Rover 16

Last updated

The Rover 16/50 and Rover 16 are mid-sized cars which were produced by Rover from 1926 to 1929 and non-continuously from 1936 to 1947 respectively.

Contents

Rover initially responding to requests for a more powerful engine for their four-cylinder 14 hp with the 16/50. It remained available into 1929 finishing its run soon after the demise of its smaller bore 14 hp twin. Meanwhile, Rover had begun to provide a six-cylinder 16 hp offering, their 2-litre, in its turn succeeded by their 16 hp Meteor.

Production of a considerably revised replacement for Rover's 16 hp Meteor was resumed under the name Rover 16 in mid 1936 and, with a gap for World War II, the 16 remained in Rover's catalogue until it was replaced by the Rover 75 in early 1948.

Rover 16/50

Rover 16/50
Overview
ManufacturerRover [1]
Production19261929 [1]
Body and chassis
Body style
  • 2-door open 2 or 3 seater
  • 4-door open five-seater
  • 2-door coupé
  • 4-door Weymann saloon
  • 4-door coachbuilt saloon
  • 2-door or 4-door open sports
  • chassis only [2] [3]
Layout FR [2]
Powertrain
Engine 2,413 cc (147.3 cu in) Straight-4 [2]
Dimensions
Wheelbase
  • 120 in (3,048 mm)
  • Track 54 in (1,372 mm) [1]
Length178 in (4,521 mm) [1]
Width72 in (1,829 mm) [1]
Kerb weight Saloon 24 cwt, 2,688 lb (1,219 kg) [1]
Chronology
Predecessor Rover 14/45
Successor Rover Two-litre
Rover 16/50
Overview
Manufacturer Rover
Layout
Configuration Straight 4-cylinder overhead camshaft [2]
Displacement 2,413 cc (147.3 cu in) [2]
Cylinder bore 80 mm (3.15 in) [2]
Piston stroke 120 mm (4.72 in) [2]
Valvetrain overhead camshaft [2]
Combustion
Fuel typepetrol [2]
Cooling system water [1]
Output
Power output
  • 50 bhp (37 kW; 51 PS) @ unreported rpm
  • Tax horsepower 15.87 [1]

Announced 21 May 1926 to supplement their 14/45 the 16/50 engine had a larger bore and was now rated at 16 rather than 14 hp for tax purposes. Its cubic capacity was 2.4-litres instead of 2.1-litres. The whole chassis closely follows the design of the 14/45 as does the design of the new engine. [2] The 75 mm bore of the 14/45 has been increased by 5 mm. [4]

Engine

The new engine has a Lanchester vibration damper on the front end of its crankshaft. Its camshaft and valves are overhead, the valves being set at an angle of 45 degrees on either side of the spark plug. At the back of the engine there is a vertical shaft to drive the camshaft. The camshaft works the inlet valves through rockers and by horizontal pushrods works the exhaust valves on the opposite side. The whole mechanism is enclosed and the covers are easy to remove. The double springs on the valve stems have variable tension. Though removing the cylinder head is not as simple as on a conventional design its removal does not affect the timing of the engine or its magneto. The crankshaft has three bearings, the camshaft four. The air supply to the carburettor is routed through a tunnel in the crankcase and in this way the air is slightly warmed while cooling the crankshaft's central bearing. The pistons are manganese with tubular connecting rods and the gudgeon pins receive positive oiling. [4]

Water coolant is fed through a honeycomb radiator by a water impeller in unit with the belt-driven fan drawing air through the radiator. [4]

Pressure feeds from the one reservoir provide automatic oiling to: engine, clutch, spigot-bearing, gearbox and steering, The central bearing in the torque tube is fed from the back axle. [4]

Petrol is kept in a tank midway in the frame and fed to an Autovac on the dash. The dynamo is driven from the gearbox by an enclosed silent type chain. [4]

Chassis

Steering is by worm and wheel. The steering box is fixed to the cylinder head and a long drop arm provides good leverage. The clutch uses a single plate and runs in oil. The 4-speed gearbox is a strengthened version of the 14/45 gearbox. It is assembled as a unit with the engine. It is operated by a right-hand change speed lever with reach adjustable for the driver. Gearbox lubrication is from the engine and automatic. Final drive is by spiral bevel [2] [4]

Brakes on all four wheels are operated by the foot pedal, those in front use the Perrott system. Pressure is distributed evenly by rods operated from a central location. The circular section front axle supports the chassis through underhung half-elliptical springs. The semi-elliptical back springs have central anchorages which can swivel about the axle case. [4]

