Profit maximization

Last updated
An example diagram of Profit Maximization: In the supply and demand graph, the output of
Q
*
{\displaystyle Q^{*}}
is the intersection point of
MR
{\displaystyle {\text{MR}}}
(Marginal Revenue) and
MC
{\displaystyle {\text{MC}}}
(Marginal Cost), where
MR
=
MC
{\displaystyle {\text{MR}}={\text{MC}}}
. The firm which produces at this output level is said to maximize profits. If the output produced is less than the equilibrium quantity (
Q
*
{\displaystyle Q^{*}}
), as shown in the red part, then
MR
{\displaystyle {\text{MR}}}
is greater than
MC
{\displaystyle {\text{MC}}}
(
MR
>
MC
{\displaystyle {\text{MR}}>{\text{MC}}}
), and the profit is not maximized. The firm has in its interest to raise its output level to maximize profits, because the revenue gained will be more than the cost to pay. However, if the output level is greater than
Q
*
{\displaystyle Q^{*}}
(
MR
<
MC
{\displaystyle {\text{MR}}<{\text{MC}}}
), as shown in the blue part, the firm's overall profit will decrease because the additional unit produced will increase the overall cost. Here too the profit is not maximized and the firm has to lower its output level to maximize profits. Profit Maximisation.jpg
An example diagram of Profit Maximization: In the supply and demand graph, the output of is the intersection point of (Marginal Revenue) and (Marginal Cost), where . The firm which produces at this output level is said to maximize profits. If the output produced is less than the equilibrium quantity (), as shown in the red part, then is greater than (), and the profit is not maximized. The firm has in its interest to raise its output level to maximize profits, because the revenue gained will be more than the cost to pay. However, if the output level is greater than (), as shown in the blue part, the firm's overall profit will decrease because the additional unit produced will increase the overall cost. Here too the profit is not maximized and the firm has to lower its output level to maximize profits.

In economics, profit maximization is the short run or long run process by which a firm may determine the price, input and output levels that will lead to the highest possible total profit (or just profit in short). In neoclassical economics, which is currently the mainstream approach to microeconomics, the firm is assumed to be a "rational agent" (whether operating in a perfectly competitive market or otherwise) which wants to maximize its total profit, which is the difference between its total revenue and its total cost.

Contents

Measuring the total cost and total revenue is often impractical, as the firms do not have the necessary reliable information to determine costs at all levels of production. Instead, they take more practical approach by examining how small changes in production influence revenues and costs. When a firm produces an extra unit of product, the additional revenue gained from selling it is called the marginal revenue (), and the additional cost to produce that unit is called the marginal cost (). When the level of output is such that the marginal revenue is equal to the marginal cost (), then the firm's total profit is said to be maximized. If the marginal revenue is greater than the marginal cost (), then its total profit is not maximized, because the firm can produce additional units to earn additional profit. In other words, in this case, it is in the "rational" interest of the firm to increase its output level until its total profit is maximized. On the other hand, if the marginal revenue is less than the marginal cost (), then too its total profit is not maximized, because producing one unit less will reduce total cost more than total revenue gained, thus giving the firm more total profit. In this case, a "rational" firm has an incentive to reduce its output level until its total profit is maximized. [1]

There are several perspectives one can take on profit maximization. First, since profit equals revenue minus cost, one can plot graphically each of the variables revenue and cost as functions of the level of output and find the output level that maximizes the difference (or this can be done with a table of values instead of a graph). Second, if specific functional forms are known for revenue and cost in terms of output, one can use calculus to maximize profit with respect to the output level. Third, since the first order condition for the optimization equates marginal revenue and marginal cost, if marginal revenue () and marginal cost () functions in terms of output are directly available one can equate these, using either equations or a graph. Fourth, rather than a function giving the cost of producing each potential output level, the firm may have input cost functions giving the cost of acquiring any amount of each input, along with a production function showing how much output results from using any combination of input quantities. In this case one can use calculus to maximize profit with respect to input usage levels, subject to the input cost functions and the production function. The first order condition for each input equates the marginal revenue product of the input (the increment to revenue from selling the product caused by an increment to the amount of the input used) to the marginal cost of the input.

