Paper battery

Last updated

A paper battery is engineered to use a spacer formed largely of cellulose (the major constituent of paper). It incorporates nanoscopic scale structures to act as high surface-area electrodes to improve conductivity. [1]

Contents

In addition to being unusually thin, paper batteries are flexible and environmentally-friendly, [2] allowing integration into a wide range of products. Their functioning is similar to conventional chemical batteries with the important difference that they are non-corrosive and do not require extensive housing.

Advantages

The composition of these batteries is what sets them apart from traditional batteries. Paper is abundant and self-sustaining, which makes paper cheap. Disposing of paper is also inexpensive since paper is combustible as well as biodegradable. Using paper gives the battery a great degree of flexibility. The battery can be bent or wrapped around objects instead of requiring a fixed casing. Also, being a thin, flat sheet, the paper battery can easily fit into tight places, reducing the size and weight of the device it powers. The use of paper increases the electron flow which is well suited for high performance applications. Paper allows for capillary action so fluids in batteries, such as electrolytes, can be moved without the use of an external pump. Using paper in batteries increases the surface area that can be used to integrate reagents. The paper used in paper batteries can be supplemented to improve its performance characteristics. Patterning techniques such as photolithography, wax printing, and laser micromachining are used to create hydrophobic and hydrophilic sections on the paper to create a pathway to direct the capillary action of the fluids used in batteries. Similar techniques can be used to create electrical pathways on paper to create paper electrical devices and can integrate paper energy storage. [3]

1.Used as both battery and capacitor. 2.It is flexible. 3.It is ultra thin energy storage device. 4.Long lasting. 5.Non toxic. 6.Steady power production. 7.biodegradable 8.no leaking and overheating

Disadvantages

Although the advantages of paper batteries are quite impressive, many of the components that make them great, such as carbon nanotubes and patterning, are complicated and expensive. [3]

1. Prone to tearing.

2. Nanotubes made from carbon are expensive due to use of procedures like electrolysis and laser ablation.

3. Should not be inhaled, as they can damage lungs.

Electrolytes

This cellulose based spacer is compatible with many possible electrolytes. Researchers used ionic liquid, essentially a liquid salt, as the battery’s electrolyte, as well as naturally occurring electrolytes such as human sweat, blood and urine. Use of an ionic liquid, containing no water, would mean that the batteries would not freeze or evaporate, potentially allowing operation in extreme temperatures.[ citation needed ] The operating conditions (e.g. temperature, humidity, static pressure) of such batteries would depend on the physical and chemical properties of the electrolyte, as well as the durability of the cellulose mesh; both potentially limiting factors.

Potential applications

The paper-like quality of the battery combined with the structure of the nanotubes embedded within gives them light weight and low cost, offering potential for portable electronics, aircraft, automobiles and toys (such as model aircraft).

The batteries employ nanotubes, potentially slowing commercial adoption due to excessive cost. Commercial adoption also requires larger devices. E.g., a newspaper-sized device could be powerful enough to power a car. [4]

Paper can be integrated into several different forms of batteries, such as electrochemical batteries, biofuel cells, lithium-ion batteries, supercapacitors, and nanogenerators.

Electrochemical batteries

Electrochemical batteries can be modified to integrate the use of paper. An electrochemical battery typically uses two metals, separated into two chambers and connected by a bridge or a membrane which permits the exchange of electrons between the two metals, thereby producing energy. Paper can be integrated into electrochemical batteries by depositing the electrode onto the paper and by using paper to contain the fluid used to activate the battery. Paper that has been patterned can also be used in electrochemical batteries. This is done to make the battery more compatible with paper electronics. These batteries tend to produce low voltage and operate for short periods of time, but they can be connected in series to increase their output and capacity. Paper batteries of this type can be activated with bodily fluids which makes them very useful in the healthcare field such as single-use medical devices or tests for specific diseases. [3] A battery of this type has been developed with a longer life to power point of care devices for the healthcare industry. The device used a paper battery made using a magnesium foil anode and a silver cathode has been used to detect diseases in patients such as kidney cancer, liver cancer, and osteoblastic bone cancer. The paper was patterned using wax printing and is able to be easily disposed of. Furthermore, this battery was developed at a low cost and has other practical application. [5]

