AVE Mizar

Last updated
AVE Mizar
AVE-Mizar-1973-N68X-XL.jpg
A Mizar at Oxnard Airport, Oxnard, California, August 1973
Role Roadable aircraft
National origin United States
ManufacturerAdvanced Vehicle Engineers
DesignerHenry Smolinski
Introduction1973
Number built2
Developed from Ford Pinto, Cessna Skymaster

The AVE Mizar (named after the star Mizar) was a roadable aircraft built between 1971 and 1973 by Advanced Vehicle Engineers (AVE) of Van Nuys, Los Angeles, California. The company was started by Henry Smolinski and Harold Blake, both graduates of Northrop Institute of Technology's aeronautical engineering school. [1]

Contents

Development

Prototypes

The prototypes of the Mizar were made by mating the rear portion of a Cessna Skymaster to a Ford Pinto. [2] The pod-and-twin-boom configuration of the Skymaster was a convenient starting point for a hybrid automobile/airplane. The passenger space and front engine of the Skymaster were removed, leaving an airframe ready to attach to a small car. AVE planned to have its own airframe purpose-built by a subcontractor for production models, rather than depending on Cessna for airframes. [3]

By mid-1973, two prototypes had been built and three more were under construction. One prototype was slated for static display at a Van Nuys Ford dealership, owned by AVE partner Bert Boeckmann. The other prototype, fitted with a Teledyne Continental Motors 210 horsepower (160 kW) engine, was unveiled to the press on May 8, 1973. Both vehicles were photographed by Petersen Publishing photographer Mike Brenner for Hot Rod magazine in late April. It then began a series of taxi tests at Van Nuys Airport. AVE made special arrangements to do flight testing at the U.S. Navy's test facilities at Naval Air Station Point Mugu, California. AVE stated that Federal Aviation Administration certification flights were underway in mid-1973. [4] [ page needed ] [5]

The Mizar was intended to use both the aircraft engine and the car engine for takeoff. This would considerably shorten the takeoff roll. Once in the air, the car engine would be turned off. Upon landing, the four-wheel braking would stop the craft in 525 ft (160 m) or less. On the ground, telescoping wing supports would be extended and the airframe would be tied down like any other aircraft. The Pinto could be quickly unbolted from the airframe and driven away. [5]

Production was scheduled to begin in 1974. AVE had stated that prices would range from US$18,300 to $29,000. [5]

Test flights

On a test flight from Camarillo Airport in California on August 26, 1973, according to test pilot Charles "Red" Janisse, the right wing strut base mounting attachment failed soon after takeoff. Because turning the aircraft would put too much stress on the unsupported wing, Janisse put the aircraft down in a bean field. After the roadway was closed to traffic, Janisse drove the otherwise undamaged aircraft back to the airport.

On September 11, 1973, during a test flight at Camarillo, the right wing strut again detached from the Pinto. With Janisse not available for this test flight, Mizar creator Smolinski was at the controls. Although some reports say the Pinto separated from the airframe, air traffic controller Reed Weske, who was watching through binoculars, said the aircraft disintegrated after taking off and making a right turn. [6] According to Janisse, the wing folded because the pilot tried to turn the aircraft when the wing strut support failed. Smolinski and the Vice President of AVE, Harold Blake, were killed in the resulting crash. [6] [7]

Analysis

Even though the Pinto was a light car, the total aircraft without passengers or fuel was already slightly over the certified gross weight of a Skymaster. However, in addition to poor aircraft design and loose parts, the National Transportation Safety Board reported that bad welds were partly responsible for the crash, with the right wing strut attachment failing at a body panel of the Pinto. [8] [9]

Specifications

Data fromSpecial Use Vehicles: An Illustrated History of Unconventional Cars and Trucks Worldwide and Peterson's Complete Ford Book

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Flying car</span> Car that can be flown in much the same way as a car may be driven

A flying car or roadable aircraft is a type of vehicle which can function both as a personal car or automobile and as an aircraft. As used here, this includes vehicles which drive as motorcycles when on the road. The term "flying car" is also sometimes used to include hovercars.

