The EF lens mount is the standard lens mount on the Canon EOS family of SLR film and digital cameras. EF stands for "Electro-Focus": automatic focusing on EF lenses is handled by a dedicated electric motor built into the lens. Mechanically, it is a bayonet-style mount, and all communication between camera and lens takes place through electrical contacts; there are no mechanical levers or plungers. The mount was first introduced in 1987.
Canon claims to have produced its 100-millionth EF-series interchangeable lens on April 22, 2014.[1]
History
Number of Canon EF lenses sold over time (red), compared with Nikon F mount lenses (blue)
The EF mount replaces its predecessor, the FD mount. The standard autofocus lens mounting technology of the time used a motor in the camera body to drive the mechanics of the focus helicoid in the lens by using a transfer lever. The key innovation of the EF series was to use a motor inside the lens itself for focusing. This allowed for autofocusing lenses which did not require mechanical levers in the mount mechanism, only electrical contacts to supply power and instructions to the lens motor. The motors were designed for the particular lens they were installed in.
The EF mount reversed the mechanical logic of the FD mount. The FD mount provided the three-eared bayonet fitting on the camera body, and each FD lens provided a breech-lock receptacle to register and fasten the lens to the bayonet. The EF mount reverses this logic, providing the bayonet on each lens, and a receptacle on the camera body.
When the EF mount was introduced in 1987, it had the largest mount diameter (54mm internal) among all 35mm SLR cameras.[2]
The EF series includes over eighty lenses, encompassing focal lengths from 8 to 1200mm. Many EF lenses include such features as Canon's ultrasonic motor (USM) drive, an image stabilization system (IS), diffractive optics (DO) and, particularly for L-series lenses, fluorite and aspherical lens elements.
Versatility
The EF mount of a Canon EOS 50Electronics of an EF-S lens
Its large diameter and relatively short flange focal distance of 44.0mm allows mechanical adaptation of EF camera bodies to many types of non-EF lenses.[3] It is possible to mount lenses using the Nikon F mount, Olympus OM, Leica R and universal M42 lens mounts (among others) by the use of a mechanical adapter without electronic control of the aperture or autofocus. In contrast, parfocal adaptation of EF lenses to non-EF camera bodies is not possible with only a mechanical adapter that does not contain optical elements.
EF mount lenses are somewhat compatible with newer Canon bodies, though the reverse is not true:
EF-S lens mount cameras can mount EF lenses without an adapter
RF mount cameras can mount EF lenses with a variety of adapters
Lenses for the earlier Canon FD lens mount are not usable for general photography on an EF mount cameras, unless adapters with optical elements are used because they are made for a flange focal distance of only 42.0mm. Most of these lenses require autofocus and aperture motors inside the body which isn't available in EOS bodies. Infinity focus would be lost with an adapter which lacks optical elements. The Canon FD-EOS adapter is rare and is only usable with certain FD telephoto lenses. With a manual connection, the aperture and focus controls of the lens cannot be controlled or read from the camera; the lens must be focused manually. Since the only possible metering is through-the-lens, the lens must be manually stopped down to accurately meter at anything less than full aperture. (This is called stop-down metering.)
Third-party lenses
Compatible third-party lenses with the EF lens mount are manufactured by Yongnuo, Samyang, Schneider, Sigma, Tamron, Tokina, Cosina and Carl Zeiss. The manufacturers of these lenses have reverse engineered the EOS electronics—except Zeiss, which does not have the rights to use the autofocus or the electronic aperture control of EOS cameras [citation needed]. The use of these third-party lenses is not supported by Canon. Sometimes compatibility problems arise, as no third party has access to Canon's specifications for camera-to-body communication.[5] These compatibility issues mostly occur when using a newer body with an older third-party lens. Over time, most of these issues have been resolved by the major third-party brands.
Third-party cameras
Due to the high market penetration of EF-mount lenses, other camera manufacturers began to offer EF-mount cameras. Since the EF-mount was created for SLR cameras with their long focal flange distance, mirrorless interchangeable-lens cameras can use EF lenses with a mechanical adaptor that bridges the distance.
Red Digital Cinema Company offers various camera models that can be equipped with an electronic EF-mount. Many Blackmagic Design cameras are sold in EF-mount variants. For Sony E-mount various adaptors enable using EF-mount lenses with full electronic control.