Lithium-ion batteries

Paper can be used in lithium-ion batteries as regular, commercial paper, or paper enhanced with single-walled carbon nanotubes. Enhanced paper is used as the electrode and as the separator which results in a sturdy, flexible battery that have great performance capabilities such as good cycling, great efficiency, and good reversibility. Using paper as a separator is more effective than using plastic. The process of enhancing the paper, however, can be complicated and costly, depending on the materials used. A carbon nanotube and silver nanowire film can be used to coat regular paper to create a simpler and less expensive separator and battery support. The conductive paper can also be used to replace traditionally used metallic chemicals. The resulting battery performs well, while simplifying the manufacturing process and reducing the cost. Lithium-ion paper batteries are flexible, durable, rechargeable, and produce significantly more power than electrochemical batteries. In spite of these advantages, there are still some drawbacks. In order for paper to be integrated with the Li-ion battery, complex layering and insulating techniques are required for the battery to function as desired. One reason these complex techniques are used is to strengthen the paper used so that it does not tear as easily. This contributes to the overall strength and flexibility of the battery. These techniques require time, training, and costly materials. Additionally, the individual materials required are not environmentally friendly and require specific disposal procedures. Paper lithium-ion batteries would be best suited for applications requiring a substantial amount of energy over an extended period of time. [3] Lithium-ion paper batteries can be composed of carbon nanotubes and a cellulose based membrane and produce good results, but at a high price tag. Other researchers have been successful using carbon paper manufactured from pyrolyzed filter paper. The paper is inserted in between the electrode and cathode. The use of a carbon paper as an interlayer in Li-S batteries improves the batteries efficiency and capacity. The carbon paper increases the contact area between the cathode and the electrode which allows for greater flow of electrons. The pores in the paper allow the electrons to travel easily while preventing the anode and the cathode from being in contact with one another. This translates into greater output, battery capacity and cycle stability; these are improvements to conventional Li-S batteries. The carbon paper is made from pyrolyzed filter paper which is inexpensive to make and performs like multi-walled carbon nanotube paper used as a battery. [6]

Biofuel cells

Biofuel cells operate similarly to electrochemical batteries, except that they utilize components such as sugar, ethanol, pyruvate, and lactate, instead of metals to facilitate redox reactions to produce electrical energy. Enhanced paper is used to contain and separate the positive and negative components of the biofuel cell. This paper biofuel cell started up much more quickly than a conventional biofuel cell since the porous paper was able to absorb the positive biofuel and promote the attachment of bacteria to the positive biofuel. This battery capable of producing a significant amount of power after being activated by a wide range of liquids and then be disposed of. Some development must take place, since some components are toxic and expensive. [3]

Naturally occurring electrolytes might allow biocompatible batteries for use on or within living bodies. Paper batteries were described by a researcher as “a way to power a small device such as a pacemaker without introducing any harsh chemicals – such as the kind that are typically found in batteries — into the body.” [7]

Their ability to use electrolytes in the blood make them potentially useful for medical devices such as pacemakers, medical diagnostic equipment, and drug delivery transdermal patches. German healthcare company KSW Microtech is using the material to power blood supply temperature monitoring.[ citation needed ]

Supercapacitors

Paper battery technology can be used in supercapacitors. [8] [9] Supercapacitors operate and are manufactured similarly to electrochemical batteries, but are generally capable of greater performance and are able to be recharged. Paper, or enhanced paper can be used to develop thin, flexible supercapacitors that are lightweight less expensive. Paper that has been enhanced with carbon nanotubes is generally preferred over regular paper because it has increased strength and allows for easier transfer of electrons between the two metals. The electrolyte and the electrode are embedded into the paper which produces a flexible paper supercapacitor that can compete with some commercial supercapacitors produced today. A paper supercapacitor would be well suited for a high power application. [3]

Nanogenerators

Nanogenerators are a more recent devices that convert mechanical energy to electrical energy. Paper is desirable as a component of nanogenerators for the same reasons discussed above. Such devices are able to capture movement, such as body movement, and convert that energy into electrical energy that could power LED lights, for example. [3]

See also

Related Research Articles

<span class="mw-page-title-main">Electrode</span> Electrical conductor used to make contact with nonmetallic parts of a circuit

An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit. Electrodes are essential parts of batteries that can consist of a variety of materials depending on the type of battery.

<span class="mw-page-title-main">Lithium-ion battery</span> Rechargeable battery type

A lithium-ion or Li-ion battery is a type of rechargeable battery which uses the reversible reduction of lithium ions to store energy. The negative electrode of a conventional lithium-ion cell is typically graphite, a form of carbon. This negative electrode is sometimes called the anode as it acts as an anode during discharge. The positive electrode is typically a metal oxide; the positive electrode is sometimes called the cathode as it acts as a cathode during discharge. Positive and negative electrodes remain positive and negative in normal use whether charging or discharging and are therefore clearer terms to use than anode and cathode which are reversed during charging.

A polymer-based battery uses organic materials instead of bulk metals to form a battery. Currently accepted metal-based batteries pose many challenges due to limited resources, negative environmental impact, and the approaching limit of progress. Redox active polymers are attractive options for electrodes in batteries due to their synthetic availability, high-capacity, flexibility, light weight, low cost, and low toxicity. Recent studies have explored how to increase efficiency and reduce challenges to push polymeric active materials further towards practicality in batteries. Many types of polymers are being explored, including conductive, non-conductive, and radical polymers. Batteries with a combination of electrodes are easier to test and compare to current metal-based batteries, however batteries with both a polymer cathode and anode are also a current research focus. Polymer-based batteries, including metal/polymer electrode combinations, should be distinguished from metal-polymer batteries, such as a lithium polymer battery, which most often involve a polymeric electrolyte, as opposed to polymeric active materials.