<span class="mw-page-title-main">Landing gear</span> Aircraft component for takeoff and landing and which supports the aircraft while not in the air

Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called alighting gear by some manufacturers, such as the Glenn L. Martin Company. For aircraft, Stinton makes the terminology distinction undercarriage (British) = landing gear (US).

<span class="mw-page-title-main">Junkers Ju 287</span> Prototype German jet bomber

The Junkers Ju 287 was an aerodynamic testbed built in Nazi Germany to develop the technology required for a multi-engine jet bomber. It was powered by four Junkers Jumo 004 engines, featured a novel forward-swept wing, and apart from the wing was assembled largely from components scavenged from other aircraft. It was one of the very few jet propelled aircraft ever built with fixed landing gear.

<span class="mw-page-title-main">Cessna O-1 Bird Dog</span> Military liaison and observation aircraft

The Cessna L-19/O-1 Bird Dog is a liaison and observation aircraft. It was the first all-metal fixed-wing aircraft ordered for and by the United States Army following the Army Air Forces' separation from it in 1947. The Bird Dog had a lengthy career in the U.S. military, as well as in other countries.

<span class="mw-page-title-main">Northrop YB-35</span> American flying-wing bomber prototype

The Northrop YB-35, Northrop designation N-9 or NS-9, were experimental heavy bomber aircraft developed by the Northrop Corporation for the United States Army Air Forces during and shortly after World War II. The airplane used the radical and potentially very efficient flying wing design, in which the tail section and fuselage are eliminated and all payload is carried in a thick wing. Only prototypes and pre-production aircraft were built, although interest remained strong enough to warrant further development of the design as a jet bomber, under the designation YB-49.

<span class="mw-page-title-main">Cessna Skymaster</span> 1961 utility aircraft family by Cessna

The Cessna Skymaster is an American twin-engine civil utility aircraft built in a push-pull configuration. Its engines are mounted in the nose and rear of its pod-style fuselage. Twin booms extend aft of the wings to the vertical stabilizers, with the rear engine between them. The horizontal stabilizer is aft of the pusher propeller, mounted between and connecting the two booms. The combined tractor and pusher engines produce centerline thrust and a unique sound. The Cessna O-2 Skymaster is a military version of the Cessna 337 Super Skymaster.

<span class="mw-page-title-main">Sikorsky Cypher</span> Unmanned aerial vehicles developed by Sikorsky Aircraft

The Sikorsky Cypher and Cypher II are types of unmanned aerial vehicles developed by Sikorsky Aircraft. They are vertical takeoff and landing aircraft which use two opposing rotors enclosed in a circular shroud for propulsion.

<span class="mw-page-title-main">Wren 460</span> American STOL aircraft

The Wren 460 is a STOL conversion of a Cessna 180 or 182 airframe.

<span class="mw-page-title-main">Cessna 162 Skycatcher</span> American side-by-side two-seat light sport airplane

The Cessna 162 Skycatcher is an American side-by-side two-seat, high-wing, strut-braced, tricycle gear light-sport aircraft (LSA) that was designed and produced by Cessna between December 2009 and December 2013. Its intended market was flight training and personal use.

<span class="mw-page-title-main">Bede BD-10</span> Type of aircraft

The Bede BD-10 was Jim Bede's attempt to introduce the world's first kit-built jet-powered general aviation supersonic aircraft. After several years of testing and modifications, the project was taken over by investors in order to produce fully completed civilian and military training aircraft, but these projects were never realized. Five examples were built; three of these crashed, and the remaining two examples are unflyable.

<span class="mw-page-title-main">Cessna 350 Corvalis</span> American light aircraft design

The Cessna 350 Corvalis is a composite construction, single-engine, normally aspirated, fixed-gear, low-wing general aviation aircraft that was built by Cessna Aircraft until the end of 2010.