Controls and features
An EF lens showing its different controls and features
Canon EF lenses typically have a number of controls, switches and physical features, used by the photographer to control the lens. The types and number of the controls can vary from lens to lens. With the most basic lenses having only a few, to the most complex having over a dozen different controls and switches.
This is a list of the different controls and switches found on most Canon EF lenses, along with a detailed description on what they are used for.
Lens mount index: This raised, round red mark is found on all EF lenses. It is used for matching the EF lens mount to the mount on an EOS body, so one can connect the lens to the body quickly.
Focusing ring: This control, found on most EF lenses, is used for focusing the lens. It is usually a ring on the lens body, that can be turned.
Zoom ring: This control is found on most EF zoom lenses. It is used for changing the focal length of the lens. The zoom ring usually has certain, common, focal lengths marked on it. To set the zoom ring to any given focal length, one must turn the ring so that the marked focal length matches the zoom index. The zoom index is typically a white, or black, line found next to the zoom ring.
Distance scale of an EF lens
Distance scale window: This feature is found on many EF lenses. This feature, while not a control or switch, is useful to the photographer for determining, or setting, the lens's focus distance. It is used in conjunction with the Focusing ring. When rotated, the distance scale will also rotate to show the changing focus distance. On some lenses the distance scale also has an infrared index. These are shown as red markings below the distance scale. This is used for making focus adjustments when the photographer is doing infrared photography, as lenses typically focus infrared light at a different point than visible light, and therefore achieving correct focus using visible light will result in an out-of-focus infrared image. To make an adjustment, first focus the subject, then turn the Focusing ring so it matches the corresponding infrared index mark.
Focus mode, and focusing range switches
Focus mode switch: This switch is found on most EF lenses that have an autofocus feature. It is used for setting the lens to either autofocus mode, or manual focus. When set to autofocus mode (AF), the lens will autofocus when directed to by the camera. When set to manual focus (MF), the lens is focused using the Focusing ring. Some lenses support full-time manual focusing (FT-M), which allows the photographer to focus the lens manually even with the mode switch set to AF, without damaging the lens (as could happen if a lens without FT-M is manually focused while in AF mode).
Focusing distance range limiter switch: This switch is found on most longer focal length lenses, and macro lenses. It is used for limiting the focusing distance range of the lens when using it in autofocus mode. Most lenses have two settings; these are usually full focus range (from minimum focus distance to infinity), and distant focus range (from halfway point of focus range to infinity). Other lenses have three settings, with the additional setting usually being near focus range (from minimum focus distance to halfway point of focus range). Longer focal length lenses and macro lenses have a relatively long travel distance for the focusing mechanism inside the lens; this feature shortens the autofocus time. When the photographer knows they will not need a certain part of the focus distance range, limiting it will help shorten the autofocus time, and possibly prevent "focus hunting".
Soft focus ring: This ring is found only on the 135mm 'Soft Focus' prime lens, and enables a variable soft focus effect from completely sharp (0) to very soft (2), although it has little effect when used with apertures over f/5.6. Although the ring can be set to any position, two 'stops' are implemented at positions 1 and 2.
Both types of image stabilizer switches
Image stabilizer switch: This switch is found on all EF lenses that feature an image stabilizer. It is used for turning the image stabilizer "on"( | ), or "off"( o ).
Image stabilizer mode switch: This switch is found on many EF lenses that feature an image stabilizer, particularly those of longer focal lengths. The switch has two settings on most lenses: Mode 1 and Mode 2. The newest IS Mark II versions of certain EF super telephoto lenses (the 300mm f/2.8L,[6] 400mm f/2.8L,[7] 500mm f/4L,[8] and 600mm f/4L[9]), plus the 200–400mm f/4L IS[10] and 100–400mm f/4–5.6L IS II,[11] have a third setting, Mode 3. Mode 1 is normal mode, used for typical photography, where the subject does not move. Mode 2 is used for panning; this is useful for sports or wildlife photography, where the subject moves constantly and one will need to pan. Mode 3, intended to track action, is similar to Mode 2 in that it ignores panning; however, it only applies stabilization when the shutter is released—the viewfinder image is not stabilized.[9] One should not use Mode 1 for panning as this will typically cause blurred photographs; the image stabilizer will attempt to correct for all motion, including the panning motion, but cannot do so due to the limited range of motion of the IS mechanism. Older lenses that have an image stabilizer, but do not feature this switch, are permanently in Mode 1. Some newer lenses, such as the Canon EF-S 18-200mm lens, are able to detect if they are being panned in either axis and will automatically disable the stabilization for the axis parallel to movement and therefore do not require this switch.
