This article needs additional citations for verification .(February 2024) |
The drum kit |
---|
Not shown |
See also |
A suspended cymbal is any single cymbal played with a stick or beater rather than struck against another cymbal. Common abbreviations used are "sus. cym.," or "sus. cymb." (with or without the period).
Most drum kits contain at least two suspended cymbals: a crash cymbal and a ride cymbal.
The term comes from the modern orchestra, in which the term cymbals normally refers to a pair of clash cymbals. The first suspended cymbals used in the modern orchestra were one of a pair of orchestral cymbals, supported by hanging it bell upwards (i.e., with concavity opening downward) by its strap. They could be used as a replacement for a gong. [1] This technique is still used, at times, but has largely been replaced by specialised cymbals with larger mounting holes that can be mounted on a cymbal stand.
Occasionally the term suspended cymbal is still used in the original sense of one of a pair of orchestral cymbals hung by its strap, and this is the usage in older scores and may be the wish of modern conductors in playing them. It is essential to check this before committing to a particular technique.
In an orchestral setting, suspended cymbals are most often used for rolled crescendos, or swells. To do this, the percussionist uses a single-stroke roll on the outside edge of the cymbal, using soft mallets, one on each side. The terminology most commonly used to describe this technique is a suspended cymbal roll. At times, a score also calls for hitting the cymbal with a stick or scraping it with a triangle beater. Other techniques utilize the bow of a contrabass, to be drawn slowly across the outside rim of the cymbal. This technique will give a very shrill, eerie sound, particularly useful in film music. Another lesser-known technique is to place a suspended cymbal upside down on a timpani head. The timpanist is instructed to roll ad lib on the suspended cymbal while moving the timpani pedal up and down as a glissando. Film composer Danny Elfman has made great use of this technique, which needs to be performed in a more "transparent" orchestral setting to be heard.
Other composers will use a sample, or recording, of the cymbal struck by a mallet with a long, natural decay. They will then play that segment backwards, so the effect heard is a crescendo to a crisp cutoff of the sound. This is used to great effect for film and pop music to punctuate scenes in many reality television shows.
In a drum kit, nearly all the cymbals used are suspended cymbals in the broadest sense, the main exception being the hi-hat cymbal.
A cymbal is a common percussion instrument. Often used in pairs, cymbals consist of thin, normally round plates of various alloys. The majority of cymbals are of indefinite pitch, although small disc-shaped cymbals based on ancient designs sound a definite note. Cymbals are used in many ensembles ranging from the orchestra, percussion ensembles, jazz bands, heavy metal bands, and marching groups. Drum kits usually incorporate at least a crash, ride, or crash/ride, and a pair of hi-hat cymbals. A player of cymbals is known as a cymbalist.
A drum kit is a collection of drums, cymbals, and sometimes other auxiliary percussion instruments set up to be played by one person. The drummer typically holds a pair of matching drumsticks or special wire or nylon brushes; and uses their feet to operate hi-hat and bass drum pedals.
A percussion instrument is a musical instrument that is sounded by being struck or scraped by a beater including attached or enclosed beaters or rattles struck, scraped or rubbed by hand or struck against another similar instrument. Excluding zoomusicological instruments and the human voice, the percussion family is believed to include the oldest musical instruments. In spite of being a very common term to designate instruments, and to relate them to their players, the percussionists, percussion is not a systematic classificatory category of instruments, as described by the scientific field of organology. It is shown below that percussion instruments may belong to the organological classes of idiophone, membranophone, aerophone and chordophone.
The snare drum is a percussion instrument that produces a sharp staccato sound when the head is struck with a drum stick, due to the use of a series of stiff wires held under tension against the lower skin. Snare drums are often used in orchestras, concert bands, marching bands, parades, drumlines, drum corps, and more. It is one of the central pieces in a drum set, a collection of percussion instruments designed to be played by a seated drummer and used in many genres of music. Because basic rhythms are very easy to learn to play on a snare drum even for children, the instrument is also suitable for the music education for young children and a rhythm band.
The bass drum is a large drum that produces a note of low definite or indefinite pitch. The instrument is typically cylindrical, with the drum's diameter much greater than the drum's depth, with a struck head at both ends of the cylinder. The heads may be made of calfskin or plastic and there is normally a means of adjusting the tension either by threaded taps or by strings. Bass drums are built in a variety of sizes, but size does not dictate the volume produced by the drum. The pitch and the sound can vary much with different sizes, but the size is also chosen based on convenience and aesthetics. Bass drums are percussion instruments and vary in size and are used in several musical genres. Three major types of bass drums can be distinguished.
