The Swift Folder is a folding bicycle employing a novel folding mechanism, designed by Peter Reich of Design Mobility Inc. of Brooklyn, New York, in collaboration with Jan VanderTuin of the Center for Appropriate Transport in Eugene, Oregon.
The Swift Folder is a folding bicycle employing a novel folding mechanism, designed by Peter Reich of Design Mobility Inc. of Brooklyn, New York, in collaboration with Jan VanderTuin of the Center for Appropriate Transport in Eugene, Oregon.
The Swift Folder was available from made available by Design Mobility in 1996 as a bare Chromoly frame manufactured in low volumes by Human Powered Machines of Eugene, Oregon for customers to build up themselves, or assembled into a complete bicycle to the customer's requirements.
From 2004 [1] to the end of 2016, a mass-market TIG welded 6061-T6 aluminium alloy version of the bicycle with a chromoly steel fork was manufactured in Taiwan under license by Xootr and sold fully assembled as the Xootr Swift, in single-speed and 8-speed models. [2]
In 2023, a ten-speed, disc braked, chromoly steel version of the Swift was reprised for the North American market, manufactured by the Origami Bicycle Company with the blessing of Peter Reich, the original designer. [3] The frame is faithful to the original geometry, but features vertical dropouts, no canti bosses, and a rear rack which keeps the bicycle free-standing when folded.
The Swift Folder design employs a vertical folding method, using the seat-post and a split seat-tube as the locking mechanism.
To fold, the seat-post is released from the two parts of the seat-tube by their respective quick release clamps, then pulled up into the upper part of the seat-tube to unlock the frame. A pivot in the main frame tube then allows the rear triangle (comprising the seat-stays, chain-stays and the lower portion of the seat-tube) and rear wheel to swing down and forward under the main tube. The seat-post is then slid back down through the upper part of the seat-tube to lock the rear wheel in the folded position.
To unfold, the seat-post is again pulled up to allow the rear triangle to swing back and up into the normal riding position. The seat-post is then slid down through the upper and lower parts of the seat-tube, locking the rear triangle and wheel into place. [4]
The Swift frame is simple and robust, and allows a quick fold, but when folded is not as compact as some other folding bicycle designs. The bottom bracket forms part of the folding rear triangle, and as a result the bottom bracket to rear fork-end distance remains constant throughout the fold. This keeps the chain tension constant, which is an advantage when the Swift frame is used in a fixed-gear, single speed, or hub gear bicycle.
The frame is generally built to common "industry-standard" sizes and threads, and can accommodate a wide variety of gear systems, brakes and other components. The rear fork spacing of 132.5mm [5] can accommodate most standard road and mountain bike wheel-hubs.
The seat post, which is crucial to the rigidity of the folding mechanism, has an OD of 34.0mm. The individual seat tubes prior to completion will receive a seat post of 33.9mm, [6] but, because of the frame construction, the two parts of the seat tube are reamed in a single operation so that there is no lip, with a resultant slight loss of material, and a 34.0mm OD seat post became the factory standard. [7] [8] In practice, a 33.9mm OD seat post, as found on the Brompton and Tern, will often work, and Xootr offered a Cane Creek Thudbuster [9] seat post for the Swift that had an OD of 33.9mm.
The Swift Folder is normally fitted with "20 inch" wheels. The standard ISO 5775 wheel size is 406mm (traditionally known as 20x1 to 20x2.125), the same size used on most BMX bicycles. A wide variety of wheels and tires are available in this size.
The Swift Folder is also designed to work with 20 inch 451mm wheels. The linear pull brakes that come standard with the Swift will not work with 451s. The frame is designed to work with Caliper brakes with the larger wheels. The wheelbase is 40.5 inches (103 cm)
Reviews of the Swift have generally been positive. The Swift has been praised for its responsive, comfortable ride, its stiff frame, its light weight, its low step-through height, and its use of standard as opposed to proprietary parts for the components. This includes the wheels, tires, handlebars, seat, shifter, brakes, chainring and cogset, all of which can easily be replaced. Reviews usually call out the large folded size and cumbersome folded shape as a disadvantage. It is sometimes also pointed out that the Swift doesn't stand when folded. There was some disagreement as to whether its price was high for the range, though commentary on that point tended to be muted as the price for the Xootr Swift was generally in line with mass market folding bikes. [10] [11] [12] [13] [14] [15] [16]
Given the generally positive reviews and the competitive price, it is likely that the large folded size was the sticky point for many buyers, as many more bicycles with higher pricetags and smaller sizes have been sold.
A bicycle, also called a pedal cycle, bike, push-bike or cycle, is a human-powered or motor-assisted, pedal-driven, single-track vehicle, with two wheels attached to a frame, one behind the other. A bicycle rider is called a cyclist, or bicyclist.
