Photoconductivity

Last updated

Photoconductivity is an optical and electrical phenomenon in which a material becomes more electrically conductive due to the absorption of electromagnetic radiation such as visible light, ultraviolet light, infrared light, or gamma radiation. [1]

Contents

When light is absorbed by a material such as a semiconductor, the number of free electrons and holes increases, resulting in increased electrical conductivity. [2] To cause excitation, the light that strikes the semiconductor must have enough energy to raise electrons across the band gap, or to excite the impurities within the band gap. When a bias voltage and a load resistor are used in series with the semiconductor, a voltage drop across the load resistors can be measured when the change in electrical conductivity of the material varies the current through the circuit.

Classic examples of photoconductive materials include:

Molecular photoconductors include organic, [6] inorganic, [7] and – more rarely – coordination compounds. [8] [9]

Applications

When a photoconductive material is connected as part of a circuit, it functions as a resistor whose resistance depends on the light intensity. In this context, the material is called a photoresistor (also called light-dependent resistor or photoconductor). The most common application of photoresistors is as photodetectors, i.e. devices that measure light intensity. Photoresistors are not the only type of photodetector—other types include charge-coupled devices (CCDs), photodiodes and phototransistors—but they are among the most common. Some photodetector applications in which photoresistors are often used include camera light meters, street lights, clock radios, infrared detectors, nanophotonic systems and low-dimensional photo-sensors devices. [10]

Sensitization

Sensitization is an important engineering procedure to amplify the response of photoconductive materials. [3] The photoconductive gain is proportional to the lifetime of photo-excited carriers (either electrons or holes). Sensitization involves intentional impurity doping that saturates native recombination centers with a short characteristic lifetime, and replacing these centers with new recombination centers having a longer lifetime. This procedure, when done correctly, results in an increase in the photoconductive gain of several orders of magnitude and is used in the production of commercial photoconductive devices. The text by Albert Rose is the work of reference for sensitization. [11]

Negative photoconductivity

Some materials exhibit deterioration in photoconductivity upon exposure to illumination. [12] One prominent example is hydrogenated amorphous silicon (a-Si:H) in which a metastable reduction in photoconductivity is observable [13] (see Staebler–Wronski effect). Other materials that were reported to exhibit negative photoconductivity include ZnO nanowires, [14] molybdenum disulfide, [15] graphene, [16] indium arsenide nanowires, [17] decorated carbon nanotubes, [18] and metal nanoparticles. [19]

Under an applied AC voltage and upon UV illumination, ZnO nanowires exhibit a continuous transition from positive to negative photoconductivity as a function of the AC frequency. [14] ZnO nanowires also display a frequency-driven metal-insulator transition at room temperature. The responsible mechanism for both transitions has been attributed to a competition between bulk conduction and surface conduction. [14] The frequency-driven bulk-to-surface transition of conductivity is expected to be a generic character of semiconductor nanostructures with the large surface-to-volume ratio.

Magnetic photoconductivity

In 2016 it was demonstrated that in some photoconductive material a magnetic order can exist. [20] One prominent example is CH3NH3(Mn:Pb)I3. In this material a light induced magnetization melting was also demonstrated [20] thus could be used in magneto optical devices and data storage.

Photoconductivity spectroscopy

The characterization technique called photoconductivity spectroscopy (also known as photocurrent spectroscopy) is widely used in studying optoelectronic properties of semiconductors. [21] [22]

See also

Related Research Articles

Photocurrent is the electric current through a photosensitive device, such as a photodiode, as the result of exposure to radiant power. The photocurrent may occur as a result of the photoelectric, photoemissive, or photovoltaic effect. The photocurrent may be enhanced by internal gain caused by interaction among ions and photons under the influence of applied fields, such as occurs in an avalanche photodiode (APD).

<span class="mw-page-title-main">Photodiode</span> Converts light into current

A photodiode is a semiconductor diode sensitive to photon radiation, such as visible light, infrared or ultraviolet radiation, X-rays and gamma rays. It produces an electrical current when it absorbs photons. This can be used for detection and measurement applications, or for the generation of electrical power in solar cells. Photodiodes are used in a wide range of applications throughout the electromagnetic spectrum from visible light photocells to gamma ray spectrometers.

