Sea anchor

Last updated
A parachute sea anchor deployed. Sea Anchor (36776431450).jpg
A parachute sea anchor deployed.
A sea anchor before deployment. Ancre flottante.jpg
A sea anchor before deployment.
A marine parachute anchor bagged up, ready for use in a large yacht. ParaAnchor 01.jpg
A marine parachute anchor bagged up, ready for use in a large yacht.
A marine parachute anchor for a large yacht awaiting bagging up. ParaAnchor 02.jpg
A marine parachute anchor for a large yacht awaiting bagging up.
A conical sea anchor with tripline (from an illustration in The Sailors Handbook by Halsey C. Herreshoff). Droguedrawing.svg
A conical sea anchor with tripline (from an illustration in The Sailors Handbook by Halsey C. Herreshoff).
An early wooden drogue. Sea-anchor.jpg
An early wooden drogue.

A sea anchor (also known as a parachute anchor, drift anchor, drift sock, para-anchor or boat brake) is a device that is streamed from a boat in heavy weather. Its purpose is to stabilize the vessel and to limit progress through the water. Rather than tethering the boat to the seabed with a conventional anchor, a sea anchor provides hydrodynamic drag, thereby acting as a brake. Normally attached to a vessel's bows, a sea anchor can prevent the vessel from turning broadside to the waves and being overwhelmed by them.


Early sea anchors were crude devices, but today most take the form of a marine drogue parachute.[ clarification needed ] These are so efficient that they need a tripping line to collapse the parachute for retrieval. Being made of fabric, a sea parachute may be bagged and easily stowed when not in use.

A similar device to the sea anchor is the much smaller drogue, which is streamed from a vessel's stern in strong winds so as to slow the boat to prevent pitchpoling or broaching in an overtaking sea. The fundamental difference between the sea anchor and the drogue is that the drogue will slow the boat while keeping the heading steady, and is intended to be launched from the stern. The parachute anchor is designed to be launched from the bow and effectively stop the boat's progress relative to the current in an open sea.


Anything that can act as a source of sufficient stable drag in the water can act as a sea anchor; a common improvised drag device is a long line (a docking warp or anchor rope) payed out into the water; while this does not provide much drag, it can act as a drogue and aid in running downwind. [1] Adding items to increase drag can convert this to a sea anchor. A (floating) bucket tied to the end of the line works as a basic sea anchor. In The Sea-Wolf , author and sailor Jack London described using various broken spars and sails, tied to a line, as an improvised sea anchor. [2] A sail, weighed down with an anchor chain or other heavy object, will also work as an improvised sea anchor. [3]

Early sea anchors were often improvised from spare parts aboard ship. An 1877 book used by the United States Naval Academy describes methods of making sea anchors. These took the form of a wooden or metal framework forming a simple kite-like shape of sail canvas, backed with a net or closely spaced ropes to provide strength. A small anchor attached to one corner kept the sea anchor from twisting. If the framework was wooden, the wood's buoyancy kept the sea anchor just under the surface, while an iron framework used a buoy to keep it at the proper depth. [4]

Modern commercial sea anchors are usually made of cloth, shaped like a parachute or cone, and rigged so that the wider end leads and the narrower end trails. When deployed, this type of sea anchor floats just under the surface, and the water moving past the sea anchor keeps it filled. Some varieties are cylindrical, with an adjustable opening in the rear that allows the amount of braking to be adjusted when deployed. [5]

The size of the sea anchor determines how much water it can displace, and how much braking it can provide. It is also possible to use more than one sea anchor to increase the braking.

The 'series drogue' is a drogue (not a sea anchor) that allows the operator to increase or decrease the resistance by laying out more or less of a line with many small drag devices spread out along a line - this also serves to ease retrieval under heavy conditions. [6]

Most larger sea anchors will provide a mechanism to collapse the anchor for retrieval. This is called a trip line, and attaches to the rear of the anchor, allowing it to be pulled in back first, shedding water rather than filling. This trip line can be rigged a number of ways, depending on the preference of the user. [7]


Sea anchors can be used by vessels of any size, from kayaks to commercial fishing vessels, [8] and were even used by sea-landing naval Zeppelins in World War I. [9] While the purpose of the anchor is to provide drag to slow the vessel, there are a number of ways this can be used: [10]

