Plaxton Verde | |
---|---|
Overview | |
Manufacturer | Plaxton |
Production | 1991–1997 |
Assembly | Scarborough, North Yorkshire, England |
Body and chassis | |
Doors | 1 or 2 |
Floor type | Step entrance |
Chassis | Dennis Lance Volvo B10B DAF SB220 Scania N113 |
Powertrain | |
Engine | Cummins C series (Dennis Lance) Scania DSC11 (Scania N113) DAF LT160 (DAF SB220) Volvo THD103 KB (Volvo B10B) |
Capacity | 35 to 50 seated |
Dimensions | |
Length | 10.1–12.5 metres (33–41 ft) |
Width | 2.5 metres (8 ft 2 in) |
Height | 3.0 metres (9.8 ft) |
The Plaxton Verde was a step-entrance full-size single-decker bus body built by Plaxton between 1991 and 1997. It was built on a rear-engined chassis, the most popular of which was the Dennis Lance which accounted for over half of the Verdes built. The rest were on Volvo B10B, DAF SB220 and Scania N113 chassis.
Launched in March 1991 as part of Plaxton's move away from traditional coach body manufacturing, with ambitions to export the model to Continental Europe, the Plaxton Verde has an aluminium structure and flat-sided, boxy shape, similar to that of the manufacturer's Pointer midibus. The front end of the bus, however, differs from the Pointer by having a distinctive "barrel-curvature" windscreen plus four headlights instead of the Pointer's two. [1]
On early vehicles (primarily the Scania N113s and DAF SB220s), the side windows have rounded corners and the quarterlights extend below the windscreen. Later-built vehicles have square-cornered windows, an enlarged cab side window with an angled corner like that on the Pointer, and the lower edge of the quarterlights level with that of the windscreen and of the cab window. Minor alterations were also made to the front dash panel. Verdes were identified by the letter L in Plaxton's post-1989 body numbering system.
Sales of the Verde body initially proved very slow, with only two demonstrators produced by Plaxton during 1991. [2] A year after the Verde was launched, Cardiff Bus became the first bus operator in the United Kingdom to take delivery of the type, ordering 14 on Scania N113CRB chassis that were delivered in February 1992. [3] These were followed in October 1993 by the delivery of ten Verdes on Dennis Lance chassis to South Wales Transport. [4]
The first large operator to order Verdes was Dublin Bus, who took delivery of forty dual-door Plaxton Verdes on DAF SB220 chassis in 1992, entering service as the P class to introduce a new high-frequency brand known as 'CitySwift'. These Verdes received a number of modifications, mainly centred around the cab layout and overall strength, in order to be certified to Irish and European Economic Community standards. [5] Throughout their service life, however, Dublin Bus' Verdes were plagued with structural problems and would return to Plaxton's Scarborough factory more than once for remedial treatment.
The largest overall operator of Plaxton Verdes was the Badgerline Group, taking large numbers of the type on Dennis Lance chassis between 1993 and 1996 for its Midland Red West and Yorkshire Rider subsidiaries. [6] Yorkshire Rider took delivery of a total 78 Verdes between 1995 and 1996, a majority of which were delivered to Huddersfield for 'Flagship' services, [7] [8] with a further 30 delivered under FirstBus for the rebranded Leeds City Link operation. [9]
The Oxford Bus Company took delivery of 43 Verdes on Volvo B10B chassis, the first four of which were diverted from an order for eight for fellow Go-Ahead Group subsidiary Go-Ahead Gateshead, [10] [11] [8] while London Buses subsidiary Selkent's Catford garage took delivery of twelve dual-door Verdes on Dennis Lance chassis in 1994 for use on London Buses route 208. [12] [ better source needed ] Other operators of Plaxton Verdes included Cleveland Transit on the Volvo B10B chassis, as well as Busways Travel Services, Clydeside 2000, North Western, Nottingham City Transport and Potteries Motor Traction on the Dennis Lance chassis.[ citation needed ]
The Scania N113 was a transverse-engined step-entrance and low-floor city bus chassis manufactured by Scania between 1988 and 2000.
The Alexander ALX200 was a single-decker bus body built by Alexander of the United Kingdom. It was created for low-floor bus chassis produced from the late 1990s and was launched in spring 1996 as a low-floor replacement of the Alexander Dash. It was marketed in Alexander's 'ALX' series to fill in the gap between the ALX100 minibus and the ALX300 full-size single-decker.
The Alexander ALX400 was a 2-axle double-decker bus body built by Walter Alexander Coachbuilders. It was one of the ALX-series bodywork, all of which featured the same designs on the front and rear panels that were originally designed for the new generation of mainly low-floor bus chassis produced since the late 1990s.
The Plaxton President was a low floor double-decker bus body built by Plaxton at the former Northern Counties factory in Wigan, England. It was first unveiled in 1997 on the longitudinal Volvo B7L chassis and later built between 1998 and 2005 following a body redesign. When it became part of TransBus International, the body was sold under the TransBus name. The President was built on the Dennis/TransBus Trident, the DAF DB250 and the Volvo B7TL chassis.