For a firm in a perfectly competitive market for its output, the revenue function will simply equal the market price times the quantity produced and sold, whereas for a monopolist, which chooses its level of output simultaneously with its selling price. In the case of monopoly, the company will produce more products because it can still make normal profits. To get the most profit, you need to set higher prices and lower quantities than the competitive market. However, the revenue function takes into account the fact that higher levels of output require a lower price in order to be sold. An analogous feature holds for the input markets: in a perfectly competitive input market the firm's cost of the input is simply the amount purchased for use in production times the market-determined unit input cost, whereas a monopsonist’s input price per unit is higher for higher amounts of the input purchased.

The principal difference between short run and long run profit maximization is that in the long run the quantities of all inputs, including physical capital, are choice variables, while in the short run the amount of capital is predetermined by past investment decisions. In either case, there are inputs of labor and raw materials.

Basic definitions

Any costs incurred by a firm may be classified into two groups: fixed costs and variable costs. Fixed costs, which occur only in the short run, are incurred by the business at any level of output, including zero output. These may include equipment maintenance, rent, wages of employees whose numbers cannot be increased or decreased in the short run, and general upkeep. Variable costs change with the level of output, increasing as more product is generated. Materials consumed during production often have the largest impact on this category, which also includes the wages of employees who can be hired and laid off in the short run span of time under consideration. Fixed cost and variable cost, combined, equal total cost.

Revenue is the amount of money that a company receives from its normal business activities, usually from the sale of goods and services (as opposed to monies from security sales such as equity shares or debt issuances).

The five ways formula is to increase leads, conversation rates, average dollar sales, the average number of sales, and average product profit. Profits can be increased by up to 1,000 percent, this is important for sole traders and small businesses let alone big businesses but none the less all profit maximization is a matter of each business stage and greater returns for profit sharing thus higher wages and motivation. [2] [ full citation needed ]

Marginal cost and marginal revenue, depending on whether the calculus approach is taken or not, are defined as either the change in cost or revenue as each additional unit is produced or the derivative of cost or revenue with respect to the quantity of output. For instance, taking the first definition, if it costs a firm $400 to produce 5 units and $480 to produce 6, the marginal cost of the sixth unit is 80 dollars. Conversely, the marginal income from the production of 6 units is the income from the production of 6 units minus the income from the production of 5 units (the latter item minus the preceding item).

Total revenue – total cost perspective

Profit maximization using the total revenue and total cost curves of a perfect competitor Profit max total small.svg
Profit maximization using the total revenue and total cost curves of a perfect competitor

To obtain the profit maximizing output quantity, we start by recognizing that profit is equal to total revenue () minus total cost (). Given a table of costs and revenues at each quantity, we can either compute equations or plot the data directly on a graph. The profit-maximizing output is the one at which this difference reaches its maximum.

In the accompanying diagram, the linear total revenue curve represents the case in which the firm is a perfect competitor in the goods market, and thus cannot set its own selling price. The profit-maximizing output level is represented as the one at which total revenue is the height of and total cost is the height of ; the maximal profit is measured as the length of the segment . This output level is also the one at which the total profit curve is at its maximum.

If, contrary to what is assumed in the graph, the firm is not a perfect competitor in the output market, the price to sell the product at can be read off the demand curve at the firm's optimal quantity of output. This optimal quantity of output is the quantity at which marginal revenue equals marginal cost.

Marginal revenue – marginal cost perspective

Profit maximization using the marginal revenue and marginal cost curves of a perfect competitor Profit max marginal small.png
Profit maximization using the marginal revenue and marginal cost curves of a perfect competitor
Price setting by a monopolist Monopoly-surpluses.svg
Price setting by a monopolist

An equivalent perspective relies on the relationship that, for each unit sold, marginal profit () equals marginal revenue () minus marginal cost (). Then, if marginal revenue is greater than marginal cost at some level of output, marginal profit is positive and thus a greater quantity should be produced, and if marginal revenue is less than marginal cost, marginal profit is negative and a lesser quantity should be produced. At the output level at which marginal revenue equals marginal cost, marginal profit is zero and this quantity is the one that maximizes profit. [3] Since total profit increases when marginal profit is positive and total profit decreases when marginal profit is negative, it must reach a maximum where marginal profit is zero—where marginal cost equals marginal revenue—and where lower or higher output levels give lower profit levels. [3] In calculus terms, the requirement that the optimal output have higher profit than adjacent output levels is that: [3]

The intersection of and is shown in the next diagram as point . If the industry is perfectly competitive (as is assumed in the diagram), the firm faces a demand curve () that is identical to its marginal revenue curve (), and this is a horizontal line at a price determined by industry supply and demand. Average total costs are represented by curve . Total economic profit is represented by the area of the rectangle . The optimum quantity () is the same as the optimum quantity in the first diagram.