<span class="mw-page-title-main">Nanobatteries</span> Type of battery

Nanobatteries are fabricated batteries employing technology at the nanoscale, particles that measure less than 100 nanometers or 10−7 meters. These batteries may be nano in size or may use nanotechnology in a macro scale battery. Nanoscale batteries can be combined to function as a macrobattery such as within a nanopore battery.

<span class="mw-page-title-main">Lithium-ion capacitor</span> Hybrid type of capacitor

A lithium-ion capacitor is a hybrid type of capacitor classified as a type of supercapacitor. It is called a hybrid because the anode is the same as those used in lithium-ion batteries and the cathode is the same as those used in supercapacitors. Activated carbon is typically used as the cathode. The anode of the LIC consists of carbon material which is often pre-doped with lithium ions. This pre-doping process lowers the potential of the anode and allows a relatively high output voltage compared to other supercapacitors.

<span class="mw-page-title-main">Thin-film lithium-ion battery</span> Type of battery

The thin film lithium-ion battery is a form of solid-state battery. Its development is motivated by the prospect of combining the advantages of solid-state batteries with the advantages of thin-film manufacturing processes.

A solid-state battery deploys solid-state technology using solid electrodes and a solid electrolyte, instead of the liquid or polymer gel electrolytes found in lithium-ion or lithium polymer batteries.

Nanoball batteries are an experimental type of battery with either the cathode or anode made of nanosized balls that can be composed of various materials such as carbon and lithium iron phosphate. Batteries which use nanotechnology are more capable than regular batteries because of the vastly improved surface area which allows for greater electrical performance, such as fast charging and discharging.

Nanoarchitectures for lithium-ion batteries are attempts to employ nanotechnology to improve the design of lithium-ion batteries. Research in lithium-ion batteries focuses on improving energy density, power density, safety, durability and cost.

The lithium–air battery (Li–air) is a metal–air electrochemical cell or battery chemistry that uses oxidation of lithium at the anode and reduction of oxygen at the cathode to induce a current flow.

<span class="mw-page-title-main">Pseudocapacitor</span>

Pseudocapacitors store electrical energy faradaically by electron charge transfer between electrode and electrolyte. This is accomplished through electrosorption, reduction-oxidation reactions, and intercalation processes, termed pseudocapacitance.

A potassium-ion battery or K-ion battery is a type of battery and analogue to lithium-ion batteries, using potassium ions for charge transfer instead of lithium ions. It was invented by the Iranian/American chemist Ali Eftekhari in 2004.

<span class="mw-page-title-main">Supercapacitor</span> Electrochemical capacitor

A supercapacitor (SC), also called an ultracapacitor, is a high-capacity capacitor, with a capacitance value much higher than other capacitors but with lower voltage limits. It bridges the gap between electrolytic capacitors and rechargeable batteries. It typically stores 10 to 100 times more energy per unit volume or mass than electrolytic capacitors, can accept and deliver charge much faster than batteries, and tolerates many more charge and discharge cycles than rechargeable batteries.

Aluminium-ion batteries are a class of rechargeable battery in which aluminium ions serve as charge carriers. Aluminium can exchange three electrons per ion. This means that insertion of one Al3+ is equivalent to three Li+ ions. Thus, since the ionic radii of Al3+ (0.54 Å) and Li+ (0.76 Å) are similar, significantly higher numbers of electrons and Al3+ ions can be accepted by cathodes with little damage. Al has 50 times (23.5 megawatt-hours m-3) the energy density of Li and is even higher than coal.

<span class="mw-page-title-main">Pseudocapacitance</span> Storage of electricity within an electrochemical cell

Pseudocapacitance is the electrochemical storage of electricity in an electrochemical capacitor known as a pseudocapacitor. This faradaic charge transfer originates by a very fast sequence of reversible faradaic redox, electrosorption or intercalation processes on the surface of suitable electrodes. Pseudocapacitance is accompanied by an electron charge-transfer between electrolyte and electrode coming from a de-solvated and adsorbed ion. One electron per charge unit is involved. The adsorbed ion has no chemical reaction with the atoms of the electrode since only a charge-transfer takes place.

Research in lithium-ion batteries has produced many proposed refinements of lithium-ion batteries. Areas of research interest have focused on improving energy density, safety, rate capability, cycle durability, flexibility, and cost.

