↑ Interview with Russ DeMuth, "Reinventing the Pallophotophone", 'Edison's Desk' blog
  5. ↑ Shoshani, Michael. (2005–2016). "Origin and Evolution of the NBC Chimes". Accessed August 8, 2016. Shoshani dates the pallophotophone recordings of the chimes to April 1930 and describes two earlier recordings made by other means. Some nth generation online sources have claimed that the pallophotophone recordings are the earliest known.
  6. ↑ James Grahame, "Recreating The RCA Photophone", Retro Thing website
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.