The Sentinel-class cutter, also known as the Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m), it is similar to, but larger than, the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 66 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces Southwest Asia.
USCGC Confidence (WMEC-619) is a United States Coast Guard medium endurance cutter.
SLNS Samudura (P621) is a Sri Lanka Navy Offshore Patrol Vessel. Originally commissioned by the United States Coast Guard in 1968 as the medium endurance cutter USCGC Courageous, she was donated to Sri Lanka in 2004 and commissioned on February 19, 2005.
USCGC Westwind (WAGB-281) was a Wind-class icebreaker that served in the United States Coast Guard as USCGC Westwind (WAG-281), the Soviet Navy as the Severni Polius, and again in the U.S. Coast Guard as USCGC Westwind (WAGB-281).
The Ukrainian patrol vessel Starobilsk (P191) is an Island-class patrol boat of the Naval Forces of Armed Forces of Ukraine.
USS Unimak (AVP-31) was a United States Navy Barnegat-class small seaplane tender in commission from 1943 to 1946 that saw service in World War II. After the war, she was in commission in the United States Coast Guard as the cutter USCGC Unimak (WAVP-379), later WHEC-379, WTR-379, and again WHEC-379, from 1949 to 1975 and from 1977 to 1988.
USS Callaway (APA-35) was a Bayfield-class attack transport that served with the US Navy, and was manned by the United States Coast Guard during World War II.
USCGC Mendota (WHEC-69) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The ship was commissioned three months before the end of the war and did not see combat action until the Vietnam war.
The fifth United States Coast Guard Cutter named Mohawk (WPG-78) was built by Pusey & Jones Corp., Wilmington, Delaware, and launched 1 October 1934. She was commissioned on 19 January 1935.
USCGC Cape Upright was United States Coast Guard steel-hulled patrol boat of the 95-Foot or Cape class.
USCGC Bernard C. Webber (WPC-1101) is the first of the United States Coast Guard's 58 Sentinel-class cutters. Like most of her sister ships, she replaced a 110-foot (34 m) Island-class patrol boat. Bernard C. Webber, and the next five vessels in the class, Richard Etheridge, William Flores, Robert Yered, Margaret Norvell, and Paul Clark, are all based in Miami, Florida.
USCGC Point Thatcher (WPB-82314) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82314 when commissioned and acquired the name Point Thatcher in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m). Point Thatcher was unique because it was the only cutter that was built in the class that was powered using gas turbine main drive engines.
USCGC Point Steele (WPB-82359) was an 82-foot (25 m) Point class cutter constructed at the J.M. Martinac Shipbuilding Corp. yards at Tacoma, Washington, in 1967 for use as a law enforcement and search and rescue patrol boat. The construction was the same as the earlier cutters in the class that were constructed at the Coast Guard Yard. Point Steele was originally named Point Buchon but it is unknown why the name was changed.
USCGC Margaret Norvell (WPC-1105) is the fifth Sentinel-class cutter, based at Miami, Florida. She was launched on January 13, 2012, and delivered to the Coast Guard on March 21, 2013. She was commissioned on June 1, 2013. She was commissioned at Mardi Gras World in New Orleans, near where her namesake, Margaret Norvell, staffed a lighthouse for decades.
The USCGC Hornbeam (WLB-394) was an Iris-class buoy tender belonging to the United States Coast Guard launched on 14 August 1943 and commissioned on 14 April 1944.
USCGC Isaac Mayo is a Sentinel-class cutter homeported in Key West, Florida. She is the twelfth Sentinel class to be delivered, and the sixth of six to be assigned to Key West.
Rollin Arnold Fritch was a United States Coast Guard seaman who died at his weapons station while shooting at a Japanese kamikaze, during World War II.
USCGC Lawrence Lawson is the 20th Sentinel-class cutter to be delivered to the United States Coast Guard. She was built at Bollinger Shipyards, in Lockport, Louisiana, and delivered to the Coast Guard, for her sea trials, on October 20, 2016. She was commissioned on March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second to be stationed outside of the Caribbean.
USCGC Rollin Fritch is the US Coast Guard's 19th Sentinel-class cutter, and the first to be homeported outside of the Caribbean. She is based at the Coast Guard Training Center in Cape May, New Jersey.
USCGC Sweetgum (WAGL-309) was a Mesquite-class buoy tender built in 1943 and operated by the United States Coast Guard. She was later transferred to Panama as SMN Independencia (A-401). The ship was named after a North American tree of the genus Liquidambar having prickly spherical fruit clusters and fragrant sap.
United States
Bahamas
