Subnivean climate

Last updated

The subnivean climate (From Latin for "under" ( sub-) and "of snow" ( niveus ) and English -an.) [1] is the environment between fallen snow and terrain. This is the environment of many hibernal animals, as it provides insulation and protection from predators. The subnivean climate is formed by three different types of snow metamorphosis: destructive metamorphosis, which begins when snow falls; constructive metamorphosis, the movement of water vapor to the surface of the snowpack; and melt metamorphosis, the melting/sublimation of snow to water vapor and its refreezing in the snowpack. These three types of metamorphosis transform individual snowflakes into ice crystals and create spaces under the snow where small animals can move.

Contents

Subnivean fauna

Subnivean fauna includes small mammals such as mice, voles, shrews, and lemmings that must rely on winter snow cover for survival. These mammals move under the snow for protection from heat loss and some predators. In winter regions that do not have permafrost, the subnivean zone maintains a temperature of close to 32 °F (0 °C) regardless of the temperature above the snow cover, once the snow cover has reached a depth of six inches (15 cm) or more. The sinuous tunnels left by these small mammals can be seen from above when the snow melts to the final inch or so.

Some winter predators, such as foxes and large owls, can hear their prey through the snow and pounce from above. Ermine (stoats) can enter and hunt below the snowpack. Snowmobiles and ATVs can collapse the subnivean space. Skis and snow shoes are less likely to collapse subnivean space if the snowpack is deep enough.

Larger animals also use subnivean space. In the Arctic, ringed seals have closed spaces under the snow and above openings in the ice. In addition to resting and sleeping there, the female seals give birth to their pups on the ice. Female polar bears also den in snow caves to give birth to their young. Both types of dens are protected from exterior temperatures. Formation of these large spaces is from the animals' activity, not ground heat.

Subnivean climate formation

Destructive metamorphosis

Destructive metamorphosis begins as the snow makes its way to the ground, often melting, refreezing, and settling. Water molecules become reordered, causing the snowflakes to become more spherical in appearance. [2] These melting snowflakes fuse with others around them, becoming larger until all are uniform in size. While the snow is on the ground, the melting and joining of snow flakes reduces the height of snowpack by shrinking air spaces, causing the density and mechanical strength of the snowpack to increase. Freshly fallen snow with a density of 0.1 g/cm3 has very good insulating properties; however as time goes on, due to destructive metamorphism, the insulating property of the snowpack decreases, because the air spaces between snowflakes disappear. Snow that has been on the ground for a long period of time has an average density of 0.40 g/cm3 and conducts heat well; however, once a base of 50 cm of snow with a density around 0.3 g/cm3 has accumulated, temperatures under the snow remain relatively constant because the greater depth of snow compensates for its density. Destructive metamorphosis is a function of time, location, and weather. It occurs at a faster rate with higher temperatures, in the presence of water, under larger temperature gradients (e.g., warm days followed by cold nights), at lower elevations, and on slopes that receive large amounts of solar radiation. As time goes on, snow settles, compacting air spaces, a process expedited by the packing force of the wind. [3]

Compaction of snow reduces the penetration of long- and short-wave radiation by reflecting more radiation off the snow. This limitation of light transmission through the snowpack decreases light availability under the snow. Only 3% of light can penetrate to a depth of 20 cm of snow when the density is 0.21 g/cm3. At a depth of 40 cm, less than 0.2% of light is transmitted from the snow surface to ground below. This decrease in light transmission occurs up to the point at which critical compaction is reached. This occurs because the surface area of the ice crystal decreases and it causes less refraction and scattering of light. Once densities reach 0.5 g/cm3, total surface area is reduced, which in turn reduces internal refraction and allows light to penetrate deeper into the snowpack. [3]

Constructive metamorphosis

Constructive metamorphosis is caused by the upward movement of water vapor within the snowpack. Warmer temperatures are found closer to the ground because it receives heat from the core of the earth. Snow has a low thermal conductivity, so this heat is retained, creating a temperature gradient between the air underneath the snowpack and the air above it. Warmer air holds more water vapor. Through the process of sublimation, the newly formed water vapor travels vertically by way of diffusion from a higher concentration (next to the ground) to a lower concentration (near the snowpack surface) by traveling through the air spaces between ice crystals. [4] When the water vapor reaches the top of the snowpack, it is subjected to much colder air, causing it to condense and refreeze, forming ice crystals at the top of the snowpack that can be seen as the layer of crust on top of the snow.

