The design was originally commissioned by Will Eckert, of Flying Dutchman Yachts and C.T. Chen, of Ta Yang Yacht Building. The latter bought the rights to the design and commenced production as the CT 37. It was initially called the Ta Chiao 37 and then the Ta Yang 37, before the name was changed to the Tayana 37.[1][4]
Production
The design is built by Ta Yang Yacht Building, under the Tayana Yachtsbrand in Taiwan. The company had built 588 boats by 2012 and the design remained available for orders in 2020.[1][3][5][4][6]
Design
The Tayana 37 is a recreational keelboat, built predominantly of fiberglass, with teak wood trim, including teak decks. It is a cutter riggedsloop, with a few built with the optional ketch rig. The boat has spruce or aluminum spars and a bowsprit that brings the length to 42.17ft (12.85m). A pilothouse was also optional. The design has a spooned raked stem, a canoe transom, a keel-mounted rudder controlled by a wheel and a fixed modified long keel, with a cutaway forefoot. It displaces 22,500lb (10,206kg) and carries 8,000lb (3,629kg) of iron ballast.[1][3][4]
The boat has a draft of 5.67ft (1.73m) with the standard keel.[1]
The boat is fitted with a Japanese Yanmardiesel engine of 33hp (25kW) for docking and maneuvering. The fuel tank holds 90 U.S. gallons (340L; 75impgal) and the fresh water tank has a capacity of 100 U.S. gallons (380L; 83impgal).[1]
The design interior arrangement varies based on the rig and customer preferences. A typical configuration has sleeping accommodation for seven people, with a double "V"-berth in the bow cabin, a U-shaped settee with a drop-down dinette table and a straight settee in the main cabin, with a pilot berth above and an aft cabin with a double berth on the starboard side. The galley is located on the port side just forward of the companionway ladder. The galley is U-shaped and is equipped with a three-burner propane-fired stove, an oven and a double sink. A navigation station is opposite the galley, on the starboard side. The head is located just aft of the bow cabin on the port side and includes a shower, with a teak floor grating, plus hot and cold pressurized water. The interior trim and doors are all made from teak.[3]
Ventilation is provided by eleven bronze ports, a teak forward hatch and a teak-framed skylight.[3]
For sailing the design is equipped with two travelers, including a staysail traveler, as the staysail is boom-mounted and a mainsheet traveler. There are two winches for the jib sheets, one for the jib, one for the mainsheet and three for the three sail halyards. There are jib tracks mounted on the toe rails, plus outboard shrouds.[3]
The design has a PHRF racing average handicap of 126.[3]
Operational history
Tayana 37
In a 1994 review Richard Sherwood wrote that the "Tayana [37] is in many respects — perhaps except for the double-ended design — typical of the many high-performance designs built today that retain a traditional appearance."[3]
In a 2019 review, Charles Doane wrote, "the Tayana 37 is the most successful of the many Taiwan-built double-ended full-keel cruisers that were conceived in the mid-1970s in the wake of the great success of the Westsail 32 ... This boat is quite heavy by today's standards, but it sails remarkably well and can serve effectively as both a coastal and bluewater cruiser. It has a particularly strong reputation as an offshore boat and is certainly one of the more popular bluewater cruisers ever built. Reportedly at any given time there are more Tayana 37s out there wandering the globe than any other single type of sailboat."[4]
Writing a review in 2012 Steve Knauth noted, "the Tayana 37 is distinguished most by its double-ended hull. The deep, full-keel bottom is designed for bluewater cruising, and the vessel’s 22,500-pound displacement includes 8,000 pounds of outside ballast. Construction is solid, hand-laid fiberglass. Designer Robert Perry drew up two twin-headstay rigs, and the boat was rigged either as a cutter or ketch. Both versions carry large sail plans — the cutter more than 800 square feet, the ketch more than 750. They’re based on a high aspect mainsail for upwind work and twin headsails for versatility. The deck profile shows a traditional trunk cabin ahead of a roomy aft cockpit with pedestal steering and controls, surrounded by a high coaming. Bow and stern pulpits are joined by double lifelines with both port and starboard gates. There’s also a pilothouse deck plan with a protected steering station."[7]
The Island Packet 35 is an American sailboat that was designed by Robert K. Johnson as a cruiser and first built in 1988.
The Southern Cross 35, also called the Gillmer 35, is an American sailboat that was designed by Thomas C. Gillmer as a cruiser and first built in 1978.
The Vancouver 36 is an American sailboat that was designed by Robert B. Harris as a bluewater ocean cruiser and first built in 1977.
The Dickerson 37 is an American sailboat that was designed by George Hazen as a cruiser and first built in 1980.
The Dockrell 37 is a British sailboat that was designed by Dockrell Yachts as a cruiser and first built in 1981.
The Alberg 37 is a Canadian sailboat that was designed by Carl Alberg as a racer-cruiser and first built in 1967.
The Endeavour 37 is an American sailboat that was designed by Dennis Robbins as racer-cruiser and first built in 1977.
The Shannon 38 is an American sailboat that was designed by Walter Shultz, plus George Stadel III and George H. Stadel Jr. of G, H. Stadel & Son as a cruiser and first built in 1975.
The Alajuela 38 is an American sailboat that was designed by William Atkin as a cruiser and first built in 1977.
The Corbin 39 is a Canadian sailboat that was designed by Robert Dufour and Marius Corbin as a global circumnavigation cruiser and first built in 1979.
The Islander 40 is an American sailboat that was designed by Doug Peterson as a racer-cruiser and first built in 1979.
The Endeavour 40 is an American sailboat that was designed by Robert K. Johnson as a cruiser and first built in 1981.
The Dickerson 41 is an American sailboat that was designed by Ernest Tucker as a cruiser and first built in 1973.
The Lord Nelson 41 is an American sailboat that was designed by Loren Hart as a cruiser and first built in 1982.
The Irwin 41 is an American sailboat that was designed by Ted Irwin as a cruiser and first built in 1982.
The Nauticat 44 is a Finnish motorsailer sailboat that was designed by Kaj Gustafsson as a cruiser and first built in 1974.
The Alden 44 is an American sailboat that was designed by Alden Associates and Niels Helleberg as an International Offshore Rule racer and first built in 1976.
The Beneteau First Class 10 is a French sailboat that was designed by Jean Marie Finot of Groupe Finot and Jacques Fauroux as a racer/cruiser and first built in 1982.
The Allegra 24 is an American trailerable sailboat that was designed by Fred Bingham and Lou Nagy and based upon the work of Fred Bingham's son, Bruce Bingham. The boat is intended as a cruiser and was first built in 1984.
The Seafarer 36C is an American sailboat that was designed by Philip Rhodes as a cruiser and first built in 1968. The boat was built with a ketch rig or an optional sloop rig, without the mizzen mast, but with a taller main mast. The design was based on Rhodes Design #702.
↑ McArthur, Bruce (2020). "Robert Perry". sailboatdata.com. Archived from the original on 26 September 2019. Retrieved 11 May 2020.
1 2 3 4 5 6 7 8 Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 368-369. Houghton Mifflin Company, 1994. ISBN0-395-65239-1
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
