Seddon Atkinson Ltd had risen to prominence in the UK bus and coach market in the late 1960s with the Pennine 4 front-engined lightweight chassis and then the Gardner-powered Seddon Pennine RU rear-engined bus. In 1970 Leyland announced it was to cease making the Leopard PSU3/3R, which version had a Leyland manual gearbox and the 140bhp O600H engine. All future Leopard production was to be of models with the larger O680H engine and the Pneumocyclic semi-automatic gearbox. Scottish Bus Group were by this time the only purchaser of the old variant, they stated they would not buy semi-automatic Leopards and regarding the O680H as too thirsty tried to persuade Leyland to fit the Gardner horizontal engine in the Leopard. Leyland (having had less than full value from previous SBG specials)[1] declined.
As a result, dismayed by the monopoly position British Leyland now enjoyed,[2] by 1972 Scottish Bus Group had approached Seddon Atkinson; at the same time they were working with Ailsa, the Irvine-based Volvo truck importer, on a new type of double-deck underframe. Collaboration with SBG resulted in rapid development. After one prototype, production commenced with the first example bodied and delivered in October 1973;[3] the last entered service after a run of 527 chassis in 1982.[4]
No replacement was produced, thus Seddon's involvement with bus manufacture ended with the Pennine 7.
Chassis description
The Seddon Pennine 7 featured a ladder-frame chassis with channel-section longitudinals and tubular cross-members, available to either 5.6m wheelbase for 11m bodies or (from 1975) 6m wheelbase for 12m bodies. It was horizontal in elevation but only parallel in plan over the leaf-sprung front and rear axles; the nearside member was in-swept at the front to allow a wider low-entrance area, and the offside member was outswept in the wheelbase to allow ready access to the Gardner engine and its auxiliaries. The frame did not continue aft of the rear axle-mounting,[5] collaboration with SBG's preferred supplier Walter Alexander Coachbuilders meant there was no worry about the body builder providing a strongly cantilevered rear overhang capable of supporting a capacious luggage boot, especially after Alexander's switch back (from 1967 to 1972) to aluminium alloy body framing. Power steering was standard. The prototype (carrying a late body by Seddon's Pennine Coachcraft subsidiary) had a Self-Changing Gears semi-automatic gearbox, but production variants were initially to be fitted with a four-speed ZF synchromesh unit, coach versions having a higher ratio final drive allowing a 76mph maximum speed, 56mph being the designed maximum for bus versions, better acceleration and more flexible performance ensuing with the low ratio back axle.
Customers
It was a chassis commissioned by Scottish Bus Group but only two of its subsidiaries bought the type. Eastern Scottish took 301 (over 57% of production) and Western SMT 213 (over 40%). Most of these were bodied by Alexander but Eastern Scottish took 64 from 1978 to 1981 with Plaxton Supreme III or IV Express bodies, the first ever Plaxton bodies for the SBG.[6] Buses carried the Alexander AY or AYS body and (non-Plaxton) coaches either the AY or AT (Alexander T-Type) body, coaches generally had 49 seats and buses 53, although some of Eastern's touring coaches had 45 reclining seats, generally in the rather bus-like AY body. All of SBG's 11 metre Seddons qualified for New Bus Grant.
The Pennine 7 was originally envisaged just as an 11-metre bus or coach, which meant it was suitable for the UK government's New Bus Grant. In 1974, pleased with the initial batch, Eastern Scottish commissioned a longer version to carry the exclusive and luxurious Alexander M-Type coach body. At the time Anglo-Scottish express services were expanding, and whilst previously Western and Eastern Scottish were the only operators to work to London, Alexander (Fife), and Alexander (Northern) were to gain routes from respectively Kirkcaldy (Fife), Aberdeen and Dundee (Northern) to London. Orders for the new (third series) M-type coaches went to three chassis suppliers, Leyland, Seddon and Volvo, previously Western and Eastern Scottish had chosen a special version of the Bristol RE for M-type bodies but coach variants of the RE were axed earlier in 1974, the final 12-metre examples having gone to United Automobile Services earlier that year.[7] Western Scottish chose the Volvo B58-61, built in Sweden but imported to the UK by Ailsa Bus in Western Scottish's operating area, the coaches for the Alexander companies would be Leyland Leopard PSU5/4R (with O680 engines and 5-speed Pneumocyclic transmission). Eastern Scottish chose the new version of the Pennine 7, unlike previous versions the 12-metre Pennine 7 as commissioned by Eastern Scottish had a 6-speed ZF synchromesh gearbox, top speed was alleged to be 87mph, the same as the 256bhp Volvos of Western with the same gearbox. As circumstances turned out Eastern Scottish initially took four Leopards in the yellow and black colours of their previous M-types for almost a year before its Seddons were completed, then passing the Leylands on to the Alexander companies. When the Seddons did arrive at the end of 1975 they introduced a new blue and white livery which became standard within SBG for services to London until the mid 1980s. This featured ¾ of a Saltire flag and the single word SCOTTISH on the side. Soon all SBG M-types were painted thus, although at the time every other bus or coach in the Scottish Bus Group ran in the individual operator's own colours contrary to the rigid corporate branding approach of their English and Welsh counterpart.
