The SC-55 used both PCM and a cut-down version of the LA synthesis engine,[citation needed] to support 24-voice polyphony with 16-part multitimbrality. It came preloaded with patches imitating the Roland MT-32's variation bank, but lacked the MT-32's re-programmability. Aimed at PC music enthusiasts, the SC-55 featured 317 instrument patches, including the GS drum kits and additional controllers. The selection of effects includes reverb and chorus.
Alongside the SC-55, Roland released the SB-55 (Sound Brush), an inexpensive MIDI sequencer module the same size as the Sound Canvas. Both the Sound Canvas and Sound Brush could be rackmounted alongside each other.
Other models with comparable tone generators include Roland CM-300, Roland CM-500 and Roland SC-155 sound modules. CM-300 and CM-500 models lack the LCD screen and extended controls of SC-55. Both models have external appearance nearly identical to Roland's earlier CM-32/64-series modules. SC-155 adds additional slider controls for master and channel level and panning. Additionally, CM-500 includes fully SysEx compatible LA tone generator similar to CM-32Ls.
The SC-55mkII
A minor upgrade to the original SC-55, the Roland SC-55mkII has increased polyphony (28 voices), more patches, raising the total number to 354 instruments and extended, and improved audio-circuitry in the form of 18-bit audio (versus 16-bit in the original SC 55.)
The SC-55mkII added a serial port as an alternative interface to the MPU-401.
Roland SCC-1
Roland SCC-1
Roland also released the Roland SCC-1, an 8-bit ISA half-size card incarnation of the CM-300 sound module. The sound source is controlled by an on-board MIDI Processing Unit, a variant of the MPU-401 unit. An updated version featuring the SC-55mkII sound set was also released, known as SCC-1A. When bundled with the Band-in-a-Box and BalladeGS software, it's called SCC-1B.
Roland later replaced the SCC-1 with a combination of their MPU-401AT MIDI interface card and SCB-55 Wave Blaster-compatible daughterboard. Roland referred to this combination as the SCM-15AT. The SCC-1 was also sold as the GPPC-N for the NEC PC-98.
CM-32P and MT-32 Emulation
Since the SC-55 has no programmable memory, CM-32P and MT-32 emulation is done by providing the same sound arrangement as the preset sounds of actual devices. These variation banks are enabled by playing back special SysEx containing MIDI files, for example GS32.MID (included in the SCC-1 Utility Software), prior to loading a software title. These specially arranged tone tables contain the relevant GS sound mapped at either CM-32P or MT-32 program number. Pitch bend range is changed to 12 semitone from GS default 2 semitones. Master tuning and modulation depth are not altered by the emulation. Pan directions are reversed from actual CM-32P or MT-32 devices. CM-32P or MT-32 specific MIDISysEx messages are also ignored by the SC-55.
MT-32 Emulation Samples
The Roland SC-55's CM-32P and MT-32 emulation is based on using preset sounds of the actual devices without utilizing programmable memory or actual device synthesis techniques. This results in poor emulation for software titles relying on custom programmable MT-32 sounds as demonstrated by the introduction of the Sierra On-Line game Space Quest III: The Pirates of Pestulon.
Software titles supporting the Roland MT-32 but not utilizing its memory are emulated with better results as demonstrated by the introduction song from Origin Systems' Ultima VI: The False Prophet.
Use in media
The sounds of the SC-55 (or any other similar Roland products) can be recognized in various television jingles and production music during the 1990s. It is also notable for its use in various episodes of British television series Mr. Bean.[citation needed]
MIDI is a technical standard that describes a communication protocol, digital interface, and electrical connectors that connect a wide variety of electronic musical instruments, computers, and related audio devices for playing, editing, and recording music.
General MIDI is a standardized specification for electronic musical instruments that respond to MIDI messages. GM was developed by the American MIDI Manufacturers Association (MMA) and the Japan MIDI Standards Committee (JMSC) and first published in 1991. The official specification is available in English from the MMA, bound together with the MIDI 1.0 specification, and in Japanese from the Association of Musical Electronic Industry (AMEI).
The Roland JX-3P is a synthesizer produced by Roland Corporation of Japan from 1983–1985. The "3P" in its name refers to "Programmable Preset Polyphonic". It is notable as one of the company's first synthesizers to incorporate a MIDI interface.
Yamaha XG is an extension to the General MIDI standard, created by Yamaha. It is similar in purpose to the Roland GS standard.
The Gravis UltraSound or GUS is a sound card for the IBM PC compatible system platform, made by Canada-based Advanced Gravis Computer Technology Ltd. It was very popular in the demoscene during the 1990s.
The MPU-401, where MPU stands for MIDI Processing Unit, is an important but now obsolete interface for connecting MIDI-equipped electronic music hardware to personal computers. It was designed by Roland Corporation, which also co-authored the MIDI standard.
The Roland MT-32 Multi-Timbre Sound Module is a MIDI synthesizer module first released in 1987 by Roland Corporation. It was originally marketed to amateur musicians as a budget external synthesizer with an original list price of $695. However, it became more famous along with its compatible modules as an early de facto standard in computer music. Since it was made prior to the release of the General MIDI standard, it uses its own proprietary format for MIDI file playback.