The length and type of the line, or rope, used to attach the sea anchor to the bow is also important. In addition to connecting the sea anchor to the hull, the rope also acts as a shock absorber. The stretching of the rope under load will smooth out the changes in loading caused by the changing force of the waves interacting with the hull of the vessel. Because a high degree of stretch is desirable in this application, a material with a low elastic modulus is preferred, such as nylon. If there is no concern about breaking waves and the only reason the sea anchor is being used is to reduce drift from the wind, then you can use a short rope. If short rope is used on large ocean swells, its length should be tuned to the wavelength of the waves; either under 1/3 of the wavelength, or an integer multiple of the wavelength. A line significantly shorter than the wavelength means the anchor and hull will ride over the crests together, while a line equal to the wavelength will keep the hull and anchor from ending up out of phase, which can result in severe loading on the anchor. In stormy seas, and when breaking waves are a concern, it is important to not tune the rope length to the waves, so that the anchor and boat are not rolled by the same wave or by adjacent waves. The ability to absorb shock is even more important. Under these conditions, a rope as much as 10 to 15 times the length of the hull should be used to provide a high degree of shock absorption. [11]

See also

Related Research Articles

<span class="mw-page-title-main">Anchor</span> Device used to secure a vessel to the bed of a body of water to prevent the craft from drifting

An anchor is a device, normally made of metal, used to secure a vessel to the bed of a body of water to prevent the craft from drifting due to wind or current. The word derives from Latin ancora, which itself comes from the Greek ἄγκυρα.

<span class="mw-page-title-main">Hull (watercraft)</span> Watertight buoyant body of a ship or boat

A hull is the watertight body of a ship, boat, or flying boat. The hull may open at the top, or it may be fully or partially covered with a deck. Atop the deck may be a deckhouse and other superstructures, such as a funnel, derrick, or mast. The line where the hull meets the water surface is called the waterline.

<span class="mw-page-title-main">Sailing</span> Propulsion of a vehicle by wind power

Sailing employs the wind—acting on sails, wingsails or kites—to propel a craft on the surface of the water, on ice (iceboat) or on land over a chosen course, which is often part of a larger plan of navigation.

<span class="mw-page-title-main">Dinghy</span> Type of small boat

A dinghy is a type of small boat, often carried or towed by a larger vessel for use as a tender. Utility dinghies are usually rowboats or have an outboard motor. Some are rigged for sailing but they differ from sailing dinghies, which are designed first and foremost for sailing. A dinghy's main use is for transfers from larger boats, especially when the larger boat cannot dock at a suitably-sized port or marina.

<span class="mw-page-title-main">Buoy</span> Floating structure or device

A buoy is a floating device that can have many purposes. It can be anchored (stationary) or allowed to drift with ocean currents.

<span class="mw-page-title-main">Mooring</span> Any permanent structure to which a floating vessel may be secured to restrict movement on the water

A mooring is any permanent structure to which a seaborne vessel may be secured. Examples include quays, wharfs, jetties, piers, anchor buoys, and mooring buoys. A ship is secured to a mooring to forestall free movement of the ship on the water. An anchor mooring fixes a vessel's position relative to a point on the bottom of a waterway without connecting the vessel to shore. As a verb, mooring refers to the act of attaching a vessel to a mooring.

In underwater diving, open water is unrestricted water such as a sea, lake or flooded quarries. It is the opposite of confined water where diver training takes place. Open water also means the diver has direct vertical access to the surface of the water in contact with the Earth's atmosphere.Open water diving implies that if a problem arises, the diver can directly ascend vertically to the atmosphere to breathe air. Penetration diving—involving entering caves or wrecks, or diving under ice—is therefore not "open water diving". In some contexts the lack of a decompression obligation is considered a necessary condition for classification of a dive as an open water dive, but this does not affect the classification of the venue as open water.

<span class="mw-page-title-main">Boat building</span> Design and construction of floating vessels

Boat building is the design and construction of boats and their systems. This includes at a minimum a hull, with propulsion, mechanical, navigation, safety and other systems as a craft requires.

<span class="mw-page-title-main">Diving shot</span> Substantial weighted near-vertical line with buoy

A diving shot line, shot line, or diving shot, a type of downline or descending line, is an item of diving equipment consisting of a ballast weight, a line and a buoy. The weight is dropped on the dive site. The line connects the weight and the buoy and is used by divers to as a visual and tactile reference to move between the surface and the dive site more safely and more easily, and as a controlled position for in-water staged decompression stops. It may also be used to physically control rate of descent and ascent, particularly by surface-supplied divers.

<span class="mw-page-title-main">Drogue parachute</span> Parachute for high speed deployment

A drogue parachute is a parachute designed for deployment from a rapidly-moving object. It can be used for various purposes, such as to decrease speed, to provide control and stability, or as a pilot parachute to deploy a larger parachute. Vehicles that have used drogue parachutes include multi-stage parachutes, aircraft, and spacecraft recovery systems.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

<span class="mw-page-title-main">Dive boat</span> Boat used for the support of scuba diving operations

A dive boat is a boat that recreational divers or professional scuba divers use to reach a dive site which they could not conveniently reach by swimming from the shore. Dive boats may be propelled by wind or muscle power, but are usually powered by internal combustion engines. Some features, like convenient access from the water, are common to all dive boats, while others depend on the specific application or region where they are used. The vessel may be extensively modified to make it fit for purpose, or may be used without much adaptation if it is already usable.

