In 2013, Sigma announced that the lens would be replaced by a redesigned model designated as the Sigma 30mm f/1.4 DC HSM A; the new lens went on sale in March of that year in Canon, Nikon, and Sigma mounts.[1]
Its large aperture allows for a shallow depth of field, allowing good isolation of close subjects. On APS-C sensor cameras, its field of view equivalent to that of a 46mm lens (Nikon DX, Pentax, Sony, current Sigma bodies), 48mm lens (Canon), 51mm lens (older Sigma bodies) or 60mm lens (Four Thirds). On the Four-Thirds mount, it is the only affordable normal, large aperture lens, therefore it is popular lens on that format.
The Sigma 30mm f/1.4 EX DC HSM lens has unusual optical properties. With most photographic lenses, vignetting is drastically reduced by stopping down the aperture by about 1 f-stop. This lens has a more linear response to stopping down the aperture. To reduce vignetting by about one half, it is required to stop down the aperture by over 3 full f-stops. The optical resolution properties of this lens are also unique. Most lenses are typically sharp in the center of the image frame, and softer in the edges. This problem is typically solved by stopping down the lens. This lens has little response to such an effort. When stopped down by over 4 stops, the edges of the frame are still soft. However, the center resolution of the lens is high when used wide open, and becomes exceedingly high when the lens is stopped down.[2][3]
Sigma Corporation is a Japanese company, manufacturing cameras, lenses, flashes and other photographic accessories. All Sigma products are produced in the company's own Aizu factory in Bandai, Fukushima, Japan. Although Sigma produces several camera models, the company is best known for producing high-quality lenses and other accessories that are compatible with the cameras produced by other companies.
The Pentax K-mount, sometimes referred to as the "PK-mount", is a bayonet lens mount standard for mounting interchangeable photographic lenses to 35 mm single-lens reflex (SLR) cameras. It was created by Pentax in 1975, and has since been used by all Pentax 35 mm and digital SLRs and also the MILC Pentax K-01. A number of other manufacturers have also produced many K-mount lenses and K-mount cameras.
This article details lensesfor single-lens reflex and digital single-lens reflex cameras. The emphasis is on modern lenses for 35 mm film SLRs and for "full-frame" DSLRs with sensor sizes less than or equal to 35 mm.
Pentax lenses were first badged as Takumar. The Takumar branded lenses were well respected for their line of Super Takumar, which designated the high performance coating applied to the lens as well as the optical formulas used to make them. The majority of the industry at the time was still satisfied with the variations of the "plumb" coating process and later some of the two and three layer processes as well. Asahi Pentax soon introduced the Takumar Super-Multi-Coated line of lenses which was a 7 layer process as the industry had just caught up with similar forms of 5 layer multi-coated optics. Eventually Asahi Optical and Pentax slowly shifted much of their lens production under the Pentax name and transitioned some of the successful designs that were first introduced under the Takumar name to use Asahi/Pentax badging as well as beginning to use the "smc" abbreviation. Eventually the Asahi partnership disappeared and the Pentax name became solely used. Pentax lenses saw many feature changes to answer the market, such as: incorporating "Auto-Aperture" with the M42, the light weight and compactness with the 'M' series, Aperture Priority overrides with the 'A' series, and Auto-Focus with the 'F' series. Modern Pentax lenses for digital SLR cameras have seen the elimination of the aperture ring completely as found on Pentax DA and D-FA series lenses. They use the Pentax KAF mount. All of these lenses have an autofocus feature, either operated from the camera body or from an internal SDM motor. Pentax compatible lenses are also made by third-party companies.
The Sigma 50mm f/1.4 EX DG HSM is a normal prime lens made by the Sigma Corporation.
The Sigma 150mm f/2.8 APO Macro EX DG HSM is a telephoto macro prime lenses made by Sigma Corporation.
The Sigma 18-50mm f/2.8 EX DC Macro is a wide to normal angle, zoom lens made by the Sigma Corporation.
