Stadler Eurolight | |||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
Sources: [3] [4] [5] ‡ UKLight. [6]
|
The Stadler Eurolight (known as the Vossloh Eurolight until 2015) is the brand name for a family of 4-axle Bo'Bo' mainline diesel-electric locomotives with sub-20-tonne axleloads for passenger and freight trains produced by Stadler Rail.
The Eurolight series was announced by Vossloh during 2009, the first examples were completed and commenced testing in the following year. The type has been intentionally developed to support use on secondary lines without limiting power or speed performances, making it suitable for mixed traffic operations. Specific versions of the Eurolight have been developed for the United Kingdom market, and a 6-axle Co'Co' machine for narrow gauge Asian markets, named UKLight and AsiaLight respectively. Furthermore, an electro-diesel locomotive derivative of the UKLight that shares much of its design, referred to as the Stadler Euro Dual, has also been developed and introduced during the late 2010s.
In 2009, Vossloh announced its intention to expand its diesel locomotive range to include further shunting/light mainline locomotives with either hydraulic or electric transmissions, and to produce a mainline diesel-electric locomotive (EURO Light) for markets where an axleload below 20 t is required. [7] The four-axle EuroLight was designed to have a low axle load for use on cross-border operations on non-electrified European secondary routes, enabling operators to bypass bottlenecks on main corridors. [8] It is reportedly suited for mixed-traffic operations, and can be outfitted to haul both passenger services and freight consists alike. [9]
The locomotive used numerous components from the 20–22 t axleload Vossloh Euro locomotive series. Differences include the adoption of a C175 engine from Caterpillar Inc. (12- or 16-cylinder of 2.3 or 2.8 MW) and traction equipment supplied by ABB Group. [9] In comparison to the Vossloh Euro, a noticeable reduction in mass was achieved, which has been attributed to the adoption of a lighter engine/alternator set, as well as using lighter weight auxiliary system components. [9] The bogie is the design used in the RENFE Class 334 locomotive, [4] with coil spring primary and secondary suspension. [3] Wherever feasible, elements of the engine and traction system are composed of lighter aluminium rather than steel. [9]
For greater efficiency, the CAT engine has been furnished with electronically regulated fuel injectors, enabling it to be precisely tuned to match the demands being placed on the engine at that time; factors taken into account include load, speed, engine temperature, ambient air temperature, and fuel temperature. For further fuel savings, automated stop-start technology has been incorporated to shut the engine down at times of inactivity and restart when required or to keep coolant temperatures above a set threshold; this behaviour can be manually overridden by the driver if desired. [9] It is also equipped with turbochargers and after-cooling apparatus. The engine incorporates its own telemetry equipment, separate from the general system used by the locomotive; these systems aid in performance analysis and fault reporting. [9] It is reportedly to be serviceable at trackside locations and requires a major service to be performed at intervals of 18,000 operating hours, reducing the need for the locomotive to return to the operator's depots. [9]
The CAT engine conform to European Stage IIIA emission standards, and can be modified to meet 2012 IIIB emission standards by replacing the exhaust silencer with a diesel particulate filter. [3] [4] Implementing such equipment in some regions can be complicated by the need to adhere to restrictive loading gauges, such as that predominantly used in the United Kingdom; accordingly extensive redesigning may be required. [9] Both the engine and traction apparatus are frame mounted to reduce unsprung mass, being typically fitted using a five-point flexible mounting system, the mounting points of which being intentionally isolated. [9]
The ABB traction system uses a six-pole brushless WGX560 synchronous alternator, which is directly coupled to the CAT engine. [10] The alternator supplies two traction packages (ABB Bordline CC1500 DE Compact Converters) [11] each with rectifier to create an intermediate DC supply, braking chopper, and drive electronics (AC800 PEC) with adhesion (anti slip) control controlling two traction inverters and one auxiliary inverter per package. There is one traction inverter per traction motor. The traction motors are rated at 600 kW (800 hp) at 4,400 rpm. [5] The drive electronics incorporate features such as fault condition detection and anti-slip control to maximise wheel adhesion to the rails, the latter being augmented by an automated sanding system. Head end power (for passenger versions) is taken from the intermediate DC link; the DC power system which is also used for dynamic braking. [11] [9] The braking systems typically used are a combination of rheostatic and disc brakes. [9]