If the firm is a monopolist, the marginal revenue curve would have a negative slope as shown in the next graph, because it would be based on the downward-sloping market demand curve. The optimal output, shown in the graph as , is the level of output at which marginal cost equals marginal revenue. The price that induces that quantity of output is the height of the demand curve at that quantity (denoted ).

A generic derivation of the profit maximisation level of output is given by the following steps. Firstly, suppose a representative firm has perfect information about its profit, given by:

where denotes total revenue and denotes total costs. The above expression can be re-written as:

where denotes price (marginal revenue), quantity, and marginal cost. The firm maximises their profit with respect to quantity to yield the profit maximisation level of output:

As such, the profit maximisation level of output is marginal revenue equating to marginal cost .

In an environment that is competitive but not perfectly so, more complicated profit maximization solutions involve the use of game theory.

Case in which maximizing revenue is equivalent

In some cases a firm's demand and cost conditions are such that marginal profits are greater than zero for all levels of production up to a certain maximum. [4] In this case marginal profit plunges to zero immediately after that maximum is reached; hence the rule implies that output should be produced at the maximum level, which also happens to be the level that maximizes revenue. [4] In other words, the profit-maximizing quantity and price can be determined by setting marginal revenue equal to zero, which occurs at the maximal level of output. Marginal revenue equals zero when the total revenue curve has reached its maximum value. An example would be a scheduled airline flight. The marginal costs of flying one more passenger on the flight are negligible until all the seats are filled. The airline would maximize profit by filling all the seats.

Maximizing profits in the real world

In the real world, it is not easy to achieve profit maximization. The company must accurately know the marginal income and the marginal cost of the last commodity sold because of MR.

The price elasticity of demand for goods depends on the response of other companies. When it is the only company raising prices, demand will be elastic. If one family raises prices and others follow, demand may be inelastic.

Companies can seek to maximize profits through estimation. When the price increase leads to a small decline in demand, the company can increase the price as much as possible before the demand becomes elastic. Generally, it is difficult to change the impact of the price according to the demand, because the demand may occur due to many other factors besides the price.

The company may also have other goals and considerations. For example, companies may choose to earn less than the maximum profit in pursuit of higher market share. Because price increases maximize profits in the short term, they will attract more companies to enter the market.

Many companies try to minimize costs by shifting production to foreign locations with cheap labor (e.g. Nike, Inc.). However, moving the production line to a foreign location may cause unnecessary transportation costs. Close market locations for producing and selling products can improve demand optimization, but when the production cost is much higher, it is not a good choice.

Tools

Profit analysis
Habitually recording and analyzing the business costs of all products/services sold. There are many miscellaneous items in the cost including labor, materials, transportation, advertising, storage, etc. related to any goods or services sold, which become expenses.
Business intelligence tools
may be needed to integrate all financial information to record expense reports so that the business can clearly understand all costs related to operations and their accuracy.
Planning and actual execution
when implementing a "what if" solution to help in sales and operation planning process, familiarity with the company's operations, including the supply chain, inventory management and sales process is useful. Constraints are required to prevent corporate plans from becoming unfeasible.