A nanowire is a nanostructure in the form of a wire with the diameter of the order of a nanometre. More generally, nanowires can be defined as structures that have a thickness or diameter constrained to tens of nanometers or less and an unconstrained length. At these scales, quantum mechanical effects are important—which coined the term "quantum wires".

<span class="mw-page-title-main">Photoresistor</span> Light dependent resistor

A photoresistor is a passive component that decreases resistance with respect to receiving luminosity (light) on the component's sensitive surface. The resistance of a photoresistor decreases with increase in incident light intensity; in other words, it exhibits photoconductivity. A photoresistor can be applied in light-sensitive detector circuits and light-activated and dark-activated switching circuits acting as a resistance semiconductor. In the dark, a photoresistor can have a resistance as high as several megaohms (MΩ), while in the light, a photoresistor can have a resistance as low as a few hundred ohms. If incident light on a photoresistor exceeds a certain frequency, photons absorbed by the semiconductor give bound electrons enough energy to jump into the conduction band. The resulting free electrons conduct electricity, thereby lowering resistance. The resistance range and sensitivity of a photoresistor can substantially differ among dissimilar devices. Moreover, unique photoresistors may react substantially differently to photons within certain wavelength bands.

<span class="mw-page-title-main">Optoelectronics</span> Branch of electronics involving optics

Optoelectronics is the study and application of electronic devices and systems that find, detect and control light, usually considered a sub-field of photonics. In this context, light often includes invisible forms of radiation such as gamma rays, X-rays, ultraviolet and infrared, in addition to visible light. Optoelectronic devices are electrical-to-optical or optical-to-electrical transducers, or instruments that use such devices in their operation.

<span class="mw-page-title-main">Quantum dot</span> Zero-dimensional, nano-scale semiconductor particles with novel optical and electronic properties

Quantum dots (QDs) or semiconductor nanocrystals are semiconductor particles a few nanometres in size with optical and electronic properties that differ from those of larger particles via quantum mechanical effects. They are a central topic in nanotechnology and materials science. When a quantum dot is illuminated by UV light, an electron in the quantum dot can be excited to a state of higher energy. In the case of a semiconducting quantum dot, this process corresponds to the transition of an electron from the valence band to the conductance band. The excited electron can drop back into the valence band releasing its energy as light. This light emission (photoluminescence) is illustrated in the figure on the right. The color of that light depends on the energy difference between the conductance band and the valence band, or the transition between discrete energy states when the band structure is no longer well-defined in QDs.

<span class="mw-page-title-main">Zinc oxide</span> White powder insoluble in water

Zinc oxide is an inorganic compound with the formula ZnO. It is a white powder that is insoluble in water. ZnO is used as an additive in numerous materials and products including cosmetics, food supplements, rubbers, plastics, ceramics, glass, cement, lubricants, paints, sunscreens, ointments, adhesives, sealants, pigments, foods, batteries, ferrites, fire retardants, semi conductors, and first-aid tapes. Although it occurs naturally as the mineral zincite, most zinc oxide is produced synthetically.

<span class="mw-page-title-main">Photodetector</span> Sensors of light or other electromagnetic energy

Photodetectors, also called photosensors, are sensors of light or other electromagnetic radiation. There are a wide variety of photodetectors which may be classified by mechanism of detection, such as photoelectric or photochemical effects, or by various performance metrics, such as spectral response. Semiconductor-based photodetectors typically use a p–n junction that converts photons into charge. The absorbed photons make electron–hole pairs in the depletion region. Photodiodes and photo transistors are a few examples of photo detectors. Solar cells convert some of the light energy absorbed into electrical energy.

Phaedon Avouris is a Greek chemical physicist and materials scientist. He is an IBM Fellow and was formerly the group leader for Nanometer Scale Science and Technology at the Thomas J. Watson Research Center in Yorktown Heights, New York.

