RV-15 | |
---|---|
![]() | |
RV-8X, the RV-15 engineering prototype, N7357. | |
Role | Amateur-built aircraft |
National origin | United States |
Manufacturer | Van's Aircraft |
First flight | June 2022 |
Introduction | July 2022 |
Status | Under development (July 2022) |
Number built | one prototype |
The Van's Aircraft RV-15 is an American amateur-built aircraft that is under development by Van's Aircraft of Aurora, Oregon. It was first publicly shown at the AirVenture airshow in July 2022. The aircraft is intended to be supplied as a kit for amateur construction, but as of July 2022 the company was not yet accepting deposits for delivery positions. [1] [2] [3] [4] [5] [6] [7] [8]
The RV-15 will be the first high-wing design for the manufacturer, a company known for its low-wing aircraft. The design was developed based on input from customers. Development was started with a "pine pigeon" wooden mock-up. [2] [4] [5]
The aircraft was designed by a 12-person engineering team starting in 2019. The design team included Van's chief engineer and current president Rian Johnson; Rob Heap, formerly of Scaled Composites and also Cessna; Brian Hickman formerly of Glasair Aviation and Axel Alvarez, a civilian graduate of the United States Naval Test Pilot School. [5] [6]
The prototype was constructed from computer assisted design parts utilizing matched-hole technology, with punch presses and computer numerical control machines working directly from the engineering design drawings. [5]
The first flight was in June 2022 and the engineering prototype was first publicly shown at AirVenture 2022 in July 2022. Kit production is expected to commence by the summer to the end of 2023. [9] [10]
By the end of January 2023, the aircraft had been substantially re-designed as a result of feedback from the flight test program. Changes includes a new wing design with a different internal structure, located further aft; a wider aft fuselage; a more sloped windshield; relocated landing gear and a relocated flap handle from the cockpit ceiling to the floor. Wing tank fuel capacity was increased from 50 to 60 U.S. gallons (190 to 230 L; 42 to 50 imp gal). [11]
The developmental prototype aircraft was again brought to AirVenture in July 2023 and included many more evolutionary design changes incorporated. These included: a greater span stabilator with wider, trimmable anti-servo tabs; re-worked ailerons with shifted hinge points; improved control harmonization, including removal of the rudder counterbalance to reduce sensitivity; plus the engine cant increased to 2.2° down. Planned future changes include a new, lighter wing, new strut design and new fuselage design with the wing located further back, the ability to accept smaller engines, new door design and a new further aft main landing gear position. Deposits were still not being accepted and no pricing had been announced. [12]
The aircraft features a strut-braced high-wing, a two-seats-in-side-by-side configuration enclosed cabin accessed by doors, fixed conventional landing gear with tundra tires and an internal shock absorbing mechanism, plus a single engine in tractor configuration. A tricycle landing gear version is planned. [1] [2] [5]
The aircraft is made from aluminum sheet, with a composite engine cowling. Its wing employs a Steve Smith custom airfoil and mounts large Fowler flaps. The design engine power range is 180 to 225 hp (134 to 168 kW) and the standard engine used is the 210 hp (157 kW) Lycoming IO-390 four-stroke powerplant, driving a 80-inch Hartzell Propeller Trailblazer three-blade, constant-speed propeller. The Lycoming O-360 will be an option. [5] [11]
The tail is an all-flying stabilator type with a trim tab plus an anti-servo tab. The stabilator is intended to provide greater pitch authority at less weight. [5]
The main and tailwheels use suspension made by Monster Shocks of Lincoln, California. [5]
The rudder uses cable controls, while the stabilator and ailerons use push-pull tubes. The flaps will likely end up as cable-operated and were initially intended to have a cockpit ceiling-mounted flap actuation handle, later changed to a floor-mounted handle. [5] [11]
The crew doors are steel-tube frames with Plexiglas. There is a large baggage compartment behind the seats, accessed via an external door. [5]
The aircraft has a design goal cruising speed of 140 kn (259 km/h). [10]
By July 2022, one example had been registered in the United States with the Federal Aviation Administration, the engineering test prototype, indicated as an RV-8X. [13]
In a review written at the factory while trying out the incomplete prototype, KitPlanes writer Paul Dye noted, "Visibility from the cockpit on the ground appears to be excellent. Comparing it to similar taildragging high-wings, I’d have to say that it is superior to most. The upright seating allows you to easily move your head forward to see around the forward door post if required to see what’s coming up in a turn. And the view over the top cowl was excellent for taxiing. The design eye height is fairly high in the cockpit, and an extra cushion (on top of the temporary seats) was required to get my average height up to that level—but once I did, it sort of felt like I was sitting in an Air Tractor, casually surveying a large domain. I liked it!" [5]
An Aircraft Owners and Pilots Association review by Dave Hirschman noted, "Van’s officials are notoriously tight-lipped about the RV–15's performance figures, but they did say they set ambitious design goals and they expect the new airplane to meet them. For example, they wanted the RV–15 to take off and land in 400 feet or less, and have a top speed in level flight of at least 140 knots." [8]
General characteristics
Performance
The Piper PA-28 Cherokee is a family of two-seat or four-seat light aircraft built by Piper Aircraft and designed for flight training, air taxi and personal use. The PA-28 family of aircraft comprises all-metal, unpressurized, single piston-engined airplanes with low-mounted wings and tricycle landing gear. They have a single door on the right side, which is entered by stepping on the wing.