<span class="mw-page-title-main">NASICON</span>

NASICON is an acronym for sodium (Na) Super Ionic CONductor, which usually refers to a family of solids with the chemical formula Na1+xZr2SixP3−xO12, 0 < x < 3. In a broader sense, it is also used for similar compounds where Na, Zr and/or Si are replaced by isovalent elements. NASICON compounds have high ionic conductivities, on the order of 10−3 S/cm, which rival those of liquid electrolytes. They are caused by hopping of Na ions among interstitial sites of the NASICON crystal lattice.

<span class="mw-page-title-main">Flexible battery</span> Type of battery

Flexible batteries are batteries, both primary and secondary, that are designed to be conformal and flexible, unlike traditional rigid ones. They can maintain their characteristic shape even against continual bending or twisting. The increasing interest in portable and flexible electronics has led to the development of flexible batteries which can be implemented in products such as smart cards, wearable electronics, novelty packaging, flexible displays and transdermal drug delivery patches. The advantages of flexible batteries are their conformability, light weight, and portability, which makes them easy to be implemented in products such as flexible and wearable electronics. Hence efforts are underway to make different flexible power sources including primary and rechargeable batteries with high energy density and good flexibility.

Lithium hybrid organic batteries are an energy storage device that combines lithium with an organic polymer. For example, polyaniline vanadium (V) oxide (PAni/V2O5) can be incorporated into the nitroxide-polymer lithium iron phosphate battery, PTMA/LiFePO4. Together, they improve the lithium ion intercalation capacity, cycle life, electrochemical performances, and conductivity of batteries.

Conductive agents are used to ensure electrodes have good charge and discharge performance. Usually, a certain amount of conductive material is added during the production of the pole piece, and the micro current is collected between the active material and the current collector to reduce the micro current. The contact resistance of the electrode accelerates the rate of movement of electrons, and at the same time, can effectively increase the migration rate of lithium ions in the electrode material, thereby improving the charge and discharge efficiency of the electrode. The conductive agent carbon black is used for improving the conductivity of the electrodes and decreasing the resistance of interaction.

References

  1. ↑ Pushparaj, Victor L.; Shaijumon, Manikoth M.; Kumar, Ashavani; Murugesan, Saravanababu; Ci, Lijie; Vajtai, Robert; et al. (August 2007). "Flexible energy storage devices based on nanocomposite paper" (PDF). Proceedings of the National Academy of Sciences. 104 (34): 13575–7. Bibcode:2007PNAS..10413574P. doi: 10.1073/pnas.0706508104 . PMC   1959422 . PMID   17699622 . Retrieved 23 July 2014.
  2. ↑ "EDN:Paper batteries are they for real?".
  3. 1 2 3 4 5 6 7 Nguyen, T.; Fraiwan, A.; Choi, S. (2014). "Paper-based batteries: A review". Biosensors and Bioelectronics. 54: 640–649. doi:10.1016/j.bios.2013.11.007. PMID   24333937.
  4. ↑ "Paper battery offers future power". BBC News. 14 August 2007. Retrieved 2008-01-15.
  5. ↑ Koo, Y.; Sankar, J.; Yun, Y. (2014). "High performance magnesium anode in paper-based microfluidic battery, powering on-chip fluorescence assay". Biomicrofluidics. 8 (5): 7. doi:10.1063/1.4894784. PMC   4189589 . PMID   25332741.
  6. ↑ Zhang, K.; Li, Q.; Zhang, L.; Fang, J.; Li, J.; Qin, F.; Lai, Y. (2014). "From filter paper to carbon paper and towards Li-S battery interlayer". Materials Letters. 121: 198–201. doi:10.1016/j.matlet.2014.01.151.
  7. ↑ "Beyond Batteries: Storing Power in a Sheet of Paper". Rensselaer Polytechnic Institute. 13 August 2007. Retrieved 2008-01-15.
  8. ↑ Pushparaj, Victor L.; Manikoth, Shaijumon M.; Kumar, Ashavani; Murugesan, Saravanababu; Ci, Lijie; Vajtai, Robert; Linhardt, Robert J.; Nalamasu, Omkaram; Ajayan, Pulickel M. "Flexible Nanocomposite Thin Film Energy Storage Devices" (PDF). Proceedings of the National Academy of Sciences USA 104, 13574-13577, 2007. Archived from the original (PDF) on 2010-06-10. Retrieved 2010-08-08.
  9. ↑ Malti A.; Edberg E.; Granberg H.; Zia Ullah K.; Liu X.; Zhao D.; Zhang H.; Yao Y.; Brill J.; Engquist I.; Fahlman M.; Wagberg L.; Crispin X.; Berggren M. (2016). "An Organic Mixed Ion–Electron Conductor for Power Electronics". Advanced Science. Vol. 3, no. 2. Advanced Science 3, 1500305, 2016. doi:10.1002/advs.201500305.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.