Autofocus stop buttons: These buttons are found on some super telephoto EF lenses, evenly spaced around the front collar of the lens. They are used for temporarily stopping the autofocus feature of the lens. Only one button needs to be pressed to activate the feature. To use this button, one must first have the autofocus active, then when one wishes to halt autofocus, one presses and holds the button. To resume autofocus, one releases the button. Some newer bodies allow these buttons to be assigned to perform other functions; for instance, the Canon EOS 7D allows the photographer to set these buttons to perform any of six functions.
Focus preset: The focus preset feature is found on most super telephoto EF lenses. The focus preset feature uses one switch, one button, and one ring. It is used for presetting a given focus distance into memory, so that the photographer can quickly recall the focus distance, without the need for autofocus. The switch has three settings "off"( o ), "on"( | ), or "on with sound"( ((- ), and is used for turning on the feature, and deciding if sound is desired. The "set" button is used for saving the focus distance into memory. The focus preset ring is used for recalling the memory save point. It is a thin knurled ring, usually located in front of the Focusing ring. To use this feature, one must set the switch to either "on" or "on with sound", focus the lens to the desired distance, then press the "set" button. After this, when the feature is turned on, the photographer can turn the focus preset ring, and the lens will recall and focus quickly to the distance that was saved. This feature is useful for sports and birding photography (for instance, to allow rapid focusing on the goal or on a spot where the birds may perch).
Rear gel filter holder on an EF lens
Filter mounting: This mount is used for attaching filters to EF lenses. There are three types: front threaded mount, inner drop-in mount, and rear gelatin holders. Front threaded filters are used on most lenses, and are attached by threading and tightening the filter. Inner, drop-in filter mounts are used on super telephoto EF lenses. They are attached by first pressing the two buttons on the filter mount, and pulling it out. Then either a round threaded filter is attached, or one can use a gelatin filter. Rear gelatin filter holders are used by cutting out a sheet of gelatin, to the size shown on the back of the lens and then sliding it into the holder. Filter mounts are useful for all types of photography, and every EF lens has either one or two of the three types used.
Lens hood mount: This feature is found on most EF lenses. This mount is used for attaching the lens hood. The hood mount is of a bayonet style on most EF lenses, though a clip-on style hood mount is used for a small selection of current lenses.
Tripod collar: This feature is found on most longer focal length lenses, and macro lenses. The tripod collar is used for attaching the tripod ring. There are two main styles of tripod rings. One type is opened up, placed on the lens' tripod collar, then closed and tightened. The other type does not open, but instead is slid up the lens from the mount end (which can only be done when the lens is not mounted on a camera body) and tightened. To set the tripod ring so that it is level with the lens, rotate the ring until the index mark on the tripod ring matches the index mark on the distance scale. The tripod ring is used for attaching a tripod/monopod near to the point of balance of the lens-body combination, more conveniently than the camera body. In the case of larger and heavier lenses, there is also less strain on the lens mount if the body is supported by the tripod-mounted lens than if the lens were to be supported by a tripod-mounted body.
Related technologies
Ultrasonic motor drive
Ultrasonic logo
Ultrasonic motor (USM) lenses appeared with the introduction of the EF 300mm f/2.8L USM lens in 1987. Canon was the first camera maker to successfully commercialise the USM technology. EF lenses equipped with USM drives have fast, silent and precise autofocus operations, and consume less power compared to other AF drive motors.
There are three types of USMs: ring-type USM, micromotor USM, and Nano USM. Ring-type USM allows for full-time manual focus (FT-M) operations without switching out of AF mode. Micromotor USM is used to bring down the cost of the lens. It is possible to implement FT-M even with micromotor USM; however, it requires additional mechanical components, and the vast majority of micro-USM lenses do not offer such capability. Nano USM was introduced in 2016 with the release of Canon's latest iteration of the EF-S 18–135mm lens. It is intended to offer the AF speed of ring-type USM with the quietness of STM mechanisms (see below).
Some older USM lenses are identified with a gold ring and the word "Ultrasonic" printed in gold on the lens barrel. L lenses with USM don't have the gold ring, but they still have the word "Ultrasonic" printed on the lens barrel.
