ROF Nottingham

Last updated

Royal Ordnance Factory (ROF) Nottingham opened in 1936 in The Meadows, Nottingham, United Kingdom. It was one of a number of Royal Ordnance Factories created in the build up to World War II. During the war the site employed up to four thousand workers. The factory was closed in 2001. [1]

Contents

The site that had been used for manufacturing, mainly of arms, since 1916.

Early site history and production: World War I

Royal Ordnance Factories were the successors to the manufacturing departments of the Ordnance Office.

Site history

NPF Nottingham female worker. National Projectile Factory, Nottingham worker.jpg
NPF Nottingham female worker.

1915

1916

1917

1918

1919

1920

1923

1930

1935

World War II

Conversion to an Engineering ROF

In the late 1930s, war was seen as a possibility, if not likely, and a sizeable rearmament programme began, probably also activated by the concern that a large proportion of the arsenal was becoming obsolete.

The factory was bought back by the War Office in September 1936, the conveyance (dated 7 May) detailing a sum of £94,475 for the purchase.[ citation needed ] It was Royal Ordnance Factory Number 23. [4]

Considerable effort was expended in turning the ROF Nottingham into a modern gun factory. The first machine tools were installed in January 1937 and an article in 'Machinery' magazine of 19 January 1939 describes the last machine tools as installed 'a few weeks ago'

Some idea of the scale of the endeavour can be gauged by Nottingham being listed in the ROF accounts for year ending 31 March 1938 as 'under construction'. As of that date, the amount spent on construction and equipment at Nottingham was £1,725,203 (considerably more than the purchase price). A new production facility (the South Shop) was being built at about this time, and roughly 300 people were employed on the reconstruction in 1937. The payroll level had grown to 2,272 people at the end of March 1938, and 3,796 a year later, shortly after the aforementioned 'Machinery' article had described the factory as 'working to capacity'.

World War II was if anything much busier than World War I had been, with the peak employment being said to number 14,000 (a large proportion being women) on two shifts of twelve hours each.[ citation needed ]

Until the remodelling of the Meadows area around 1975, ROF Nottingham was much less conspicuous than it became (as least from ground level), being situated at the end of a series of Coronation Street type roads full of terraced houses. Apart from Kings Meadow Road, there were parallel streets to the north called Middle Furlong Road, Rupert Street and Newcastle Street, which extended over what became the North Car Park, so that the end houses were very close to the end of main manufacturing unit – North Shop (a gate by the Paint Shop was also in use). It was decided therefore, as a camouflage measure, to paint a series of stripes running east–west across the North Shop roof, in tune with the roads, so that the factory resembled a continuation of the houses when viewed from the air. There appear to be no traces now of this measure, and just how effective it was is uncertain, but it represents one example of the extent to which such matters were taken seriously.

World War II production

Nottingham had two main production lines during the war; the 3.7-inch medium anti-aircraft gun and the Bofors 40 mm gun. For the latter, Nottingham made the mobile mounts for the British Army from 1938 onwards, and was the main producer of mountings for British ships, including the Stabilised Tachymetric Anti-Aircraft Gun, STAAG. The 2 Pounder anti-tank gun was made at Nottingham from 1937 to 1939. The BL 5.5-inch Medium Gun (1940–42) and the 17 pounder gun, including conversions of the Sherman tank into the 17 pdr armed Sherman Firefly. The hull and suspension units for the first prototype A41 tank, later to be named as the Centurion tank, were built at Nottingham.

Post-war era

Immediate post-war years

As would be expected, the period immediately after the war (1946–50) saw little or no armament production and caused the factory to diversify widely, into initially unlikely fields.

Products at this time included tunnelling shields, parts for hosiery machines, structural parts for band-saws and other light wood working machinery, generators, gearboxes for Guy motor-buses, printers guillotines and forging dies for Raleigh pedal cycle cranks.