The first EuroLight was unveiled at the InnoTrans trade fair in Berlin in 2010. [12] From the onset, the design was designed to be customisable to customer requirements, allowing for a variants with a higher top speed, increased fuel capacity, or compatibility with limited loading gauges to be produced. [9] Modified versions for broad and narrow gauge railways, and a long distance 7,000-litre (1,500 imp gal; 1,800 US gal) fuel capacity version are also said to be buildable. [4] An electro-diesel locomotive derivative, referred to as the Stadler Euro Dual, has also been developed; it shares most of its design, such as the bodyshell, braking systems, bogies, traction equipment and software, with vehicles of the Stadler Eurolight series. [13] [9]
During early 2010, a pair of prototypes were constructed, numbered 248.001 and 248.002. That same year, 248.002 was publicly exhibited at Innotrans. [14] Homologation tests with 248.001 in Germany began in January 2011. [14] Performance data gathered from these prototypes was subsequently made available to prospective operators to aid in evaluating the EuroLight's capabilities. [15]
During July 2015, the Italian operator Dinazzano Po ordered a single unit; [16] the locomotive performed its maiden freight service during April 2018. [17] On 31 July 2019, it was announced that the Spanish railway infrastructure company ADIF had ordered 22 Eurolight locomotives for rescue purposes; [18] these vehicles are compliance with the European Stage IIIB emissions standards and feature a facelift over earlier production examples. [19]
On 5 January 2012, Direct Rail Services announced an order for fifteen 160 km/h (100 mph) EuroLight UK locos for intermodal and passenger work with a 2.8 MW (3,800 hp) C175-16 engine to be delivered in 2013, with options for more. Vossloh's product name for the design is UKLIGHT. [20] They were designed to fit the small loading gauge in the UK, and were manufactured at Vossloh España's plant in Valencia, Spain, with an expected delivery date of late 2013. [12] [21] They are known in the United Kingdom as the class 68. [22] The value of the contract has been estimated at £45 million. [23]
During early 2013, the design and livery of the Direct Rail Services' class 68s was publicly unveiled. [24] [25] By May 2013, the first of the locomotives was under construction, at which point testing at Velim test track and delivery to UK for certification was anticipated to occur around September/October 2013; [26] By December 2013, number 68001 had commenced tests at Velim, [27] and 68002 had been completed at Albuixech. [28]
During January 2014, the first locomotive, designated as 68002 Intrepid, was shipped to Southampton and transported to Carlisle; trials commenced one month later, which were initially conducted between Carlisle and Crewe. [29] In September 2014, an option for ten further UKLights was confirmed to have been taken up by DRS/BeaconRail. [30] Seven more units were confirmed as ordered in July 2015. [16]
A narrow gauge, 1,000 mm (3 ft 3+3⁄8 in) to 1,067 mm (3 ft 6 in), six axle Co'Co' design has also been developed. In a typical configuration, this locomotive weighs around 96 tons and has an engine power output of 1,800 to 2,800 kW (2,400 to 3,800 hp) at 1,800 rpm, depending on engine installed (either 12- or 16-cylinder engines, either CAT, Cummins or MTU designs). The top speed is 120 km/h (75 mph) and starting tractive effort 320 kN (72,000 lbf). [20] [31]
During October 2019, the Taiwan Railway Administration awarded a €165M order to supply 34 AsiaLight locomotives; the deal was Stadler's first major tender win in the Asia Pacific region. [32]
An electro-diesel locomotive is a type of locomotive that can be powered either from an electricity supply or by using the onboard diesel engine. For the most part, these locomotives are built to serve regional, niche markets with a very specific purpose.
Vossloh AG is a rail technology company based in Werdohl in the state of North Rhine-Westphalia, Germany. The SDAX-listed group has achieved sales of around €930 million in 2016 and, as of 2017, had more than 4,000 employees.
Alstom Traxx is a modular product platform of mainline diesel-electric and electric locomotives. It was produced originally by Bombardier Transportation and later Alstom, and was built in both freight and passenger variants. The first version was a dual-voltage AC locomotive built for German railways from the year 2000. Later types included DC versions, as well as quadruple-voltage machines, able to operate on most European electrification schemes: 1.5/3.0 kV DC and 15/25 kV AC. The family was expanded in 2006 to include diesel-powered versions. Elements common to all variants include steel bodyshells, two bogies with two powered axles each, three-phase asynchronous induction motors, cooling exhausts on the roof edges, and wheel disc brakes.