Changes in total costs and profit maximization

A firm maximizes profit by operating where marginal revenue equals marginal cost. This is stipulated under neoclassical theory, in which a firm maximizes profit in order to determine a level of output and inputs, which provides the price equals marginal cost condition. [5] [ full citation needed ] In the short run, a change in fixed costs has no effect on the profit maximizing output or price. [6] The firm merely treats short term fixed costs as sunk costs and continues to operate as before. [7] This can be confirmed graphically. Using the diagram illustrating the total cost–total revenue perspective, the firm maximizes profit at the point where the slopes of the total cost line and total revenue line are equal. [4] An increase in fixed cost would cause the total cost curve to shift up rigidly by the amount of the change. [4] There would be no effect on the total revenue curve or the shape of the total cost curve. Consequently, the profit maximizing output would remain the same. This point can also be illustrated using the diagram for the marginal revenue–marginal cost perspective. A change in fixed cost would have no effect on the position or shape of these curves. [4] In simple terms, although profit is related to total cost, , the enterprise can maximize profit by producing to the maximum profit (the maximum value of ) to maximize profit. But when the total cost increases, it does not mean maximizing profit Will change, because the increase in total cost does not necessarily change the marginal cost. If the marginal cost remains the same, the enterprise can still produce to the unit of () to maximize profit. In the long run, a firm will theoretically have zero expected profits under the competitive equilibrium. The market should adjust to clear any profits if there is perfect competition. In situations where there are non-zero profits, we should expect to see either some form of long run disequilibrium or non-competitive conditions, such as barriers to entry, where there is not perfect competition between firms. [5] [ full citation needed ]

Markup pricing

In addition to using methods to determine a firm's optimal level of output, a firm that is not perfectly competitive can equivalently set price to maximize profit (since setting price along a given demand curve involves picking a preferred point on that curve, which is equivalent to picking a preferred quantity to produce and sell). The profit maximization conditions can be expressed in a "more easily applicable" form or rule of thumb than the above perspectives use. [8] [ full citation needed ] The first step is to rewrite the expression for marginal revenue as

, where and refer to the midpoints between the old and new values of price and quantity respectively. [8] The marginal revenue from an incremental unit of output has two parts: first, the revenue the firm gains from selling the additional units or, giving the term . The additional units are called the marginal units. [9] [ full citation needed ] Producing one extra unit and selling it at price brings in revenue of . Moreover, one must consider "the revenue the firm loses on the units it could have sold at the higher price" [9] —that is, if the price of all units had not been pulled down by the effort to sell more units. These units that have lost revenue are called the infra-marginal units. [9] That is, selling the extra unit results in a small drop in price which reduces the revenue for all units sold by the amount . Thus, , where is the price elasticity of demand characterizing the demand curve of the firms' customers, which is negative. Then setting gives so and . Thus, the optimal markup rule is:

or equivalently
. [10] [11] [ full citation needed ]

In other words, the rule is that the size of the markup of price over the marginal cost is inversely related to the absolute value of the price elasticity of demand for the good. [10]

The optimal markup rule also implies that a non-competitive firm will produce on the elastic region of its market demand curve. Marginal cost is positive. The term would be positive so only if is between and (that is, if demand is elastic at that level of output). [12] [ full citation needed ] The intuition behind this result is that, if demand is inelastic at some value then a decrease in would increase more than proportionately, thereby increasing revenue ; since lower would also lead to lower total cost, profit would go up due to the combination of increased revenue and decreased cost. Thus, does not give the highest possible profit.

Marginal product of labor, marginal revenue product of labor, and profit maximization

The general rule is that the firm maximizes profit by producing that quantity of output where marginal revenue equals marginal cost. The profit maximization issue can also be approached from the input side. That is, what is the profit maximizing usage of the variable input? [13] To maximize profit the firm should increase usage of the input "up to the point where the input's marginal revenue product equals its marginal costs". [14] Mathematically, the profit-maximizing rule is , where the subscript refers to the commonly assumed variable input, labor.

The marginal revenue product is the change in total revenue per unit change in the variable input, that is, .

is the product of marginal revenue and the marginal product of labor or .

Criticism

The maximization of producer surplus can in some cases reduce consumer surplus. [15] Some forms of producer profit maximization are considered anti-competitive practices and are regulated by competition law. [15] Maximization of short-term producer profit can reduce long-term producer profit, which can be exploited by predatory pricing such as dumping. [16]

Government Regulation

Market quotas reflect the power of a firm in the market, a firm dominating a market is very common, and too much power often becomes the motive for non-Hong behavior. Predatory pricing, tying, price gouging and other behaviors are reflecting the crisis of excessive power of monopolists in the market. In an attempt to prevent businesses from abusing their power to maximize their own profits, governments often intervene to stop them in their tracks. A major example of this is through anti-trust regulation which effectively outlaws most industry monopolies. Through this regulation, consumers enjoy a better relationship with the companies that serve them, even though the company itself may suffer, financially speaking.

