R23X-class airship

Last updated

R23X class
British dirigible R27.jpg
R27 during her brief career in the summer of 1918
RoleNaval patrol airship
National originUnited Kingdom
Manufacturer Beardmore (R27)
Armstrong-Whitworth (R29)
First flight29 May 1918
Primary user RNAS / RAF
Number built2
Developed from 23 class airship

The British R.23X class of rigid airships were developed during World War I using the experiences gained from the 23 class, but only two of the planned four R.23X class were built: R.27 and R.29. Both were completed mid-1918, but just 2+12 months after entering service R.27 was destroyed by fire in a hangar; while R.29 went on to become the most successful British wartime rigid airship, being the only one to meet enemy action, as well as the only one to sink a submarine. [1]

Contents

Design and development

Control wheel from airship R29, Museum of Flight Control wheel from airship R29, Museum of Flight.jpg
Control wheel from airship R29, Museum of Flight

The Vickers-designed 23 class rigid airships, which were basically "stretched" and modified versions of the No. 9 design, were never used in combat; however, the four ships in the class provided many hours of valuable training for British airship crews and experimental data for designers and engineers, and some radical changes and refinements were consequently incorporated into the design of the R.23X class. Originally four R.23X class were planned, R.27 to R.30 consecutively, but the programme was re-evaluated following the forced landing of L 33 (Z33) in Little Wigborough, Essex, on 24 September 1916. [1] British engineers gained a valuable insight into the state of German rigid airship design and technology when they examined the virtually intact Zeppelin, and it was subsequently decided to cancel R.28 and R.30 in order to concentrate resources on an improved design, the new R33 class. [1]

Hull

Redesigned bow and stern sections increased the gas capacity slightly for a corresponding increase in lift, but a more radical measure was the removal of the external keel corridor from the R.23X design. Not contributing significantly to the strength of the hull, the keel's main function was to distribute the weight of the fuel tanks, ballast bags and other heavy items, as well as to allow the crew to travel between the cars, and its removal effected a considerable reduction in weight together with improved manoeuvrability. Instead, the various loads were concentrated at the bulkheads and suspended from the radial wiring that maintained the shape of the hull. The gas-bags were shaped to accommodate a new internal corridor, created by the provision of inverted U-shaped ribs above the two lowest longitudinal members, which also allowed access to the fuel tanks and ballast. An improved system of pipes linking the fuel tanks enabled faster refuelling, and could be used to jettison fuel in an emergency. However, as with earlier designs, doped linen was used for the hull's outer covering; and being absorbent, just a few hours of rain could add around a ton of water to the weight. [1]

Propulsion and testing

The R.23X class were powered by four 300 hp (220 kW) Rolls-Royce Eagle VI engines – later and more powerful versions of those employed by the 23r class, but arranged in a similar manner. The fore and aft gondolas each housed a single engine driving a pair of swivelling propellers, one either side, while the centre car contained two engines with one fixed propeller each. [1]

As a result of the removal of the external keel, when the first trials were held the two airships were able to turn more quickly than their predecessors; but more importantly it was discovered during the lift and trim tests that the disposable lift was more than 812 tons. This was significantly better than any previous British airship, and allowed a greater bomb load to be carried as well as more fuel for increased range. [1]

Operational history

R.27

R.27 was constructed by William Beardmore and Company at Inchinnan, Renfrewshire, and commissioned on 29 June 1918. Under the command of Major Ommaney she flew for a total of 89 hours 40 minutes, and came to a premature end while at RNAS (Royal Naval Air Service) Howden airship station on 16 August that year. Sharing a hangar with R.27 was a makeshift SSZ class blimp that was being assembled from a disused envelope and a spare SS Zero car. Petrol fumes from a spillage in the car were ignited some time later by a spark when the radio equipment was being tested; and the ensuing fireball, fed by fuel and gas, completely enveloped and destroyed both craft. Although the hangar itself survived, one airman lost his life, and two further blimps that were moored nearby, SSZ.38 and SSZ.54, were also destroyed. [1]

R.29

R.29 was constructed by Armstrong Whitworth Aircraft at Barlow, North Yorkshire, and was commissioned on 20 June 1918. She was based at the East Fortune RNAS airship station in East Lothian, Scotland, where her operational career lasted less than five months. During this time she flew for 335 hours, covered an estimated 8,215 miles (13,221 km), and became the most successful British wartime "rigid". [1]

She carried out a number of extensive patrols including one lasting over 30 hours, and two others for more than 20 hours. She encountered German U-boats on three occasions – the first escaped; the second struck a mine when pursued; and under the command of Major G. M. Thomas on 29 September 1918 she attacked a third, UB-115 about 4.5 nautical miles (8.3 km) northeast of Beacon Point, Newton-by-the-Sea, off Northumberland. [2] During the attack, in which R.29 was joined by armed trawlers and the destroyers HMS Ouse and Star, [1] [3] she dropped two 230 lb (100 kg) bombs. Intelligence reports subsequently confirmed that the submarine had been destroyed in the attack – the only recorded success by any British wartime rigid airship. [1]

