Toyota P engine

Last updated
Toyota P engine
Toyota 3P engine.jpg
Overview
Manufacturer Toyota
Production19591994
Layout
Configuration Inline 4
Displacement 1.0 L (997 cc)
1.2 L (1,198 cc)
1.3 L (1,345 cc)
1.5 L (1,493 cc)
Cylinder bore 69.9 mm (2.75 in)
76.6 mm (3.02 in)
Piston stroke 65 mm (2.56 in)
73 mm (2.87 in)
81 mm (3.19 in)
Combustion
Fuel type Gasoline
Cooling system Water-cooled
Output
Power output 28–65 PS (21–48 kW; 28–64 hp)
Torque output 8.8–10.3 kg⋅m (86–101 N⋅m; 64–75 lb⋅ft)

The Toyota P engine family is an overhead valve inline-four engine produced from October 1959 through 1994. Originally fitted to the Corona passenger car, it was soon relegated to commercial use vehicles and for its latter two decades it mostly powered various forklifts.

Contents

P

The 1.0 L (997 cc) P was produced from 1959 through 1961. Bore and stroke are 69.9 mm × 65 mm (2.75 in × 2.56 in).

2P

The 1.2 L (1,198 cc) 2P was produced from 1961 through 1972. This was bored out to 76.6 mm (3.02 in), while retaining the short 65 mm (2.56 in) stroke. Power is 55 PS (40 kW; 54 hp) at 5,000 rpm, while torque is 8.8 kg⋅m (86 N⋅m; 64 lb⋅ft) at 2,800 rpm. [2]

3P

The 1.3 L (1,345 cc) 3P was produced from 1967 through 1979. Bore and stroke is 76.6 mm × 73 mm (3.02 in × 2.87 in). Power is usually 65 PS (48 kW; 64 hp) at 5,000 rpm, with torque of 10.3 kg⋅m (101 N⋅m; 75 lb⋅ft) at 3,000 rpm. [5] [6]

4P

The 1.5 L (1,493 cc) 4P (retaining the 76.6 mm (3.02 in) bore but with a longer 81 mm (3.19 in) stroke) mostly saw use in off-road equipment such as forklifts and loaders, where it was used until at least 1994 for the Toyota 5FGL. It produces 30 PS (22 kW; 30 hp) at 2400 rpm as fitted to the Toyota 2SGK6 loader (1993). [10] In the 1972 2FG20 2-ton forklift it has 35 PS (26 kW; 35 hp) at 2800 rpm. [11]

See also

Related Research Articles

After an early flirtation with V-twin engines, Mazda's small cars of the 1960s were powered by OHV straight-2 and straight-4 engines. This family lasted from 1961 until the mid-1970s. Today, Mazda's keicars use Suzuki engines. It was produced at the Hiroshima Plant in Hiroshima, Japan.

<span class="mw-page-title-main">Toyota M engine</span> Reciprocating internal combustion engine

Toyota Motor Corporation's M family of engines were a longitudinally mounted straight-6 engine design. They were used from the 1960s through the 1990s. All M family engines were OHC designs. While the M family was born with a chain-driven single camshaft it evolved into a belt-driven DOHC system after 1980. All M family engines used a cast-iron block with an aluminum cylinder head, and were built at the Toyota Kamigo plant in Toyota City, Japan.

<span class="mw-page-title-main">Toyota RZ engine</span> Reciprocating internal combustion engine

The Toyota RZ engine family is a straight-four piston engine series built in Japan. The RZ series uses a cast-iron engine block and aluminum SOHC or DOHC cylinder heads. It has electronic fuel injection (EFI), 2 or 4 valves per cylinder and features forged steel connecting rods.

<span class="mw-page-title-main">Toyota VZ engine</span> Reciprocating internal combustion engine

The Toyota VZ engine family is a series of V6 gasoline piston engines ranging from 2.0 to 3.4 L in displacement and both SOHC and DOHC configurations. It was Toyota's first V6 engine, being made as a response to Nissan’s VG engine, one of Japan's first mass-produced V6 engines.