Body

The saloon's windscreen is V-shaped. The side windows have two sliding panels, two winding panels and fixed panels at the rear of the six-light body. The Weymann saloon's front seat is slidable by hand. The spare wheel is carried at the back of the body in front of the folding luggage grid. [4]

Retrospective

"It was a car with doors that closed with the convincing clunk of a railway carriage, interiors trimmed with wood and leather, and an instrument panel with clear clock-faces. It had furnishings that looked like those in a doctor’s sitting room or even a consulting room, door cappings with fine inlays, and door pockets with leather flaps like giant tobacco pouches. The Doctor’s Coupé was a car for strong men in tweed plus-fours who preferred things built to last."Eric Dymock, Rover: The First Ninety Years 1904-1994. [5]

Road test

The Times' reviewer thought the engine's hemispherical combustion chambers and angled overhead valves unnecessarily complex. Four wheel brakes were provided and the overall braking system was, the reviewer thought, the best part of the whole car. Seating was comfortable in both front and back of the four-door saloon tested and the doorways The Times graded as "usable". There was just adequate headroom. The suspension rocked the saloon fore and aft if there were just two passengers. Comfortable maximum speed would be 55 to 60 mph. [4]

The reviewer also commented that the price seems high for a four-cylinder 16 hp car. The open car was priced at £575, the Weymann saloon £675 and the coachbuilt saloon £775. [4]

Rover 16 P2 (1937–1948)

Rover 16
Rover 16 October 1947 2147cc.JPG
6-light saloon registered October 1947
Overview
Manufacturer Rover
Production1937–1940
1945–1948
Body and chassis
Body style
  • four-door 6-light saloon [6]
  • four-door 4-light sports saloon" [6]
  • two-door drop head coupé [6]
Powertrain
Engine 2147 cc straight 6
Dimensions
Wheelbase 113 in (2,870 mm) [1]
Length175 in (4,445 mm)
Width62.5 in (1,588 mm)
Chronology
Predecessor Rover Meteor 16
Successor Rover 75

The Rover 16 was a medium-sized family car announced in mid-August 1936 [7] and produced by the British Rover car company between 1936 and 1940 as a successor to the Rover Meteor 16. It was put back into production in 1945 following the Second World War and remained on sale until replaced by the Rover P3 in 1948. The 16 was part of the Rover P2 range, along with Rover 10, Rover 12, Rover 14 and Rover 20 models. [8]

The car, with its mildly streamlined form, resembled the existing Rover 10 and the Rover 12 but was slightly longer and featured a more rounded back end. The six-cylinder ohv engine had a capacity of 2,147 cc. A top speed of 124 km/h (77 mph) was claimed. In addition to a “six-light” saloon and a “four-light” "sports saloon, a two-door cabriolet was available, usually referred to as a drophead coupé, with bodywork by Tickfords.

The sports saloon and the drophead coupé had slightly less length between the front and rear seats, but a longer bonnet, with the front footwell extending further beneath the bonnet.

A version called the Rover 14 saloon combined the same body with (from 1938) a 1,901 cc six-cylinder engine. There was also a version called the Rover 20 with a 2512 cc. engine.

Notable features included a "freewheel" system, Bijur-Luvax automatic lubrication of the chassis, and Girling rod actuated fully compensated mechanical brakes of exceptionally high efficiency.

Road test

Said the correspondent of The Times, "The Rover Sixteen is exceptionally attractive by reason of its quiet gentle manner, sweet running, comfort and spruceness in and out." Further lengthy comment was lyrical. The sole concern was that the engine could with advantage be rather more powerful. Comfortable maximum speed — 75 mph. [9]

The Rover 16 saloon returned to production almost unchanged after the war, but with a different inlet manifold, and the horizontal SU carburettor was replaced with a Zenith downdraught unit, and the white metal crankshaft main bearings were replaced with shell bearings. The drop head coupe version was no longer listed.

1947 sports saloon 1947 Rover 16 four-light sports saloon (5747354084).jpg
1947 sports saloon
1947 Rover 16 four-light sports saloon (5746806475).jpg
1947 6-light saloon Rover 16 Witham.JPG
1947 6-light saloon
1947 sports saloon interior 1947 Rover 16HP P2 4 light (4499483517).jpg
1947 sports saloon interior
1947 Rover 16HP P2 4 light (4499483741).jpg
1947 Rover 16 instrument panel (7346767288).jpg
1939 drophead coupe Rover 16 Cabriolet (1939) (15414874475) (2).jpg
1939 drophead coupé
Rover 16 Cabriolet (1939) (19615179039).jpg

Related Research Articles

The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912. A Daimler-Knight sleeve valve engine option was available on the original model in 1911 and 1912.