Autumn 1950 saw the start of another re-armament drive, which became particularly apparent the following year. The Nottingham Journal of Wednesday 6 June 1951 described Nottingham as the 'second largest factory after Woolwich Deep hole boring was claimed to be ten times faster than in World War II (the gun in question being the 20 pdr for early Centurions) and the major non-gun activity was the rework of Comet tanks.

The next few years do not seem to have been very busy, but in the late fifties activity picked up on various vehicle and specialist projects; manning levels were quite low: there were 517 people employed in October 1956, falling to 408 two years later, whilst a staff chart for March 1959 listed only 84 staff from the Factory Superintendent down to the Assistant Foreman in the Forges.

Projects:

Later years

Later projects included the Heavy Dummy Axle (HDA) and the Eager Beaver Air Portable Rough Terrain Fork Lift Truck (APFLT) from roughly 1969–1973.

The Bar Mine Layer, the Light Mobile Digger (LMD) trench digging machine, and the manufacture and assembly of the FV180 Combat Engineer Tractor were made from 1978 to 1983, although ROF Leeds was also heavily involved in production of this vehicle.

Large guns produced included the Royal Ordnance L7 105 mm tank ordnance, which was for a long time one of the most important products, and the 165 mm demolition gun that fired a very large HESH projectile and was fitted to the FV4003 Centurion Mk 5 AVRE (Armoured Vehicle Royal Engineers). Other guns included the 76 mm L5 and 76 mm L23 for armoured cars, the 105 mm L13 for the Abbot SP artillery, the L16 81mm Mortar for the Infantry, and to provide an even more tangible link with the present, the 105 mm L119 and L118 Light Gun for the Artillery.

The first delivery of the L118 to the British Army took place in 1974, a variant of the L119 Light Gun – which was type classified in record time by the United States Army as the M119 howitzer.[ citation needed ]

On 2 January 1985, the government owned Royal Ordnance factories, including ROFN, were privatised as a public corporation called Royal Ordnance plc.

The sale of ROF Leeds to Vickers plc and closure of the Royal Small Arms Factory (RSAF), Enfield,[ when? ] both had their effects on the site: RO Leeds, causing a considerable amount of vehicle and vehicle-related work to come to Nottingham; and RSAF Enfield, causing the Small Arms Facility in South Shop to be created.

By mid-1987, the South Shop has become disused and was in a semi-derelict condition. The building was remodelled and converted into the Nottingham Small Arms Facility (NSAF). A small arms proof and test range was built in what was once an air-raid shelter, and a tube test range installed. From 1988, the SA80 assault riffle was manufactured at the facility.

Circa 1989, ROFN designed the Royal Ordnance L30 gun for the Challenger 2 tank project.

Closure

ROF Nottingham was finally closed in 2001 and the armaments manufacturing capability transferred to the BAE Systems Land Systems plant at Barrow-In-Furness, Cumbria.

A building especially constructed to house the MOD Small Arms Museum collection was known as the Pattern Room. On closure the collection was transferred to the Royal Armouries Museum in Leeds.

See also

Notes

  1. Nanrah, Gurjeet (7 February 2021). "Life at city factory which created gun barrels and explosives". NottinghamshireLive. Retrieved 15 February 2021.
  2. Membership records. Institute of Mechanical Engineers.
  3. "To be Officers of the Civil Division of the said Most Excellent Order" (PDF). Third Supplement to the London Gazette: 3790. 30 March 1920. Retrieved 25 October 2015.
  4. "EPW050512 ENGLAND (1936). Royal Ordnance Factory 23 under construcation, Nottingham, 1936. This image has been produced from a copy-negative. | Britain From Above". britainfromabove.org.uk. Retrieved 15 February 2021.

Related Research Articles

<span class="mw-page-title-main">Churchill tank</span> British heavy infantry tank

The Tank, Infantry, Mk IV (A22) Churchill was a British infantry tank used in the Second World War, best known for its heavy armour, large longitudinal chassis with all-around tracks with multiple bogies, its ability to climb steep slopes, and its use as the basis of many specialist vehicles. It was one of the heaviest Allied tanks of the war.

