Stothert & Pitt was a British engineering company founded in 1855 in Bath, England. It was the builder of various engineering products ranging from Dock cranes to construction plant and household cast iron items. It went out of business in 1989. The name and intellectual property became part of Clarke Chapman.
George Stothert (n.b. early on the name is sometimes rendered as Stoddard or Stodhert) moved to Bath in 1785 [1] having taken over Thomas Harris's ironmonger's business. He was an agent for Abraham Darby I's Coalbrookdale Iron Company, selling all types of domestic ironmongery. By 1815 they set up their own foundry as Abraham Darby had opened his own warehouse in Bristol. The company was now managed by his son, also George. In 1851 they exhibited a hand crane at the Great Exhibition.
In 1837, Henry Stothert, brother of the younger George, set up an ironworks in Bristol, first as Henry Stothert & Co., then, joined by Edward Slaughter, Stothert, Slaughter & Co. Slaughter had earlier formed Slaughter & Co. at his Avonside Ironworks, later and better known as Avonside . This works produced some substantial iron engineering including a swivel bridge over the river Frome, several of the first engines for Brunel's Great Western Railway and the Bristol and Exeter Railway, as well as 14 engines for the Brighton and South Coast Railway. Stothert, Slaughter & Co. started building ships in 1844; this part of the business moved to Hotwells in 1852 under the management of Henry's nephew George Kelson Stothert (son of his brother John) and became G.K. Stothert & Co.
Robert Pitt became an apprentice with Stothert in Bath in 1834 to 1840. In 1840-41 he was working as a draughtsman for Stothert, Slaughter & Co. in Bristol but was back in Bath from 1841 to 1842 helping with the establishment of Stothert's Newark Street Foundry. In 1844 Pitt became a partner with Stotherts along with a second partner Rayno, sometimes referred to as Stothert, Rayno & Pitt, the firm was usually, simply, called Stotherts. In 1855 it became Stothert and Pitt, in 1883 a limited company and in 1902 the firm became a limited company [1]
In the period from the 1840s to 1900 the Bath company expanded rapidly. Moving from earlier premises on the north side of the river Avon, to the Newark Street Works on the south-side, then, developing the Victoria Works in the 1890s which filled the valley between the river and the Lower Bristol Road. Some early work by Stothert can still be seen on the Kennett & Avon Canal in Bath, where two very elegant iron bridges span the canal with the Stothert name on them. However, it was in the 1840s that the firm began to develop the cranes which eventually were to make them a world name in crane building.
The earliest surviving crane which was probably made by Stothert can be found at Carmarthen and dates from about 1850, but it bears no name plate. The oldest crane bearing the Stothert & Pitt name was used in Box quarries and probably dates from the 1860s, it was designed to lift 6 tons and sat in a garden in Box until it was fully restored and returned to the regenerated Newark Works being officially unveiled at the site in June 2023. The company began to make its name in the world of large scale crane manufacture when in 1869 they made a Titan crane for setting 27-ton blocks during construction of the Manora Point breakwater, Karachi ('Kurrachee'). Tested with 40-ton load in Bath, September 1869 [9].
They then built a 35 ton Fairbairn steam crane for Bristol docks in 1876, to an improved design by William Fairbairn. The boiler maker's plate reads "Marshall Sons & Co. Ltd., Engineers, Gainsboro, England, No.92766". In 1876 they supplied a blocksetting crane to Colombo Harbour Works, Ceylon for breakwater works. Stothert and Pitt; 17/30-ton non rotative, sidesetter.
Building rail cranes for export to the colonies.
Stothert and Pitt supplied their earliest electric powered crane to Southampton Dock Authority in 1892. Electric power provided several advantages: powerful motors could be placed in each crane and powered centrally, without requiring a separate prime mover (i.e. steam engine and boiler) in each crane. The crane mechanisms were also lighter, allowing them to be placed on raised carriages that could then straddle a railway freight line- the portal crane. Rather than requiring a bare strip of unused quayside between the railway line and the harbour wall to leave space for cranes, the railway could now be brought right to the dock edge. Cranes were also available immediately, without waiting for boilers to raise steam. Most importantly though (and an advantage over centrally powered hydraulic cranes), electric cranes were now mobile along the dock edge on their own rail lines. Rather than ships queueing for a single berth space alongside a fixed crane, cranes could be brought to each ship's hold hatches as needed. This made a single crane far more efficient, in terms of cargo handled per day. Soon such mobile electric cranes were near universal.