R.29 flew another 16 hours after the Armistice, and in May 1919 her midship car was replaced by a smaller and lighter type containing just one engine driving a single propeller. She subsequently flew a further 87 hours including an extended flight over Scotland accompanied by R34, and was finally deleted in October, 1919. She covered an estimated 11,334 miles (18,240 km) in service, more than any previous British rigid airship. [1]

Operators

Flag of the United Kingdom.svg  United Kingdom

Specifications

Data from [1]

General characteristics

Performance

Armament

Notes

  1. 1 2 3 4 5 6 7 8 9 10 11 12 HMA 23X Airship Heritage Trust. Retrieved on 10 March 2009.
  2. Helgason, Guðmundur. "WWI U-boats: UB 115". German and Austrian U-boats of World War I - Kaiserliche Marine - Uboat.net. Retrieved 11 March 2009.
  3. MHSC. "Viola-Dias, War, Distant Waters and the Hull Fishing Industry in Both World Wars" (PDF). MHSC Maritime Historical Studies Centre. University of Hull. Retrieved 3 March 2009.

Related Research Articles

<span class="mw-page-title-main">Blimp</span> Non-rigid airship

A blimp, or non-rigid airship, is an airship (dirigible) without an internal structural framework or a keel. Unlike semi-rigid and rigid airships, blimps rely on the pressure of the lifting gas inside the envelope and the strength of the envelope itself to maintain their shape.

<span class="mw-page-title-main">Airship</span> Powered lighter-than-air aircraft

An airship or dirigible balloon is a type of aerostat or lighter-than-air aircraft that can navigate through the air under its own power. Aerostats gain their lift from a lifting gas that is less dense than the surrounding air.

USS <i>Akron</i> U.S. Navy airship (1931–33) – purpose-built flying aircraft carrier

USS Akron (ZRS-4) was a helium-filled rigid airship of the U.S. Navy, the lead ship of her class, which operated between September 1931 and April 1933. It was the world's first purpose-built flying aircraft carrier, carrying F9C Sparrowhawk fighter planes, which could be launched and recovered while it was in flight. With an overall length of 785 ft (239 m), Akron and her sister ship Macon were among the largest flying objects ever built. Although LZ 129 Hindenburg and LZ 130 Graf Zeppelin II were some 18 ft (5.5 m) longer and slightly more voluminous, the two German airships were filled with hydrogen, and so the two US Navy craft still hold the world record for the largest helium-filled airships.

USS <i>Los Angeles</i> (ZR-3) United States naval airship

USS Los Angeles was a rigid airship, designated ZR-3, which was built in 1923–1924 by the Zeppelin company in Friedrichshafen, Germany, as war reparations. It was delivered to the United States Navy in October 1924 and after being used mainly for experimental work, particularly in the development of the American parasite fighter program, was decommissioned in 1932.

LZ 127 <i>Graf Zeppelin</i> German Zeppelin (rigid airship)

LZ 127 Graf Zeppelin was a German passenger-carrying hydrogen-filled rigid airship that flew from 1928 to 1937. It offered the first commercial transatlantic passenger flight service. The ship was named after the German airship pioneer Ferdinand von Zeppelin, a count in the German nobility. It was conceived and operated by Hugo Eckener, the chairman of Luftschiffbau Zeppelin.

<i>R38</i>-class airship British rigid airship class

The R.38 class of rigid airships was designed for Britain's Royal Navy during the final months of the First World War, intended for long-range patrol duties over the North Sea. Four similar airships were originally ordered by the Admiralty, but orders for three of these were cancelled after the armistice with Germany and R.38, the lead ship of the class, was sold to the United States Navy in October 1919 before completion.

<span class="mw-page-title-main">R100</span> British rigid airship in service 1929-1930

His Majesty's Airship R100 was a privately designed and built British rigid airship made as part of a two-ship competition to develop a commercial airship service for use on British Empire routes as part of the Imperial Airship Scheme. The other airship, the R101, was built by the British Air Ministry, but both airships were funded by the Government.

R.36 was a British airship designed during World War I, but not completed until after the war. When she first flew in 1921, it was not in her originally intended role as a patrol aircraft for the Royal Navy, but as an airliner, the first airship to carry a civil registration (G-FAAF).

<span class="mw-page-title-main">R33-class airship</span> Class of British rigid airships within the Royal Naval Air Service during WWI

The R.33 class of British rigid airships were built for the Royal Naval Air Service during the First World War, but were not completed until after the end of hostilities, by which time the RNAS had become part of the Royal Air Force. The lead ship, R.33, served successfully for ten years and survived one of the most alarming and heroic incidents in airship history when she was torn from her mooring mast in a gale. She was called a "Pulham Pig" by the locals, as the blimps based there had been, and is immortalised in the village sign for Pulham St Mary. The only other airship in the class, R.34, became the first aircraft to make an east to west transatlantic flight in July 1919 and, with the return flight, made the first two-way crossing. It was decommissioned two years later, after being damaged during a storm. The crew nicknamed her "Tiny".