The Sigma 12-24mm f/4.5-5.6 EX DG HSM is a professional-level wide-angle zoom lens made by Sigma Corporation. At launch it was the widest rectilinear lens available for full-frame 35mm SLR cameras, providing a field of view of 122 degrees. It has since been surpassed by the Canon EF 11-24mm f/4L zoom lens and the Irix 11mm f/4, a manual focus prime lens. The Sigma 12-24 has low distortion even compared to less wide zooms like the Canon EF 16-35mm lens.
The Sigma 4.5mm f/2.8 EX DC circular fisheye is a photographic lens manufactured by Sigma Corporation. It is a circular fisheye lens, designed to project a 180-degree field of view in all directions onto a circular image. It is the first such lens to provide the complete circular fisheye effect on crop factor digital SLR cameras, which do not have a full 36x24mm sensor. This lens is available in Canon, Nikon, Sigma, Pentax and Sony mounts.
The Sigma 10mm f/2.8 EX DC fisheye is a photographic lens manufactured by Sigma Corporation. It is a diagonal fisheye lens. Unlike most fisheye lenses, this lens is designed for digital SLR cameras that do not have a full 36x24mm sensor. This results in a much greater fisheye effect than is possible when a full-frame fisheye lens is used with a smaller sensor. The projection type of this lens is equidistant
The Sigma APO 180mm F3.5 EX DG lens was a telephoto/macro lens produced by Sigma Corporation. It contained two SLD glass elements to provide correction for chromatic aberration and was aimed toward advanced consumers.
The 18-50mm f/2.8-4.5 DC OS HSM is a wide-angle zoom lens produced by Sigma Corporation. The lens has four different variates, fitting on the Canon EF mount, Pentax K mount, Minolta A-mount, and the Nikon F-mount. It features internal focusing and internal zooming, as well as two SLD elements and three aspherical lenses.
The Sigma 8–16mm lens is an enthusiast-level, ultra wide-angle rectilinear zoom lens made by Sigma Corporation specifically for use with APS-C small format digital SLRs. It is the first ultrawide rectilinear zoom lens with a minimum focal length of 8 mm, designed specifically for APS-C size image sensors. The lens was introduced at the February 2010 Photo Marketing Association International Convention and Trade Show. At its release it was the widest viewing angle focal length available commercially for APS-C cameras. It is part of Sigma's DC line of lenses, meaning it was designed to have an image circle tailored to work with APS-C format cameras. The lens has a constant length regardless of optical zoom and focus with inner lens tube elements responding to these parameters. The lens has hypersonic zoom autofocus.
The Sigma 35 mm f/1.4 DG HSM Art is a wide-angle prime lens made by the Sigma Corporation. The lens was announced at the 2012 photokina trade fair.
The Sigma 30mm F1.4 DC DN Contemporary lens is a fixed maximum aperture standard prime lens for Sony E, Micro Four-Thirds, Canon EF-M, and Leica L mounts, announced by Sigma in February 2016.
The Sigma 19mm F2.8 EX DN lens is a wide-angle prime lens for Sony E and Micro Four-Thirds mounts, announced by Sigma in January 2012. Along with the Sigma 30mm F2.8 EX DN, it was part of the first release of Sigma lenses for compact interchangeable lens cameras, and hence the inception of the "DN" line, created by Sigma to cater to these cameras, an offering that in January 2013 was expanded with another lens, the Sigma 60mm f/2.8 DN Art.
The Sigma 30mm F2.8 EX DN is a standard prime lens for Sony E and Micro Four-Thirds mounts, announced by Sigma in January 2012. Along with the Sigma 19mm F2.8 EX DN, it was part of the first release of Sigma lenses for compact interchangeable lens cameras, and hence the inception of the "DN" line, created by Sigma to cater to these cameras, an offering that in January 2013 was expanded with another lens, the Sigma 60mm f/2.8 DN Art.
Sigma 60mm F2.8 DN Art lens is a standard prime lens for Sony E and Micro Four-Thirds mounts, announced by Sigma on January 29, 2013. It was only the third interchangeable lens brought to market by Sigma for a digital mirrorless camera, and the second time doing so.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
No
Yes (not available with Pentax and Sony mount)
No