Canon stated that this technology allows smooth and silent autofocus, and with compatible bodies (the first of which is the 650D) will provide continuous autofocus in live view and video.[12] Unlike USM, STM lenses use focus-by-wire to enable full-time manual mode. Two main disadvantages are linked to focus-by-wire: First, the need to computationally process the input before the intended action is executed leads to a sometimes perceptible lag. Second, using the motor requires power, so when an STM lens is not connected to a camera or the camera is switched off, changing the focus is impossible.
All stepping-motor lenses are marked with the letters "STM" on the front of the lens as part of the model designation.
The image stabilization (IS) technology detects handheld motion and optically corrects it. It only corrects handheld motion; if the subject of the photograph is moving, IS will not stop it. It also can only stabilize so much motion, ranging from two to five stops, depending on the specific IS in the lens. Canon has released several versions of the IS system, including the following:
The first version, first used in the 75-300mm lens (1995), takes approximately one second to stabilize, provides approximately two stops of stability, is not suitable for use on a tripod, or for panning.
The 300mm f/4L IS USM lens, released in 1997, adds IS Mode 2, which detects whether panning is taking place horizontally or vertically, and only compensates for vibration in the plane perpendicular to the plane of panning.
In 1999, with the release of the IS super-telephoto lenses (300mm f/2.8L through 600mm f/4L), tripod detection was added, so that the lens could be used on a tripod with IS turned on.
In 2001, a new version of the Image Stabilizer was created for the 70–200mm f/2.8L. This version takes approximately 0.5s and can be stabilized up to three stops.
In 2006, the 70–200mm f/4L IS USM was released with an Image Stabilizer which allows up to four stops of stabilization.[13]
In 2008, the 200mm f/2L IS USM was released with a new version of IS which allows up to five stops of stabilization.[14]
In 2011, with the release of the 300mm f/2.8L IS II and 400mm f/2.8L IS II, IS Mode 3 was added. This mode is similar to Mode 2, except that stabilization is applied only when the shutter is released.
Some newer lenses include an Image Stabilizer which can automatically detect whether the user is panning and respond accordingly, and therefore these lenses do not have an IS mode switch.
All EF lenses that support IS have the words "Image Stabilizer" written on the lens. On some of Canon's larger telephoto lenses, the words "Image Stabilizer" are etched onto a metal plate affixed to the lens.
Diffractive optics
The green-ringed EF 70–300mm f/4.5–5.6 DO IS USM
Diffractive optics (DO) are special lens elements that are used in some lenses. DO lenses are usually smaller and lighter and are better at handling chromatic aberration, compared to conventional lenses of similar focal length and aperture value. They are more expensive to make. Only the EF 400mm f/4 DO IS USM, its updated Mark II version, and the EF 70–300mm f/4.5–5.6 DO IS USM contain DO elements. DO lenses have a green ring on the barrel.
Top range Canon EF lenses are designated "L-series", or "Luxury" lenses.[17] L series lenses are compatible with the full range of EF or EF-S mounts and, as they are aimed at the high-end user, most also include environmental or weather sealing and a constant maximum aperture. All L lenses are supplied complete with a hood and a pouch or case, which are not generally included with non-L lenses. Distinctive visual cues include a red ring around the lens and an off-white colour on longer-focal-length models. The latter also helps to reflect light and reduce heat absorption and subsequent internal expansion of lens components that can affect the image quality of long focal length lenses.[18]
All L lenses include at least one fluorite, ultra-low-dispersion glass element, super ultra-low-dispersion glass element, and/or certain types of aspherical elements. (Note that a number of non-L lenses also use aspherical elements, and at least one non-L lens has a Super UD element.) Most L lenses feature an ultrasonic motor (USM) for focusing.
Timeline of innovations
In 1987 Canon was the first to use USM (Ultra Sonic Motor) with the Canon EF 300mm f/2.8L USM.[19]
In 1989 Canon was the first to create a full frame f/1.0 AF (AutoFocus) lens and the only one until today with the Canon EF 50mm f/1.0L USM.
In 1993 Canon was the first to create an interchangeable 10× superzoom lens for SLR cameras. That lens was Canon EF 35-350mm f/3.5-5.6L USM.
In 1993 Canon created the first Super UD (Ultra low Dispersion) lens with the Canon EF 400mm f/5.6L USM.