Melt metamorphism

Melt metamorphism is the deterioration of snow by melting. Melting can be stimulated by warmer ambient temperatures, rain, and fog. As snow melts, water is formed and the force of gravity pulls these molecules downward. En route to the ground, they refreeze, thickening in the middle stratum. During this refreezing process, energy is released in the form of latent heat. As more water comes down from the surface, it creates more heat and brings the entire snowpack column to near equal temperature. The firnification of the snow strengthens the snowpack, due to the bonding of grains of snow. Snow around trees and under canopies melts faster due to the reradiation of long-wave radiation. As snow gets older, particles of impurities (pine needles, soil, and leaves, for example) accrue within the snow. These darkened objects absorb more short-wave radiation, causing them to rise in temperature, also reflecting more long-wave radiation.

Related Research Articles

<span class="mw-page-title-main">Frost</span> Coating or deposit of ice

Frost is a thin layer of ice on a solid surface, which forms from water vapor that deposits onto a freezing surface. Frost forms when the air contains more water vapor than it can normally hold at a specific temperature. The process is similar to the formation of dew, except it occurs below the freezing point of water typically without crossing through a liquid state.

<span class="mw-page-title-main">Glacier</span> Persistent body of ice that is moving under its own weight

A glacier is a persistent body of dense ice that is constantly moving under its own weight. A glacier forms where the accumulation of snow exceeds its ablation over many years, often centuries. It acquires distinguishing features, such as crevasses and seracs, as it slowly flows and deforms under stresses induced by its weight. As it moves, it abrades rock and debris from its substrate to create landforms such as cirques, moraines, or fjords. Although a glacier may flow into a body of water, it forms only on land and is distinct from the much thinner sea ice and lake ice that form on the surface of bodies of water.

<span class="mw-page-title-main">Ice</span> Frozen water: the solid state of water

Ice is water that is frozen into a solid state, typically forming at or below temperatures of 0 °C, 32 °F, or 273.15 K. As a naturally occurring crystalline inorganic solid with an ordered structure, ice is considered to be a mineral. Depending on the presence of impurities such as particles of soil or bubbles of air, it can appear transparent or a more or less opaque bluish-white color.

<span class="mw-page-title-main">Snow</span> Precipitation in the form of ice crystal flakes

Snow comprises individual ice crystals that grow while suspended in the atmosphere—usually within clouds—and then fall, accumulating on the ground where they undergo further changes. It consists of frozen crystalline water throughout its life cycle, starting when, under suitable conditions, the ice crystals form in the atmosphere, increase to millimeter size, precipitate and accumulate on surfaces, then metamorphose in place, and ultimately melt, slide or sublimate away.

<span class="mw-page-title-main">Fog</span> Atmospheric phenomenon

Fog is a visible aerosol consisting of tiny water droplets or ice crystals suspended in the air at or near the Earth's surface. Fog can be considered a type of low-lying cloud usually resembling stratus, and is heavily influenced by nearby bodies of water, topography, and wind conditions. In turn, fog affects many human activities, such as shipping, travel, and warfare.

<span class="mw-page-title-main">Avalanche</span> Rapid flow of a mass of snow down a slope

An avalanche is a rapid flow of snow down a slope, such as a hill or mountain.

