Zip fuel

Last updated

Zip fuel, also known as high energy fuel (HEF), is any member of a family of jet fuels containing additives in the form of hydro-boron compounds, or boranes . Zip fuels offer higher energy density than conventional fuels, helping extend the range of jet aircraft. In the 1950s, when the short range of jet aircraft was a major problem for military planners, zip fuels were a topic of significant study.

Contents

A number of aircraft were designed to make use of zip, including the XB-70 Valkyrie, XF-108 Rapier, as well as the BOMARC, and even the nuclear-powered aircraft program. The Navy considered converting all of their jet engines to zip and began studies of converting their aircraft carriers to safely store it.

In testing, the fuels proved to have several serious problems, and the entire effort was eventually cancelled in 1959.

Description

The highest energy-density fuel (by weight) in common propellant combinations is hydrogen. However, gaseous hydrogen has very low (volume) density; liquified hydrogen has higher density but is complex and expensive to store. When combined with carbon, hydrogen can be rendered into the easily burnable hydrocarbon fuels. Other elements, like aluminum and beryllium, have even higher energy content than carbon, but do not mix well to form a stable fuel that can be easily burned. [1]

Of all the low-mass elements, boron has the combination of high energy, low weight and wide availability that makes it interesting as a potential fuel. [1] Boranes have a high specific energy, about 70,000 kJ/kg (30,000 BTU/lb). This compares favorably to a typical kerosene-based fuel, such as JP-4 or RP-1, which provides about 42,000 kJ/kg (18,000 BTU/lb). [2] They are not suitable for burning as a fuel on their own, however, as they are often prone to self-ignition in contact with air, making them dangerous to handle. [3]

When mixed with conventional jet fuels, they add to the energy content while becoming somewhat more stable. In general terms, boron-enhanced fuels offer up to 40% higher energy density than plain JP-4 in terms of both weight and volume. [3] [4] In the US a whole family of fuels were investigated, and generally referred to by the names they were assigned during the Air Force's Project HEF: HEF-1 (ethyldiborane), HEF-2 (propylpentaborane), HEF-3 (ethyldecaborane), HEF-4 (methyldecaborane), and HEF-5 (ethylacetylenedecaborane). [4]

Zip fuels have a number of disadvantages. For one, the fuel is toxic, as is its exhaust. This was of little concern in flight, but a major concern for ground crews servicing the aircraft. The fuels burn to create solids that are both sticky and corrosive, while boron carbide solids are abrasive. This caused serious problems for turbine blades in jet engines, where the exhaust built up on the blades and reduced their effectiveness and sometimes caused catastrophic failure of the engine. [5] [6] Finally, the exhaust plume is filled with particulates, as with coal smoke, allowing an aircraft to be spotted visually at long range.

In the end, the problem of burning HEF throughout the entire engine proved impossible to solve. Removing the buildup was difficult, and the wear it caused was something that materials science was unable to address. It was possible to burn it with relative ease in an afterburner, but this would only be effective on aircraft that used an afterburner for extended periods of time. Combined with the high cost of producing the fuel and the toxicity issues, the value of zip fuel was seriously reduced.

After interest in boranes as jet fuel waned, some small-scale research into their use as rocket fuel continued. This too proved to be a dead-end, as the solid boron oxides in the combustion products interfered with the expected thermodynamics, and the thrust advantages could not be realized. [7]

History

Several studies were made into boronated fuels over the years, starting with the U.S. Army's rocket-related Project HERMES in the late 1940s, the U.S. Navy Bureau of Aeronautics's Project ZIP in 1952, [3] and the U.S. Air Force's Project HEF (High Energy Fuels) in 1955. [8] For much of the 1950s, zip fuels were considered to be the "next big thing" and considerable funds were expended on these projects in an effort to bring them into service. The Navy's name stuck, and all the boronated fuels became known as "zip fuels", although the Air Force's naming for the fuels themselves became common.

The main thrust of the Air Force's program was based on HEF-3, which seemed to be the most likely candidate for quick introduction. HEF became part of the WS-110 efforts to build a new long-range bomber to replace the B-52 Stratofortress with a design able to dash at speeds up to Mach 2. The initial designs from Boeing and North American Aviation (NAA) both used conventional fuels for takeoff and cruise, switching to HEF during the high-speed dash, burning it only in their afterburner sections. [9] This avoided the main problems with HEF; by burning it only in the afterburners the problem with buildup on the turbine was eliminated, and since the afterburners were only used for takeoff and high-speed flight, the problems with the toxic exhaust were greatly reduced.