Hybrid solar cells combine advantages of both organic and inorganic semiconductors. Hybrid photovoltaics have organic materials that consist of conjugated polymers that absorb light as the donor and transport holes. Inorganic materials in hybrid cells are used as the acceptor and electron transporter in the structure. The hybrid photovoltaic devices have a potential for not only low-cost by roll-to-roll processing but also for scalable solar power conversion.

Lead selenide (PbSe), or lead(II) selenide, a selenide of lead, is a semiconductor material. It forms cubic crystals of the NaCl structure; it has a direct bandgap of 0.27 eV at room temperature. A grey solid, it is used for manufacture of infrared detectors for thermal imaging. The mineral clausthalite is a naturally occurring lead selenide.

<span class="mw-page-title-main">Gallium(III) oxide</span> Chemical compound

Gallium(III) oxide is an inorganic compound and ultra-wide-bandgap semiconductor with the formula Ga2O3. It is actively studied for applications in power electronics, phosphors, and gas sensing. The compound has several polymorphs, of which the monoclinic β-phase is the most stable. The β-phase’s bandgap of 4.7–4.9 eV and large-area, native substrates make it a promising competitor to GaN and SiC-based power electronics applications and solar-blind UV photodetectors. The orthorhombic ĸ-Ga2O3 is the second most stable polymorph. The ĸ-phase has shown instability of subsurface doping density under thermal exposure. Ga2O3 exhibits reduced thermal conductivity and electron mobility by an order of magnitude compared to GaN and SiC, but is predicted to be significantly more cost-effective due to being the only wide-bandgap material capable of being grown from melt. β-Ga2O3 is thought to be radiation-hard, which makes it promising for military and space applications.

<span class="mw-page-title-main">Quantum well infrared photodetector</span>

A Quantum Well Infrared Photodetector (QWIP) is an infrared photodetector, which uses electronic intersubband transitions in quantum wells to absorb photons. In order to be used for infrared detection, the parameters of the quantum wells in the quantum well infrared photodetector are adjusted so that the energy difference between its first and second quantized states match the incoming infrared photon energy. QWIPs are typically made of gallium arsenide, a material commonly found in smartphones and high-speed communications equipment. Depending on the material and the design of the quantum wells, the energy levels of the QWIP can be tailored to absorb radiation in the infrared region from 3 to 20 µm.

Intermediate band photovoltaics in solar cell research provides methods for exceeding the Shockley–Queisser limit on the efficiency of a cell. It introduces an intermediate band (IB) energy level in between the valence and conduction bands. Theoretically, introducing an IB allows two photons with energy less than the bandgap to excite an electron from the valence band to the conduction band. This increases the induced photocurrent and thereby efficiency.

A graphene lens is an optical refraction device. Graphene's unique 2-D honeycomb contributes to its unique optical properties.

<span class="mw-page-title-main">Transient photocurrent</span> A measurement technique

Transient photocurrent (TPC) is a measurement technique, typically employed in the physics of thin film semiconductors. TPC allows to study the time-dependent extraction of charges generated by photovoltaic effect in semiconductor devices, such as solar cells.

Photoconductive polymers absorb electromagnetic radiation and produce an increase of electrical conductivity. Photoconductive polymers have been used in a wide variety of technical applications such as Xerography (electrophotography) and laser printing. Electrical conductivity is usually very small in organic compounds. Conductive polymers usually have large electrical conductivity. Photoconductive polymer is a smart material based on conductive polymer, and the electrical conductivity can be controlled by the amount of radiation.

Zinc cadmium phosphide arsenide (Zn-Cd-P-As) is a quaternary system of group II (IUPAC group 12) and group V (IUPAC group 15) elements. Many of the inorganic compounds in the system are II-V semiconductor materials. The quaternary system of II3V2 compounds, (Zn1−xCdx)3(P1−yAsy)2, has been shown to allow solid solution continuously over the whole compositional range. This material system and its subsets have applications in electronics, optoelectronics, including photovoltaics, and thermoelectrics.

Photoconductance decay or Photoconductivity decay, is a non-destructive analytical technique used to measure the lifetime of minority charge carriers in a semiconductor, especially in silicon wafers. The technique studies the transient photoconductivity of a semiconductor sample during or after it is illuminated by a light pulse. Electron–hole pairs are first generated by the light pulse, and the photoconductivity of the sample declines as the carriers recombine.

