Plaxton Primo

Last updated

Plaxton Primo
Carters Coach Services bus (BU08 ACV), Felixstowe, 2 May 2010.jpg
Carters Plaxton Primo in Felixstowe in 2010
Overview
Manufacturer Plaxton
Production2005–2010
Assembly Scarborough, England
Body and chassis
Doors1
Floor type Low floor
ChassisEnterprise Bus Plasma
Powertrain
Engine Cummins ISBe
Capacity27 Seated, 16 Standing
43 passengers
Power output138 bhp @ 2500 rpm
Transmission Allison 2000 Series 5-speed automatic
Dimensions
Length7.9 m (26 ft)
Width2.4 m (7 ft 10 in)
Height2.73 m (8 ft 11 in)
Curb weight 3,500 to 12,000 kg (7,700 to 26,500 lb)

The Plaxton Primo was a low-floor minibus body manufactured by Plaxton on the Enterprise Bus Plasma chassis between 2005 and 2010.

Contents

Design

Rear of a Countryliner Plaxton Primo in Woking, Surrey in 2009 Countryliner PP1 KX06 LYP rear.JPG
Rear of a Countryliner Plaxton Primo in Woking, Surrey in 2009

Launched in 2005, the Plaxton Primo body is the result of close cooperation between Enterprise Bus, the Hungarian chassis manufacturer, and Plaxton. The fully welded stainless steel integral chassis is supplied in right hand drive format as a running unit to Plaxton, with the final body assembly undertaken at their factory in Scarborough, England; the body and chassis design is also available in both single-leaf and two-door left hand drive form in Continental Europe. Much of the design of the Primo was also influenced the styling of the larger Centro. [1]

The Plaxton Primo was originally intended to replace the Plaxton Beaver body, built on the Mercedes-Benz Vario chassis, but pressure from small operators such as Western Greyhound persuaded Plaxton to continue the Beaver, as the larger Primo could not fit down narrow roads that the Vario was suited to.[ citation needed ]

In 2008, Plaxton announced the Primo 2 with a number of modifications.[ specify ] The Primos in service were also modified to Mk2 form to enhance reliability.[ citation needed ]

Operators

The Primo proved particularly popular with independent bus operators in England and Wales. The first two Primos were delivered to TM Travel of Halfway, Sheffield between late 2005 and early 2006. Some of the first Primos produced were distributed via Mistral Bus & Coach, which took delivery of a total of 25 for its rental business during 2006. [1] Six were delivered to East Yorkshire Motor Services in July 2006 for use on local services in Bridlington, [2] while another major customer for Primos towards the end of its production was Reays of Wigton, taking delivery of fourteen Primos during 2010. [3] [ better source needed ]

See also

Related Research Articles

Plaxton is an English builder of bus and coach vehicle bodies based in Eastfield, North Yorkshire, England. Founded in 1907 by Frederick William Plaxton, it became a subsidiary of Alexander Dennis in May 2007. In 2019, the maker was acquired by Canadian bus manufacturer New Flyer which then became NFI Group.

<span class="mw-page-title-main">Dennis Dart</span> British rear-engined single-decker midibus

The Dennis Dart is a rear-engined single-decker midibus chassis that was introduced by Dennis of Guildford, England in 1989, replacing the Dennis Domino. Initially built as a high-floor design, in 1996 the low-floor second generation Dennis Dart SLF was launched. In 2001, production of the Dart SLF passed to TransBus International, during which time it was sold as the TransBus Dart SLF; Alexander Dennis took over production in 2004, renaming the product as the Alexander Dennis Dart SLF.

<span class="mw-page-title-main">Volvo B7TL</span> Low-floor longitudinal double-decker bus chassis

The Volvo B7TL is a low-floor double-decker bus chassis which was launched in 1999 and replaced the 2-axle version of the Volvo Olympian. It was built as the British bus operators seemed hesitant to purchase the B7L double decker with a long rear overhang.

<span class="mw-page-title-main">Alexander ALX400</span> 2-axle double decker bus body

The Alexander ALX400 was a 2-axle double-decker bus body built by Walter Alexander Coachbuilders. It was one of the ALX-series bodywork, all of which featured the same designs on the front and rear panels that were originally designed for the new generation of mainly low-floor bus chassis produced since the late 1990s.

<span class="mw-page-title-main">Plaxton President</span> 2-axle low-floor double-decker bus body

The Plaxton President was a low floor double-decker bus body built by Plaxton at the former Northern Counties factory in Wigan, England. It was first unveiled in 1997 on the longitudinal Volvo B7L chassis and later built between 1998 and 2005 following a body redesign. When it became part of TransBus International, the body was sold under the TransBus name. The President was built on the Dennis/TransBus Trident, the DAF DB250 and the Volvo B7TL chassis.

<span class="mw-page-title-main">Alexander Dennis Enviro400</span> British-built double-decker bus (built 2005–2018)

The Alexander Dennis Enviro400 is a twin-axle low-floor double-decker bus that was built by the British bus manufacturer Alexander Dennis between 2005 and 2018. It replaced the Alexander ALX400, Dennis Trident and Plaxton President. In 2014, the Enviro400 was succeeded by the updated Alexander Dennis Enviro400 MMC and production of the classic Enviro400 ceased in 2018.