<span class="mw-page-title-main">Toyota U engine</span> Reciprocating internal combustion engine

The Toyota U engine is a series of flat engines produced by Toyota. The original version of this engine was produced in the 1960s and 1970s in flat-twin configuration. The engine series was extended in 2012 for the engine derived from the Subaru flat-four for the Toyota 86.

<span class="mw-page-title-main">Toyota R engine</span> Reciprocating internal combustion engine

The Toyota R family was a series of inline-four gasoline automobile engines. Designed for longitudinal placement in such vehicles as the Celica and Hilux and in production from 1953 through 1997, usage faded out as many of Toyota's mainstream models moved to front-wheel drive. Overhead cam (OHC) versions featured a chain-driven camshaft.

<span class="mw-page-title-main">Toyota K engine</span> Reciprocating internal combustion engine

The Toyota K series is an inline-four engine that was produced from 1966 through 2007. It is a two-valve pushrod engine design. It was originally built from the Toyota Kamigo plant in Toyota City factory in Japan.

<span class="mw-page-title-main">Toyota T engine</span> Reciprocating internal combustion engine

The Toyota T series is a family of inline-4 automobile engines manufactured by Toyota beginning in 1970 and ending in 1985. It started as a pushrod overhead valve (OHV) design and later performance oriented twin cam (DOHC) variants were added to the lineup. Toyota had built its solid reputation on the reliability of these engines.

<span class="mw-page-title-main">Toyota GR engine</span> Reciprocating internal combustion engine

The Toyota GR engine family is a gasoline, open-deck, piston V6 engine series. The GR series has a 60° die-cast aluminium block and aluminium DOHC cylinder heads. This engine series also features 4 valves per cylinder, forged steel connecting rods and crankshaft, one-piece cast camshafts, a timing chain, and a cast aluminium lower intake manifold. Some variants use multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port fuel injection or D4-S.

<span class="mw-page-title-main">Nissan A engine</span> Reciprocating internal combustion engine

The Nissan A series of internal combustion gasoline engines have been used in Datsun, Nissan and Premier brand vehicles. Displacements of this four-stroke engine family ranged from 1.0-liter to 1.5-liter and have been produced from 1967 till 2009. It is a small-displacement four-cylinder straight engine. It uses a lightweight cast iron block and an aluminum cylinder head, with overhead valves actuated by pushrods.

The Nissan H series of automobile engines is an evolution of the Nissan "R" engine which was based on the 1.5-liter, three-main bearing "G" engine used in the 1960s. Both inline-four and inline-six versions were produced. It is a pushrod OHV design with iron block, early models with an iron head, later models with aluminum head. Versions of this motor have been used in many Nissan autos and forklifts, well into the eighties and a version called H20II was in production until 2003. The SD diesels are based on this series of motors

The Nissan D-series is an overhead valve series of engines which first appeared in 1964, with the 1.05-liter D engine. Similar to a number of British and other Datsun engines, it may have been derived from an Ohta design which also found its way into some Kurogane vehicles - both of these companies were swallowed up by Nissan in the early 1960s.

<span class="mw-page-title-main">Prince G engine</span> Reciprocating internal combustion engine

The Prince G-series engine was the company's only straight-four and straight-six engines which began production in 1955. A number of variations were made, with both OHV and OHC heads. A diesel four-cylinder with 1.9 L (1,862 cc) was also built, called the D-6. The G series was used in the Skyline, the Laurel, and the Gloria from the 1950s to the early 1970s.

<span class="mw-page-title-main">Toyota E engine</span> Reciprocating internal combustion engine

The Toyota E engine family is a straight-four piston engine series, and uses timing belts rather than chains. The E engines were the first multi-valve engines from Toyota designed with economy, practicality and everyday use in mind. Like many other Toyota engines from the era, the E engine series features a cast iron block, along with an aluminium cylinder head. E engines are lighter than earlier Toyota engines, due to the hollow crankshaft, thinned casting of the cylinder block, and several other reductions in auxiliaries as well as in the engine itself. Carbureted versions include a newly designed, variable-venturi carburetor. All of these changes improved economy and emissions. The members of the E engine family, range from 1.0 L to 1.5 L. The E family supplanted the K engines in most applications. A large number of parts in the E engine series are interchangeable between each other.

