USCGC Elm (WLB-204)

Last updated
WLB Elm204 2.jpg
USCGC Elm
History
Flag of the United States Coast Guard.svgUnited States
NameUSCGC Elm
BuilderMarinette Marine Corporation
LaunchedJanuary 24, 1998
CommissionedNovember 20, 1998
HomeportAstoria, Oregon
Identification
Nickname(s)"The Bartender"
Statusin active service
Badge USCGC Elm (WLB-204) badge.jpg
General characteristics
Class and type Juniper-class Buoy Tender
Displacement2,000 long tons (full load)
Length225 ft (69 m)
Beam46 ft (14 m)
Draft13 ft (4.0 m)
Installed power
PropulsionOne variable-pitch propeller
Speed
  • 15  kn (28 km/h; 17 mph) at full load displacement
  • (80% rated power)
Range6,000 nmi (11,000 km; 6,900 mi) at 12 kn (22 km/h; 14 mph)
Complement8 officers, 42 enlisted
Armament2 x .50 caliber machine guns, option for 1 x 25mm cannon

USCGC Elm (WLB-204) is a U.S. Coast Guard Juniper-class seagoing buoy tender home-ported in Astoria, Oregon. She is responsible for maintaining aids to navigation on the coasts of Oregon and Washington, including the Columbia River.

Contents

Construction

Elm was built by the Marinette Marine Corporation on the Menominee River in Wisconsin. Elm was launched on January 24, 1998. [1] She was the fourth of the fourteen Juniper-class ships launched. Her original cost was approximately $26 million. [2]

Her hull is constructed of welded steel plates. She is 225 feet (69 m) long and has a beam of 46 feet (14 m). She is capable of maintaining a sustained speed of 15 knots. The ship has thirteen diesel fuel tanks capable of holding 74,498 gallons. [3] Elm has an unrefueled range of 6,000 miles at 12 knots. [4]

USCGC Elm icebreaking in the Hudson River USCGC Elm icebreaking.jpg
USCGC Elm icebreaking in the Hudson River

Elm has a single variable-pitch propeller that is powered by two Caterpillar 3608 Diesel engines, each with an indicated 3,100 shp. There are two electric maneuvering thrusters, the bow thruster producing 460 hp and the stern thruster producing 550 hp. [3] The thrusters act as part of a dynamic positioning system that is capable of maintaining the ship within five meters of a fixed position on the sea in winds up to 30 knots and seas up to 8 feet (2.4 m). This allows the crew to work on buoys in difficult weather conditions. [5]

The ship's crane extends to 60 feet (18 m) and can lift 40,000 pounds (18,000 kg) onto her buoy deck, which is 2,875 square feet in area. [6] [7]

Elm is capable of light icebreaking. She can sail through ice 14 inches (36 cm) thick at three knots. [2]

Elm is armed with two 50-caliber machine guns and a variety of small arms for boarding operations. [4]

Elm and all but one of the Juniper-class buoy tenders are named after trees. She is the third Coast Guard ship of this name. The first Elm was a derrick barge launched in 1919 to maintain aids to navigation in the Hudson River. [8] The second USCGC Elm (WAGL-260/WLI-72260) was a buoy tender launched in 1938. [9]

Operational history

After launch and sea trials, Elm sailed down the Great Lakes and Saint Lawrence Seaway to reach her new homeport of Atlantic Beach, North Carolina. She was based at Coast Guard Station Fort Macon. Her primary mission was to maintain 250 buoys between Shark River Inlet, New Jersey and the border between North and South Carolina, including Chesapeake Bay. [7] She supported other Coast Guard missions as well, including search and rescue, law enforcement, oil spill response, and light icebreaking.

In her search and rescue role, she extinguished a fire aboard the scallop-fishing vessel Captain O. J. Riggs in 2009. [10] Elm was dispatched to search for survivors of the replica HMS Bounty which was sunk by Hurricane Sandy in 2012. [11]

In her law enforcement role, Elm participated in repatriating Cubans attempting to reach the United States in 2007. [12]

Elm served as an icebreaker in the Hudson River [13] and Chesapeake Bay. [14]

USCGC Elm recovers a NOAA weather buoy adrift in the Atlantic USCGC Elm buoy recovery.jpg
USCGC Elm recovers a NOAA weather buoy adrift in the Atlantic

The Deepwater Horizon drilling platform exploded in the Gulf of Mexico in April 2010. In May Elm was deployed to assist in the oil spill response, using her Spilled Oil Recovery System. [15] She succeeded in skimming more than 500,000 gallons of oil during her six-month deployment, more than any other Coast Guard cutter. [16]

Elm was one of the ships that participated in Fleet Week celebrations at Port Everglades in 2006. [17]

In January 2018 Elm went into drydock at the Coast Guard Yard in Baltimore for a mid-life major overhaul. [18] She left the yard on June 13, 2019. [19] On July 15, 2019 Elm reached her new homeport, Astoria, Oregon, replacing Fir, which sailed for Baltimore for her own mid-life overhaul in June 2018. [20] Fir's crew, already familiar with the operating area, took over Elm.