See also

Notes

  1. Karl E. Case; Ray C. Fair; Sharon M. Oster (2012), Principles of Economics (10 ed.), Prentice Hall, pp. 180–181
  2. entrepreneur.com
  3. 1 2 3 Lipsey (1975). pp. 245–47.
  4. 1 2 3 4 5 Samuelson, W and Marks, S (2003). p. 47.
  5. 1 2 Desai, M (2017).
  6. Samuelson, W and Marks, S (2003). p. 52.
  7. Landsburg, S (2002).
  8. 1 2 Pindyck, R and Rubinfeld, D (2001) p. 333.
  9. 1 2 3 Besanko, D. and Beautigam, R, (2001) p. 408.
  10. 1 2 Samuelson, W and Marks, S (2003). p. 103–05.
  11. Pindyck, R and Rubinfeld, D (2001) p. 341.
  12. Besanko and Braeutigam (2005) p. 419.
  13. Samuelson, W and Marks, S (2003). p. 230.
  14. Samuelson, W and Marks, S (2003). p. 23.
  15. 1 2 Pittman, Russell W. (17 December 2007). "Consumer Surplus as the Appropriate Standard for Antitrust Enforcement". Search eLibrary. Retrieved 24 August 2024.
  16. Cheng, Ho Fung Griffith (1 September 2020). "An economic perspective on the inherent plausibility and frequency of predatory pricing: the case for more aggressive regulation". European Competition Journal. 16 (2–3): 343–367. doi:10.1080/17441056.2020.1770478. ISSN   1744-1056.

Related Research Articles

A monopoly, as described by Irving Fisher, is a market with the "absence of competition", creating a situation where a specific person or enterprise is the only supplier of a particular thing. This contrasts with a monopsony which relates to a single entity's control of a market to purchase a good or service, and with oligopoly and duopoly which consists of a few sellers dominating a market. Monopolies are thus characterised by a lack of economic competition to produce the good or service, a lack of viable substitute goods, and the possibility of a high monopoly price well above the seller's marginal cost that leads to a high monopoly profit. The verb monopolise or monopolize refers to the process by which a company gains the ability to raise prices or exclude competitors. In economics, a monopoly is a single seller. In law, a monopoly is a business entity that has significant market power, that is, the power to charge overly high prices, which is associated with unfair price raises. Although monopolies may be big businesses, size is not a characteristic of a monopoly. A small business may still have the power to raise prices in a small industry.

In economics, specifically general equilibrium theory, a perfect market, also known as an atomistic market, is defined by several idealizing conditions, collectively called perfect competition, or atomistic competition. In theoretical models where conditions of perfect competition hold, it has been demonstrated that a market will reach an equilibrium in which the quantity supplied for every product or service, including labor, equals the quantity demanded at the current price. This equilibrium would be a Pareto optimum.

A good's price elasticity of demand is a measure of how sensitive the quantity demanded is to its price. When the price rises, quantity demanded falls for almost any good, but it falls more for some than for others. The price elasticity gives the percentage change in quantity demanded when there is a one percent increase in price, holding everything else constant. If the elasticity is −2, that means a one percent price rise leads to a two percent decline in quantity demanded. Other elasticities measure how the quantity demanded changes with other variables.

In economics, economic equilibrium is a situation in which economic forces such as supply and demand are balanced and in the absence of external influences the values of economic variables will not change. For example, in the standard text perfect competition, equilibrium occurs at the point at which quantity demanded and quantity supplied are equal.

<span class="mw-page-title-main">Break-even point</span> Equality of costs and revenues

The break-even point (BEP) in economics, business—and specifically cost accounting—is the point at which total cost and total revenue are equal, i.e. "even". In layman's terms, after all costs are paid for there is neither profit nor loss. In economics specifically, the term has a broader definition; even if there is no net loss or gain, and one has "broken even", opportunity costs have been covered and capital has received the risk-adjusted, expected return. The break-even analysis was developed by Karl Bücher and Johann Friedrich Schär.

In economics, the marginal cost is the change in the total cost that arises when the quantity produced is increased, i.e. the cost of producing additional quantity. In some contexts, it refers to an increment of one unit of output, and in others it refers to the rate of change of total cost as output is increased by an infinitesimal amount. As Figure 1 shows, the marginal cost is measured in dollars per unit, whereas total cost is in dollars, and the marginal cost is the slope of the total cost, the rate at which it increases with output. Marginal cost is different from average cost, which is the total cost divided by the number of units produced.

