Trixformer | |
---|---|
Role | Autogyro |
National origin | Austria |
Manufacturer | Trixy Aviation Products |
First flight | March 2014 |
Status | In production (2017) |
Unit cost | €100,000 (2015) |
The Trixy Trixformer is an Austrian roadable aircraft autogyro/electric motorcycle designed and produced by Trixy Aviation Products of Dornbirn, introduced in 2014. The vehicle is supplied complete and ready-to-fly. [1]
The Trixformer is based upon a two-wheeled electric motorcycle chassis as a land vehicle and is designed to add modular flying components. It can be equipped and flown as an autogyro, with the plug-in gyro module. Helicopter or fixed wing aircraft modules were under development in 2015. [1]
As an autogyro, the Trixformer features a single main rotor, a two-seats-in tandem open cockpit with a windshield, tricycle landing gear, plus a tail caster and a four-cylinder, liquid and air-cooled, four stroke 130 hp (97 kW) Trixy 912 Ti engine in pusher configuration. [1]
The aircraft fuselage is made from metal tubing and composites. Its two-bladed rotor has a diameter of 8.6 m (28.2 ft). The aircraft has a typical empty weight of 350 kg (772 lb) and a gross weight of 560 kg (1,235 lb), giving a useful load of 210 kg (463 lb). With full fuel of 80 litres (18 imp gal; 21 US gal) the payload for the pilot, passenger and baggage is 153 kg (337 lb). [1]
Unlike many other autogyro builders Trixy Aviation uses a swash plate in its rotor head designs, rather than a tilt head. This makes the design more sensitive to fly and requires special type training. [1]
Data from Tacke [1]
General characteristics
Performance
The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The ELA 07 is a series of Spanish autogyros, designed and produced by ELA Aviación of Córdoba, Andalusia. The aircraft are supplied complete and ready to fly.
The ArrowCopter is a series of Austrian autogyros, designed and produced by FD-Composites GmbH of Zeillern. When it was in production the ArrowCopter AC20 series was supplied as complete, factory built, ready-to-fly-aircraft.
The Trixy G 4-2 R is an Austrian autogyro, designed and produced by Trixy Aviation Products of Dornbirn. The aircraft was introduced at the Aero show held in Friedrichshafen in 2011 and when it was available it was supplied as a complete ready-to-fly-aircraft.
The Celier Xenon 4 is a Maltese autogyro designed by Raphael Celier and produced by Celier Aviation of Safi, Malta. The aircraft is supplied complete and ready-to-fly.
The ELA Aviation ELA 10 Eclipse is a two place enclosed autogyro, designed and built by ELA Aviación of Córdoba, Andalusia, introduced at the AERO Friedrichshafen airshow in 2014. The aircraft is supplied complete and ready-to-fly.
The Apollo Gyro AG1 is a Hungarian autogyro produced by Apollo Ultralight Aircraft, of Eger and introduced in 2012. The aircraft is supplied ready-to-fly.
The Trendak Tercel is a Polish autogyro designed and produced by Aviation Artur Trendak of Jaktorów-Kolonia, Poland, introduced at the AERO Friedrichshafen show in 2014. The aircraft is supplied complete and ready-to-fly.
The Aviomania G2SA Genesis Duo is a Cypriot autogyro designed in 2007 by Nicolas Karaolides and produced by Aviomania of Larnaca. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The Aviomania G1SA Genesis Solo is a Cypriot autogyro that was designed by Nicolas Karaolides and produced by Aviomania of Larnaca. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The DTA J-RO is a French autogyro designed and produced by DTA sarl of Montélimar. The aircraft is supplied complete and ready-to-fly.
The ELA 09 Junior is a Spanish autogyro designed and produced by ELA Aviación of Córdoba, Andalusia, introduced in the mid-2010s. The aircraft is supplied complete and ready-to-fly.
The Freewind Bumble B is a French autogyro that was designed and produced by Freewind Aviation of Vimory, introduced in about 2013. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.
The German Gyro Matto is a German autogyro, designed and produced by German Gyro Safety Aviation GmbH of Menden, introduced at the AERO Friedrichshafen airshow in 2013. The aircraft is supplied complete and ready-to-fly.
The Niki Kallithea is a Bulgarian autogyro designed and produced by Niki Rotor Aviation of Pravets, introduced in 2011. The aircraft is supplied complete and ready-to-fly.
The Shaanxi Baojii Special Vehicles Lie Ying Falcon is a Chinese autogyro that was designed and produced by the Shaanxi Baojii Special Vehicles Manufacturing Company of Baoji in Shaanxi province. The aircraft was supplied complete and ready-to-fly.
The SkyCruiser Autogyro SkyCruiser is a series of Hungarian autogyros designed and produced by SkyCruiser Autogyro KFT of Inárcs. It was publicly introduced at the AERO Friedrichshafen airshow in 2014. The aircraft is supplied complete and ready-to-fly.
The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.
The Trixy Princess is an Austrian autogyro designed and produced by Trixy Aviation Products of Dornbirn. The aircraft is supplied complete and ready-to-fly.
The Trixy Liberty is an Austrian autogyro designed and produced by Trixy Aviation Products of Dornbirn. The aircraft is supplied complete and ready-to-fly.