In her new role, Elm is responsible for maintaining 131 floating buoys on the coasts of Oregon and Washington from the California border north to the Strait of Juan de Fuca, and in the Columbia River east to Longview, Washington. [7] She is stationed at Coast Guard Base Tongue Point. In the Spring of 2022 Elm also supported aids to navigation in Northern California, covering for USCGC Alder which sailed to the Coast Guard Yard for its own mid-life overhaul. [21]

Elm has cooperated with NOAA to maintain weather buoys on several occasions in the Atlantic, Caribbean, and Pacific. [22] [15]

Related Research Articles

USCGC <i>Sequoia</i>

USCGC Sequoia (WLB-215) is a United States Coast Guard 225-foot Seagoing Buoy Tender, homeported in Apra Harbor, Naval Base, a deep-water port on the western side of the United States territory of Guam.

<span class="mw-page-title-main">USCG seagoing buoy tender</span> Type of United States Coast Guard Cutter

The USCG seagoing buoy tender is a type of United States Coast Guard Cutter used to service aids to navigation throughout the waters of the United States and wherever American shipping interests require. The U.S. Coast Guard has maintained a fleet of seagoing buoy tenders dating back to its origins in the U.S. Lighthouse Service (USLHS). These ships originally were designated with the hull classification symbol WAGL, but in 1965 the designation was changed to WLB, which is still used today.

USCGC <i>Alder</i> (WLB-216) US Coast Guard Juniper-class seagoing buoy tender

USCGC Alder (WLB-216) is the final Juniper-class, 225-foot (69 m) seagoing buoy tender of the United States Coast Guard.

USCGC <i>Conifer</i>

The USCGC Conifer was a 180 foot seagoing buoy tender. Conifer and her sister ships, commonly referred to as "one-eighties", served as the backbone of the Coast Guard's Aids to Navigation fleet for over 50 years before their replacement by the newer Juniper-class cutters.

USCGC <i>Cactus</i>

USCGC Cactus (WLB-270) is a 180 feet (55 m) seagoing buoy tender (WLB). A Cactus-class vessel, she was built by Marine Ironworks and Shipbuilding Corporation in Duluth, Minnesota. Cactus's preliminary design was completed by the United States Lighthouse Service and the final design was produced by Marine Iron and Shipbuilding Corporation in Duluth. On 31 March 1941 the keel was laid, she was launched on 25 November 1941 and commissioned on 1 September 1942. The original cost for the hull and machinery was $782,381.

USCGC <i>Spar</i> (WLB-206)

USCGC Spar (WLB-206) is a United States Coast Guard Juniper-class seagoing buoy tender home-ported in Duluth, Minnesota. The ship maintains aids to navigation in the Twin Ports and Great Lakes.

USCGC <i>Maple</i>

USCGC Maple (WLB-207) is a Juniper-class seagoing buoy tender operated by the United States Coast Guard. She was based at Sitka, Alaska for 16 years and is currently homeported at Atlantic Beach, North Carolina. Her primary mission is maintaining aids to navigation, but she also supports search and rescue, law enforcement, oil spill response, and other Coast Guard missions.

USCGC <i>Sassafras</i> C-class buoy tender, 1943-2003 (now NNS Obula)

Sassafras is a C-Class, 180 ft, seagoing buoy tender constructed for the USCG by Marine Iron & Shipbuilding Corp. of Duluth, Minnesota. Sassafras was one of 39 tenders commissioned for duties that would include aids-to-navigation, ice breaking, search-and-rescue, fire fighting, law enforcement, providing fuel and potable water, and assistance to the National Oceanographic and Seismographic Survey.