<span class="mw-page-title-main">Toyota L engine</span> Reciprocating internal combustion engine

The L family is a family of inline four-cylinder diesel engines manufactured by Toyota, which first appeared in October 1977. It is the first diesel engine from Toyota to use a rubber timing belt in conjunction with a SOHC head. Some engines like the 2L-II and the 2L-T are still in production to the present day. As of August 2020, the 5L-E engine is still used in Gibraltar in the fifth-generation Toyota HiAce, eighth-generation Toyota Hilux, second-generation Toyota Fortuner, and fourth-generation Toyota Land Cruiser Prado. Vehicles with the diesel engine were exclusive to Toyota Japan dealership locations called Toyota Diesel Store until that sales channel was disbanded in 1988.

<span class="mw-page-title-main">Toyota KD engine</span> Reciprocating internal combustion engine

The Toyota KD engine series is a diesel engine produced by Toyota which appeared in 2000.

<span class="mw-page-title-main">Toyota TR engine</span> Reciprocating internal combustion engine

The Toyota TR engine is a family of gasoline engines that appeared in 2004. They are mainly used for Toyota Hilux and other vehicles in the Toyota IMV platform; and are designed to be mounted longitudinally for pickup RWD and 4WD pickup applications.

The Mitsubishi Neptune or 4G4 engine is a series of iron-block OHV inline-four engines built by Mitsubishi Motors from June 1971 to 1981. This was to be Mitsubishi's last OHV engine. The inability to clear new passenger car emissions rules for 1978 meant that the Neptunes were replaced by the 4G1 Orion. The Neptune continued to be built until 1979 for commercial vehicles, which suffered less restrictive environmental regulations and until about 1981 for other applications. Around 520,000 Neptune engines were built.

<span class="mw-page-title-main">Toyota Y engine</span> Reciprocating internal combustion engine

The Toyota Y engine is a series of overhead valve straight-four petrol engines manufactured by Toyota from 1982 through 1996. The Y engine has mostly been used in commercial and off-road vehicles.

The ToyotaC engine family was a series of inline-4 diesel engines. There were two earlier generations of an engine Toyota named as the "Type C". The first generation was introduced in 1940 as a modification of the Type A engine. This first "Type C" was installed in the Toyota AE. The second generation was the first diesel engine at 1500cc used in the CS20 series 1959 Toyota Crown in October 1959. Japanese market vehicles with diesel engines were exclusive to Toyota Japan dealerships called Toyota Diesel Shop locations from 1979 until the dealership was cancelled in 1988.

References

  1. Ozeki, Kazuo (2007). 日本のトラック・バス 1917~1975[Japanese Trucks and Buses 1917-1975] (in Japanese). Tokyo: Miki Press. pp. 76–77. ISBN   978-4-89522-487-1.
  2. 1 2 "1962年型 コロナライン ライトバン PT26" [1962 Coronaline Light Van PT26 type] (in Japanese). 昭和30年代の車 [Cars of the Showa 30's]. Retrieved 2012-10-03.
  3. Ozeki, pp. 77, 86
  4. 1 2 Hajek, Alexander. "Toyota Corona T4/T5". Toyotaoldies.de. Retrieved 2011-08-21.
  5. 1 2 Toyota Commercial Cars (brochure) (in Japanese), Toyota, 1969
  6. Corona Van (brochure) (in Japanese), Toyota, June 1970, pp. 14–15, 10095-4506
  7. Toyopet Corona RT80, 90 (parts catalog) (in Japanese), Japan: Toyota, June 1978, pp. 2–4, 52229-78
  8. Hajek, Alexander. "Toyota Corona T8/T9". Toyota Oldies.
  9. Piston Ring Sets Price List (PDF), vol. 18, Tokyo, Japan: Riken Corporation, November 2008, p. 70, archived from the original (PDF) on 2013-05-31
  10. Toyota Skid Steer Loader SDK6-8 repair manual (PDF), USA: Toyota Motor Corporation, July 1993, p. 16, 95730
  11. 自動車ガイドブック: Japanese motor vehicles guide book 1972—73 (in Japanese), vol. 19, Japan: Japan Automobile Manufacturers Association, 1972-10-23, p. 293