<span class="mw-page-title-main">Centurion (tank)</span> British main battle tank

The Centurion was the primary British Army main battle tank of the post-World War II period. Introduced in 1945, it is widely considered to be one of the most successful post-war tank designs, remaining in production into the 1960s, and seeing combat into the 1980s. The chassis was adapted for several other roles, and these variants have remained in service. It was a very popular tank with good armour, manoeuvrability, and armament.

<span class="mw-page-title-main">Cromwell tank</span> British WWII cruiser tank

The Cromwell tank, officially Tank, Cruiser, Mk VIII, Cromwell (A27M), was one of the series of cruiser tanks fielded by Britain in the Second World War. Named after the English Civil War-era military leader Oliver Cromwell, the Cromwell was the first tank put into service by the British to combine high speed from a powerful, reliable engine and reasonable armour. The intended dual-purpose high velocity gun could not be fitted in the turret, so a medium velocity dual purpose gun was fitted instead. Further development of the Cromwell combined with a high velocity gun led to the Comet tank.

<span class="mw-page-title-main">Comet (tank)</span> British cruiser tank

The Comet tank or Tank, Cruiser, Comet I (A34) was a British cruiser tank that first saw use near the end of the Second World War, during the Western Allied invasion of Germany. The Comet was developed from the earlier Cromwell tank and mounted the new 17 pdr High Velocity (HV) gun, in a lower profile, partly-cast turret. This gun was effective against late-war German tanks, including the Panther at medium range, and the Tiger.

<span class="mw-page-title-main">Ordnance QF 17-pounder</span> Anti-tank gun and tank gun

The Ordnance Quick-Firing 17-pounder was a 76.2 mm (3 inch) gun developed by the United Kingdom during World War II. It was used as an anti-tank gun on its own carriage, as well as equipping a number of British tanks. Used with the APDS shot, it was capable of defeating all but the thickest armour on German tanks. It was used to 'up-gun' some foreign-built vehicles in British service, notably to produce the Sherman Firefly variant of the US M4 Sherman tank, giving British tank units the ability to hold their own against their German counterparts. In the anti-tank role, it was replaced after the war by the 120 mm BAT recoilless rifle. As a tank gun, it was succeeded by the 84 mm 20 pounder.

<span class="mw-page-title-main">Ordnance QF 25-pounder</span> British field gun and howitzer used during the Second World War

The Ordnance QF 25-pounder, or more simply 25-pounder or 25-pdr, was the major British field gun and howitzer during the Second World War. Its calibre is 3.45-inch (87.6 mm). It was introduced into service just before the war started, combining both high-angle and direct-fire abilities, a relatively high rate of fire, and a reasonably lethal shell in a highly mobile piece. It remained the British Army's primary artillery field piece well into the 1960s, with smaller numbers serving in training units until the 1980s. Many Commonwealth of Nations countries used theirs in active or reserve service until about the 1970s and ammunition for the weapon is currently being produced by Pakistan Ordnance Factories. Initial production was slow, but by 1945, over 12,000 had been manufactured. The 25-pounder was probably the most outstanding field artillery piece used by British and Commonwealth forces in the Second World War, being durable, easy to operate and versatile.

<span class="mw-page-title-main">Chieftain (tank)</span> Main battle tank

The FV4201 Chieftain was the main battle tank of the United Kingdom during the 1960s–1990s.

<span class="mw-page-title-main">Royal Ordnance L7</span> Rifled tank gun

The Royal Ordnance L7, officially designated Gun, 105 mm, Tank, L7, is the basic model of the United Kingdom's most successful tank gun. It is a 105 mm L/52 rifled design by the Royal Ordnance Factories, intended for use in armoured fighting vehicles, replacing the older QF 20-pounder (84 mm) gun mounted on the British Centurion tank. The successful L7 gun has been fitted on many armoured vehicles, including the Centurion, the German Leopard 1 and several variants of the US M48 Patton and M60.

