Nomad | |
---|---|
![]() | |
Role | Glider |
National origin | United States |
Designer | Robert M. Stanley |
First flight | 1938 |
Introduction | 1938 |
Status | sole example in the National Air and Space Museum |
Number built | 1 |
The Stanley Nomad is an American mid-wing, V-tailed, single seat glider that was designed and constructed by Robert M. Stanley in 1938. [1] [2]
Stanley designed the Nomad between 1935 and 1938, while serving in the US Navy, building it in the basement of a house that he shared with other sailors in San Diego, California. The aircraft was completed in June 1938. [1] [2]
The Nomad is of mixed construction, with a monocoque aluminium fuselage, a wooden cantilever wing with one spar and wooden tail surfaces. The wing and tail are all covered with doped aircraft fabric covering. The wing employs a NACA 23-018 airfoil at the wing root, transitioning to a NACA 23-012 at the wing tip. The original design had a conventional cruciform tail, but in 1939 this was replaced with one of the first V-tails used on any aircraft and the first employed on a sailplane. The landing gear is a monowheel. [1] [2]
Stanley had never flown any glider when he entered the Nomad in the 1938 US Nationals, held in Elmira, New York. The Nomad's first flight was in the competition and Stanley completed all three parts of his silver badge on that first flight. On one contest flight he flew almost to New Jersey, which amazed the spectators and other competitors alike. After one out-landing a souvenir hunter stole his removable elevators, putting him out of the remainder of the competition. [1] [2]
Stanley brought the Nomad to the 1939 US Nationals and by then the conventional tail had been replaced with a V-tail. At that event he completed the first gold badge in the United States and on 3 July 1939 set a new US altitude record of 16,400 ft (4,999 m), which was more than twice the previous record. On the following day, 4 July 1939, he broke the altitude record again, climbing to 17,284 ft (5,268 m) climbing inside a cumulonimbus cloud. He finished second in the Nationals, even though he did not complete the last task. [1] [2]
Later while flying aerobatics in the Nomad after a poorly completed wing repair the wing failed in flight and Stanley bailed out successfully. The aircraft's remains were sold, the new owner repaired the aircraft and Stanley bought it back from him. [1] [2]
Stanley went on to become president of the Soaring Society of America in 1940, but never designed another glider. He worked as the chief test pilot for Bell Aircraft Corporation during the Second World War and in that capacity made the first flight in the Bell XP-59, the first jet-powered aircraft produced in the USA. [2]
Stanley's wife, Katherine N. Stanley, donated the aircraft to the National Air and Space Museum in 1978 after Stanley's death in 1977. For a time in the 1980s it was on loan to the National Soaring Museum, but in 2011 was on display and suspended from the ceiling of the Boeing Aviation Hangar at the Steven F. Udvar-Hazy Center. [1] [2] [3]
Data from Soaring [1]
General characteristics
Performance
Related lists
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The Bowlus BS-100 Super Albatross is a single seat, mid-wing glider that was designed by Hawley Bowlus in 1938.
The Hall Ibex is an experimental, American, gull winged, single seat glider that was designed by Stan Hall and first flown in 1968.
The Schreder Airmate HP-10 is an American, high wing, single seat, FAI Standard Class glider that was designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.
The Bennett-Carter CBS-1 Dottie S is an American high-wing, strut-braced single-seat glider that was designed by George Bennett and Richard Carter and first flown in 1958.
The Explorer PG-1 Aqua Glider is an American single seat, biplane glider that was designed by Bill Skiliar in 1959 and made available as plans for amateur construction. The prototype was built with help from a troop of Air Explorer Scouts that same year.
The Hutchinson HS-127 is an American mid-wing glider that was designed and built by Vernon Hutchinson.
The Oldershaw O-2, officially registered as the Oldershaw Jana-Linn O-2, is an American high-wing, single seat, V-tailed glider that was designed and built by Vernon Oldershaw.
The Martin M-1 was an American gull winged, single-seat glider that was designed and built by Volmer Jensen in 1939.
The Moore SS-1 is an American high-wing, single seat, FAI Standard Class glider that was designed and constructed by Arien C. Moore of Sweet Home, Oregon.
The Prue 160 was an American mid-wing, V-tailed, single-seat glider that was designed and built by Irving Prue in 1945.
The Prue 215 is an American high-wing, V-tailed, single-seat glider that was designed by Irving Prue in 1949.
The Prue IIA is an American, high-wing, two-seat, T-tailed glider that was designed by Irving Prue and constructed by Ed Minghelle of Palmdale, California.
The Prue Super Standard is an American, high-wing, single-seat, FAI Standard Class glider that was designed by Irving Prue in 1962 as a development of the Prue Standard.
The Midwest MU-1 was an American single-seat, high-wing, strut-braced utility glider that was designed by Arthur B. Schultz in the 1930s.
The Steinruck SCS-1 is an American high-wing, single-seat, V-tailed glider that was designed by A.C. Cordas and constructed by Wade Steinruck.
The Trager-Bierens T-3 Alibi is an American high-wing, V-tailed, single seat glider that was designed and constructed by Kempes Trager and John Bierens.
The Peterson MAP-3 Medena is an American shoulder-wing, single-seat, FAI Open Class glider that was designed and constructed by Max A. Peterson, first flying in 1966.