<span class="mw-page-title-main">Ice crystal</span> Water ice in symmetrical shapes

Ice crystals are solid ice in symmetrical shapes including hexagonal columns, hexagonal plates, and dendritic crystals. Ice crystals are responsible for various atmospheric optic displays and cloud formations.

<span class="mw-page-title-main">Precipitation</span> Product of the condensation of atmospheric water vapor that falls under gravity

In meteorology, precipitation is any product of the condensation of atmospheric water vapor that falls from clouds due to gravitational pull. The main forms of precipitation include drizzle, rain, sleet, snow, ice pellets, graupel and hail. Precipitation occurs when a portion of the atmosphere becomes saturated with water vapor, so that the water condenses and "precipitates" or falls. Thus, fog and mist are not precipitation but colloids, because the water vapor does not condense sufficiently to precipitate. Two processes, possibly acting together, can lead to air becoming saturated: cooling the air or adding water vapor to the air. Precipitation forms as smaller droplets coalesce via collision with other rain drops or ice crystals within a cloud. Short, intense periods of rain in scattered locations are called showers.

<span class="mw-page-title-main">Firn</span> Partially compacted névé

Firn is partially compacted névé, a type of snow that has been left over from past seasons and has been recrystallized into a substance denser than névé. It is ice that is at an intermediate stage between snow and glacial ice. Firn has the appearance of wet sugar, but has a hardness that makes it extremely resistant to shovelling. Its density generally ranges from 0.35 g/cm3 to 0.9 g/cm3, and it can often be found underneath the snow that accumulates at the head of a glacier.

The Wegener–Bergeron–Findeisen process, is a process of ice crystal growth that occurs in mixed phase clouds in regions where the ambient vapor pressure falls between the saturation vapor pressure over water and the lower saturation vapor pressure over ice. This is a subsaturated environment for liquid water but a supersaturated environment for ice resulting in rapid evaporation of liquid water and rapid ice crystal growth through vapor deposition. If the number density of ice is small compared to liquid water, the ice crystals can grow large enough to fall out of the cloud, melting into rain drops if lower level temperatures are warm enough.

<span class="mw-page-title-main">Regelation</span>

Regelation is the phenomenon of ice melting under pressure and refreezing when the pressure is reduced. This can be demonstrated by looping a fine wire around a block of ice, with a heavy weight attached to it. The pressure exerted on the ice slowly melts it locally, permitting the wire to pass through the entire block. The wire's track will refill as soon as pressure is relieved, so the ice block will remain intact even after wire passes completely through. This experiment is possible for ice at −10 °C or cooler, and while essentially valid, the details of the process by which the wire passes through the ice are complex. The phenomenon works best with high thermal conductivity materials such as copper, since latent heat of fusion from the top side needs to be transferred to the lower side to supply latent heat of melting. In short, the phenomenon in which ice converts to liquid due to applied pressure and then re-converts to ice once the pressure is removed is called regelation.

<span class="mw-page-title-main">Snowmelt</span> Surface runoff produced from melting snow

In hydrology, snowmelt is surface runoff produced from melting snow. It can also be used to describe the period or season during which such runoff is produced. Water produced by snowmelt is an important part of the annual water cycle in many parts of the world, in some cases contributing high fractions of the annual runoff in a watershed. Predicting snowmelt runoff from a drainage basin may be a part of designing water control projects. Rapid snowmelt can cause flooding. If the snowmelt is then frozen, very dangerous conditions and accidents can occur, introducing the need for salt to melt the ice.

<span class="mw-page-title-main">Snowpack</span>

Snowpack forms from layers of snow that accumulate in geographic regions and high elevations where the climate includes cold weather for extended periods during the year. Snowpacks are an important water resource that feed streams and rivers as they melt. Therefore, snowpacks are both the drinking water source for many communities and a potential source of flooding. Snowpacks also contribute mass to glaciers in their accumulation zone.