<span class="mw-page-title-main">Drogue</span> Drag device streamed behind a vessel

A drogue is a device trailed behind a boat on a long line attached to the stern. A drogue is used to slow the boat down in a storm and to prevent the hull from becoming side-on to the waves. A boat that has deployed a drogue should not overspeed down the slope of a wave and crash into the next one, nor will the vessel broach. By slowing the vessel, the drogue makes the vessel easier to control in heavy weather and will help to prevent pitchpoling.

Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to-trough dimension (height) increases as well. When hull speed is exceeded, a vessel in displacement mode will appear to be climbing up the back of its bow wave.

<span class="mw-page-title-main">Rowing</span> Act of propelling a boat using oars

Rowing is the act of propelling a human-powered watercraft using the sweeping motions of oars to displace water and generate reactional propulsion. Rowing is functionally similar to paddling, but rowing requires oars to be mechanically attached to the boat, and the rower drives the oar like a lever, exerting force in the same direction as the boat's travel; while paddles are completely hand-held and have no attachment to the boat, and are driven like a cantilever, exerting force opposite to the intended direction of the boat.

<span class="mw-page-title-main">Waterline length</span> Size of a ship

A vessel's length at the waterline is the length of a ship or boat at the level where it sits in the water. The LWL will be shorter than the length of the boat overall as most boats have bows and stern protrusions that make the LOA greater than the LWL. As a ship becomes more loaded, it will sit lower in the water and its ambient waterline length may change; but the registered L.W.L it is measured from a default load condition.

<span class="mw-page-title-main">Heaving to</span> Way of slowing a sailing vessels forward progress

In sailing, heaving to is a way of slowing a sailing vessel's forward progress, as well as fixing the helm and sail positions so that the vessel does not have to be steered. It is commonly used for a "break"; this may be to wait for the tide before proceeding, or to wait out a strong or contrary wind. For a solo or shorthanded sailor it can provide time to go below deck, to attend to issues elsewhere on the boat or to take a meal break. It is also used as a storm tactic.

<span class="mw-page-title-main">Sailing yacht</span> Private sailing vessel with overnight accommodations

A sailing yacht, is a leisure craft that uses sails as its primary means of propulsion. A yacht may be a sail or power vessel used for pleasure, cruising, or racing. There is no standard definition, so the term applies here to sailing vessels that have a cabin with amenities that accommodate overnight use. To be termed a "yacht", as opposed to a "boat", such a vessel is likely to be at least 33 feet (10 m) in length and have been judged to have good aesthetic qualities. Sailboats that do not accommodate overnight use or are smaller than 30 feet (9.1 m) are not universally called yachts. Sailing yachts in excess of 130 feet (40 m) are generally considered to be superyachts.

<span class="mw-page-title-main">Submarine pipeline</span> Pipeline that is laid on the seabed or below it inside a trench

A submarine pipeline is a pipeline that is laid on the seabed or below it inside a trench. In some cases, the pipeline is mostly on-land but in places it crosses water expanses, such as small seas, straits and rivers. Submarine pipelines are used primarily to carry oil or gas, but transportation of water is also important. A distinction is sometimes made between a flowline and a pipeline. The former is an intrafield pipeline, in the sense that it is used to connect subsea wellheads, manifolds and the platform within a particular development field. The latter, sometimes referred to as an export pipeline, is used to bring the resource to shore. Sizeable pipeline construction projects need to take into account many factors, such as the offshore ecology, geohazards and environmental loading – they are often undertaken by multidisciplinary, international teams.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".


  1. Beth A. Leonard & Evans Starzinger. "Heavy Weather Esswntials" (PDF).
  2. London, Jack. The Sea Wolf. e-text at Project Gutenberg.
  3. "Sailing Multihulls in Heavy Weather".
  4. Stephen Bleecker Luce (1877). Seamanship. United States Naval academy, Annapolis. pp.  279–280.
  5. "Para-Tech parachute drogues".
  6. "Para anchor vs series drogue". Retrieved 10 August 2020.
  7. "Trip lines". 17 October 2017. Retrieved 10 August 2020.
  8. "FPSO / Oil rig sea anchor". Retrieved 10 August 2020.
  9. Lehmann Chapter VI
  10. "PARA-TECH DELTA Drogue: Four uses for drogues". 17 October 2017. Retrieved 10 August 2020.
  11. "Sea Anchor FAQ'S: Rope".