References

  1. ↑ DeWerd, L. A.; P. R. Moran (1978). "Solid-state electrophotography with Al2O3". Medical Physics. 5 (1): 23–26. Bibcode:1978MedPh...5...23D. doi:10.1118/1.594505. PMID   634229.
  2. ↑ Saghaei, Jaber; Fallahzadeh, Ali; Saghaei, Tayebeh (June 2016). "Vapor treatment as a new method for photocurrent enhancement of UV photodetectors based on ZnO nanorods". Sensors and Actuators A: Physical. 247: 150–155. doi:10.1016/j.sna.2016.05.050.
  3. 1 2 Pearsall, Thomas (2010). Photonics Essentials, 2nd edition. McGraw-Hill. ISBN   978-0-07-162935-5.
  4. ↑ Law, Kock Yee (1993). "Organic photoconductive materials: recent trends and developments". Chemical Reviews. 93: 449–486. doi:10.1021/cr00017a020.
  5. ↑ Belev, G.; Kasap, S. O. (2004-10-15). "Amorphous selenium as an X-ray photoconductor". Journal of Non-Crystalline Solids. Physics of Non-Crystalline Solids 10. 345–346: 484–488. Bibcode:2004JNCS..345..484B. doi:10.1016/j.jnoncrysol.2004.08.070. ISSN   0022-3093.
  6. ↑ Weiss, David S.; Abkowitz, Martin (2010-01-13). "Advances in Organic Photoconductor Technology". Chemical Reviews. 110 (1): 479–526. doi:10.1021/cr900173r. ISSN   0009-2665. PMID   19848380.
  7. ↑ Cai, Wensi; Li, Haiyun; Li, Mengchao; Wang, Meng; Wang, Huaxin; Chen, Jiangzhao; Zang, Zhigang (2021-05-13). "Opportunities and challenges of inorganic perovskites in high-performance photodetectors". Journal of Physics D: Applied Physics. 54 (29): 293002. Bibcode:2021JPhD...54C3002C. doi:10.1088/1361-6463/abf709. ISSN   0022-3727. S2CID   234883317.
  8. ↑ Aragoni, M. Carla; Arca, Massimiliano; Devillanova, Francesco A.; Isaia, Francesco; Lippolis, Vito; Mancini, Annalisa; Pala, Luca; Verani, Gaetano; Agostinelli, Tiziano; Caironi, Mario; Natali, Dario (2007-02-01). "First example of a near-IR photodetector based on neutral [M(R-dmet)2] bis(1,2-dithiolene) metal complexes". Inorganic Chemistry Communications. 10 (2): 191–194. doi:10.1016/j.inoche.2006.10.019. ISSN   1387-7003.
  9. ↑ Pintus, Anna; Ambrosio, Lucia; Aragoni, M. Carla; Binda, Maddalena; Coles, Simon J.; Hursthouse, Michael B.; Isaia, Francesco; Lippolis, Vito; Meloni, Giammarco; Natali, Dario; Orton, James B. (2020-05-04). "Photoconducting Devices with Response in the Visible–Near-Infrared Region Based on Neutral Ni Complexes of Aryl-1,2-dithiolene Ligands". Inorganic Chemistry. 59 (9): 6410–6421. doi:10.1021/acs.inorgchem.0c00491. ISSN   0020-1669. PMID   32302124. S2CID   215809603.
  10. ↑ Hernández-Acosta, M A; Trejo-Valdez, M; Castro-Chacón, J H; Torres-San Miguel, C R; Martínez-Gutiérrez, H; Torres-Torres, C (23 February 2018). "Chaotic signatures of photoconductive Cu ZnSnS nanostructures explored by Lorenz attractors". New Journal of Physics. 20 (2): 023048. Bibcode:2018NJPh...20b3048H. doi: 10.1088/1367-2630/aaad41 .
  11. ↑ Rose, Albert (1963). Photoconductivity and Allied Problems. Interscience tracts on physics and astronomy. Wiley Interscience. ISBN   0-88275-568-4.