A sound module is an electronic musical instrument without a human-playable interface such as a piano-style musical keyboard. Sound modules have to be operated using an externally connected device, which is often a MIDI controller, of which the most common type is the musical keyboard. Another common way of controlling a sound module is through a sequencer, which is computer hardware or software designed to record and playback control information for sound-generating hardware. Connections between sound modules, controllers, and sequencers are generally made with MIDI, which is a standardized interface designed for this purpose.
VDMSound was an open-source emulator of legacy sound card devices, designed to allow video games and other applications written for MS-DOS to run on the Microsoft Windows NT/2000/XP/95/98/Me operating systems. Its author is Vlad Romascanu.
The Roland LAPC-I is a sound card for IBM PC compatible computers produced by Roland Corporation. It basically consists of a MT-32-compatible Roland CM-32L and a MPU-401 unit, integrated onto a single full-length 8-bit ISA card. In addition to normal Roland dealers aimed at musicians, it was distributed in the United States by Sierra On-Line in 1989 for use with the company's games. The MSRP of the card was around US$425.
Soundscape S-2000 was Ensoniq's first direct foray into the PC sound card market. The card arrived on the market in 1994. It is a full-length ISA digital audio and sample-based synthesis device, equipped with a 2 MiB Ensoniq-built ROM-based patch set. Some OEM versions of the card feature a smaller 1 MiB patch set. It was praised for its then-high quality music synthesis and sound output, high compatibility and good software support.
The Soundscape Elite was Ensoniq's high-end ISA PC sound card offering. It offers the highest MIDI quality of any PC sound card Ensoniq produced. The board is an evolution of the company's previous Soundscape S-2000. The Soundscape ELITE was launched in March 1995.
The Ensoniq AudioPCI is a Peripheral Component Interconnect (PCI)-based sound card released in 1997. It was Ensoniq's last sound card product before they were acquired by Creative Technology. The card represented a shift in Ensoniq's market positioning. Whereas the Soundscape line had been made up primarily of low-volume high-end products full of features, the AudioPCI was designed to be a very simple, low-cost product to appeal to system OEMs and thus hopefully sell in mass quantities.
The Roland Sound Canvas lineup is a series of General MIDI (GM) based pulse-code modulation (PCM) sound modules and sound cards, primarily intended for computer music usage, created by Japanese manufacturer Roland Corporation. Some models include a serial or USB connection, to a personal computer.
Roland GS, or just GS, sometimes expanded as General Standard or General Sound, is a MIDI specification. It requires that all GS-compatible equipment must meet a certain set of features and it documents interpretations of some MIDI commands and bytes sequences, thus defining instrument tones, controllers for sound effects, etc.
The Roland JX-10 Super JX is a 12-voice analog synthesizer keyboard produced by Roland Corporation from 1986 to 1989, along with a rack-mounted version, the MKS-70. For nearly 30 years, it was the last true analog synthesizer made by Roland and has been critically acclaimed as one of their classic analog instruments. In 2015, Roland once again started producing analog synthesizers beginning with their JD-XA and JD-Xi keyboards as analog/digital crossover synthesizers. The design on the JX-10 is essentially two Roland JX-8P synthesizers put together, with a 76-note velocity-sensitive keyboard with aftertouch. It also includes features not found on the JX-8P, including a simple 1-track sketchbook sequencer and a delay effect. However, the JX-10 is not exactly the same as "two JX-8P's" because the chorus is not identical to the JX-8P. The JX-10 also has a slightly different amplifier section as well as different electronic components which further distinguish its sound from its predecessor, the JX-8P.
Yamaha SY77 is a 16 voice multitimbral music workstation first produced by Yamaha Corporation in 1989. The SY77 is a synthesizer whose architecture combines AFM synthesis, AWM2 for ROM-borne sample-based synthesis, and the combination of these two methods christened Realtime Convolution and Modulation Synthesis (RCM). The same technology was also packaged in a rack-mounted module released simultaneously, the TG77.
The Roland SC-7 General MIDI Sound Module is a stand-alone MIDI synthesizer module by Roland Corporation. It was released in 1992. It supports the General MIDI System and can also be used as a MIDI interface for a computer. The Roland SC-7 provides the basic (capital) Roland Sound Canvas sounds in a compact design for stand-alone, IBM PC/AT or Apple Macintosh computer use.
The Roland ED SC-8850 is a GS-compatible MIDI sound module released in 1999 by Roland under the name RolandED. The SC-8850 was the first sound module to incorporate the new General MIDI Level 2 standard. The SC-8850 uses a PCM sampling engine based on that of the SC-88 Pro, and supports 128-voice polyphony with 64-part multitimbrality. It came preloaded with the soundsets of all older Sound Canvas models, as well as the CM-32 and MT-32. Aimed at personal computer users, the SC-8850 features 1,703 instrument patches, including the GS sounds and additional GM2 sounds. The selection of effects includes reverb, chorus, and Roland's own Insertion EFX, which adds effects like vibrato, distortion, tremolo, etc.
The Korg Collection is a suite of virtual instruments and effects that emulate Korg's various hardware synthesizers. The original release included virtual versions of the MS-20, Polysix and Wavestation. Subsequent additions have expanded the collection to feature emulations of the Mono/Poly, M1, ARP Odyssey, Triton, miniKORG 700S, Prophecy and microKORG. These plugins utilize Korg's Component Modeling Technology (CMT) to simulate the analog characteristics of the original instruments. The collection is compatible with VST, AU, and AAX plugin formats and includes standalone versions for use outside a digital audio workstation (DAW).
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