Van's Aircraft, Inc. is an American kit aircraft manufacturer founded by Richard "Van" VanGrunsven in 1973. The Van's RV series aircraft are all-aluminum, low-wing monoplanes of monocoque construction. In 2023, over 11,000 Van's aircraft were flying worldwide, one third of the USA's experimental aircraft fleet.
The Barrows Bearhawk, now also called the Bearhawk 4-Place, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.
The Thorp T-18 is an American, two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.
The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.
The Van's RV-3 is a single-seat, single-engine, low-wing kit aircraft sold by Van's Aircraft. Unlike many other aircraft in the RV line, the RV-3 is only available as a tail-wheel equipped aircraft, although it is possible that some may have been completed by builders as nose-wheel versions. The RV-3 is the genesis design for the rest of the RV series, all which strongly resemble the RV-3. The RV-4 was originally developed as a two-seat RV-3.
The Van's RV-12 is an American two-seat, single-engine, low-wing homebuilt airplane eligible for the U.S. E-LSA category, sold in kit form and as a complete ready-to-fly aircraft by Van's Aircraft of Aurora, Oregon.
The Liberty XL2 is a two-seat, low-wing, general aviation aircraft manufactured from 2004–2011 by Liberty Aerospace of Melbourne, Florida. A derivative of the Europa XS kit plane, it serves both as a touring aircraft for private flyers and as a flight trainer.
The Diamond DA40 Diamond Star is an Austrian four-seat, single-engine, light aircraft constructed from composite materials. Built in both Austria and Canada, it was developed as a four-seat version of the earlier DA20 by Diamond Aircraft Industries.
The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane manufactured by the American company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.
The Lycoming IO-390 engine is a horizontally opposed, four-cylinder aircraft engine, manufactured by Lycoming Engines.
The RV-1 is a Stits Playboy that was constructed with modifications by Richard VanGrunsven. The aircraft was the first of a series of Van's aircraft that became the most popular homebuilt aircraft produced.
The Van's Aircraft RV-14 is an American aerobatic kit aircraft designed by Richard VanGrunsven and produced by Van's Aircraft. It was introduced at AirVenture in July 2012. The aircraft is supplied as a kit for amateur construction.
The CubCrafters Carbon Cub EX is an American amateur-built aircraft, designed and produced by Cub Crafters of Yakima, Washington. The aircraft is supplied as a kit for amateur construction.
The Sling Aircraft Sling 4 is a South African kit aircraft. It is a development of the Sling 2 to accommodate four people, produced by Sling Aircraft of Johannesburg, South Africa.
The CubCrafters CC19 XCub is an American light aircraft, designed and produced by Cub Crafters of Yakima, Washington, introduced in June 2016. The aircraft is supplied complete and ready-to-fly.
The Sling TSi is a South African four-seat, single-engine, low-wing homebuilt aircraft sold in kit form by Sling Aircraft of Johannesburg South. It was developed from the Sling 4.
The Lancair Barracuda is an American amateur-built aircraft produced by Lancair of Uvalde, Texas. It was introduced at AirVenture in July 2018. The aircraft is supplied as a kit for amateur construction.
The Bearhawk 5 is a five-to-six seat American amateur-built aircraft, designed by Bob Barrows and under development by Bearhawk Aircraft. The aircraft is supplied as a kit for amateur construction.
The Murphy Radical is a Canadian STOL amateur-built aircraft that was designed by Darryl Murphy and is under development by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.
{{cite web}}
: CS1 maint: bot: original URL status unknown (link)