Duple Coachbuilders was a coach and bus bodybuilder in England from 1919 until 1989.
Arriva Scotland West was a bus company based in Inchinnan, near Paisley, Scotland. It was formed in 1997 as a rebranding of the former Clydeside 2000 company when purchased by Arriva. On 26 March 2012, the business was sold to McGill's Bus Services.
Southdown PSV Limited, which traded as Southdown Buses, was a medium-sized country bus operator, with 18 routes across East Surrey, West Sussex, South London and Kent, 9 of which were school bus routes. Most of their routes were operated on behalf of Surrey County Council, other work included railway replacement services for planned engineering work.
The Plaxton Elite is a coach body produced by the British bus and coach manufacturer Plaxton. It is primarily targeted at the premium touring market and went into production in late 2008, replacing Plaxton's pre-existing Paragon and Profile coach bodies.
The Plaxton Paramount was a design of coach bodywork built by Plaxton. It first appeared at the 1982 British Motor Show and was built until 1992.
The Plaxton Prestige is a low-floor single-decker bus body built by manufacturers Northern Counties and Plaxton between 1996 and 1999.
The Northern Counties Paladin, also badged as the Plaxton Paladin towards the end of production, is a step-entrance single-decker bus body built by Northern Counties of Wigan, UK, between 1991 and 1998. The replacements for the Paladin are the Prestige and the Pointer as low-floor models for the Paladin LF.
The Northern Counties Palatine was a step-entrance 2-axle and 3-axle double-decker bus body built by Northern Counties from 1988 to 1999 in Wigan, England.
The Wright Endurance was a step-entrance single-decker bus body on Scania N113 and on Volvo B10B chassis by Wrightbus between 1992 and 1997.
A single-decker bus or single-decker is a bus that has a single deck for passengers. Normally the use of the term single-decker refers to a standard two-axled rigid bus, in direct contrast to the use of the term double-decker bus, which is essentially a bus with two passenger decks and a staircase. These types of single-deckers may feature one or more doors, and varying internal combustion engine positions. The majority of single-deckers have a length of up to 12 metres, although some exceptions of longer buses exist. They also typically weigh between 11 and 14 tons.
The Alexander PS-type was a step-floor single-decker bus body built by Walter Alexander Coachbuilders in Falkirk, Scotland and was produced from 1988 to the late 1990s predominantly on the Dennis Lance, Mercedes-Benz O405, Scania N113, Volvo B10M chassis.
The Plaxton Pointer is a single-deck midibus body that was manufactured between 1991 and 2006, predominantly on the Dennis Dart chassis, by Reeve Burgess, Plaxton and latterly Alexander Dennis.
The Alexander Dash is a step-entrance midibus body built by Walter Alexander Coachbuilders of Scotland from 1991 to 1997. Unveiled by Alexander at the 1991 Coach and Bus exhibition in Birmingham, it was one of the variants of Alexander's AM-type body, also using components from the Alexander PS type, and was usually combined with the Dennis Dart and Volvo B6 step-entrance single-decker bus chassis.
The Volvo B10B was a rear-engined step deck single-decker bus chassis manufactured by Volvo between 1992 and 2001. The first prototype were built in 1990, but the B10B wasn't launched until the 1992 Geneva Motor Show. It superseded the Leyland Lynx and Volvo B10R. For stage use it was gradually succeeded by the low-entry B10BLE, which was introduced only a year later, though not in all markets. For interurban use the B7R came as a gradual replacement in 1998, and ultimately for coach work, the B12B took over in 2001.
The Duple 300 Series were a range of bus and coach bodywork built by Duple between 1985 and 1989. The range comprised the 3,000 mm high Duple 300 service bus, the 3,200 mm high Duple 320 coach, and the taller 3,400 mm high Duple 340 coach. The 320 and 340 coaches were announced at the Bus and Coach Show at Earls Court in September 1985 as replacements for the previous Laser and Caribbean. Deliveries of these models commenced in 1986, whilst the 300 bus was launched in 1987 as a replacement for the Dominant Bus. After Duple closed down the designs were sold to Plaxton and a small number of additional 320 bodies were built as the Plaxton 321.
Under Matthews's chairmanship, Plaxton tried to reduce its dependence on the UK luxury coach market and launched the Verde city bus body last March. But the Verde has sold exceptionally slowly.
Yorkshire Rider has become Britain's biggest Plaxton Verde user, with the delivery of 48 on Dennis Lance chassis. And the Gateshead-based Go-Ahead Group has joined the growing list of Verde customers, with an order for 30 on the Volvo Bus Chassis.
The order includes the delivery of 30 Dennis Lance single-deck buses with Plaxton Verde bodywork and 30 9.8 metre Dennis Darts with Plaxton Pointer bodies.
Media related to Plaxton Verde at Wikimedia Commons