Five examples of electric cranes provided in 1951 have been preserved by Bristol Museum Service at Princes Wharf.
In 1912, Stothert & Pitt's design team, led by Claude Topliss, developed an improved design of level luffing gear, which greatly improved the speed and efficiency of cargo handling cranes fitted with it. . [2] This used an arrangement of compensating hoist cables to automatically keep the hook, and load, level as the jib was luffed up and down.
As cranes became more common in docks, and as ships became bigger, they also became more specialised. In 1927, Stothert & Pitt produced the first bulk-handling crane. [3] Rather than a simple hook that could handle a range of slung loads, this was a crane designed around the use of an integral grab. Working the grab requires extra cable or cables from the crane jib, so these are a whole specialised design. The first was to unload coal at a power station in London.
Another innovation was the kangaroo crane. Rather than slewing (rotating) the crane to reach the delivery hopper on-shore, a kangaroo crane has its own in-built hopper beneath the jib, that slews with it. Dumping the grab contents into the hopper now only requires the quicker luffing movement, without needing to slew.
In July 1915 the company took over the construction of the Pedrail Machine, an attempt to create an armoured fighting vehicle for use on the Western Front. The machine, designed by Colonel R. E. B. Crompton, a consultant to the Landship Committee, ran on a pair of pedrail tracks in tandem. It was intended to mount an armoured body on the chassis so that a party of troops could be carried across no-man's-land. After the Landship Committee decided against the machine, the War Office transferred construction to S&P, with a view to completing it as a mobile flame-thrower. The finished chassis was handed over to the Trench Warfare Department in August, but no further development took place.
During World War II the company built tanks and miniature submarines for the War Office, as well as armaments.
The Challenger tank was a development of the Cromwell tank chassis, so as to take the more powerful 17 Pounder gun. Stothert & Pitt built this tank and designed various modifications. [4] Lengthening the chassis from five roadwheels to six presented no difficulty for such an engineering firm, but designing armoured fighting vehicles was new to them and their efforts were not wholly successful. The new turret for Challenger carried the gun and its higher recoil well enough, but only by being nearly twice the height of other turrets for this chassis – making the tank a much easier target. The A30 (Avenger) tank destroyer was a similar development of a 17pdr gun on the same lengthened chassis, but had an open-topped turret 2 feet lower than that of Challenger. During the development of Challenger, the prototype turret was first mounted on the even larger TOG 2. [4]
By 1974 Stothert & Pitt had built 30,000 single-drum pedestrian rollers.
The firm was sold to Robert Maxwell's Hollis Group in 1986. Following the collapse of Maxwell's empire a management buy out was undertaken in 1988. This failed and the company closed in 1989, with all works shutting down. Stothert & Pitt was purchased by NEI Ltd (Northern Engineering Industries) in 1989 [5] and became part of the Clarke Chapman Group of Companies. Clarke Chapman was then subsequently sold to Rolls Royce. After several successful years Rolls Royce decided to concentrate on their core products and in 2000 Stothert & Pitt (Clarke Chapman) was sold to Langley Holdings. [6]
Stothert & Pitt moved from Bath to Bristol in summer 2008 to the Bradman Lake offices on Yelverton Road in Brislington, Bristol. Bradman Lake moved again in 2019 to Unity Road, Keynsham taking Stothert & Pitt with them.
Stothert & Pitt still offer spares and aftermarket support for all its dockside and offshore cranes still in operation.
Stothert & Pitt's former 40,000 square feet (3,700 m2) Newark Works, now grade II listed, [7] was converted in 2022 into flexible working space for small businesses as part of the Bath Quays development. [8] Its larger site was developed from 2011 into the Bath Western Riverside residential scheme. [9] TCN UK currently owns Newark Works and provides modern meeting rooms and office spaces to entrepreneurs and businesses in Bath. [10] Newark Works now operates as a "creative hub" for local startups and technology companies. [10]
A crane is a machine used to move materials both vertically and horizontally, utilizing a system of a boom, hoist, wire ropes or chains, and sheaves for lifting and relocating heavy objects within the swing of its boom. The device uses one or more simple machines, such as the lever and pulley, to create mechanical advantage to do its work. Cranes are commonly employed in transportation for the loading and unloading of freight, in construction for the movement of materials, and in manufacturing for the assembling of heavy equipment.
