Pertec

Last updated
Pertec Computer Corporation
IndustryComputer Peripherals
PredecessorPeripheral Equipment Corporation
Founded1967;57 years ago (1967) [1]
Defunct1987 (1987)
FateAcquired by Triumph-Adler
Headquarters
Chatsworth, California
,
United States

Pertec Computer Corporation (PCC), formerly Peripheral Equipment Corporation (PEC), was a computer company based in Chatsworth, California which originally designed and manufactured peripherals such as floppy drives, tape drives, instrumentation control and other hardware for computers. [2]

Contents

Pertec's most successful products were hard disk drives and tape drives, which were sold as OEM to the top computer manufacturers, including IBM, Siemens and DEC. Pertec manufactured multiple models of seven and nine-track half-inch tape drives with densities 800CPI (NRZI) and 1600CPI (PE) and phase-encoding formatters, which were used by myriad original equipment manufacturers as I/O devices for their product lines.

In the 1970s, Pertec entered the computer industry through several acquisitions of computer producers and started manufacturing and marketing mostly minicomputers for data processing and pre-processing. This split up Pertec into two companies. Pertec Peripherals Corporation (PPC), which remained based in Chatsworth, California, and Pertec Computer Corporation (PCC), which was located at 17112 Armstrong Avenue, in Irvine, California.

Pertec and MITS

Altair 8800B, on display at the Living Computer Museum in Seattle, Washington Altair8800b.jpg
Altair 8800B, on display at the Living Computer Museum in Seattle, Washington

Pertec bought MITS, the manufacturers of the MITS Altair computer, for US$6.5 million in 1976. This purchase was motivated mainly by the ownership of the Microsoft BASIC sources and general license that Pertec erroneously assumed to be included in the deal. They also acquired iCOM Microperipherals, makers of computer peripherals, in the same year. They believed that these acquisitions would change them from selling computers mostly for hobbyists, to selling them for small businesses. [3]

Pertec changed their name, after the acquisition of MITS, from Pertec Corporation to Pertec Computer Corporation to "be more reflective of the company's present position and to clearly state our future direction". [4]

As a result of the acquisition, Pertec became involved in the manufacturing of microprocessor-based computers. Their first models were expanded versions of the Altair models, typically coupled to the existing disk-drive range. [5] Despite initially good sales, the Altair's 8080 CPU was becoming increasingly outdated, so Pertec decided to retire the Altair as well as the MITS name itself.

In 1978, the company launched the first of its own designs, the PCC-2000. [6] This was based on two Intel 8085 series microprocessors: one of which was given over to I/O control. Being a high end machine, it was intended to be the core of what would now be described as a workgroup. The machine was intended to support four "dumb" terminals connected via RS-232 serial lines, in addition to its internal console. The basic machine had twin 8-inch floppy drives, each capable of storing 1.2 megabytes and could link to two Pertec twin 14-inch disk drives, giving a total of 22.4 megabytes of storage, which was a very large amount for the time. The system was generally supplied with a multi-user operating system called MTX, which included a BASIC interpreter that was similar to Business Basic. The PCC-2000 was also available with MITS DOS or CP/M. In the UK, several systems were run under BOS. Unfortunately, the PCC-2000 was too expensive for the market and was never a great success.

Pertec Business Systems

Pertec/MITS 300

Pertec/MITS 300/55 Business System. Currently on display at the Living Computer Museum in Seattle, Washington. PertecMITS 300 55 Business System.jpg
Pertec/MITS 300/55 Business System. Currently on display at the Living Computer Museum in Seattle, Washington.

The MITS 300 was the first product built and released by the Pertec after their acquisition of MITS in 1977. They produced the 300/25 and the 300/55. [7] Both were fully integrated systems that included both hardware and software in one package. [8] The 300/25 used Pertec floppy diskette drives and the 300/55 added Pertec DC-3000 14-inch hard disk. [9] The system consists of the MITS 2nd generation Altair 8800 (or Altair 8800b) computer with hard drive controller and MITS datakeeper storage system. The complete 300/55 business system sold for $15,950 and included the Altair 8800b with 64k of dynamic RAM, a CRT terminal and a desk. [10] The system was designed to handle a variety of business applications including word processing, inventory control and accounting. This system was prone to overheating and had a very short life span. [11]

The new system allowed for MITS peripherals including Altair Floppy Disc, Altair Line Printer, Teletypewriter, and the Altair CRT terminal. [12] The printer was a bidirectional Mits/Altair C-700 that could print 60 characters/second and 26 lines/minute. [13]

Pertec PCC-2100

Pertec's primary line of computer products was aimed at the key-to-disk minicomputer systems that were used as front-end data processors for the IBM 360/370 and similar systems. This line was opened in the first half of the 1970s by the Pertec PCC-2100 data entry system, which was essentially different from the PCC-2000 mentioned above. The system was able to serve up to 16 coaxial terminals, two D3000 disk drives and one T1640 tape drive.