With the Volvo B58, Leyland Leopard and AEC Reliance supplying the premium-coach class, and with Bus and Car of Belgium, DAF and Mercedes-Benz also offering coaches (the former with a right-hand drive version of the Trailways (USA) coach), the Pennine 7 began to attract orders from private operators, all but one with Plaxton Supreme bodies, the first 12m example went to Smith of Wigan late in 1975 with an early Supreme III C50F body. Sworder of Walkern, Hertfordshire had a 57-seater, Young of Rampton, Cambridgeshire and Scotts Greys, Darlington took two 57 seaters. Tally Ho! of Kingsbridge Devon got 53 seaters on 12m coaches, OK Motor Services were the only independent to take a Pennine 7 to bus grant specification an 11m Supreme II Express with 53 seats. The final Seddon Pennine 7 bodied was BNC334Y which carried a mildly restyled 11m Willowbrook 003 coach body seating 42 with a toilet compartment, this went to Johnson of Oldham after Pennine 7 production had ceased, the dealer who had supplied it hoped to attract orders for similar coaches on Dennis Dorchester chassis which did not ensue.[8] The London Borough of Brent bought an 11m express-doored Plaxton Supreme example in 1980 for its school transport fleet.
Other than Alexander, Plaxton and Willowbrook the only other body on a new Pennine 7 was by Pennine Coachcraft, this was the prototype, and until their 1979 deliveries (when the two SBG subsidiaries changed their minds on gearboxes) the only one with a Self-Changing Gears transmission. In late 1974 it was completed to full-PSV standards, fitted with 49 semi-coach seats and finished in National Bus Company leaf-green and white bus colours; it was licensed for the first time as UBU72N and sent to Crosville to help them to cover the remedial body and chassis work on the 100 Seddon Pennine RU owned by them, after the rebuilding work was finished it remained with Crosville and was retired after eleven years service, no further Seddons were purchased by NBC.
Eastern Scottish's variants were used on bus, long-distance express services and tours, and were not generally withdrawn early. Western used its similarly but had always had a shorter-life policy for its vehicles and the first of their Pennine 7s were offered for sale at around the seven year mark, four of its early T-type coaches were converted for wheelchair access, with 24 seats and a central wheelchair lift spreading the type to Central and Midland Scottish. Central Scottish's example is at the Glasgow Vintage Vehicle Trust's Bridgeton garage where restoration has started. When new SBG subsidiaries were established in 1985 and Eastern lost its westernmost garages, Kelvin, Midland, Central, Clydeside and Lowland Scottish inherited Pennine 7s, Kelvin ridding itself of them as early as it could as it attempted standardisation. Not as well known as the Leopard, they sold less quickly on the second-hand market but operators including Stevensons of Uttoxeter and Burton and North Eastern Bus Service of Newcastle standardised on the Seddon for deregulated bus work. The last examples saw out the turn of the century with Allander, Milngavie on school contracts and with Morley, Whittlesey on rural Cambridgeshire services.
Problems in operation
Drivers, particularly coach drivers, felt the Pennine 7 was over-geared, starting-off smoothly from rest sometimes causing trouble, overheating was another early fault, the radiator was mounted directly in front of the engine in mid-wheelbase and was thus shrouded by the coachwork, and in common with many Gardner-engined vehicles the throttle-pedal was regarded as hard to operate.[9] The power-steering took several modifications and adjustments to work properly.
Morley's of Whittlesey found their three astonishingly economical, the high-geared one of the trio (RSD978R) averaging 21 miles per gallon, whilst the two-lower geared examples (NSJ19R & NSJ21R) still achieved 18mpg.[10]
In retrospect
SBG did not fulfil Seddon's dreams. Leyland offered SBG alone a four-speed ZF manual option on Leopard which was taken between 1974 and 78 by Central, Western Scottish and the Alexander companies. Total Pennine 7 production over a decade was less than a year's Leopard production.
From 1980, the six-speed ZF was offered with the Leopard on general sale, but SBG were, by that time, taking the Pneumocyclic.
Western and Central Scottish took the later and similar Dennis Dorchester, and they, Clydeside, Lowland, Northern, and Eastern Scottish took Gardner-engined variants of the Leyland Tiger, by the mid-1980s: a much-weakened Leyland could not refuse SBG's engine preferences.
Survivors
A number of Seddon Pennine 7s have been preserved and are stored at bus museums in Scotland. Among preserved examples one of the Eastern M types survives at the Scottish Vintage Bus Museum. MSF750P is the only Alexander M-Type bodied coach fully restored. Y-type, T-type and Plaxton-bodied examples also survive, some preserved, some in non-psv roles. Only one Pennine 7 is known to have been rebodied, former Western MSJ388P which was purchased by a Lancashire businessman in the late 1980s for conversion into a racing car transporter, the Alexander T-type body proved unsound so the businessman, Andrew Wareing, asked Duple to rebody it, they politely declined, having never bodied the type, so one of Mr Wareing's employees, aided by a friend who worked at Duple, were tasked with building a new body which features a number of Duple 320 components, this vehicle, re-registered 5887AW, has been in use as a car transporter for over 20 years.[11]
Former Western Scottish Y Type BSD 857T has been converted into a motorcaravan.[12]
On television
Two former Eastern Scottish Seddon Pennine 7s featured in the BBC Scotland play Donovan Quick.