<span class="mw-page-title-main">Rover 10</span> Motor vehicle

The Rover 10 was a small family car from the British Rover car company produced between 1927 and 1947.

<span class="mw-page-title-main">Rover Meteor</span> Motor vehicle

The Rover Meteor was a short-lived 2½-litre or 2-litre medium-sized car made by The Rover Company Limited of Meteor Works Coventry. The new 2½-litre model was announced in mid-February 1930 to supplement Rover's Light Twenty which used the same engine and essentially the same chassis.

<span class="mw-page-title-main">Hillman 14</span> Motor vehicle

The Hillman Fourteen is a medium-sized 4-cylinder car announced by Hillman's managing director Spencer Wilks, a son-in-law of William Hillman, at the end of September 1925. This new Fourteen substantially increased Hillman's market share and remained on sale into 1931. During this time it was the main product of the company.

<span class="mw-page-title-main">Alvis 12/70</span> Motor vehicle


The Alvis 12/70 was announced by Alvis cars 22 September 1937. It was a four-cylinder sports saloon or 4-seater drophead coupé related to the pricier six-cylinder Alvis Silver Crest.

<span class="mw-page-title-main">Rover 12</span> Name given to several medium-sized family cars from the British Rover car company

The Rover 12 was a name given to several medium-sized family cars from the British Rover car company between 1905 and 1948.

<span class="mw-page-title-main">Daimler Fifteen</span> Motor vehicle

The Daimler Fifteen, was a saloon car at the low end of this manufacturer’s range, announced in September 1932. It was the first Daimler product for more than two decades with an engine that breathed conventionally through poppet valves. Conventional valve gear had improved, superseding the former advantages of the Daimler-Knight sleeve-valve technology. The car's name derived from its tax rating of 15 hp. The design of its 6-cylinder 1.8-litre engine was developed from the 4-cylinder 1.2-litre Lanchester Ten which was installed in Lanchester's shorter versions of the same chassis and bodies and using the same Daimler semi-automatic transmissions.

<span class="mw-page-title-main">Lanchester Ten</span> Motor vehicle

The Lanchester Ten and Lanchester Eleven were sold by The Lanchester Motor Company Limited from the Ten's announcement in September 1932 until 1951. Quite different from previous Lanchesters, the Ten was the second of Lanchester's new owner's new Daimler-linked Lanchester range. The names Ten and Eleven referred to the engine's rating for the annual tax and did not relate to the engine's power output.

<span class="mw-page-title-main">Lanchester Eighteen 15/18</span> Motor vehicle

The Lanchester Eighteen at first known as the 15/18 was announced at the beginning of October 1931. Quite unlike any previous Lanchester it was their first new car following BSA's takeover of The Lanchester Motor Company Limited in January 1931. A medium sized car was a new departure for Lanchester.

<span class="mw-page-title-main">BSA Ten</span> Motor vehicle

The BSA Ten is a small car manufactured for BSA Cars by BSA subsidiary The Daimler Company Limited. Announced in October 1932 first deliveries were delayed until February 1933. A cheaper and less well-finished version of the Lanchester Ten with a smaller side-valve engine of BSA design. An offering to try to meet the market of the Great Depression.

<span class="mw-page-title-main">Lanchester Fourteen</span> Motor vehicle

The Lanchester Fourteen Roadrider is a six-cylinder automobile introduced by the Lanchester Motor Company in the beginning of September 1936. It was named "Roadrider" for its special suspension features, and billed as the lowest-priced six-cylinder Lanchester ever offered. This car replaced the previous 12 hp Light Six model with a larger six-cylinder engine again in the Lanchester Eleven chassis and body.

The Rover Fourteen was a medium-sized family car and variants produced by the British Rover car company between 1924 and 1948. Civilian automobile production was interrupted in 1940 because of the war, but when the war ended in 1945, the Rover 14 returned to the market and remained available until replaced by the Rover 75 at the beginning of 1948.