  12. ↑ N V Joshi (25 May 1990). Photoconductivity: Art: Science & Technology. CRC Press. ISBN   978-0-8247-8321-1.
  13. ↑ Staebler, D. L.; Wronski, C. R. (1977). "Reversible conductivity changes in discharge-produced amorphous Si". Applied Physics Letters. 31 (4): 292. Bibcode:1977ApPhL..31..292S. doi:10.1063/1.89674. ISSN   0003-6951.
  14. 1 2 3 Javadi, Mohammad; Abdi, Yaser (2018-07-30). "Frequency-driven bulk-to-surface transition of conductivity in ZnO nanowires". Applied Physics Letters. 113 (5): 051603. doi:10.1063/1.5039474. ISSN   0003-6951.
  15. ↑ Serpi, A. (1992). "Negative Photoconductivity in MoS2". Physica Status Solidi A. 133 (2): K73–K77. Bibcode:1992PSSAR.133...73S. doi:10.1002/pssa.2211330248. ISSN   0031-8965.
  16. ↑ Heyman, J. N.; Stein, J. D.; Kaminski, Z. S.; Banman, A. R.; Massari, A. M.; Robinson, J. T. (2015). "Carrier heating and negative photoconductivity in graphene". Journal of Applied Physics. 117 (1): 015101. arXiv: 1410.7495 . Bibcode:2015JAP...117a5101H. doi:10.1063/1.4905192. ISSN   0021-8979. S2CID   118531249.
  17. ↑ Alexander-Webber, Jack A.; Groschner, Catherine K.; Sagade, Abhay A.; Tainter, Gregory; Gonzalez-Zalba, M. Fernando; Di Pietro, Riccardo; Wong-Leung, Jennifer; Tan, H. Hoe; Jagadish, Chennupati (2017-12-11). "Engineering the Photoresponse of InAs Nanowires". ACS Applied Materials & Interfaces. 9 (50): 43993–44000. doi: 10.1021/acsami.7b14415 . hdl: 1885/237356 . ISSN   1944-8244. PMID   29171260.
  18. ↑ Jiménez-Marín, E.; Villalpando, I.; Trejo-Valdez, M.; Cervantes-Sodi, F.; Vargas-García, J. R.; Torres-Torres, C. (2017-06-01). "Coexistence of positive and negative photoconductivity in nickel oxide decorated multiwall carbon nanotubes". Materials Science and Engineering: B. 220: 22–29. doi:10.1016/j.mseb.2017.03.004. ISSN   0921-5107.
  19. ↑ Nakanishi, Hideyuki; Bishop, Kyle J. M.; Kowalczyk, Bartlomiej; Nitzan, Abraham; Weiss, Emily A.; Tretiakov, Konstantin V.; Apodaca, Mario M.; Klajn, Rafal; Stoddart, J. Fraser; Grzybowski, Bartosz A. (2009). "Photoconductance and inverse photoconductance in films of functionalized metal nanoparticles". Nature. 460 (7253): 371–375. Bibcode:2009Natur.460..371N. doi:10.1038/nature08131. ISSN   0028-0836. PMID   19606145. S2CID   4425298.
  20. 1 2 Náfrádi, Bálint (24 November 2016). "Optically switched magnetism in photovoltaic perovskite CH3NH3(Mn:Pb)I3". Nature Communications. 7 (13406): 13406. arXiv: 1611.08205 . Bibcode:2016NatCo...713406N. doi:10.1038/ncomms13406. PMC   5123013 . PMID   27882917.
  21. ↑ "RSC Definition - Photocurrent spectroscopy". RSC. Retrieved 2020-07-19.
  22. ↑ Lamberti, Carlo; Agostini, Giovanni (2013). "15.3 - Photocurrent spectroscopy". Characterization of Semiconductor Heterostructures and Nanostructures (2 ed.). Italy: Elsevier. pp. 652–655. doi:10.1016/B978-0-444-59551-5.00001-7. ISBN   978-0-444-59551-5.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.