Related Research Articles
Central Scottish Omnibuses Ltd was a bus operating subsidiary of the Scottish Transport Group formed in June 1985 from Central SMT, and operated until July 1989 when it was merged with Kelvin Scottish to form Kelvin Central Buses.
The Dennis Dominator was Dennis's first rear-engined double-decker bus chassis, it was launched in 1977.
The Volvo B7TL is a low-floor double-decker bus chassis which was launched in 1999 and replaced the 2-axle version of the Volvo Olympian. It was built as the British bus operators seemed hesitant to purchase the B7L double decker with a long rear overhang.
Seddon Atkinson Vehicles Limited, a manufacturer of large goods vehicles based in Oldham, Greater Manchester, England, was formed after the acquisition in 1970 of Atkinson Vehicles Limited of Preston by Seddon Diesel Vehicles Limited of Oldham. In 1974, the firm was acquired by International Harvester, which sold it in March 1984 to the Spanish group Enasa which made it a subsidiary of Pegaso. In 1990, it became part of Iveco which used the brand for various types of specialised vehicles in the United Kingdom. The range of models produced included EuroMover, Pacer and Strato, which are aimed at refuse collection, recycling and construction operators.
The Leyland Titan was a forward-control chassis with a front-mounted engine designed to carry double-decker bus bodywork. It was built mainly for the United Kingdom market between 1927 and 1942, and between 1945 and 1969.
Duple Coachbuilders was a coach and bus bodybuilder in England from 1919 until 1989.
The Volvo Ailsa B55 was a front-engined double-decker bus chassis manufactured in Scotland by Ailsa, Volvo's British subsidiary in which it owned 75%, from 1974 until 1985.
The Volvo Olympian was a rear-engined 2-axle and 3-axle double decker bus chassis manufactured by Volvo at its Irvine, Scotland factory. The first was built in 1992 and entered production in March 1993, replacing the Leyland Olympian.
The Leyland Leopard was a mid-engined single-decker bus and single-decker coach chassis manufactured by Leyland between 1959 and 1982.
The Leyland Tiger, also known as the B43, was a mid-engined bus and coach chassis manufactured by Leyland between 1981 and 1992. This name had previously been used for a front-engined bus built between 1927 and 1968. It replaced the Leyland Leopard, which had been in production for over 20 years.
The Plaxton Panorama Elite was a successful design of coach bodywork built between 1968 and 1975 by Plaxton of Scarborough, Yorkshire, England. A wide-doorway variant called the Plaxton Elite Express was also built. Collectively, they are commonly referred to as the Plaxton Elite.
The Duple Dominant was a design of a coach bodywork built by Duple between 1972 and 1987. It introduced an all-steel structure and replaced the wooden-framed Duple Vega, Viceroy and Vista models.
The Leyland Tiger Cub was a lightweight underfloor-engined chassis manufactured by Leyland between 1952 and 1970.
The Leyland Panther Cub was a rear-engined single-decker bus manufactured by Leyland from 1964 until 1968.
The Albion Aberdonian was an underfloor-engined bus designed and manufactured by Albion Motors between 1957 and 1960, it was introduced as a longer derivative of the Albion Nimbus.
The Albion Nimbus was an underfloor-engined, ultra-lightweight midibus or coach chassis, with a four-cylinder horizontal diesel engine and a gross vehicle weight of six tons. It was largely operated on light rural bus duties and private hires. Operators who used it on heavy-duty bus routes found it insufficiently robust. It was the first Albion bus chassis to have a name that did not begin with the letter V. The design was revised twice and was produced from 1955 to 1965.
The Seddon Pennine RU was a rear-engined single-decker bus built by Seddon Diesel Vehicles/Seddon Atkinson between 1969 and 1974.
The Leyland Royal Tiger Worldmaster, sometimes simply known as the Leyland Worldmaster, was a mid-underfloor-engined single-decker bus or single-decker coach chassis manufactured by Leyland between 1954 and 1979.
The Bristol LH was a single-decker bus chassis built by Bristol Commercial Vehicles (BCV) in Bristol, England. Nearly 2,000 were built between 1967 and 1982 in a variety of sizes and body types, including some as goods vehicles.
The Albion Lowlander was a Scottish-built low-height double-decker bus.
References
Books
Hillditch, A Further Look at Buses, Shepperton, 1981
Booth, The British Bus, Today and Tomorrow, Shepperton, 1983
Curtis, Bus Monographs 5: Bristol RE, Shepperton, 1987
Brown, Plaxton a Century of Innovation, Hersham, 2007
Magazines
Parke (ed), Buses, Shepperton, passim 1972-81
Parke (ed), Buses Extra, Shepperton, passim 1977-81
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