A crash cymbal is a type of cymbal that produces a loud, sharp "crash" and is used mainly for occasional accents, as opposed to a ride cymbal. It can be mounted on a stand and played with a drum stick, or by hand in pairs. One or two crash cymbals are a standard part of a drum kit. Suspended crash cymbals are also used in bands and orchestras, either played with a drumstick or rolled with a pair of mallets to produce a slower, swelling crash. Sometimes a drummer may hit two different crash cymbals in a kit at the same time to produce a very loud accent, usually in rock music.
A gong is a percussion instrument originating in East Asia and Southeast Asia. A gong is a flat, circular metal disc that is typically struck with a mallet. They can be small or large in size, and tuned or can require tuning.
Timpani or kettledrums are musical instruments in the percussion family. A type of drum categorised as a hemispherical drum, they consist of a membrane called a head stretched over a large bowl traditionally made of copper. Thus timpani are an example of kettle drums, also known as vessel drums and semispherical drums, whose body is similar to a section of a sphere whose cut conforms the head. Most modern timpani are pedal timpani and can be tuned quickly and accurately to specific pitches by skilled players through the use of a movable foot-pedal. They are played by striking the head with a specialized drum stick called a timpani stick or timpani mallet. Timpani evolved from military drums to become a staple of the classical orchestra by the last third of the 18th century. Today, they are used in many types of ensembles, including concert bands, marching bands, orchestras, and even in some rock bands.
The triangle is a musical instrument in the percussion family, classified as an idiophone in the Hornbostel-Sachs classification system. Triangles are made from a variety of metals including aluminum, beryllium copper, brass, bronze, iron, and steel. The metal is bent into a triangular shape with one open end. The instrument is usually held by a loop of some form of thread or wire at the top curve, to enable the triangle to vibrate and it is struck with a metal rod called a "beater". The triangle theoretically has indefinite pitch, and produces a plurality of overtones when struck with an appropriate beater.
Timbales or pailas are shallow single-headed drums with metal casing. They are shallower than single-headed tom-toms and usually tuned much higher, especially for their size. They were developed as an alternative to classical timpani in Cuba in the early 20th century and later spread across Latin America and the United States.
A percussion mallet or beater is an object used to strike or beat a percussion instrument to produce its sound.
Clash cymbals are cymbals played in matched pairs by holding one cymbal in each hand and striking the two together.
In western music, a China cymbal is a distinct type of crash cymbal designed to produce a bright, crisp, and explosive tone that has brought it the nickname trash cymbal. The name "China cymbal" comes from its shape, which is similar to that of the Chinese Bo. Such cymbals are most frequently mounted upside down on cymbal stands, allowing for them to be more easily struck and for a better sound.
Marching percussion instruments are percussion instruments specially designed to be played while moving. This is achieved by attaching the drum(s) to a special harness worn by the drummer, although not all marching bands use such harnesses and instead use traditional baldrics to sling their drums.
The rute, also known as a multi-rod, is a beater for drums. Commercially made rutes are usually made of a bundle of thin birch dowels or thin canes attached to a drum stick handle. These often have a movable band to adjust how tightly the dowels are bound toward the tip. A rute may also be made of a bundle of twigs attached to a drum stick handle. These types of rutes are used for a variety of effects with various musical ensembles. A rute may also be a cylindrical bunch of pieces of cane or twigs, bound at one end, like a small besom without a handle. The rute is used to play on the head of the bass drum. Rute are also constructed from a solid rod thinly split partway down.
Orchestral percussion refers to the various percussion instruments used in an orchestral setting. It may also refer to the act of playing such instruments in an orchestral style. Many music schools and conservatories offer training for musicians interested in developing their skills as orchestral percussionists. Typically, an orchestral percussionist does not specialize in one particular instrument. Although there is no exhaustive list of all instruments that an orchestral percussionist must be able to play, there are particular instruments that are frequently used in the orchestral repertoire. This includes timpani, snare drum, bass drum, xylophone, glockenspiel, triangle, and tambourine.
A drum stick is a type of percussion mallet used particularly for playing snare drum, drum kit, and some other percussion instruments, and particularly for playing unpitched percussion.
In percussion, grip refers to the manner in which the player holds the sticks or mallets, whether drum sticks or other mallets.
An unpitched percussion instrument is a percussion instrument played in such a way as to produce sounds of indeterminate pitch, or an instrument normally played in this fashion.
There are several overlapping schemes for the classification of percussion instruments.