In 1995 Canon created the first lens with IS (Image Stabilization). That lens was the Canon EF 75-300mm f/4-5.6 IS USM.
Canon in 2001 was the first to create a lens with DO (multi layered Diffractive Optical element) element. That lens was the Canon EF 400mm f/4 DO IS USM.
Canon in 2008 created the first lens with SWC technology (Subwavelength Structure Coating). That lens was the Canon EF 24mm f/1.4L II USM.
Canon in 2009 created the first lens with Hybrid IS (Image Stabilization) which compensates both angle camera shake and shift camera shake with the Canon EF 100mm f/2.8L Macro IS USM.
Canon in 2010 was the first to create a lens with Fluoride coating. That lens was the Canon EF 70-300mm f/4-5.6L IS USM.
Canon in 2011 made the first fisheye zoom lens, both circular and rectangular. That lens was the Canon EF 8-15mm f/4L Fisheye USM.
Canon in 2012 made the first wide angle lens with Image Stabilization. That lens was the Canon EF 24mm f/2.8 IS USM.
Canon in 2013 created the first telephoto with built-in 1.4× extender. That lens was Canon EF 200-400mm f/4L IS USM Extender 1.4x.[19]
Communication protocol
The communication protocol between the camera and the lens is 8-data-bit, 1-stop-bit SPI (mode 3). The pins, from right to left on the lens, are:
Short to COM1 for 'Life Size Converter' and 1.4× teleconverter
EXT1
Short to COM1 for 2× and 1.4× teleconverter
The information from the lens is used by the camera body for focusing and metering, and with digital camera bodies it is used to record the lens parameters in the Exif data in the images.
All L series primes 135mm or longer, the 400mm DO, the 70–200mm zooms, the 100–400mm zooms, the 200–400mm zoom and the 50mm Compact Macro have three additional communication pins. These additional pins are used by the Canon Extender EF adapters and the Life-Size Converter EF to indicate to the lens the change in focal length so that it is able to report the correct focal length and aperture to the camera body when mounted on a teleconverter. The lens also reduces autofocus speed when a teleconverter is attached to improve autofocus accuracy.
List of Canon EF lenses
The "I", "II", "III" Roman numeral suffix after the focal length(s) indicates the generation number. While I is used in the table below, it is not used in official Canon model numbers; the original model lacks a Roman numeral and only the second and subsequent generations have them. Roman numerals are used only when the entire model designation—focal length(s), aperture, IS, DO, L status, and motor mechanism—is identical from one version to the next. This means, for example, that when Canon introduced IS to lenses whose prior versions lacked that feature (24mm, 28mm, 35mm IS primes in 2012, 16–35mm IS zoom in 2014), the first IS versions lacked Roman numerals.
The EF lenses are grouped below by their focal lengths:
↑ 0.5× magnification only. When paired with the "Life-Size Converter EF", a separate accessory, the lens provides up to 1.0× magnification but at the loss of infinity focus.
Exceptions
Canon has two further types of lenses compatible with the EF mount: Tilt-shift and the 1-5x Macro lens, which are not designated EF, but TS-E and MP-E respectively. TS stands for Tilt-shift while MP stands for macro-photo. These types of lenses are not designated EF as they are manual-focus only lenses. They do, however, retain electronic aperture control as well as focus confirmation.
The Canon EF-S lens mount is a derivative of the EF lens mount created for some Canon digital single-lens reflex cameras with APS-C sized image sensors. It was released in 2003. Cameras with the EF-S mount are backward compatible with the EF lenses and, as such, have a flange focal distance of 44.0 mm. Such cameras, however, have more clearance, allowing lens elements to be closer to the sensor than in the EF mount. Only Canon cameras released after 2003 with APS-C sized sensors support the EF-S mount.
The Canon FD lens mount is a physical standard for connecting a photographic lens to a 35mm single-lens reflex camera body. The standard was developed by Canon of Japan and was introduced in March 1971 with the Canon F-1 camera. It served as the Canon SLR interchangeable lens mounting system until the 1987 introduction of the Canon EOS series cameras, which use the newer EF lens mount. The FD mount lingered through the release of the 1990 Canon T60, the last camera introduced in the FD system, and the end of the Canon New F-1 product cycle in 1992.
The EF 70–200mm lenses are a group of telephoto zoom full-frame lenses made by Canon. The lenses have an EF mount to work with the EOS line of cameras.