When the initial designs proved to be too expensive to justify their relatively small performance improvement, both returned to the drawing board and came up with new designs that flew at supersonic speeds for most of a combat mission. These designs were based around new engines designed for sustained high-speed flight, with the NAA B-70 Valkyrie and General Electric J93 progressing to the prototype stage. In these cases the afterburners were used for a longer period, maximizing the benefits of HEF. There were plans to introduce a later version of the J93 that would burn HEF-4 throughout. Meanwhile, there were also studies on using HEF-3 in the BOMARC ramjets, [10] as well as studies about carrying it on the U.S. Navy's aircraft carrier fleet to power future aircraft, but these programs both died out.

As the problems were proving intractable, the Air Force canceled their program in 1959, and interest in zip essentially disappeared. By this point the only design still considering using HEF was the XB-70 and its J93. NAA and General Electric responded by redesigning the engine to run on a new higher-density form of jet fuel, JP-6, and filling one of the two bomb bays with a new fuel tank. In doing so the range was dramatically reduced from about 7,700 to 5,500 nautical miles (14,300 to 10,200 km). [4] This reduced the selection of targets that could be attacked from the US and required in-flight refueling for every mission profile, one more problem that led to the project's eventual re-direction as a purely experimental aircraft.

It is estimated that the US spent about $1 billion on the program, in 2001 inflation-adjusted dollars. [8] At least five HEF production plants were built in the US, and two workers were killed in an explosion that destroyed one plant in New York. [8] [11] Most of the program was classified Top Secret while being carried out, but nevertheless it was widely covered both in the trade press and civilian newspapers. [12] Both the US and Soviet Union independently declassified their research in 1964.

One potentially lasting relic of the HEF program is an abandoned dirt airfield outside Boron, California. Marked on USGS topographical maps as "Air Force Plant #72", nothing but the airstrip and a water tank were ever built on the site. It is speculated that this would have been a factory for HEF fuel, using the large borax deposits nearby (giving the town its name), where it could be easily shipped to Edwards Air Force Base. [4] Another offshoot of zip fuel research is the use of triethylborane as an ignition agent for the JP-7 fuel used in the SR-71 Blackbird.

Related Research Articles

<span class="mw-page-title-main">Jet engine</span> Aircraft engine that produces thrust by emitting a jet of gas

A jet engine is a type of reaction engine, discharging a fast-moving jet of heated gas that generates thrust by jet propulsion. While this broad definition may include rocket, water jet, and hybrid propulsion, the term jet engine typically refers to an internal combustion air-breathing jet engine such as a turbojet, turbofan, ramjet, pulse jet, or scramjet. In general, jet engines are internal combustion engines.

<span class="mw-page-title-main">Ramjet</span> Supersonic atmospheric jet engine

A ramjet is a form of airbreathing jet engine that requires forward motion of the engine to provide air for combustion. Ramjets work most efficiently at supersonic speeds around Mach 3 and can operate up to Mach 6.

<span class="mw-page-title-main">Liquid hydrogen</span> Liquid state of the element hydrogen

Liquid hydrogen (H2(l)) is the liquid state of the element hydrogen. Hydrogen is found naturally in the molecular H2 form.

<span class="mw-page-title-main">Turbofan</span> Airbreathing jet engine designed to provide thrust by driving a fan

A turbofan or fanjet is a type of airbreathing jet engine that is widely used in aircraft propulsion. The word "turbofan" is a combination of references to the preceding generation engine technology of the turbojet and the additional fan stage. It consists of a gas turbine engine which achieves mechanical energy from combustion, and a ducted fan that uses the mechanical energy from the gas turbine to force air rearwards. Thus, whereas all the air taken in by a turbojet passes through the combustion chamber and turbines, in a turbofan some of that air bypasses these components. A turbofan thus can be thought of as a turbojet being used to drive a ducted fan, with both of these contributing to the thrust.