The Cessna 160 was an American single-engine, four-seater, high wing, strut-braced, prototype monoplane designed in 1962 by Cessna.

<span class="mw-page-title-main">Cessna 620</span> Prototype pressurized 8 to 10 seat business airplane

The Cessna Model 620 was a prototype American pressurized eight to 10 seat business airplane powered by four piston engines and built by Cessna. The first flight was on 11 August 1956. Only one example was built.

The Cessna 187 was a light aircraft proposed by American manufacturer Cessna in the 1970s. As the newer Model 177 had been intended to replace the 172, so the 187 was intended to replace the 182.

<span class="mw-page-title-main">Southern Cross Aviation SC-1</span> Type of aircraft

The Southern Cross SC-1 was an Australian civil aircraft.

<span class="mw-page-title-main">Cessna XMC</span> American light aircraft demonstrator

The Cessna XMC was a prototype technology demonstrator designed to show advanced aerodynamics and materials. The marketing name of XMC stood for "Experimental Magic Carpet" with the single test aircraft designated Cessna 1014 and later 1034 in company documentation.

<span class="mw-page-title-main">Canaero Toucan</span> Canadian ultralight aircraft

The Canaero Toucan is a Canadian high-wing, two seats in tandem, twin engine push-pull configuration, twin-boom ultralight kit aircraft that was produced from 1983 to the late 1980s by Canaero Dynamics Aircraft of Rexdale, Ontario.

<span class="mw-page-title-main">Lohner Type AA</span> Type of aircraft

The Lohner Type AA were a series of prototype fighters built during World War I. The program would eventually be cancelled due to inherent instability concerns of the design.

<span class="mw-page-title-main">Beechcraft Denali</span> Single engine turboprop airplane by Textron Aviation, 2021

The Beechcraft Denali, also known as the Model 220 and previously the Cessna Denali and Textron "Single Engine Turboprop" (SETP), is an American single engine turboprop aircraft under development by Textron Aviation. Announced at EAA AirVenture Oshkosh 2015, the aircraft is a completely new design, not derived from any existing aircraft. It should compete with the Pilatus PC-12 and Daher-Socata TBM, as well as other new projects such as the One Aviation Kestrel K-350 and the CAIGA Primus 150.

<span class="mw-page-title-main">Cessna 408 SkyCourier</span> Twin-turboprop utility aircraft

The Cessna 408 SkyCourier is an American utility aircraft designed and built by Textron Aviation. It was launched on November 28, 2017 with an order for 50 from FedEx Express. It made its first flight on May 17, 2020, and was type certified on March 11, 2022. FedEx took delivery of the first production model on May 9, 2022.

References

  1. Brian Campbell (1973-09-11). "The History Of... AVE Mizar Flying Pinto". Cookieboystoys.com. Archived from the original on 2011-10-03. Retrieved 2013-06-07.
  2. "Flying Pinto Sprouts Wings". Popular Mechanics . September 1973.
  3. George W. Green (2003). Special Use Vehicles: An Illustrated History of Unconventional Cars and Trucks Worldwide. McFarland. p. 185. ISBN   978-0-7864-2911-0.
  4. Petersen, Petersen's Complete Ford Book 3rd Edition (1973)
  5. 1 2 3 "Car That Can Fly Away Developed in Van Nuys". The Van Nuys News . May 15, 1973.
  6. 1 2 "Flying Automobile Crashes, Burns in Oxnard; 2 Killed". The Los Angeles Times. September 12, 1973. p. 3. Archived from the original on August 5, 2021. Retrieved August 5, 2021 via Newspapers.com.
  7. Soniak, Matt (July 30, 2012). "The Flying Pinto That Killed Its Inventor". Mental Floss. Retrieved August 5, 2021.
  8. Accident report – NTSB Identification: LAX74FUQ18, National Transportation Safety Board
  9. Garrison, Peter (August 1993). "Can We Ever Make A Car Airworthy?". Flying . Retrieved 2012-11-20.