Stadler Rail AG is a Swiss manufacturer of railway rolling stock, with an original emphasis on regional train multiple units and trams, but moving also into underground, high speed, intercity and sleeper trains. It also produces niche products, such as being one of the last European manufacturers of rack railway rolling stock. Stadler Rail is headquartered at its place of origin in Bussnang, Switzerland. Stadler Rail employed 13,900 employees by 2023.
The SNCF Class BB 60000 are a class of 4 axle heavy shunting and light freight diesel–electric locomotives built at the Vossloh España works in Valencia. Since the class is primarily used as a freight locomotive the class is commonly referred to as SNCF BB 460000.
The British Rail Class 88 is a type of mainline mixed traffic electro-diesel locomotive manufactured by Vossloh España/Stadler Rail Valencia for Direct Rail Services (DRS) in the United Kingdom. The locomotive is part of the Stadler Euro Dual family. It is the first dual-mode locomotive in the UK to use the 25 kV AC electrification.
The Voith Maxima locomotives are a family of diesel-hydraulic locomotives built by Voith Turbo Lokomotivtechnik GmbH & Co. KG., a subsidiary of Voith.
The Stadler Euro is a class of diesel-electric locomotives built by Stadler Rail for the European market. It is available in two basic variants, the four-axle Euro 3000, and the six-axle Euro 4000. These locomotives are powered by EMD 710 prime movers. A six-axle electric-only variant is marketed as Euro 6000; it is also built for the Iberian gauge.
The Prima Diesel-electric locomotives are a class of medium and heavy, four- and six-axle, passenger and freight mainline locomotives. They have been built both to 1,435 mm standard and 1,668 mm broad gauges, and find use in the Middle East, Europe and North America. Alstom is the primary designer in cooperation with both General Motors and Siemens.
The Eurorunner family of locomotives are a series of medium- to high-power diesel–electric locomotives built by Siemens for the European market. Introduced from 2002 onwards, they share design characteristics with the successful Eurosprinter range of electric locomotives, also built by Siemens.
Stadler Rail Valencia SAU is a Spanish company, mainly producing products for the railway industry, subsidiary of Stadler Rail.
Alpha Trains is a rolling stock leasing company operating in the European Union and European Free Trade Association (EFTA) regions of mainland Europe.
The Vossloh G1000 BB is a class of off-centre cab diesel-hydraulic B'B' 4 axle locomotives built by Vossloh in Kiel since 2002. When operating under Swiss ownership the locomotives have received the class Am 842, several units owned by the Société Nationale des Chemins de Fer Luxembourgeois are classified as CFL class 1100.
The GE PowerHaul is a class of mainline diesel-electric locomotives designed by General Electric. Thirty locomotives were ordered by Freightliner in 2007; the first locomotive was completed in July 2009 at GE's Erie, Pennsylvania, plant.
The JT 42BW is a class of four axle Bo'Bo' diesel electric locomotives manufactured by Alstom's Meinfesa plant in Spain for Israel Railways (IR). The locomotives were the primary passenger locomotive unit used by IR through the 2000s.
The JT 42CW is a class of six axle Co'Co' diesel electric freight locomotives manufactured by Alstom's Meinfesa plant in Valencia Spain in the late 1990s for use by Israel Railways (IR).
The Class 68 is a type of mainline mixed traffic diesel-electric locomotive manufactured by Stadler Rail Valencia for Direct Rail Services (DRS) in the United Kingdom. The design is derived from the Stadler Eurolight, and Stadler's product name for this variant is the UKLight.
The Stadler EuroDual is a series of dual power, electro-diesel locomotive by Stadler Rail Valencia. Unlike traditional dual mode locomotives, fitted with relatively low-powered diesel engines for 'last mile' movements only, vehicles are typically furnished with power units more comparable to that of mainline diesel locomotives.
Beacon Rail is a rolling stock company (ROSCO) based in the United Kingdom. Its primary business is the leasing of locomotives and rolling stock to various train operating companies (TOCs).
The Passenger Rail Agency of South Africa Class Afro 4000 of 2014 is a South African diesel-electric locomotive.
.. EuroLight is intended to meet the potential requirements of cross-border freight and passenger operators. According to the manufacturer, EuroLight will be 'light enough to operate on branch lines but powerful enough to keep up with main line traffic'. Vossloh sees an important market niche for a high-performance four-axle diesel loco for use on routes with UIC Class C or Class D track, which have an axleload limit of less than 20 tonnes