<span class="mw-page-title-main">Turbojet</span> Airbreathing jet engine which is typically used in aircraft

The turbojet is an airbreathing jet engine which is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes, a compressor, a combustion chamber, and a turbine. The compressed air from the compressor is heated by burning fuel in the combustion chamber and then allowed to expand through the turbine. The turbine exhaust is then expanded in the propelling nozzle where it is accelerated to high speed to provide thrust. Two engineers, Frank Whittle in the United Kingdom and Hans von Ohain in Germany, developed the concept independently into practical engines during the late 1930s.

<span class="mw-page-title-main">North American XB-70 Valkyrie</span> Prototype supersonic strategic bomber

The North American Aviation XB-70 Valkyrie is a retired prototype version of the planned B-70 nuclear-armed, deep-penetration supersonic strategic bomber for the United States Air Force Strategic Air Command. Designed in the late 1950s by North American Aviation (NAA) to replace the B-52 Stratofortress and B-58 Hustler, the six-engined, delta-winged Valkyrie could cruise for thousands of miles at Mach 3+ while flying at 70,000 feet (21,000 m).

<span class="mw-page-title-main">Rocket engine</span> Non-air breathing jet engine used to propel a missile or vehicle

A rocket engine uses stored rocket propellants as the reaction mass for forming a high-speed propulsive jet of fluid, usually high-temperature gas. Rocket engines are reaction engines, producing thrust by ejecting mass rearward, in accordance with Newton's third law. Most rocket engines use the combustion of reactive chemicals to supply the necessary energy, but non-combusting forms such as cold gas thrusters and nuclear thermal rockets also exist. Vehicles propelled by rocket engines are commonly used by ballistic missiles and rockets. Rocket vehicles carry their own oxidiser, unlike most combustion engines, so rocket engines can be used in a vacuum to propel spacecraft and ballistic missiles.

A propellant is a mass that is expelled or expanded in such a way as to create a thrust or another motive force in accordance with Newton's third law of motion, and "propel" a vehicle, projectile, or fluid payload. In vehicles, the engine that expels the propellant is called a reaction engine. Although technically a propellant is the reaction mass used to create thrust, the term "propellant" is often used to describe a substance which contains both the reaction mass and the fuel that holds the energy used to accelerate the reaction mass. For example, the term "propellant" is often used in chemical rocket design to describe a combined fuel/propellant, although the propellants should not be confused with the fuel that is used by an engine to produce the energy that expels the propellant. Even though the byproducts of substances used as fuel are also often used as a reaction mass to create the thrust, such as with a chemical rocket engine, propellant and fuel are two distinct concepts.

<span class="mw-page-title-main">Afterburner</span> Turbojet engine component

An afterburner is an additional combustion component used on some jet engines, mostly those on military supersonic aircraft. Its purpose is to increase thrust, usually for supersonic flight, takeoff, and combat. The afterburning process injects additional fuel into a combustor in the jet pipe behind the turbine, "reheating" the exhaust gas. Afterburning significantly increases thrust as an alternative to using a bigger engine with its attendant weight penalty, but at the cost of increased fuel consumption which limits its use to short periods. This aircraft application of "reheat" contrasts with the meaning and implementation of "reheat" applicable to gas turbines driving electrical generators and which reduces fuel consumption.

<span class="mw-page-title-main">Aviation fuel</span> Fuel used to power aircraft

Aviation fuels are petroleum-based fuels, or petroleum and synthetic fuel blends, used to power aircraft. They have more stringent requirements than fuels used for ground use, such as heating and road transport, and contain additives to enhance or maintain properties important to fuel performance or handling. They are kerosene-based for gas turbine-powered aircraft. Piston-engined aircraft use leaded gasoline and those with diesel engines may use jet fuel (kerosene). By 2012, all aircraft operated by the U.S. Air Force had been certified to use a 50-50 blend of kerosene and synthetic fuel derived from coal or natural gas as a way of stabilizing the cost of fuel.

<span class="mw-page-title-main">Pratt & Whitney J58</span> High-speed jet engine by Pratt & Whitney

The Pratt & Whitney J58 is an American jet engine that powered the Lockheed A-12, and subsequently the YF-12 and the SR-71 aircraft. It was an afterburning turbojet engine with a unique compressor bleed to the afterburner that gave increased thrust at high speeds. Because of the wide speed range of the aircraft, the engine needed two modes of operation to take it from stationary on the ground to 2,000 mph (3,200 km/h) at altitude. It was a conventional afterburning turbojet for take-off and acceleration to Mach 2 and then used permanent compressor bleed to the afterburner above Mach 2. The way the engine worked at cruise led it to be described as "acting like a turboramjet". It has also been described as a turboramjet based on incorrect statements describing the turbomachinery as being completely bypassed.