<span class="mw-page-title-main">VDL DB250</span> Twin-axle double-decker bus chassis

The VDL DB250 was a twin-axle double-decker bus chassis manufactured by VDL Bus & Coach.

<span class="mw-page-title-main">Wright Eclipse Gemini</span> Low-floor double-decker bus body

The Wright Eclipse Gemini is a low-floor double-decker bus body that was built by Wrightbus since 2001, based on the single-decker Wright Eclipse design. The second-generation Eclipse Gemini 2 was launched in 2009, followed by the third-generation Gemini 3 in 2013. Additionally, the body was available on Volvo Super Olympian chassis in Hong Kong between 2003 and 2005, marketed as the Wright Explorer.

<span class="mw-page-title-main">Mercedes-Benz Vario</span> Full-size commercial heavy van and bus

The Mercedes-Benz Vario is a full-size commercial heavy van and medium duty truck manufactured by Mercedes-Benz between 1996 and 2013.

<span class="mw-page-title-main">Reeve Burgess</span>

Reeve Burgess was a bus body manufacturer based in Pilsley, North East Derbyshire in the United Kingdom. It was a subsidiary of Plaxton from 1980 until its closure in 1991.

<span class="mw-page-title-main">Dennis Lance</span> Step-entrance and low-floor single-deck bus chassis

The Dennis Lance was a single-decker bus chassis manufactured by Dennis between 1991 and 2000, replacing the Dennis Falcon. Its low floor variant, the Dennis Lance SLF was built between 1993 and 1996. Between 1995 and 1998, Dennis also built its double-deck variant, the Dennis Arrow, as the replacement of the Dennis Dominator.

<span class="mw-page-title-main">East Lancs Myllennium</span> Type of single-decker bus body

The East Lancs Myllennium was a type of single-decker bus body manufactured by East Lancashire Coachbuilders on DAF SB220, Dennis Dart SLF, MAN 14.220 and Scania N94UB chassis. It was superseded by the East Lancs Esteem in 2006.

<span class="mw-page-title-main">Plaxton Elite</span> Step-entrance coach body on Volvo and Scania chassis

The Plaxton Elite is a coach body produced by the British bus and coach manufacturer Plaxton. It is primarily targeted at the premium touring market and went into production in late 2008, replacing Plaxton's pre-existing Paragon and Profile coach bodies.

<span class="mw-page-title-main">Plaxton Verde</span> Step-entrance single-deck bus body

The Plaxton Verde was a step-entrance full-size single-decker bus body built by Plaxton between 1991 and 1997. It was built on a rear-engined chassis, the most popular of which was the Dennis Lance which accounted for over half of the Verdes built. The rest were on Volvo B10B, DAF SB220 and Scania N113 chassis.

<span class="mw-page-title-main">Plaxton Prestige</span> Low-floor bus body on DAF SB220 and Volvo B10BLE chassis

The Plaxton Prestige is a low-floor single-decker bus body built by manufacturers Northern Counties and Plaxton between 1996 and 1999.

<span class="mw-page-title-main">Plaxton Beaver</span> Motor vehicle

The Plaxton Beaver, originally known as the Reeve Burgess Beaver, is a minibus body built by Plaxton. It was built at the Pilsley, Derbyshire factory of Plaxton's Reeve Burgess subsidiary from 1987 to 1991, at Plaxton's main Scarborough factory from 1991, and from 1995 at Anston in South Yorkshire.

<span class="mw-page-title-main">Northern Counties Palatine</span> Step-entrance double-decker bus body

The Northern Counties Palatine was a step-entrance 2-axle and 3-axle double-decker bus body built by Northern Counties from 1988 to 1999 in Wigan, England.

<span class="mw-page-title-main">Plaxton Pointer</span> Single-deck midibus body built on Dennis and Volvo chassis

The Plaxton Pointer is a single-deck midibus body that was manufactured between 1991 and 2006, predominantly on the Dennis Dart chassis, by Reeve Burgess, Plaxton and latterly Alexander Dennis.

<span class="mw-page-title-main">Bristol LH</span> Motor vehicle

The Bristol LH was a single-decker bus chassis built by Bristol Commercial Vehicles (BCV) in Bristol, England. Nearly 2,000 were built between 1967 and 1982 in a variety of sizes and body types, including some as goods vehicles.

<span class="mw-page-title-main">Plaxton Cheetah</span> Motor vehicle

The Plaxton Cheetah is a minibus/midibus body manufactured by Plaxton in Wigan, England. Between 1997 and 2014 it was mounted on Mercedes-Benz Vario chassis.

References

  1. 1 2 "Plaxton Primo unveiled". Bus & Coach Professional. 16 September 2005. Archived from the original on 2 March 2014. Retrieved 10 February 2014.
  2. "EYMS: Six new accessible Plaxton Primos". Bus & Coach Professional. 1 August 2006. Archived from the original on 11 November 2007. Retrieved 25 May 2024.
  3. "Reays give freebies to waiting passengers". Coach & Bus Week . Peterborough. 10 January 2012. Retrieved 25 May 2024.