A zograscope is an optical device for magnifying flat pictures that also has the property of enhancing the sense of the depth shown in the picture. It consists of a large magnifying lens through which the picture is viewed. Devices containing only the lens are sometimes referred to as graphoscopes. Other models have the lens mounted on a stand in front of an angled mirror. This allows someone to sit at a table and to look through the lens at the picture flat on the table. Pictures viewed in this way need to be left-right reversed; this is obvious in the case of writing. A print made for this purpose, typically with extensive graphical projection perspective, is called a vue d'optique or "perspective view".
Zograscopes were popular during the later half of the 18th century as parlour entertainments. [1] Most existing ones from that time are fine furniture, with turned stands, mouldings, brass fittings, and fine finishes.
According to Michael Quinion, the origin of the term is lost, but it is also known as a diagonal mirror, as an optical pillar machine, or as an optical diagonal machine. [2]
In Japan, the zograscope became known as 和蘭眼鏡 (Oranda megane, 'Dutch glasses') or 覗き眼鏡 (nozoki megane 'peeping glasses'), and the pictures were known as 眼鏡絵 ( megane-e , 'optique picture') 繰絵 (karakuri-e 'tricky picture').
Zograscopes created an unprecedentedly realistic experience of depicted scenes, so much so that Blake (2003) described it as "virtual reality". [5] A zograscope allowed viewers to move their eyes over very large scenes, yielding an immersive experience.
Koenderink et al. (2013) showed that viewing photographs with a zograscope allowed observers to see depicted objects, such as Rodin's Danaid (Rodin), in objectively measured depth. [11]
Magnification of images was well understood by the time the first devices were constructed in the early 18th century. Basically, the image is placed at the focal point of a biconvex or plano-convex lens (a magnifying glass) allowing someone to view the magnified image at varying distances on the other side of the lens. [11] Court and von Rorh (1935) suggested that the popularity of the early French models was because they allowed presbyopic purchasers to see the images clearly despite the French fashion against wearing glasses. [9] But Chaldecott (1953) doubted this could have been the sole reason for the devices' enduring popularity, leaving the major factor to be the realistic appearance of the depicted images. [3]
A zograscope makes a realistic experience for someone looking through it is by enhancing depth perception. One way is by minimizing other depth cues that specify the flatness and pictorial nature of the picture. The image is magnified, perhaps giving it a visual angle similar to the real scene the picture is depicting. The edges of the picture are blocked by the frame of the lens. The light coming from the lens to the eye is collimated, preventing accommodation. In early prints of interior scenes, some objects were hand-tinted with saturated colors whereas the background was tinted with "a pale wash" [5] exploiting color contrast as a depth cue. [12]
A second way a zograscope could enhance depth perception is by creating binocular stereopsis. Because each eye views the image from a different position, the surface of the picture could have binocular disparity from different magnification for the two eyes or from differences in the rotation of the images received by the eyes, so-called cyclodisparity. [11] Such disparities create an overall slant of the picture surface around the vertical meridian [13] or horizontal meridian [14] respectively. As well, coloured parts of the image will be refracted differently for each eye, creating a version of chromostereopsis. Even if the binocular disparity were incorrect for the surface of the image or any coloured parts of it, the stereoscopic information tends to integrate with the other depth information in the image.
A simple zograscope can be built from a frame (by cutting a rectangular opening in the bottom of a cardboard box) and placing in the frame a large, magnifying, fresnel lens available from stationery stores. When this is placed over a computer monitor displaying a photograph of a natural scene, the depicted depth will be enhanced.
Binoculars or field glasses are two refracting telescopes mounted side-by-side and aligned to point in the same direction, allowing the viewer to use both eyes when viewing distant objects. Most binoculars are sized to be held using both hands, although sizes vary widely from opera glasses to large pedestal-mounted military models.
In photography and cinematography, a normal lens is a lens that reproduces a field of view that appears "natural" to a human observer. In contrast, depth compression and expansion with shorter or longer focal lengths introduces noticeable, and sometimes disturbing, distortion.
In photography and cinematography, a wide-angle lens is a lens covering a large angle of view. Conversely, its focal length is substantially smaller than that of a normal lens for a given film plane. This type of lens allows more of the scene to be included in the photograph, which is useful in architectural, interior, and landscape photography where the photographer may not be able to move farther from the scene to photograph it.
Stereoscopy is a technique for creating or enhancing the illusion of depth in an image by means of stereopsis for binocular vision. The word stereoscopy derives from Greek στερεός (stereos) 'firm, solid' and σκοπέω (skopeō) 'to look, to see'. Any stereoscopic image is called a stereogram. Originally, stereogram referred to a pair of stereo images which could be viewed using a stereoscope.
Depth perception is the ability to perceive distance to objects in the world using the visual system and visual perception. It is a major factor in perceiving the world in three dimensions.