The Canon EF 24–70mm lens is a family of professional EF mount wide-to-normal zoom lenses manufactured and sold by Canon. The first of the family, the EF 24–70mm f/2.8L, was introduced in 2002 to replace the well-regarded 28–70mm f/2.8L. Two later versions were announced in 2012. The first of these, the EF 24–70mm f/2.8L II, was announced by Canon in February, but would not ship to customers until September of that year. This lens replaced the Mk I, and had an MSRP of US$2299 when introduced. The latest member of the family is the EF 24–70mm f/4L IS USM, which became available in January 2013. The f/4 version, which is the first of the family to include image stabilization, was initially reported to be the standard kit lens for the Canon EOS 6D, but did not appear in 6D kits in most markets until late 2014, and 5D Mark IV kit in 2016.
The EF 17–40mm f/4L USM lens is a wide-angle lens made by Canon Inc. The lens has an EF mount to work with the EOS line of cameras. Other than the front element, it is sealed against dust and water, and features a diaphragm which remains nearly circular from f/4 to f/8. It is one of the few Canon photo lenses that are parfocal.
The Canon EF 35mm lenses are a family of wide angle prime lenses with EF mount made by Canon Inc. The family also includes one EF-S lens that only mounts on Canon bodies with APS-C sensors.
The Canon EF 28–70mm f/2.8L USM is an EF mount wide-to-normal zoom lens made by Canon from 1993 to 2002. It was replaced by the 24–70mm f/2.8L USM.
Canon's series of L lenses are a professional line of photography lenses made by Canon. Canon has sold zoom and prime L-series lenses for the discontinued FD lens mount, for the current EF lens mount used on all Canon EOS SLR cameras and for the RF mount used on mirrorless interchangeable-lens cameras.
The EF 24–105mm f/4L IS USM is an EF mount wide-to-telephoto zoom lens. It was introduced by Canon in 2005 to complement the well-regarded 17–40mm f/4L USM and 70–200mm f/4L USM.
The EF 100–400 mm f/4.5–5.6L IS USM is a professional EF mount telephoto zoom lens manufactured by Canon Inc. The first version of this lens was announced in September 1998, and an updated version was announced in November 2014. It is a high performance telephoto lens most often used for sports and wildlife photography.
The Canon EF 100 mm lenses are used for Canon DSLR cameras. There are four different types of EF 100 mm lens for Canon. Certain lenses are best for macro photos, whereas other lenses are good for taking pictures of subjects from a distance.
The EF 500mm lenses are a group of super-telephoto prime lenses made by Canon that share the same focal length.
The Canon EF 400mm are seven super-telephoto lenses made by Canon. These lenses have an EF mount that work with the EOS line of cameras. These lenses are widely used by sports and wildlife photographers.
The EF 200mm USM lens is an L-series prime telephoto lens made by Canon Inc. for the EOS line of cameras. Four 200 mm primes were made: f/1.8, two f/2.8, and the most recent f/2.0.
The EF 300mm lens refers to a family of telephoto prime lenses made by Canon, five of which have been sold to the general public and one of which was only made on special order. The lenses have an EF type mount which fits the Canon EOS line of cameras.
Canon Inc. has produced seven different 24mm lenses for its Canon EF and EF-S lens mounts. Three have been discontinued after updated replacements were announced.
The EF 70–300mm lenses are a series of telephoto zoom lenses made by Canon Inc. They have a Canon EF lens mount to work with the EOS line of cameras.
The Canon EF 800mm f/5.6L IS USM lens is a super-telephoto lens by Canon Inc., released at a manufacturer's suggested retail price of US$11,999.00 and now selling at an MSRP of $12,999.00.
The EF 200–400 mm f/4L IS USM Extender 1.4× is an EF mount super telephoto zoom lens produced by Canon. It is part of the professional L-series and functions with the Canon EOS line of cameras. The EF 200–400 mm lens features an ultrasonic motor, image stabilization and weather sealing. It is the first and only EF lens with a built-in extender.
The Canon RF lens mount is an interchangeable-lens mount developed by Canon for its full-frame mirrorless interchangeable-lens cameras, and featured first by the EOS R, followed by the EOS RP. The RF mount was announced in September 2018. In May 2022, Canon announced APS-C EOS R cameras and RF-S lenses designed for these cameras.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