<span class="mw-page-title-main">Vauxhall 23-60</span> Motor vehicle

The Vauxhall 23-60 is a four or five-seater touring car manufactured by Vauxhall of Luton that was announced in July 1922. The 23-60's standard tourer Kington body was described as "preserving that greyhound look so characteristic of the Vauxhall car". It shared many parts with Vauxhall's much more powerful 30-98.

<span class="mw-page-title-main">Vauxhall 20-60</span> Motor vehicle

The Vauxhall 20-60 is a four or five-seater saloon, limousine, tourer or coupé-cabriolet manufactured by Vauxhall of Luton. It was announced on 28 September 1927 with a six-cylinder engine and a four-speed gearbox. A cautious move downmarket. "The first time any six-cylinder Vauxhall has been sold under £1000!" "British & Vauxhall". The initial 2.7-litre engine was enlarged to 3-litres after twelve months.

<span class="mw-page-title-main">Morris Six (1928)</span> Motor vehicle

The Morris Six is a 2½-litre six-cylinder car with an overhead camshaft for its overhead valves first displayed at the October 1927 Motor Show at Olympia as Morris Light Six. When he bought Wolseley in February 1927 W R Morris gave Wolseley employees his reason. It was that he wanted to make good 6-cylinder cars and Wolseley could do that. He said he particularly admired their 2-litre Wolseley 16/45.

<span class="mw-page-title-main">Daimler Twenty-Two</span> Motor vehicle

Their new Daimler 22 horsepower full-size luxury car was first displayed by Daimler in April 1902 at The Automobile Club’s Exhibition in London's Agricultural Hall. Daimler had elected to drop their multiple old low powered designs and restrict themselves to this 22 horsepower and a pair of 9 or 12 horsepower cars to the same design as the 22 but more lightly constructed. The King’s not quite finished new Daimler 22 was reported to be the chief attraction of the show.

<span class="mw-page-title-main">Rover 9</span> Motor vehicle

The Rover 9 is a small car produced by Britain's Rover car company. It had a 1074 cc 9 fiscal horsepower four-cylinder engine. Manufactured from 1924 until 1927 it was first supplemented then replaced by Rover's 10-12 model.

The Rover Two-litre was a mid-size luxury open tourer, saloon or limousine produced from 1927 by the Rover Company of Coventry and available through to 1932. As usual the chassis was also available to coach builders.

The Hillman Straight Eight and its successor the Hillman Vortic were moderate priced mid-sized 20 tax-horsepower executive cars made by Hillman from 1929 to 1930. The lowest priced eight-cylinder car on the market the car was scarcely in full production when sales were hit by the onset of the Great Depression.

<span class="mw-page-title-main">Hanomag Rekord</span> Motor vehicle

The Hanomag Rekord is a mid-size car produced by Hanomag in Hannover from 1933 until 1940. The car was Hanomag's first mid-size model and one of the first mass-produced cars available with a diesel engine. Hanomag introduced the Rekord as the 6/32 PS intermediate model in autumn of 1933; the first car to bear the Rekord name followed shortly thereafter in February 1934. Compared with the 6/32 PS, the Rekords have a longer wheelbase, independent front suspension and different engine ancillaries. In 1937, the vehicle was updated with a new "streamlined" back, and the production of the diesel engine model commenced – prior to 1937, all Rekords were fitted with an Otto engine. In total, Hanomag built 19,104 Rekords.

References

  1. 1 2 3 4 5 6 7 8 9 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN   0-333-16689-2.
  2. 1 2 3 4 5 6 7 8 9 10 11 New Model Rover Motor-Car. The Times, Saturday, May 22, 1926; pg. 9; Issue 44278
  3. R Hough and M Frostick, Rover Memories, George Allen & Unwin, London, 1966
  4. 1 2 3 4 5 6 7 8 9 10 Cars Of To-Day. The Times, Tuesday, Dec 28, 1926; pg. 6; Issue 44464
  5. Eric Dymock, Rover: The First Ninety Years. One of Britain's Fine Cars 1904-1994, London, G T Foulis & Co, 1993 ISBN   0951875019
  6. 1 2 3 Rover Company Ltd. The Times, Tuesday, Aug 15, 1939; pg. 11; Issue 48384
  7. Cars Of 1937. The Times, Wednesday, Aug 19, 1936; pg. 8; Issue 47457
  8. Rover production total – since 1904 (as of 1 July 2004), rovercarclubaust.asn.au Retrieved 2 June 2015
  9. Cars of Today, The Times, Friday, Mar 18, 1938; pg. 6; Issue 47946.