<span class="mw-page-title-main">Pentaborane(9)</span> Chemical compound

Pentaborane(9) is an inorganic compound with the formula B5H9. It is one of the most common boron hydride clusters, although it is a highly reactive compound. Because of its high reactivity with oxygen, it was once evaluated as rocket or jet fuel. Like many of the smaller boron hydrides, pentaborane is colourless, diamagnetic, and volatile. It is related to pentaborane(11).

A jet engine performs by converting fuel into thrust. How well it performs is an indication of what proportion of its fuel goes to waste. It transfers heat from burning fuel to air passing through the engine. In doing so it produces thrust work when propelling a vehicle but a lot of the fuel is wasted and only appears as heat. Propulsion engineers aim to minimize the degradation of fuel energy into unusable thermal energy. Increased emphasis on performance improvements for commercial airliners came in the 1970s from the rising cost of fuel.

<span class="mw-page-title-main">Flare (countermeasure)</span> Aerial defence against heat-seeking missiles

A flare or decoy flare is an aerial infrared countermeasure used by an aircraft to counter an infrared homing ("heat-seeking") surface-to-air missile or air-to-air missile. Flares are commonly composed of a pyrotechnic composition based on magnesium or another hot-burning metal, with burning temperature equal to or hotter than engine exhaust. The aim is to make the infrared-guided missile seek out the heat signature from the flare rather than the aircraft's engines.

<span class="mw-page-title-main">Air turborocket</span>

The air turborocket is a form of combined-cycle jet engine. The basic layout includes a gas generator, which produces high pressure gas, that drives a turbine/compressor assembly which compresses atmospheric air into a combustion chamber. This mixture is then combusted before leaving the device through a nozzle and creating thrust.

<span class="mw-page-title-main">Components of jet engines</span> Brief description of components needed for jet engines

This article briefly describes the components and systems found in jet engines.

An airbreathing jet engine is a jet engine in which the exhaust gas which supplies jet propulsion is atmospheric air, which is taken in, compressed, heated, and expanded back to atmospheric pressure through a propelling nozzle. Compression may be provided by a gas turbine, as in the original turbojet and newer turbofan, or arise solely from the ram pressure of the vehicle's velocity, as with the ramjet and pulsejet.

<span class="mw-page-title-main">Internal combustion engine</span> Engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber

An internal combustion engine is a heat engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is typically applied to pistons, turbine blades, a rotor, or a nozzle. This force moves the component over a distance. This process transforms chemical energy into kinetic energy which is used to propel, move or power whatever the engine is attached to.

Space Engine Systems Inc. (SES) is a Canadian aerospace company and is located in Edmonton, Alberta, Canada. The main focus of the company is the development of a light multi-fuel propulsion system to power a reusable spaceplane and hypersonic cruise vehicle. Pumps, compressors, gear boxes, and other related technologies being developed are integrated into SES's major R&D projects. SES has collaborated with the University of Calgary to study and develop technologies in key technical areas of nanotechnology and high-speed aerodynamics.

Aircraft engine performance refers to factors including thrust or shaft power for fuel consumed, weight, cost, outside dimensions and life. It includes meeting regulated environmental limits which apply to emissions of noise and chemical pollutants, and regulated safety aspects which require a design that can safely tolerate environmental hazards such as birds, rain, hail and icing conditions. It is the end product that an engine company sells.

References

  1. 1 2 Cracknell pg. 332
  2. ↑ Hawthorne
  3. 1 2 3 Griswold, pg. 88
  4. 1 2 3 4 Airfields
  5. ↑ Griswold 1957, p. 89.
  6. ↑ Clark 1972, p. 123.
  7. ↑ Clark 1972, p. 122.
  8. 1 2 3 Schubert
  9. ↑ Cracknell pg. 334
  10. ↑ Griswold, pg. 87
  11. ↑ Dequasie, pp. 73–76
  12. ↑ "Boron Bomber, RAF Flying Review, September 1958

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.