Rain and snow mixed or sleet is precipitation composed of a mixture of rain and partially melted snow. Unlike ice pellets, which are hard, and freezing rain, which is fluid until striking an object where it fully freezes, this precipitation is soft and translucent, but it contains some traces of ice crystals from partially fused snowflakes, also called slush. In any one location, it usually occurs briefly as a transition phase from rain to snow or vice-versa, but hits the surface before fully transforming. Its METAR code is RASN or SNRA.

<span class="mw-page-title-main">Rotten ice</span> Melting or otherwise disintegrating ice on open water

Rotten ice is a loose term for ice that is melting or structurally disintegrating due to being honeycombed by liquid water, air, or contaminants trapped between the initial growth of ice crystals. It may appear transparent or splotchy grey, and it is generally found after spring or summer thaws, presenting a danger to those traveling or spending time in outdoor recreation. The increase of rotten ice vs. solid ice in the Arctic affects ocean-atmosphere heat transfer and year-to-year ice formation, as well as the lives of the Inuit, sea mammals such as walrus and polar bear, and the microorganisms that live inside the ice.

<span class="mw-page-title-main">Classifications of snow</span> Methods for describing snowfall events and the resulting snow crystals

Classifications of snow describe and categorize the attributes of snow-generating weather events, including the individual crystals both in the air and on the ground, and the deposited snow pack as it changes over time. Snow can be classified by describing the weather event that is producing it, the shape of its ice crystals or flakes, how it collects on the ground, and thereafter how it changes form and composition. Depending on the status of the snow in the air or on the ground, a different classification applies.

<span class="mw-page-title-main">Snowflake</span> Ice crystals that fall as snow

A snowflake is a single ice crystal that has achieved a sufficient size, and may have amalgamated with others, which falls through the Earth's atmosphere as snow. Each flake nucleates around a tiny particle in supersaturated air masses by attracting supercooled cloud water droplets, which freeze and accrete in crystal form. Complex shapes emerge as the flake moves through differing temperature and humidity zones in the atmosphere, such that individual snowflakes differ in detail from one another, but may be categorized in eight broad classifications and at least 80 individual variants. The main constituent shapes for ice crystals, from which combinations may occur, are needle, column, plate, and rime. Snow appears white in color despite being made of clear ice. This is due to diffuse reflection of the whole spectrum of light by the small crystal facets of the snowflakes.

The Surface Heat Budget of the Arctic Ocean (SHEBA) study was a National Science Foundation-funded research project designed to quantify the heat transfer processes that occur between the ocean and the atmosphere over the course of a year in the Arctic Ocean, where the sun is above the horizon from spring through summer and below the horizon the rest of the time. The study was designed to provide data for use in global climate models, which scientists use to study global climate change.

<span class="mw-page-title-main">Snow science</span> Interdisciplinary field of hydrology, mechanics and meteorology

Snow science addresses how snow forms, its distribution, and processes affecting how snowpacks change over time. Scientists improve storm forecasting, study global snow cover and its effect on climate, glaciers, and water supplies around the world. The study includes physical properties of the material as it changes, bulk properties of in-place snow packs, and the aggregate properties of regions with snow cover. In doing so, they employ on-the-ground physical measurement techniques to establish ground truth and remote sensing techniques to develop understanding of snow-related processes over large areas.

<span class="mw-page-title-main">Glossary of meteorology</span> List of definitions of terms and concepts commonly used in meteorology

This glossary of meteorology is a list of terms and concepts relevant to meteorology and atmospheric science, their sub-disciplines, and related fields.

References

  1. "Definition of SUBNIVEAN".
  2. Halfpenny, James 69; Ozanne, Roy (1989). Winter: An Ecological Handbook. Johnson Publishing Company.{{cite book}}: CS1 maint: numeric names: authors list (link)
  3. 1 2 Marchand, Peter (1996). Life in the Cold. Hanover: University Press of New England. ISBN   978-0874517859.
  4. Hindelang, Mary. "The Science of Winter Ecology".