<span class="mw-page-title-main">Marginal product</span> Change in output resulting from employing one more unit of a particular input

In economics and in particular neoclassical economics, the marginal product or marginal physical productivity of an input is the change in output resulting from employing one more unit of a particular input, assuming that the quantities of other inputs are kept constant.

<span class="mw-page-title-main">Marginal revenue</span> Additional total revenue generated by increasing product sales by 1 unit

Marginal revenue is a central concept in microeconomics that describes the additional total revenue generated by increasing product sales by 1 unit. Marginal revenue is the increase in revenue from the sale of one additional unit of product, i.e., the revenue from the sale of the last unit of product. It can be positive or negative. Marginal revenue is an important concept in vendor analysis. To derive the value of marginal revenue, it is required to examine the difference between the aggregate benefits a firm received from the quantity of a good and service produced last period and the current period with one extra unit increase in the rate of production. Marginal revenue is a fundamental tool for economic decision making within a firm's setting, together with marginal cost to be considered.

The marginal revenue productivity theory of wages is a model of wage levels in which they set to match to the marginal revenue product of labor, , which is the increment to revenues caused by the increment to output produced by the last laborer employed. In a model, this is justified by an assumption that the firm is profit-maximizing and thus would employ labor only up to the point that marginal labor costs equal the marginal revenue generated for the firm. This is a model of the neoclassical economics type.

Cournot competition is an economic model used to describe an industry structure in which companies compete on the amount of output they will produce, which they decide on independently of each other and at the same time. It is named after Antoine Augustin Cournot (1801–1877) who was inspired by observing competition in a spring water duopoly. It has the following features:

The Ramsey problem, or Ramsey pricing, or Ramsey–Boiteux pricing, is a second-best policy problem concerning what prices a public monopoly should charge for the various products it sells in order to maximize social welfare while earning enough revenue to cover its fixed costs.

In economics, a cost curve is a graph of the costs of production as a function of total quantity produced. In a free market economy, productively efficient firms optimize their production process by minimizing cost consistent with each possible level of production, and the result is a cost curve. Profit-maximizing firms use cost curves to decide output quantities. There are various types of cost curves, all related to each other, including total and average cost curves; marginal cost curves, which are equal to the differential of the total cost curves; and variable cost curves. Some are applicable to the short run, others to the long run.

<span class="mw-page-title-main">Average variable cost</span> Variable costs of production divided by total output

In economics, average variable cost (AVC) is a firm's variable costs divided by the quantity of output produced (Q):

<span class="mw-page-title-main">Supply (economics)</span> Amount of a good that sellers are willing to provide in the market

In economics, supply is the amount of a resource that firms, producers, labourers, providers of financial assets, or other economic agents are willing and able to provide to the marketplace or to an individual. Supply can be in produced goods, labour time, raw materials, or any other scarce or valuable object. Supply is often plotted graphically as a supply curve, with the price per unit on the vertical axis and quantity supplied as a function of price on the horizontal axis. This reversal of the usual position of the dependent variable and the independent variable is an unfortunate but standard convention.

In economics, the marginal product of capital (MPK) is the additional production that a firm experiences when it adds an extra unit of input. It is a feature of the production function, alongside the labour input.

A firm will choose to implement a shutdown of production when the revenue received from the sale of the goods or services produced cannot even cover the variable costs of production. In that situation, the firm will experience a higher loss when it produces, compared to not producing at all.

In economics, the marginal product of labor (MPL) is the change in output that results from employing an added unit of labor. It is a feature of the production function and depends on the amounts of physical capital and labor already in use.

Advertising elasticity of demand is an elasticity measuring the effect of an increase or decrease in advertising on a market. Traditionally, it is considered as being positively related, demand for the good that is subject of the advertising campaign can be inversely related to the amount spent if the advertising is negative.

A markup rule is the pricing practice of a producer with market power, where a firm charges a fixed mark-up over its marginal cost.

<span class="mw-page-title-main">Monopoly price</span> Aspect of monopolistic markets

In microeconomics, a monopoly price is set by a monopoly. A monopoly occurs when a firm lacks any viable competition and is the sole producer of the industry's product. Because a monopoly faces no competition, it has absolute market power and can set a price above the firm's marginal cost.

References