USCGC <i>Oak</i>

The U.S. Coast Guard Cutter Oak is a United States Coast Guard seagoing buoy tender; the second of her name and the eleventh of the Juniper class. Home ported in Newport, Rhode Island the "Maine Responder" maintains Aids to Navigation (ATON) along the rugged New England coastline, promoting economic security through navigation safety of the Marine Transportation System. A multi-mission platform, the cutter can also support search & rescue, domestic icebreaking, living marine resources maritime law enforcement, environmental protection, national defense and homeland security missions. The cutter occasionally assists with maintenance support of the National Oceanic and Atmospheric Administration (NOAA) National Data Buoy Center's offshore weather buoys.

USCGC <i>Juniper</i>

USCGC Juniper (WLB-201) is the lead ship of the U.S. Coast Guard's current class of seagoing buoy tenders. She is outfitted with some of the most advanced technological and navigational capabilities currently available.

USCGC <i>Fir</i> (WLB-213)

USCGC Fir (WLB-213) is a Juniper-class cutter of the United States Coast Guard. USCGC Fir is under the Operational Control (OPCON) of the Commander of the Thirteenth Coast Guard District and is homeported in Astoria, Oregon. Fir's primary area of responsibility is the coastal waters, river bars and high seas of the Washingtonian and Oregonian coasts. USCGC Fir conducts heavy lift aids to navigation operations, law enforcement and other missions as directed.

USCGC <i>Sycamore</i> (WLB-209)

USCGC Sycamore (WLB-209) is a United States Coast Guard seagoing buoy tender, the second of her name and the ninth of the Juniper-class. She is now home-ported in Newport, Rhode Island, following a one year long Midlife Maintenance Availability (MMA) in Baltimore, Maryland. She was originally home-ported in Cordova, Alaska. Sycamore primarily tends to aids-to-navigation (ATON) in Martha's Vineyard, the Long Island Sound, Hudson River, and New York City Harbor and entrances; however she is also responsible for maintenance support of National Data Buoy Center's offshore weather buoys. In addition to her primary ATON role, Sycamore also performs other duties, such as, marine environmental protection, maritime law enforcement, domestic icebreaking, search and rescue, and homeland security missions.

USCGC Tupelo WAGL/WLB-303, was a Cactus (A) Class 180-foot buoy tender vessel built by Zenith Dredge Company of Duluth, Minnesota. Her keel was laid 15 August 1942, launched 28 November 1942 and commissioned on 30 August 1943. She was built as a WAGL and redesignated a WLB in 1965.

USCGC <i>Willow</i> (WLB-202)

The USCGC Willow (WLB-202) is a United States Coast Guard seagoing buoy tender, the third of her name and the second of the Juniper-class. She is home-ported in Charleston, South Carolina, where she replaced her sister ship USCGC Oak in servicing 257 aids to navigation in District 7. Willow's area of operations stretches from South Carolina down to Caribbean, including Puerto Rico, Cuba, U.S. Virgin Islands and Haiti. In addition to her primary aids-to-navigation (ATON) role, Willow also performs other duties, such as maritime border security, marine environmental protection, maritime law enforcement, and search and rescue. The Willow transitioned from her former home port of Newport, RI in 2017 after spending over a year in a Baltimore dry dock being refitted and modernized.

USCGC <i>Aspen</i> Seagoing buoy tender of the United States Coast Guard

USCGC Aspen (WLB-208) is the eighth cutter in the Juniper-class 225 ft (69 m) of seagoing buoy tenders. She is under the operational control of the Commander of the Eleventh U.S. Coast Guard District and is home-ported at Yerba Buena Island in San Francisco, California. Her primary area of responsibility is the coastal waters, river bars and high seas from the California–Oregon border to San Diego, California. Aspen conducts heavy lift aids-to-navigation operations, and law enforcement, homeland security, environmental pollution response, and search and rescue as directed.

USCGC <i>Kukui</i> (WLB-203)

USCGC Kukui (WLB-203) is the third cutter in the Juniper-class 225 ft (69 m) of seagoing buoy tenders and is the third ship to bear the name. She is under the operational control of the Commander of the Seventeenth Coast Guard District and is home-ported in Sitka, Alaska. Her primary area of responsibility is the inland and coastal waters of southeastern Alaska. Kukui conducts heavy lift aids-to-navigation operations, and law enforcement, homeland security, environmental pollution response, and search and rescue as directed.