Pertec XL-40

Pertec XL-40, introduced in 1977, was a more successful successor of Pertec PCC-2100. [14] The XL-40 machine used custom 16-bit processors built from the TI3000 or AMD2900 slices, up to 512 KB operating memory and dedicated master-capable DMA controllers for tape units, floppy and rigid disk units, printers, card reader and terminals.

The maximum configuration came in two different versions. One featured four T1600 / T1800 tape units (manufactured by Pertec), two floppy disk units (manufactured by IBM or Pertec) and four D1400 / D3400 rigid disk units (4.4, 8.8, 17.6 MB formatted capacity, manufactured by Pertec or Kennedy). The other one featured two large capacity disk units (up to 70 MB formatted capacity, manufactured by Kennedy or NEC), one line printer connected through long-line interface (DataProducts LP600, LP1200, B300, Printronix P300, P600), four station printers connected through coaxial cable (Centronics), one card reader (Pertec), four SDLC communication channels and 30 proprietary coax terminals (Model 4141 with 40x12 characters or Model 4143 with 80x25 characters).

The system was mainly used for key-to-disk operations to replace the previously popular IBM card punches and more advanced key-to-tape systems manufactured for example by Mohawk Data Sciences (MDS) or Singer. In addition to the basic key-to-disk function, the proprietary operating system, called XLOS, supported indexed file operations for on-line transaction processing even with data journaling. The system was programmed in two different ways. The data entry was either described in several tables that specified the format of the input record with optional automatic data validation procedures or the indexed file operations were programmed in a special COBOL dialect with IDX and SEQ file support.

System maintenance operations were performed in a protected supervisor mode; the system supported batched operations in the supervisor mode through the use of batch files that specified operator selections. The operating system interacted with the user through a series of prompts with automatic on-screen explanations and default selections, probably the ultimate user-friendliness achievable in text-only human-computer interaction. The XL-40 was also marketed by Triumph-Adler in Europe as TA1540, the beginning of a relationship that would eventually see a merger of the two companies.

Pertec 3200

Pertec's final in-house computer design was a complete departure, the MC68000-based Series 3200. [15] The primary operating system was an in-house developed multi-tasking, multi-user operating system, but it could also run Unix. As with the XL40, Triumph-Adler marketed the system in Europe under their own brand with the model name MSX 3200 (There were four models, eventually, in the Triumph-Adler series: 3200, 3220, 3230 and 3240). The key to disk application from the XL40 was re-implemented on the 3200. The other main application was a BASIC language driven database, similar to the ones used by MAI Basic Four or Pick operating system. These BASIC database business systems would be purchased by outside companies that bundled the PCC 3200 with their software to provide a complete small business package (accounts payable, accounts receivable, payroll, inventory, sales tracking, taxes, etc.) customized for specific businesses.

The 3200 was extremely advanced for the time, being intended to support up to 32 users, all using intelligent Z80-based terminals, each of which could optionally run CP/M attached to the 3200's high speed coax cable. Later an ISA bus to 3200 coax interface was made for the PC, and this allowed the usage of PC's as smart terminals for the 3200 or as networked systems running MS-DOS. It was the first Pertec product to support the emerging "Winchester" standard for miniature hard disks.

Eventual fate

Soon after the introduction of the 3200, Pertec Computer Corporation was purchased by Triumph-Adler, from 2010 owned by Kyocera. Later PCC was acquired by Scan-Optics in February 1987. [16] During the transition from systems based on custom-made CPUs to CPUs made by Intel and Motorola, prices for these systems dropped dramatically, but without an offsetting increase in demand, and eventually companies such as PCC slowly dwindled away to small remnants of their peak days in the mid-1980s, or were bought out by larger companies.

Pertec's PPC magnetic tape interface standard of the early 1970s rapidly became an industry-wide standard and is still in use by tape drive manufacturers today. [17] Similarly, its PERTEC disk interface was an industry standard for pre-Winchester disk drives of the 1970s.

Related Research Articles

<span class="mw-page-title-main">TRS-80</span> 1977 microcomputer by Tandy Corporation

The TRS-80 Micro Computer System is a desktop microcomputer launched in 1977 and sold by Tandy Corporation through their Radio Shack stores. The name is an abbreviation of Tandy Radio Shack, Z80 [microprocessor]. It is one of the earliest mass-produced and mass-marketed retail home computers.