<span class="mw-page-title-main">Conqueror (tank)</span> British heavy tank

The FV 214 Conqueror, also known as "Tank, Heavy No. 1, 120 mm Gun, Conqueror" was a British heavy tank of the post-World War II era. It was developed as a response to the Soviet IS-3 heavy tank. The Conqueror's main armament, an L1 120 mm gun, was larger than the 20-pounder (83.4 mm) gun carried by its peer, the Centurion. The Conqueror's role was to provide long range anti-tank support for the Centurion. Nine Conquerors were issued for each regiment in Germany, usually grouped in three tank troops. In the British Army both the Conqueror and the Centurion were replaced by the Chieftain.

<span class="mw-page-title-main">Royal Small Arms Factory</span> Rifle factory in Enfield, London, 1816–1988

The Royal Small Arms Factory (RSAF) was a UK government-owned rifle factory in Enfield, adjoining the Lee Navigation in the Lea Valley. The factory produced British military rifles, muskets and swords from 1816. It closed in 1988, but some of its work was transferred to other sites.

<span class="mw-page-title-main">Ordnance QF 6-pounder</span> British anti-tank gun

The Ordnance Quick-Firing 6-pounder 7 cwt, or just 6-pounder, was a British 57 mm gun, serving during the Second World War as a primary anti-tank gun of both the British and United States Army. It was also used as the main armament for a number of armoured fighting vehicles.

<span class="mw-page-title-main">Ordnance QF 2-pounder</span> Tank gun and anti-tank gun

The Ordnance QF 2-pounder, or simply "2 pounder gun", was a 40 mm (1.575 in) British anti-tank gun and vehicle-mounted gun employed in the Second World War.

<span class="mw-page-title-main">Ram tank</span> Canadian medium tank

The Tank, Cruiser, Ram was a cruiser tank designed and built by Canada in the Second World War, based on the U.S. M3 Medium tank chassis. Due to standardization on the American Sherman tank for frontline units, it was used exclusively for training purposes and was never used in combat as a gun tank. The chassis was used for several other combat roles however, such as a flamethrower tank, observation post, and armoured personnel carrier.

ROF Dalmuir was an Engineering Royal Ordnance Factory owned by the UK government during World War II. The factory manufactured medium-calibre guns, particularly anti-aircraft guns. After the war, the factory manufactured armoured fighting vehicles.

This article lists British armoured fighting vehicle production during the Second World War. The United Kingdom produced 27,528 tanks and self-propelled guns from July 1939 to May 1945, as well as 26,191 armoured cars and 69,071 armoured personnel carriers.

<span class="mw-page-title-main">Ordnance QF 20-pounder</span> Tank gun

The Ordnance QF 20 pounder was a British 84 mm (3.307 inch) tank gun. It was introduced in 1948 and used in the Centurion main battle tank, Charioteer medium tank, and Caernarvon Mark II heavy tank. After the 20 pounder gun was found to have inadequate performance against the Soviet T-54 the gun was mostly replaced in service by the larger calibre 105 mm L7 gun.

<span class="mw-page-title-main">Charioteer (tank)</span> Medium Tank built from Cruiser Tank (based on weight, speed, caliber of gun, armor, and the text.).

The Charioteer Tank, or FV4101 Tank, Medium Gun, Charioteer was a post-world-war II British armoured fighting vehicle. It was produced in the 1950s to up-gun units of the Royal Armoured Corps continuing to use the Cromwell tank during the early phases of the Cold War. The vehicle itself was a modified Cromwell with a more powerful gun installed in a relatively lightly armoured two-man turret.

The former Royal Ordnance Factory (ROF), Radway Green manufactures small arms ammunition for the British armed forces. It is located in the hamlet of Radway Green near Barthomley near Alsager in Cheshire in the UK.

<span class="mw-page-title-main">Tanks in the British Army</span>

This article on military tanks deals with the history and development of tanks of the British Army from their first use in the First World War, the interwar period, during the Second World War, the Cold War and modern era.

Royal Ordnance Factory Leeds, first opened as a munitions factory in December 1915 and opened as an ROF in January 1936, was one of a number of Royal Ordnance Factories created at the start of the Second World War.

References