USCGC <i>Walnut</i> (WLB-205)

USCGC Walnut (WLB-205) is the fifth cutter in the Juniper-class 225 ft (69 m) of seagoing buoy tenders and is the second ship to bear the name. She is under the operational control of the Commander of the Fourteenth Coast Guard District and is home-ported on Sand Island in Honolulu, Hawaii. Her primary area of responsibility is the coastal waters and high seas around the Hawaiian Islands and American Samoa. Walnut conducts heavy lift aids-to-navigation operations, and law enforcement, homeland security, environmental pollution response, and search and rescue as directed.

USCGC <i>Ida Lewis</i>

USCGC Ida Lewis (WLM-551) is the lead ship of the United States Coast Guard Keeper-class of Coastal Buoy Tenders. Launched in 1995, she has spent her entire career maintaining navigational aids near her homeport of Newport, Rhode Island.

USCGC <i>Anthony Petit</i> Keeper-class coastal buoy tender of the United States Coast Guard

USCGC Anthony Petit (WLM-558) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1999, she has served her entire career maintaining navigational aids in Southeast Alaska.

USCGC <i>Ironwood</i>

USCGC Ironwood (WAGL-297/WLB-297) was a Mesquite-class sea-going buoy tender operated by the United States Coast Guard. She served in World War II, the Korean War, and the Vietnam War as well as a variety of domestic missions. She currently serves as a seamanship training vessel for Job Corps.

References

  1. ↑ "Ahoy! High-tech Ship Launched On Menominee River". Green Bay Press-Gazette. January 25, 1998.
  2. 1 2 "U.S. Coast Guards Latest Cutter is just "bigger, faster, and better"". Post-Crescent. July 13, 1998.
  3. 1 2 Desruisseau, Robert C. (1999). Tactical Testing of the Juniper ClassSeagoing Buoy Tender (PDF). US Coast Guard. Archived (PDF) from the original on April 1, 2022.
  4. 1 2 "225-foot Juniper class > United States Coast Guard > Display". www.uscg.mil. Retrieved 2020-05-11.
  5. ↑ THE CUTTERS, BOATS, AND AIRCRAFT OF THE U.S. COAST GUARD (PDF). US Coast Guard.
  6. ↑ Writer, DP Staff (2019-04-08). "U.S. Coast Guard Seagoing Buoy Tender, USCGC Sycamore Arrives in Maryland for Midlife Maintenance Availability". DefPost. Retrieved 2020-05-12.
  7. 1 2 3 "Coast Guard Cutter Elm arrives in Astoria for first time | Coast Guard News" . Retrieved 2020-05-13.
  8. ↑ Annual Report of the Commissioner of Lighthouses to the Secretary of Commerce and Labor for the Fiscal Year Ended 1919. U.S. Government Printing Office. 1919. p. 48.
  9. ↑ "30495". www.history.uscg.mil. Retrieved 2020-05-14.
  10. ↑ "3 Pulled From Ocean After Boat Fire Off N.J." Courier-News. July 20, 2009.
  11. ↑ "Atlantic Search For Tall Ship's Captain Continues". Rocky Mount Telegram. November 1, 2012.
  12. ↑ Bena, Barry (August 3, 2007). "Coast Guard Intercepts, Repatriates 64 Cubans". Pensacola News Journal.
  13. ↑ "US Coast Guard vessel still on duty in Northeast". Jacksonville Daily News. February 4, 2004.
  14. ↑ "Ice on Chesapeake keeps watermen home". Baltimore Sun. January 30, 2014.
  15. 1 2 "USCGC Elm". www.pacificarea.uscg.mil. Retrieved 2020-05-13.
  16. ↑ "Cutter has new commander". Jacksonville Daily News. July 23, 2011.
  17. ↑ "Sea of People for Fleet Week". South Florida Sun Sentinel. May 2, 2006.
  18. ↑ "Coast Guard Cutter Elm leaving for major dry dock overhaul, homeport change". U.S. Coast Guard. Retrieved 2020-05-13.
  19. ↑ Writer, DP Staff (2019-06-14). "U.S. Coast Guard Completes Renovation on Fifth 225-Foot Seagoing Buoy Tender, USCGC Elm". DefPost. Retrieved 2020-05-13.
  20. ↑ "Astoria buoy-tending boat departs for Baltimore". Longview Daily News. June 21, 2018.
  21. ↑ "Coast Guard Buoy Tender Departs San Francisco for Major Maintenance Period". Seapower. 2021-12-01. Retrieved 2022-11-02.
  22. ↑ "Coast Guard crew back at Fort Macon". Jacksonville Daily News. April 25, 2007.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.