A mountain bike (MTB) or mountain bicycle is a bicycle designed for off-road cycling. Mountain bikes share some similarities with other bicycles, but incorporate features designed to enhance durability and performance in rough terrain, which often makes them heavier, more complex and less efficient on smooth surfaces. These typically include a suspension fork, large knobby tires, more durable wheels, more powerful brakes, straight, extra wide handlebars to improve balance and comfort over rough terrain, and wide-ratio gearing optimised for topography, application and a frame with a suspension mechanism for the rear wheel. Rear suspension is ubiquitous in heavier-duty bikes and now common even in lighter bikes. Dropper seat posts can be installed to allow the rider to quickly adjust the seat height.
A tricycle, sometimes abbreviated to trike, is a human-powered three-wheeled vehicle.
Xootr is a manufacturer of folding kick scooters and was formerly a seller of folding bicycles. Xootr scooters are characterized by 180mm wheels with aluminum hubs, and a hand brake for the front wheel. One defining feature of Xootr scooters is the relatively large wheels they are equipped with, as well as the hinge system, which uses a pin.
A bicycle frame is the main component of a bicycle, onto which wheels and other components are fitted. The modern and most common frame design for an upright bicycle is based on the safety bicycle, and consists of two triangles: a main triangle and a paired rear triangle. This is known as the diamond frame. Frames are required to be strong, stiff and light, which they do by combining different materials and shapes.
A bicycle wheel is a wheel, most commonly a wire wheel, designed for a bicycle. A pair is often called a wheelset, especially in the context of ready built "off the shelf" performance-oriented wheels.
The Cannondale Bicycle Corporation is an American division of Dutch conglomerate Pon Holdings that supplies bicycles. Its headquarters are in Wilton, Connecticut, with engineering offices in Freiburg, Germany. Frames are manufactured in Taiwan. Bikes are assembled in Taiwan, as well as in the USA and in The Netherlands for the local markets.
A racing bicycle, also known as a road bike is a bicycle designed for competitive road cycling, a sport governed by and according to the rules of the Union Cycliste Internationale (UCI).
A bicycle fork is the part of a bicycle that holds the front wheel.
The Birdy is a folding bicycle designed by Riese und Müller in Germany and produced by Pacific Cycles in Taiwan. As of 2010 over 100,000 had been sold. Three distinct models have been marketed, in addition to some specialist variations, with the third (Mk3) introduced in July 2015.
A bicycle trailer is a motorless wheeled frame with a hitch system for transporting cargo by bicycle. It can greatly increase a bike's cargo capacity, allowing point-to-point haulage of objects up to 3 cubic metres in volume that weigh as much as 500 kg. However, very heavily loaded trailers may pose a danger to the cyclist and others, and the voluntary European standard EN 15918 therefore suggests a maximum load of 60 kg on trailers without brakes.
Strida is a portable belt-driven folding bicycle with a distinctive A-shaped collapsible frame, designed by British engineer and designer Mark Sanders. The first model, Strida 1, was released in 1987 and the latest, Strida 5.2, in 2009.
Bicycle suspension is the system, or systems, used to suspend the rider and bicycle in order to insulate them from the roughness of the terrain. Bicycle suspension is used primarily on mountain bikes, but is also common on hybrid bicycles.
The Bickerton, also called the Bickerton Portable, was a portable aluminium folding bicycle designed by Harry Bickerton and manufactured in the UK and Australia between 1971 and 1989. Bickerton, an accomplished engineer, suffered a three-year driving ban for drink-driving in 1970 following a car crash, and invented the bike for himself, to be carried onto public transport or stored in the trunk of a car as small as an Austin Mini.
A luggage carrier, also commonly called a (bicycle)rack, is a device attached to a bicycle to which cargo or panniers can be attached. This is popular with utility bicycles and touring bicycles.
A folding bicycle is a bicycle designed to fold into a compact form, facilitating transport and storage. When folded, the bikes can be more easily carried into buildings, on public transportation, and more easily stored in compact living quarters or aboard a car, boat or plane.
The Bootie Folding Cycle, or 'Bootie', is a rare folding bicycle produced in West Yorkshire UK from 1965 to 1973.
Graziella is an Italian compact, folding bicycle designed by the renowned Rinaldo Donzelli in 1964; since then, the name Graziella is used in Italy for any bicycle that shares the same fundamental design. The original Graziella was built by Carnielli and sold under the Bottecchia marque.
{{citation}}: CS1 maint: bot: original URL status unknown (link){{citation}}: CS1 maint: bot: original URL status unknown (link){{citation}}: CS1 maint: bot: original URL status unknown (link)