A railway crane is a type of crane used on a railway for one of three primary purposes: freight handling in goods yards, permanent way (PW) maintenance, and accident recovery work. Although the design differs according to the type of work, the basic configuration is similar in all cases: a rotating crane body is mounted on a sturdy chassis fitted with flanged wheels. The body supports the jib and provides all the lifting and operating mechanisms; on larger cranes, an operator's cabin is usually provided. The chassis is fitted with buffing (UK) and/or coupling gear to allow the crane to be moved by a locomotive, although many are also self-propelled to allow limited movement about a work site.
An armoured recovery vehicle (ARV) is typically a powerful tank or armoured personnel carrier (APC) chassis modified for use during combat for military vehicle recovery (towing) or repair of battle-damaged, stuck, and/or inoperable armoured fighting vehicles, such as tanks and armoured personnel carriers. Most ARVs have motorized tracks, like a tank or bulldozer, enabling the ARV to operate on uneven ground. The term "armoured repair and recovery vehicle" (ARRV) is also used.
Rothwell, Hick and Rothwell was an engineering company in Bolton, England. Set up in 1822, the partners became interested in the production of steam locomotives after the Rainhill Trials. The company's first engine was Union, a vertical boiler, 2-2-0 with horizontal cylinders for the Bolton and Leigh Railway of which Hick and Rothwell were promoters and original shareholders, followed by three more locomotives the following year for American railways.
The Avonside Engine Company was a locomotive manufacturer in Avon Street, St Philip's, Bristol, England between 1864 and 1934. However the business originated with an earlier enterprise Henry Stothert and Company.
A steam crane is a crane powered by a steam engine. It may be fixed or mobile and, if mobile, it may run on rail tracks, caterpillar tracks, road wheels, or be mounted on a barge. It usually has a vertical boiler placed at the back so that the weight of the boiler counterbalances the weight of the jib and load.
Titan Clydebank, more commonly known as the Titan Crane is a 150-foot-high (46 m) cantilever crane at Clydebank, West Dunbartonshire, Scotland. It was designed to be used in the lifting of heavy equipment, such as engines and boilers, during the fitting-out of battleships and ocean liners at the John Brown & Company shipyard. It was also the world's first electrically powered cantilever crane, and the largest crane of its type at the time of its completion.
Brunswick Wharf Power Station was a coal- and oil-fired power station on the River Thames at Blackwall in London. The station was planned from 1939 by Poplar Borough Council but construction only started in 1947 after the Second World War. It was decommissioned in 1984, and the site was redeveloped.
Clarke Chapman is a British engineering firm based in Gateshead, which was formerly listed on the London Stock Exchange.
Ruston-Bucyrus Ltd was an engineering company established in 1930 and jointly owned by Ruston & Hornsby based in Lincoln, England, and Bucyrus-Erie based in South Milwaukee, Wisconsin, the latter of which had operational control and into which the excavator manufacturing operation of Ruston & Hornsby was transferred. The Bucyrus company proper, from which the Bucyrus component of the Ruston-Bucyrus name was created, was an American company founded in 1880, in Bucyrus, Ohio.
A Fairbairn crane is a type of crane of an 'improved design', patented in 1850 by Sir William Fairbairn. There are numerous hand-powered versions around the world and one surviving steam-powered example in Bristol Docks, England.
A level-luffing crane is a crane mechanism where the hook remains at the same level while luffing: moving the jib up and down, so as to move the hook inwards and outwards relative to the base.
Thomas Smith & Sons manufactured steam, diesel and electric powered cranes in their Old Foundry on a narrow strip of land between Town Street in Rodley near Leeds and the Leeds and Liverpool Canal.
Joseph Booth & Bros was an English company notable for making cranes used in large construction projects.
Edward Snell (1820–1880) was a diarist, artist, civil engineer and surveyor, responsible for the design of the Geelong – Melbourne Railway for the Geelong and Melbourne Railway Company.
A block-setting crane is a form of crane. They were used for installing the large stone blocks used to build breakwaters, moles and stone piers.
A Hercules crane was a form of block-setting crane, developed in the 1870s. They were characterised by a wheeled, mobile gantry running on rails, surmounted by a slewing horizontal jib, held up by a kingpost.
The Arrol Gantry was a large steel structure built by Sir William Arrol & Co. at the Harland and Wolff shipyard in Belfast, Northern Ireland. It was built to act as overhead cranes for the building of the three Olympic-class liners.
G.K. Stothert & Co was a British engineering company primarily known for shipbuilding and repair founded in 1852 in Bristol, England.
| International | |
|---|---|
| National | |