<span class="mw-page-title-main">IBM Series/1</span> 1970s era IBM minicomputer

The IBM Series/1 is a 16-bit minicomputer, introduced in 1976, that in many respects competed with other minicomputers of the time, such as the PDP-11 from Digital Equipment Corporation and similar offerings from Data General and HP. The Series/1 was typically used to control and operate external electro-mechanical components while also allowing for primitive data storage and handling.

<span class="mw-page-title-main">IMSAI 8080</span> Microcomputer

The IMSAI 8080 is an early microcomputer released in late 1975, based on the Intel 8080 and S-100 bus. It is a clone of its main competitor, the earlier MITS Altair 8800. The IMSAI is largely regarded as the first "clone" microcomputer. The IMSAI machine runs a highly modified version of the CP/M operating system called IMDOS. It was developed, manufactured and sold by IMS Associates, Inc.. In total, between 17,000 and 20,000 units were produced from 1975 to 1978.

Micro Instrumentation and Telemetry Systems (MITS) was an American electronics company founded in Albuquerque, New Mexico that began manufacturing electronic calculators in 1971 and personal computers in 1975.

<span class="mw-page-title-main">IBM 3790</span>

The IBM 3790 Communications System was one of the first distributed computing platforms. The 3790 was developed by IBM's Data Processing Division (DPD) and announced in 1974. It preceded the IBM 8100, announced in 1979.

Timex Sinclair was a joint venture established in December 1982 between the British company Sinclair Research and Timex Corporation in an effort to gain an entry into the rapidly growing early-1980s home computer market in North America.

Ohio Scientific, Inc., was a privately owned American computer company based in Ohio that built and marketed computer systems, expansions, and software from 1975 to 1986. Their best-known products were the Challenger series of microcomputers and Superboard single-board computers. The company was the first to market microcomputers with hard disk drives in 1977.

<span class="mw-page-title-main">Diablo Data Systems</span> Computer hardware company, printers, disk drives

Diablo Data Systems was a division of Xerox created by the acquisition of Diablo Systems Inc. for US$29 million in 1972, a company that had been founded in 1969 by George E. Comstock, Charles L. Waggoner and others. The company was the first to release a daisy wheel printer, in 1970.

Atari 8-bit computer peripherals include floppy drives, printers, modems, and video game controllers for Atari's 8-bit computer family, which includes the 400/800, XL, XE, and XEGS.

Cromemco was a Mountain View, California microcomputer company known for its high-end Z80-based S-100 bus computers and peripherals in the early days of the personal computer revolution.

<span class="mw-page-title-main">Heathkit H8</span> 1970s microcomputer

Heathkit's H8 is an Intel 8080A-based microcomputer sold in kit form starting in 1977. The H8 is similar to the S-100 bus computers of the era, and like those machines is often used with the CP/M operating system on floppy disk.

Edos is a discontinued operating system based upon IBM's original mainframe DOS. The name stood for extended disk operating system. It was later purchased by the West German computer company Nixdorf, who renamed it to NIDOS.

<span class="mw-page-title-main">Altos Computer Systems</span> Unix manufacturer

Altos Computer Systems was founded in 1977 by David G. Jackson and Roger William Vass Sr. It focused on small multi-user computers, starting with multi-user derivatives of CP/M, and later including Unix and Xenix-based machines. In its 1982 initial public offering on NASDAQ, the company raised $59M. Thereafter the company's stock was traded under the symbol ALTO.

<span class="mw-page-title-main">Home computer</span> Class of microcomputers

Home computers were a class of microcomputers that entered the market in 1977 and became common during the 1980s. They were marketed to consumers as affordable and accessible computers that, for the first time, were intended for the use of a single, non-technical user. These computers were a distinct market segment that typically cost much less than business, scientific, or engineering-oriented computers of the time, such as those running CP/M or the IBM PC, and were generally less powerful in terms of memory and expandability. However, a home computer often had better graphics and sound than contemporary business computers. Their most common uses were word processing, playing video games, and programming.

The Tandon Corporation was an American disk drive and PC manufacturer founded in 1975 by Sirjang Lal Tandon, a former mechanical engineer. The company originally produced magnetic recording read/write heads for the then-burgeoning floppy-drive market. Due to the labor-intensive nature of the product, production was carried out in low-wage India where production costs were lower. This was the key to the company's competitiveness. In the late 1970s, Tandon developed direct equivalents to Shugart floppy drives, and is credited with the invention of DS/DD versions which became its primary product in the early 1980s.