A stereoscope is a device for viewing a stereoscopic pair of separate images, depicting left-eye and right-eye views of the same scene, as a single three-dimensional image.
An autostereogram is a two-dimensional (2D) image that can create the optical illusion of a three-dimensional (3D) scene. Autostereograms use only one image to accomplish the effect while normal stereograms require two. The 3D scene in an autostereogram is often unrecognizable until it is viewed properly, unlike typical stereograms. Viewing any kind of stereogram properly may cause the viewer to experience vergence-accommodation conflict.
A magnifying glass is a convex lens that is used to produce a magnified image of an object. The lens is usually mounted in a frame with a handle. Beyond its primary function of magnification, this simple yet ingenious tool serves a variety of purposes. It can be employed to focus sunlight, harnessing the Sun's rays to create a concentrated hot spot at the lens's focus, which is often used for starting fires.
A 3D display is a display device capable of conveying depth to the viewer. Many 3D displays are stereoscopic displays, which produce a basic 3D effect by means of stereopsis, but can cause eye strain and visual fatigue. Newer 3D displays such as holographic and light field displays produce a more realistic 3D effect by combining stereopsis and accurate focal length for the displayed content. Newer 3D displays in this manner cause less visual fatigue than classical stereoscopic displays.
A pseudoscope is a binocular optical instrument that reverses depth perception. It is used to study human stereoscopic perception. Objects viewed through it appear inside out, for example: a box on a floor would appear as a box-shaped hole in the floor.
An optical instrument is a device that processes light waves, either to enhance an image for viewing or to analyze and determine their characteristic properties. Common examples include periscopes, microscopes, telescopes, and cameras.
Stereopsis is the component of depth perception retrieved through binocular vision. Stereopsis is not the only contributor to depth perception, but it is a major one. Binocular vision happens because each eye receives a different image because they are in slightly different positions in one's head. These positional differences are referred to as "horizontal disparities" or, more generally, "binocular disparities". Disparities are processed in the visual cortex of the brain to yield depth perception. While binocular disparities are naturally present when viewing a real three-dimensional scene with two eyes, they can also be simulated by artificially presenting two different images separately to each eye using a method called stereoscopy. The perception of depth in such cases is also referred to as "stereoscopic depth".
A raree show, peep show or peep box is an exhibition of pictures or objects, viewed through a small hole or magnifying glass. In 17th and 18th century Europe, it was a popular form of entertainment provided by wandering showmen.
The megalethoscope is a larger version (mega-) of the alethoscope, which it largely superseded, and both are instruments for viewing single photographs with a lens to enlarge and to create some illusion of three-dimensionality. They were used to view photographic albumen prints that were coloured, perforated and mounted on a curved frame. Night effects were achieved when viewing pictures in transmitted light from a fitted oil or kerosine lamp and a daytime version of the same scene was seen when lit by the reflected light from two side mirrors. They are sophisticated versions of the peep show, and were designed by Carlo Ponti of Venice before 1862. Lke the similar graphoscope which descends from the eighteenth century zograscope predating photography, these devices were, and are, often confused with the stereoscope which was of a different design and effect. Improvements to the megalethoscope over the alethoscope, mainly the addition of a compound lens, are detailed in The Practical Mechanic's Journal of 1867.
Autostereoscopy is any method of displaying stereoscopic images without the use of special headgear, glasses, something that affects vision, or anything for eyes on the part of the viewer. Because headgear is not required, it is also called "glasses-free 3D" or "glassesless 3D".
Parallax scanning depth enhancing imaging methods rely on discrete parallax differences between depth planes in a scene. The differences are caused by a parallax scan. When properly balanced (tuned) and displayed, the discrete parallax differences are perceived by the brain as depth.
Chromostereopsis is a visual illusion whereby the impression of depth is conveyed in two-dimensional color images, usually of red–blue or red–green colors, but can also be perceived with red–grey or blue–grey images. Such illusions have been reported for over a century and have generally been attributed to some form of chromatic aberration.
The stereo, stereoscopic or dissecting microscope is an optical microscope variant designed for low magnification observation of a sample, typically using light reflected from the surface of an object rather than transmitted through it. The instrument uses two separate optical paths with two objectives and eyepieces to provide slightly different viewing angles to the left and right eyes. This arrangement produces a three-dimensional visualization of the sample being examined. Stereomicroscopy overlaps macrophotography for recording and examining solid samples with complex surface topography, where a three-dimensional view is needed for analyzing the detail.
A 3D stereo view is the viewing of objects through any stereo pattern.
In Japanese art, a megane-e is a print designed using graphical perspective techniques and viewed through a convex lens to produce a three-dimensional effect. The term derives from the French vue d'optique. The device used to view them was called an Oranda megane or nozoki megane, and the pictures were also known as karakuri-e.