<span class="mw-page-title-main">Rigid airship</span> Airship in which the envelope is supported by a framework

A rigid airship is a type of airship in which the envelope is supported by an internal framework rather than by being kept in shape by the pressure of the lifting gas within the envelope, as in blimps and semi-rigid airships. Rigid airships are often commonly called Zeppelins, though this technically refers only to airships built by the Luftschiffbau Zeppelin company.

<span class="mw-page-title-main">23-class airship</span> Type of aircraft

The 23 class were rigid airships produced in the United Kingdom during the First World War. Development of the 23 class began in August 1915 when Vickers was asked to improve the 9r design by increasing its gas capacity by adding a bay and increasing the capacity of the bow and stern gas cells. The 23-class was designed by H.B. Pratt and Barnes Wallis of Vickers. Vickers built the first and last of the four ships. The other two were built by William Beardmore and Company and Armstrong-Whitworth. While the 23 class airships were never used in combat, the four ships provided many hours of valuable training and experimental data for British airship crews and designers. Although a total of 17 of these ships were contemplated at one time, only four were ever built. The 23 class was found to be significantly overweight, leading to its cancellation in favour of the more-refined R23X class.

<span class="mw-page-title-main">No. 9r</span> Type of aircraft

HMA No. 9r was a rigid airship designed and built by Vickers at Walney Island just off Barrow-in-Furness, Cumbria. It was ordered in 1913 but did not fly until 27 November 1916 when it became the first British rigid airship to do so. It was dismantled in June 1918 after being flown for around 165 hours, mainly for experimental purposes.

<span class="mw-page-title-main">SSZ class airship</span> Type of aircraft

The SSZ non-rigid airships or "blimps" were developed in United Kingdom during World War I from the earlier SS class. The main role of these craft was to escort convoys and scout or search for German U-boats. A secondary purpose was to detect and destroy mines.

<span class="mw-page-title-main">Semi-rigid airship</span> Lighter-than-air aircraft

A semi-rigid airship is an airship which has a stiff keel or truss supporting the main envelope along its length. The keel may be partially flexible or articulated and may be located inside or outside the main envelope. The outer shape of the airship is maintained by gas pressure, as with the non-rigid "blimp". Semi-rigid dirigibles were built in significant quantity from the late 19th century but in the late 1930s they fell out of favour along with rigid airships. No more were constructed until the semi-rigid design was revived by the Zeppelin NT in 1997.

SM <i>UB-115</i>

SM UB-115 was a German Type UB III submarine or U-boat in the German Imperial Navy during World War I. She was commissioned into the German Imperial Navy on 28 May 1918 as SM UB-115. She was the only German submarine commissioned with the number 115.

<span class="mw-page-title-main">HMA No. 1</span> Rigid airship of the Royal Navy (completed 1911)

His Majesty's Airship No. 1 was designed and built by Vickers, Sons and Maxim at their works in Barrow-in-Furness, Lancashire, England, as an aerial scout airship for the Royal Navy. It was the first British rigid airship to be built, and was constructed in a direct attempt to compete with the German airship programme. Often referred to as "Mayfly", a nickname given to it by the lower deck, in public records it is designated 'HMA Hermione' because the naval contingent at Barrow were attached to HMS Hermione, a cruiser moored locally preparing to act as its tender.

<span class="mw-page-title-main">SS class airship</span> Type of aircraft

SSclass airships were simple, cheap and easily assembled small non-rigid airships or "blimps" that were developed as a matter of some urgency to counter the German U-boat threat to British shipping during World War I. A secondary purpose was to detect and destroy mines. The class proved to be versatile and effective, with a total of 158 being built in several versions.

The SSP were a class of Royal Navy non-rigid airship or "blimp" developed by the United Kingdom during World War I as a successor to the earlier SS class airship. Found to be inferior to a parallel development, the Submarine Scout Zero non-rigid, only a few were built. The main role of these craft was to escort convoys and scout or search for German U-boats.

<span class="mw-page-title-main">Zeppelin R Class</span> Type of aircraft

The Zeppelin R Class was a type of rigid airship developed by Zeppelin Luftschiffbau in 1916 for use by the Imperial German Navy and the German Army for bombing and naval patrol work. Introduced in July 1916 at a time when British air defences were becoming increasingly capable, several were lost in the first months of operation, leading the Germans to reconsider their technical requirements and eventually to develop airships capable of bombing from a greater height. Most surviving examples were modified to meet these requirements, by reducing weight at the expense of performance. A total of 17 were built.

<i>Akron</i>-class airship Type of aircraft

The Akron-class airships were a class of two rigid airships constructed for the US Navy in the early 1930s. Designed as scouting and reconnaissance platforms, the intention for their use was to act as "eyes for the fleet", extending the range at which the US Navy's Scouting Force could operate to beyond the horizon. This capability was extended further through the use of the airships as airborne aircraft carriers, with each capable of carrying a small squadron of airplanes that could be used both to increase the airship's scouting range, and to provide self-defense for the airship against other airborne threats.

References