PolyMorphic Systems was a manufacturer of microcomputer boards and systems based on the S-100 bus. Their products included the Poly-88 and the System 8813. The company was incorporated in California in 1976 as Interactive Products Corporation d/b/a PolyMorphic Systems. It was initially based in Goleta, then Santa Barbara, California.

<span class="mw-page-title-main">Percom</span>

Percom Data Corporation was an early microcomputer company formed in 1976 to sell peripherals into the emerging microcomputer market. They are best known for their floppy disk systems, first for S-100 machines, and the later for other platforms like the TRS-80 and the Atari 8-bit family. The company was purchased by Esprit Systems in 1984.

<span class="mw-page-title-main">PDP-8/e</span> 1970 model of the DEC PDP-8 line of minicomputers

The PDP-8/e was a model of the PDP-8 line of minicomputers, designed by the Digital Equipment Corporation to be a general purpose computer that inexpensively met the needs of the average user while also being capable of modular expansion to meet the more specific needs of advanced user.

Smoke Signal Broadcasting, Inc. (SSB), later known as Smoke Signal, was an American computer company founded in 1976 by Frederic Jerome "Ric" Hammond of Hollywood, California. The company earned its reputation by offering expansions for the Southwest Technical Products (SWTPC) 6800 microcomputer. It later manufactured its own line of computers, called the Chieftain. Though it remains little-known, Smoke Signal was an early and important manufacturer of multi-user computer systems.

References

  1. ↑ Pertec's New Owner Hopes to Revitalize High-Tech Pioneer, Los Angeles Times, November 18, 1986
  2. ↑ Wiseman, Toni (Dec 6, 1976). "Pertec Targets Both End of Peripheral Spectrum". Computerworld. 10 (49). Newton, MA: Computerworld Inc.: 54. ISSN   0010-4841.
  3. ↑ Pertec Computer Corporation Annual Report 1977.
  4. ↑ Ryal R. Poppa, Chairman, President and CEO, Pertec Computer Corporation Annual Report 1977.
  5. ↑ "Pertec Builds Business Systems Around Mits/Altair 8800B Micro". Computerworld. 12 (4). CW Communications Inc.: 56 Jan 23, 1978. ISSN   0010-4841.
  6. ↑ Segal, Hillel (Aug 11, 1980). "Pertec PCC 2000 Features Software, Not Speed". Computerworld. 14 (32): 24. ISSN   0010-4841.
  7. ↑ "MITS/Pertec Altair 8800/680b/MITS 300". pcmuseum.tripod.com.
  8. ↑ Pertec Computer Corporation (Jan 1978). "MITS Newest Business System" (PDF). Computer Notes. 3 (7): 21. Retrieved 11 July 2016.
  9. ↑ "Altair Computer Systems". www.virtualaltair.com.
  10. ↑ "Exhibits - Living Computer Museum". www.livingcomputermuseum.org. Archived from the original on 2016-02-05. Retrieved 2016-07-12.
  11. ↑ "System Details. The Freeman PC Museum... Largest Collection of Vintage Computers On The Web". www.thepcmuseum.net.
  12. ↑ Bunnell, David (July 1976). "Imagine a Microcomputer". MITS Computer Notes: 4.
  13. ↑ IDG Enterprise (January 23, 1978). "Pertec Builds Business Systems around Mits/Altair 8800B Micro". Computerworld. 12 (4). Retrieved 11 July 2016.
  14. ↑ Pertec Computer Corporation (Sep 5, 1977). "You'd be surprised how well the XL40 performs". Computerworld. 11 (36). Computerworld Inc.: 27. ISSN   0010-4841.
  15. ↑ Mace, Scott (Jun 6, 1983). "Pertec makes a comeback with dual-processor, multiuser series". InfoWorld. Vol. 5, no. 23. Popular Publishing Inc. p. 8. ISSN   0199-6649. Prices for the 3200 line start at $5000 for the Model 3205, which includes a 68000 processor … The 3200 series comes a proprietary operating system that can download 8-bit CP/M software programs…
  16. ↑ Value Line Investment Survey. Vol. 45 Issues 27-32. Value Line Inc. 1989. Acquired Pertec Computer 2/87. Revenues derived from sales (66.8%), service Scan-Optics had a large operating loss in 1989.
  17. ↑ "Comark Offers Tape Controller for Pertec Drives". Computerworld. Framingham, Mass.: CW Communications. May 16, 1983. p. 126. The MT 86 is a multibus resident 1/2-in. magnetic tape interface to in industry standard reel-to-reel Pertec Computer Corp.-compatible tape drive
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.